From: Andy Shevchenko <andriy.shevchenko@intel.com>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: alsa-devel@alsa-project.org, tiwai@suse.de,
Daniel Baluta <daniel.baluta@gmail.com>,
liam.r.girdwood@linux.intel.com, vkoul@kernel.org,
broonie@kernel.org, Alan Cox <alan@linux.intel.com>,
sound-open-firmware@alsa-project.org
Subject: Re: [PATCH v3 04/14] ASoC: SOF: Add support for IPC IO between DSP and Host
Date: Wed, 12 Dec 2018 00:57:33 +0200 [thread overview]
Message-ID: <20181211225733.GK10650@smile.fi.intel.com> (raw)
In-Reply-To: <20181211212318.28644-5-pierre-louis.bossart@linux.intel.com>
On Tue, Dec 11, 2018 at 03:23:08PM -0600, Pierre-Louis Bossart wrote:
> From: Liam Girdwood <liam.r.girdwood@linux.intel.com>
>
> Define an IPC ABI for all host <--> DSP communication. This ABI should
> be transport agnostic. i.e. it should work on MMIO and SPI/I2C style
> interfaces.
> + /* ssc1: TINTE */
> +#define SOF_DAI_INTEL_SSP_QUIRK_TINTE (1 << 0)
> + /* ssc1: PINTE */
> +#define SOF_DAI_INTEL_SSP_QUIRK_PINTE (1 << 1)
> + /* ssc2: SMTATF */
> +#define SOF_DAI_INTEL_SSP_QUIRK_SMTATF (1 << 2)
> + /* ssc2: MMRATF */
> +#define SOF_DAI_INTEL_SSP_QUIRK_MMRATF (1 << 3)
> + /* ssc2: PSPSTWFDFD */
> +#define SOF_DAI_INTEL_SSP_QUIRK_PSPSTWFDFD (1 << 4)
> + /* ssc2: PSPSRWFDFD */
> +#define SOF_DAI_INTEL_SSP_QUIRK_PSPSRWFDFD (1 << 5)
Style mismatch. Looks like a candidate for BIT()
> +#define SOF_DAI_FMT_FORMAT_MASK 0x000f
> +#define SOF_DAI_FMT_CLOCK_MASK 0x00f0
> +#define SOF_DAI_FMT_INV_MASK 0x0f00
> +#define SOF_DAI_FMT_MASTER_MASK 0xf000
GENMASK() ?
> +/* flags indicating which time stamps are in sync with each other */
> +#define SOF_TIME_HOST_SYNC (1 << 0)
> +#define SOF_TIME_DAI_SYNC (1 << 1)
> +#define SOF_TIME_WALL_SYNC (1 << 2)
> +#define SOF_TIME_STAMP_SYNC (1 << 3)
> +
> +/* flags indicating which time stamps are valid */
> +#define SOF_TIME_HOST_VALID (1 << 8)
> +#define SOF_TIME_DAI_VALID (1 << 9)
> +#define SOF_TIME_WALL_VALID (1 << 10)
> +#define SOF_TIME_STAMP_VALID (1 << 11)
> +
> +/* flags indicating time stamps are 64bit else 3use low 32bit */
> +#define SOF_TIME_HOST_64 (1 << 16)
> +#define SOF_TIME_DAI_64 (1 << 17)
> +#define SOF_TIME_WALL_64 (1 << 18)
> +#define SOF_TIME_STAMP_64 (1 << 19)
BIT() ?
> +#define SOF_IPC_PANIC_MAGIC_MASK 0x0ffff000
> +#define SOF_IPC_PANIC_CODE_MASK 0x00000fff
GENMASK() ?
> +#define IPC_TIMEOUT_MSECS 300
Simple _MS ?
> +/* find original TX message from DSP reply */
> +static struct snd_sof_ipc_msg *sof_ipc_reply_find_msg(struct snd_sof_ipc *ipc,
> + u32 header)
> +{
> + struct snd_sof_dev *sdev = ipc->sdev;
> + struct snd_sof_ipc_msg *msg;
> +
> + header = SOF_IPC_MESSAGE_ID(header);
> +
> + if (list_empty(&ipc->reply_list))
> + goto err;
Redundant. list_for_each_*() have this check already.
> +
> + list_for_each_entry(msg, &ipc->reply_list, list) {
> + if (SOF_IPC_MESSAGE_ID(msg->header) == header)
> + return msg;
> + }
> +
> +err:
> + dev_err(sdev->dev, "error: rx list empty but received 0x%x\n",
> + header);
> + return NULL;
> +}
> +int snd_sof_ipc_valid(struct snd_sof_dev *sdev)
> +{
> + struct sof_ipc_fw_ready *ready = &sdev->fw_ready;
> + struct sof_ipc_fw_version *v = &ready->version;
> +
> + dev_info(sdev->dev,
> + " Firmware info: version %d:%d:%d-%s\n", v->major, v->minor,
Indentation issues.
> + v->micro, v->tag);
> + dev_info(sdev->dev,
> + " Firmware: ABI %d:%d:%d Kernel ABI %d:%d:%d\n",
> + SOF_ABI_VERSION_MAJOR(v->abi_version),
> + SOF_ABI_VERSION_MINOR(v->abi_version),
> + SOF_ABI_VERSION_PATCH(v->abi_version),
> + SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH);
> +
> + if (SOF_ABI_VERSION_INCOMPATIBLE(SOF_ABI_VERSION, v->abi_version)) {
> + dev_err(sdev->dev, "error: incompatible FW ABI version\n");
> + return -EINVAL;
> + }
> +
> + if (ready->debug.bits.build) {
> + dev_info(sdev->dev,
> + " Firmware debug build %d on %s-%s - options:\n"
> + " GDB: %s\n"
> + " lock debug: %s\n"
> + " lock vdebug: %s\n",
> + v->build, v->date, v->time,
> + ready->debug.bits.gdb ? "enabled" : "disabled",
> + ready->debug.bits.locks ? "enabled" : "disabled",
> + ready->debug.bits.locks_verbose ?
> + "enabled" : "disabled");
I would leave it on one line (only 3 characters more, but better readability).
ready->debug.bits.locks_verbose ? "enabled" : "disabled");
> + }
> +
> + /* copy the fw_version into debugfs at first boot */
> + memcpy(&sdev->fw_version, v, sizeof(*v));
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(snd_sof_ipc_valid);
> + dev_dbg(sdev->dev, "pre-allocate %d IPC messages\n",
> + IPC_EMPTY_LIST_SIZE);
Noise.
> +
> + /* pre-allocate message data */
> + for (i = 0; i < IPC_EMPTY_LIST_SIZE; i++) {
> + msg->msg_data = devm_kzalloc(sdev->dev, PAGE_SIZE, GFP_KERNEL);
> + if (!msg->msg_data)
> + return NULL;
> +
> + msg->reply_data = devm_kzalloc(sdev->dev, PAGE_SIZE,
> + GFP_KERNEL);
> + if (!msg->reply_data)
> + return NULL;
Can't you just get enough (non-continuous?) pages at once via get_free_pages interface?
I didn't know that one, so, consider rather a way to look into.
> +
> + init_waitqueue_head(&msg->waitq);
> + list_add(&msg->list, &ipc->empty_list);
> + msg++;
> + }
> +
> + return ipc;
> +}
> +EXPORT_SYMBOL(snd_sof_ipc_init);
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2018-12-11 22:57 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-11 21:23 [PATCH v3 00/14] Sound Open Firmware (SOF) core Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 01/14] ASoC: SOF: Add Sound Open Firmware driver core Pierre-Louis Bossart
2018-12-11 22:20 ` Andy Shevchenko
2018-12-11 23:20 ` Pierre-Louis Bossart
2018-12-12 7:51 ` Takashi Iwai
2018-12-12 14:53 ` Pierre-Louis Bossart
2018-12-12 20:42 ` Daniel Baluta
2018-12-12 22:35 ` Pierre-Louis Bossart
2019-01-29 16:49 ` Daniel Baluta
2019-01-30 16:12 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 02/14] ASoC: SOF: Add Sound Open Firmware KControl support Pierre-Louis Bossart
2018-12-11 22:23 ` Andy Shevchenko
2018-12-11 22:48 ` Pierre-Louis Bossart
2018-12-11 23:25 ` Andy Shevchenko
2018-12-12 20:18 ` Pierre-Louis Bossart
2018-12-12 7:35 ` Takashi Iwai
2018-12-12 15:01 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 03/14] ASoC: SOF: Add driver debug support Pierre-Louis Bossart
2018-12-11 22:32 ` Andy Shevchenko
2018-12-11 23:29 ` Pierre-Louis Bossart
2019-01-09 19:40 ` Mark Brown
2019-01-10 20:47 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 04/14] ASoC: SOF: Add support for IPC IO between DSP and Host Pierre-Louis Bossart
2018-12-11 22:57 ` Andy Shevchenko [this message]
2018-12-11 23:38 ` Pierre-Louis Bossart
2018-12-12 8:17 ` Takashi Iwai
2018-12-12 15:19 ` Pierre-Louis Bossart
2018-12-12 15:34 ` Takashi Iwai
2018-12-13 5:24 ` Keyon Jie
2018-12-13 7:48 ` Takashi Iwai
2018-12-13 9:13 ` Keyon Jie
2018-12-13 8:06 ` Keyon Jie
2018-12-13 8:59 ` rander.wang
2019-01-09 20:37 ` Mark Brown
2019-01-10 20:11 ` Pierre-Louis Bossart
2019-01-22 19:04 ` Mark Brown
2019-01-22 21:05 ` Pierre-Louis Bossart
2019-01-22 21:13 ` Mark Brown
2019-01-23 5:51 ` [Sound-open-firmware] " Keyon Jie
2019-01-14 15:10 ` Daniel Baluta
2019-01-14 17:39 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 05/14] ASoC: SOF: Add PCM operations support Pierre-Louis Bossart
2018-12-12 8:04 ` Takashi Iwai
2018-12-12 13:12 ` Andy Shevchenko
2018-12-12 15:29 ` [Sound-open-firmware] " Pierre-Louis Bossart
2018-12-12 15:43 ` Takashi Iwai
2018-12-12 16:10 ` Pierre-Louis Bossart
2018-12-12 22:09 ` Daniel Baluta
2018-12-11 21:23 ` [PATCH v3 06/14] ASoC: SOF: Add support for loading topologies Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 07/14] ASoC: SOF: Add DSP firmware logger support Pierre-Louis Bossart
2018-12-11 23:21 ` Andy Shevchenko
2018-12-11 23:43 ` Pierre-Louis Bossart
2018-12-12 6:44 ` Takashi Iwai
2018-12-12 11:11 ` Takashi Iwai
2018-12-12 16:04 ` [Sound-open-firmware] " Pierre-Louis Bossart
2018-12-12 16:12 ` Takashi Iwai
2018-12-12 17:01 ` Pierre-Louis Bossart
2019-01-09 20:44 ` Mark Brown
2019-01-09 21:39 ` Pierre-Louis Bossart
2019-01-22 18:57 ` Mark Brown
2019-01-22 20:33 ` Pierre-Louis Bossart
2019-01-22 20:41 ` Mark Brown
2019-01-22 20:52 ` Pierre-Louis Bossart
2019-01-22 21:08 ` Mark Brown
2019-01-22 21:13 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 08/14] ASoC: SOF: Add DSP HW abstraction operations Pierre-Louis Bossart
2018-12-11 23:16 ` Andy Shevchenko
2018-12-11 23:45 ` Pierre-Louis Bossart
2019-01-09 20:51 ` Mark Brown
2019-01-09 21:37 ` Pierre-Louis Bossart
2019-01-22 18:56 ` Mark Brown
2018-12-11 21:23 ` [PATCH v3 09/14] ASoC: SOF: Add firmware loader support Pierre-Louis Bossart
2018-12-11 22:38 ` Andy Shevchenko
2018-12-11 23:54 ` Pierre-Louis Bossart
2019-01-09 20:55 ` Mark Brown
2018-12-12 11:23 ` Takashi Iwai
2018-12-12 16:06 ` [Sound-open-firmware] " Pierre-Louis Bossart
2019-01-09 21:02 ` Mark Brown
2019-01-09 21:24 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 10/14] ASoC: SOF: Add userspace ABI support Pierre-Louis Bossart
2018-12-21 11:10 ` Daniel Baluta
2018-12-21 14:59 ` [Sound-open-firmware] " Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 11/14] ASoC: SOF: Add PM support Pierre-Louis Bossart
2018-12-12 11:32 ` Takashi Iwai
2018-12-12 16:08 ` Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 12/14] ASoC: SOF: Add Nocodec machine driver support Pierre-Louis Bossart
2018-12-11 21:23 ` [PATCH v3 13/14] ASoC: SOF: Add xtensa support Pierre-Louis Bossart
2018-12-11 23:08 ` Andy Shevchenko
2018-12-12 0:00 ` Pierre-Louis Bossart
[not found] ` <93aff9af-c693-c951-4821-e9e334133ed0@linux.intel.com>
2018-12-13 9:58 ` [Sound-open-firmware] " rander.wang
2018-12-17 13:45 ` Takashi Iwai
2018-12-17 14:24 ` Mark Brown
2018-12-11 21:23 ` [PATCH v3 14/14] ASoC: SOF: Add utils Pierre-Louis Bossart
2018-12-11 23:06 ` Andy Shevchenko
2018-12-12 0:06 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181211225733.GK10650@smile.fi.intel.com \
--to=andriy.shevchenko@intel.com \
--cc=alan@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=daniel.baluta@gmail.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=sound-open-firmware@alsa-project.org \
--cc=tiwai@suse.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox