From: Ben Dooks <ben-alsa@fluff.org>
To: alsa-devel@alsa-project.org
Cc: Ben Dooks <benb@simtec.co.uk>, broonie@opensource.wolfsonmicro.com
Subject: [patch 8/9] SMDK6410: Add support for WM8731 on an add-on board
Date: Wed, 04 Mar 2009 00:49:33 +0000 [thread overview]
Message-ID: <20090304005139.317005352@fluff.org.uk> (raw)
In-Reply-To: 20090304004925.530566010@fluff.org.uk
[-- Attachment #1: audio/smdk6410-wm8713-bjd.patch --]
[-- Type: text/plain, Size: 7720 bytes --]
Add support for an WM8731 connected to an SMDK6410 instead
of the onboard codec.
Signed-off-by: Ben Dooks <benb@simtec.co.uk>
Index: linux.git/sound/soc/s3c24xx/Makefile
===================================================================
--- linux.git.orig/sound/soc/s3c24xx/Makefile 2009-03-04 00:44:31.000000000 +0000
+++ linux.git/sound/soc/s3c24xx/Makefile 2009-03-04 00:45:54.000000000 +0000
@@ -19,9 +19,11 @@ snd-soc-neo1973-wm8753-objs := neo1973_w
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
+snd-soc-smdk6410-wm8731-objs := smdk6410-wm8731.o
obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_SND_S3C64XX_SOC_SMDK6410_WM8731) += snd-soc-smdk6410-wm8731.o
Index: linux.git/sound/soc/s3c24xx/smdk6410-wm8731.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux.git/sound/soc/s3c24xx/smdk6410-wm8731.c 2009-03-04 00:45:04.000000000 +0000
@@ -0,0 +1,227 @@
+
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8731.h"
+#include "s3c64xx-i2s.h"
+
+static struct platform_device *socdev;
+
+
+
+static void wm_shutdown(struct snd_pcm_substream *substream)
+{
+ printk(KERN_INFO "%s: substream %p\n", __func__, substream);
+}
+
+static int wm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int fmt;
+ int ret;
+
+ printk(KERN_INFO "%s: (%p,%p)\n", __func__, substream, params);
+ printk(KERN_INFO "%s: dai: cpu %p, codec %p\n", __func__, cpu_dai, codec_dai);
+
+ //fmt = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS;
+ fmt = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM;
+ fmt |= SND_SOC_DAIFMT_I2S;
+
+ ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+ if (ret < 0)
+ return ret;
+
+ if (fmt == (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM)) {
+ unsigned long iis_clkrate;
+
+ ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_MUX, 0,
+ SND_SOC_CLOCK_OUT);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: cpu set_sysclk err\n", __func__);
+ return ret;
+ }
+
+ /* set prescaler division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C64XX_DIV_PRESCALER, 1);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: codec clkdiv err\n", __func__);
+ return ret;
+ }
+
+ iis_clkrate = s3c64xx_i2s_get_clockrate(cpu_dai) / 2;
+ printk(KERN_INFO "%s: clockrate %ld\n", __func__, iis_clkrate);
+
+ iis_clkrate = 12000000; //tmphack//
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ iis_clkrate,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: codec sysclk err\n", __func__);
+ return ret;
+ }
+
+ } else {
+ /* TODO */
+ BUG();
+ }
+
+ return 0;
+}
+
+static int wm_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_MUX, 0,
+ SND_SOC_CLOCK_OUT);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: cpu set_sysclk err\n", __func__);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C64XX_DIV_PRESCALER, 1);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: cpu set_clkdiv err\n", __func__);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: codec sysclk err\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops wm_ops = {
+ .startup = wm_startup,
+ .hw_params = wm_hw_params,
+ .shutdown = wm_shutdown,
+};
+
+static const struct snd_soc_dapm_widget widgets[] = {
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_INPUT("Line In"),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+ /* headphone connected to LHPOUT1, RHPOUT1 */
+ {"Headphone Jack", NULL, "LHPOUT"},
+ {"Headphone Jack", NULL, "RHPOUT"},
+
+ {"Line Out", NULL, "LOUT" },
+ {"Line Out", NULL, "ROUT" },
+
+ {"LLINEIN", NULL, "Line In" },
+ {"RLINEIN", NULL, "Line In" },
+};
+
+static int wm_init(struct snd_soc_codec *codec)
+{
+ printk(KERN_DEBUG "%s: codec %p\n", __func__, codec);
+
+ snd_soc_dapm_new_controls(codec, widgets, ARRAY_SIZE(widgets));
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+#include "s3c24xx-pcm.h"
+
+static struct snd_soc_dai_link wm_dai_link = {
+ .name = "WM8731",
+ .stream_name = "WM8731",
+ .cpu_dai = &s3c64xx_i2s_dai,
+ .codec_dai = &wm8731_dai,
+ .init = wm_init,
+ .ops = &wm_ops,
+};
+
+static struct snd_soc_card wm_card = {
+ .name = "SMDK6410-WM8731",
+ .dai_link = &wm_dai_link,
+ .platform = &s3c24xx_soc_platform,
+ .num_links = 1,
+};
+
+struct wm8731_setup_data wm_setup = {
+ .i2c_bus = 0,
+ .i2c_address = 0x1a,
+};
+
+static struct snd_soc_device wm_snd_devdata = {
+ .card = &wm_card,
+ .codec_dev = &soc_codec_dev_wm8731,
+ .codec_data = &wm_setup,
+};
+
+static int __init smdk6410_wm8731_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s: welcome\n", __func__);
+
+ if (!machine_is_smdk6410()) {
+ printk(KERN_INFO "%s: for SMDK6410s\n", __func__);
+ return -ENOENT;
+ }
+
+ socdev = platform_device_alloc("soc-audio", 0);
+ if (!socdev) {
+ printk(KERN_ERR "%s: no device\n", __func__);
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(socdev, &wm_snd_devdata);
+
+ wm_snd_devdata.dev = &socdev->dev;
+
+ ret = platform_device_add(socdev);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to add\n", __func__);
+ goto err_dev;
+ }
+
+ printk(KERN_INFO "%s: succesfull\n", __func__);
+ return 0;
+
+err_dev:
+ platform_device_put(socdev);
+ return ret;
+}
+
+module_init(smdk6410_wm8731_init);
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
Index: linux.git/sound/soc/s3c24xx/Kconfig
===================================================================
--- linux.git.orig/sound/soc/s3c24xx/Kconfig 2009-03-04 00:44:31.000000000 +0000
+++ linux.git/sound/soc/s3c24xx/Kconfig 2009-03-04 00:45:04.000000000 +0000
@@ -66,3 +66,11 @@ config SND_S3C24XX_SOC_S3C24XX_UDA134X
depends on SND_S3C24XX_SOC
select SND_S3C24XX_SOC_I2S
select SND_SOC_UDA134X
+
+config SND_S3C64XX_SOC_SMDK6410_WM8731
+ tristate "SoC I2S Audio support for WM8731 added to an SMDK6410"
+ depends on SND_S3C24XX_SOC
+ select SND_S3C64XX_SOC_I2S
+ select SND_SOC_WM8731
+ help
+ Support for an WM8731 add-on board on I2S channel 0 on an SMDK6410
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2009-03-04 0:54 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-04 0:49 [patch 0/9] S3C24XX/S3C64XX updates Ben Dooks
2009-03-04 0:49 ` [patch 1/9] S3C24XX: Move and update IIS headers Ben Dooks
2009-03-04 0:49 ` [patch 2/9] JIVE: Add ASoC audio support Ben Dooks
2009-03-04 14:57 ` Mark Brown
2009-03-04 0:49 ` [patch 3/9] S3C: Move <mach/audio.h> to <plat/audio.h> Ben Dooks
2009-03-04 0:49 ` [patch 4/9] S3C24XX ASoC: Fix copyright statements on Simtec files Ben Dooks
2009-03-04 19:20 ` Mark Brown
2009-03-04 0:49 ` [patch 5/9] S3C: Split s3c2412-i2s.c into core and SoC specific parts Ben Dooks
2009-03-04 19:52 ` Mark Brown
2009-03-04 0:49 ` [patch 6/9] S3C64XX: Add s3c64xx-i2s support Ben Dooks
2009-03-04 0:56 ` Ben Dooks
2009-03-04 19:56 ` Mark Brown
2009-03-04 0:49 ` [patch 7/9] ASoC: Ensure codec check hw_write error at probe Ben Dooks
2009-03-04 19:57 ` Mark Brown
2009-03-04 0:49 ` Ben Dooks [this message]
2009-03-04 20:06 ` [patch 8/9] SMDK6410: Add support for WM8731 on an add-on board Mark Brown
2009-03-04 0:49 ` [patch 9/9] AUDIO: Select DMA if I2S is configured Ben Dooks
2009-03-04 20:29 ` [patch 0/9] S3C24XX/S3C64XX updates Mark Brown
2009-03-05 7:23 ` Takashi Iwai
2009-03-05 10:31 ` Mark Brown
2009-03-05 10:36 ` Takashi Iwai
2009-03-05 11:03 ` Mark Brown
2009-03-11 10:39 ` Ben Dooks
2009-03-11 12:47 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090304005139.317005352@fluff.org.uk \
--to=ben-alsa@fluff.org \
--cc=alsa-devel@alsa-project.org \
--cc=benb@simtec.co.uk \
--cc=broonie@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox