Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	dmurphy@ti.com
Cc: alsa-devel@alsa-project.org
Subject: [PATCH v2 11/23] ASoC: tas2552: Correct dai format support
Date: Thu, 4 Jun 2015 16:04:23 +0300	[thread overview]
Message-ID: <1433423075-14142-12-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1433423075-14142-1-git-send-email-peter.ujfalusi@ti.com>

DSP_A mode require one bit delay from the FS, DSP_B is without data delay.
When checking the requested format, also match the bit and fs inversion
flag along with the format since it is not possible to change inversion.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/tas2552.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c
index 34495241c674..2f4c2b52a9fa 100644
--- a/sound/soc/codecs/tas2552.c
+++ b/sound/soc/codecs/tas2552.c
@@ -188,11 +188,14 @@ static int tas2552_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+#define TAS2552_DAI_FMT_MASK	(TAS2552_BIT_CLK_MASK | \
+				 TAS2552_WORD_CLK_MASK | \
+				 TAS2552_DATA_FORMAT_MASK)
 static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_codec *codec = dai->codec;
+	u8 delay = 0;
 	u8 serial_format;
-	u8 serial_control_mask;
 
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBS_CFS:
@@ -212,19 +215,19 @@ static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
-	serial_control_mask = TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK;
-
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_I2S:
-		serial_format &= TAS2552_DAIFMT_I2S_MASK;
+	switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
+		       SND_SOC_DAIFMT_INV_MASK)) {
+	case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
 		break;
-	case SND_SOC_DAIFMT_DSP_A:
+	case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF):
+		delay = 1;
+	case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
 		serial_format |= TAS2552_DAIFMT_DSP;
 		break;
-	case SND_SOC_DAIFMT_RIGHT_J:
+	case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF):
 		serial_format |= TAS2552_DAIFMT_RIGHT_J;
 		break;
-	case SND_SOC_DAIFMT_LEFT_J:
+	case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
 		serial_format |= TAS2552_DAIFMT_LEFT_J;
 		break;
 	default:
@@ -232,11 +235,9 @@ static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
-	if (fmt & SND_SOC_DAIFMT_FORMAT_MASK)
-		serial_control_mask |= TAS2552_DATA_FORMAT_MASK;
-
-	snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, serial_control_mask,
-						serial_format);
+	snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, TAS2552_DAI_FMT_MASK,
+			    serial_format);
+	snd_soc_write(codec, TAS2552_SER_CTRL_2, delay);
 
 	return 0;
 }
-- 
2.4.2

  parent reply	other threads:[~2015-06-04 13:05 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-04 13:04 [PATCH v2 00/23] ASoC: tas2552: Fixes, cleanups and improvements Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 01/23] ASoC: tas2552: Make the enable-gpio really optional Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 02/23] ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card Peter Ujfalusi
2015-06-04 16:25   ` Mark Brown
2015-06-05  6:57     ` Peter Ujfalusi
2015-06-04 16:50   ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 03/23] ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 04/23] ASoC: tas2552: Correct PDM configuration register bit definitions Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 05/23] ASoC: tas2552: Correct CFG1 " Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 06/23] ASoC: tas2552: Simplify the tas2552_mute function Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 07/23] ASoC: tas2552: Simplify and reverse the functionality of tas2552_sw_shutdown Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 08/23] ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the datasheet Peter Ujfalusi
2015-06-04 16:51   ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 09/23] DT/sound: bindings header file for tas2552 codec Peter Ujfalusi
2015-06-05 17:54   ` Mark Brown
2015-06-04 13:04 ` [PATCH v2 10/23] ASoC: tas2552: Add support for pll and pdm source clock selection Peter Ujfalusi
2015-06-04 13:04 ` Peter Ujfalusi [this message]
2015-06-04 13:04 ` [PATCH v2 12/23] ASoC: tas2552: Correct and clean up data format and BCLK/WCLK direction Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 13/23] ASoC: tas2552: Add TDM support Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 14/23] ASoC: tas2552: Clean up the Digital - Analog DAPM route definition Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 15/23] ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN) Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 16/23] ASoC: tas2552: Implement startup/stop sequence as per TRM Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 17/23] ASoC: tas2552: Add support for word length configuration Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 18/23] ASoC: tas2552: Configure the WCLK frequency based on the stream Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 19/23] ASoC: tas2552: Correct the PLL configuration Peter Ujfalusi
2015-06-05  6:53   ` Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 20/23] ASoC: tas2552: Add control for selecting DIN source Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 21/23] ASoC: tas2552: Correct Output Data register usage Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 22/23] ASoC: tas2552: Correct Boost Auto-Pass Through Control " Peter Ujfalusi
2015-06-04 13:04 ` [PATCH v2 23/23] ASoC: tas2552: Code, define alignment changes for uniformity Peter Ujfalusi
2015-06-05 17:53 ` [PATCH v2 00/23] ASoC: tas2552: Fixes, cleanups and improvements Mark Brown
2015-06-08  7:52   ` Peter Ujfalusi
2015-06-08  9:24     ` Mark Brown
2015-06-08  9:54       ` Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433423075-14142-12-git-send-email-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=dmurphy@ti.com \
    --cc=lgirdwood@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox