From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
dmurphy@ti.com
Cc: alsa-devel@alsa-project.org
Subject: [PATCH v2 23/23] ASoC: tas2552: Code, define alignment changes for uniformity
Date: Thu, 4 Jun 2015 16:04:35 +0300 [thread overview]
Message-ID: <1433423075-14142-24-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1433423075-14142-1-git-send-email-peter.ujfalusi@ti.com>
Align the numbers in the header file to the same column.
At the same time change the wrapping of CFG_2 register write in the probe
function to be uniform with the other calls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
sound/soc/codecs/tas2552.c | 4 ++--
sound/soc/codecs/tas2552.h | 10 +++++-----
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c
index fe8a988e0a4a..21d8e1d764a2 100644
--- a/sound/soc/codecs/tas2552.c
+++ b/sound/soc/codecs/tas2552.c
@@ -607,8 +607,8 @@ static int tas2552_codec_probe(struct snd_soc_codec *codec)
snd_soc_write(codec, TAS2552_BOOST_APT_CTRL, TAS2552_APT_DELAY_200 |
TAS2552_APT_THRESH_20_17);
- snd_soc_write(codec, TAS2552_CFG_2, TAS2552_BOOST_EN |
- TAS2552_APT_EN | TAS2552_LIM_EN);
+ snd_soc_write(codec, TAS2552_CFG_2, TAS2552_BOOST_EN | TAS2552_APT_EN |
+ TAS2552_LIM_EN);
return 0;
diff --git a/sound/soc/codecs/tas2552.h b/sound/soc/codecs/tas2552.h
index 364c6dd8e79b..13f8d1be1e06 100644
--- a/sound/soc/codecs/tas2552.h
+++ b/sound/soc/codecs/tas2552.h
@@ -19,7 +19,7 @@
#define __TAS2552_H__
/* Register Address Map */
-#define TAS2552_DEVICE_STATUS 0x00
+#define TAS2552_DEVICE_STATUS 0x00
#define TAS2552_CFG_1 0x01
#define TAS2552_CFG_2 0x02
#define TAS2552_CFG_3 0x03
@@ -33,12 +33,12 @@
#define TAS2552_BTIP 0x0b
#define TAS2552_BTS_CTRL 0x0c
#define TAS2552_RESERVED_0D 0x0d
-#define TAS2552_LIMIT_RATE_HYS 0x0e
-#define TAS2552_LIMIT_RELEASE 0x0f
-#define TAS2552_LIMIT_INT_COUNT 0x10
+#define TAS2552_LIMIT_RATE_HYS 0x0e
+#define TAS2552_LIMIT_RELEASE 0x0f
+#define TAS2552_LIMIT_INT_COUNT 0x10
#define TAS2552_PDM_CFG 0x11
#define TAS2552_PGA_GAIN 0x12
-#define TAS2552_EDGE_RATE_CTRL 0x13
+#define TAS2552_EDGE_RATE_CTRL 0x13
#define TAS2552_BOOST_APT_CTRL 0x14
#define TAS2552_VER_NUM 0x16
#define TAS2552_VBAT_DATA 0x19
--
2.4.2
next prev parent reply other threads:[~2015-06-04 13:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 13:04 [PATCH v2 00/23] ASoC: tas2552: Fixes, cleanups and improvements Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 01/23] ASoC: tas2552: Make the enable-gpio really optional Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 02/23] ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card Peter Ujfalusi
2015-06-04 16:25 ` Mark Brown
2015-06-05 6:57 ` Peter Ujfalusi
2015-06-04 16:50 ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 03/23] ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 04/23] ASoC: tas2552: Correct PDM configuration register bit definitions Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 05/23] ASoC: tas2552: Correct CFG1 " Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 06/23] ASoC: tas2552: Simplify the tas2552_mute function Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 07/23] ASoC: tas2552: Simplify and reverse the functionality of tas2552_sw_shutdown Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 08/23] ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the datasheet Peter Ujfalusi
2015-06-04 16:51 ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 09/23] DT/sound: bindings header file for tas2552 codec Peter Ujfalusi
2015-06-05 17:54 ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 10/23] ASoC: tas2552: Add support for pll and pdm source clock selection Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 11/23] ASoC: tas2552: Correct dai format support Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 12/23] ASoC: tas2552: Correct and clean up data format and BCLK/WCLK direction Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 13/23] ASoC: tas2552: Add TDM support Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 14/23] ASoC: tas2552: Clean up the Digital - Analog DAPM route definition Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 15/23] ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN) Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 16/23] ASoC: tas2552: Implement startup/stop sequence as per TRM Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 17/23] ASoC: tas2552: Add support for word length configuration Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 18/23] ASoC: tas2552: Configure the WCLK frequency based on the stream Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 19/23] ASoC: tas2552: Correct the PLL configuration Peter Ujfalusi
2015-06-05 6:53 ` Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 20/23] ASoC: tas2552: Add control for selecting DIN source Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 21/23] ASoC: tas2552: Correct Output Data register usage Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 22/23] ASoC: tas2552: Correct Boost Auto-Pass Through Control " Peter Ujfalusi
2015-06-04 13:04 ` Peter Ujfalusi [this message]
2015-06-05 17:53 ` [PATCH v2 00/23] ASoC: tas2552: Fixes, cleanups and improvements Mark Brown
2015-06-08 7:52 ` Peter Ujfalusi
2015-06-08 9:24 ` Mark Brown
2015-06-08 9:54 ` Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433423075-14142-24-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dmurphy@ti.com \
--cc=lgirdwood@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox