From: Ben Dooks <ben.dooks@codethink.co.uk>
To: linux-tegra@vger.kernel.org, alsa-devel@alsa-project.org,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-kernel@lists.codethink.co.uk,
Edward Cragg <edward.cragg@codethink.co.uk>
Subject: [alsa-devel] [PATCH 2/8] ASoC: tegra: Allow 24bit and 32bit samples
Date: Tue, 17 Sep 2019 19:12:27 +0100 [thread overview]
Message-ID: <20190917181233.534-3-ben.dooks@codethink.co.uk> (raw)
In-Reply-To: <20190917181233.534-1-ben.dooks@codethink.co.uk>
From: Edward Cragg <edward.cragg@codethink.co.uk>
The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or
S32_LE formats when requested.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: remove debug prints]
---
squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
---
sound/soc/tegra/tegra30_i2s.c | 32 +++++++++++++++++++++++---------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index d36b4662b420..b5372839f672 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
struct device *dev = dai->dev;
struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
unsigned int mask, val, reg;
- int ret, sample_size, srate, i2sclock, bitcnt;
+ int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
struct tegra30_ahub_cif_conf cif_conf;
if (params_channels(params) != 2)
@@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
+ audio_bits = TEGRA30_AUDIOCIF_BITS_16;
sample_size = 16;
break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
+ audio_bits = TEGRA30_AUDIOCIF_BITS_24;
+ sample_size = 24;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
+ audio_bits = TEGRA30_AUDIOCIF_BITS_32;
+ sample_size = 32;
+ break;
default:
return -EINVAL;
}
@@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
cif_conf.threshold = 0;
cif_conf.audio_channels = 2;
cif_conf.client_channels = 2;
- cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
- cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
+ cif_conf.audio_bits = audio_bits;
+ cif_conf.client_bits = audio_bits;
cif_conf.expand = 0;
cif_conf.stereo_conv = 0;
cif_conf.replicate = 0;
@@ -264,10 +275,6 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai *dai,
struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
unsigned int mask = 0, val = 0;
- dev_info(dai->dev, "%s: setting TDM: tx_mask: 0x%08x rx_mask: 0x%08x "
- "slots: 0x%08x " "width: %d\n",
- __func__, tx_mask, rx_mask, slots, slot_width);
-
/* Set up slots and tx/rx masks */
mask = TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK |
TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_MASK |
@@ -277,6 +284,8 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai *dai,
(rx_mask << TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_SHIFT) |
((slots - 1) << TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT);
+ pm_runtime_get_sync(dai->dev);
+
regmap_update_bits(i2s->regmap, TEGRA30_I2S_SLOT_CTRL, mask, val);
/* Set FSYNC width */
@@ -284,6 +293,7 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai *dai,
TEGRA30_I2S_CH_CTRL_FSYNC_WIDTH_MASK,
(slot_width - 1) << TEGRA30_I2S_CH_CTRL_FSYNC_WIDTH_SHIFT);
+ pm_runtime_put(dai->dev);
return 0;
}
@@ -311,14 +321,18 @@ static const struct snd_soc_dai_driver tegra30_i2s_dai_template = {
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S24_LE |
+ SNDRV_PCM_FMTBIT_S16_LE,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_96000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S24_LE |
+ SNDRV_PCM_FMTBIT_S16_LE,
},
.ops = &tegra30_i2s_dai_ops,
.symmetric_rates = 1,
--
2.23.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2019-09-17 18:18 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 18:12 [alsa-devel] RFC: TDM mode support on the tegra30 Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 1/8] ASoC: tegra: Add a TDM configuration callback Ben Dooks
2019-09-17 18:22 ` Pierre-Louis Bossart
2019-09-18 8:42 ` Jon Hunter
2019-09-18 10:11 ` Ben Dooks
2019-09-18 10:25 ` Jon Hunter
2019-09-18 10:48 ` Mark Brown
2019-09-18 11:44 ` Ben Dooks
2019-09-18 13:33 ` Pierre-Louis Bossart
2019-09-18 15:02 ` Mark Brown
2019-09-17 18:12 ` Ben Dooks [this message]
2019-09-17 18:26 ` [alsa-devel] [PATCH 2/8] ASoC: tegra: Allow 24bit and 32bit samples Pierre-Louis Bossart
2019-09-18 7:44 ` Ben Dooks
2019-09-18 10:08 ` Mark Brown
2019-09-18 11:50 ` Ben Dooks
2019-09-18 12:05 ` Mark Brown
2019-09-17 18:12 ` [alsa-devel] [PATCH 3/8] ASoC: tegra: i2s: Add support for more than 2 channels Ben Dooks
2019-09-18 8:50 ` Jon Hunter
2019-09-18 10:12 ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 4/8] ASoC: tegra: disable rx_fifo after disable stream Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 5/8] ASoC: tegra: set edge mode for TDM correctly Ben Dooks
2019-09-17 19:33 ` kbuild test robot
2019-09-18 8:54 ` Jon Hunter
2019-09-18 9:02 ` Jon Hunter
2019-09-18 10:15 ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 6/8] ASoC: tegra: set i2s_offset to 0 for tdm Ben Dooks
2019-09-18 9:02 ` Jon Hunter
2019-09-18 11:30 ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 7/8] ASoC: tegra: config fifos on hw_param changes Ben Dooks
2019-09-18 9:14 ` Jon Hunter
2019-09-18 11:41 ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 8/8] ASoC: tegra: take packing settings from the audio cif_config Ben Dooks
2019-09-18 9:16 ` Jon Hunter
2019-09-18 10:02 ` Sameer Pujar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917181233.534-3-ben.dooks@codethink.co.uk \
--to=ben.dooks@codethink.co.uk \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=edward.cragg@codethink.co.uk \
--cc=jonathanh@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@lists.codethink.co.uk \
--cc=linux-tegra@vger.kernel.org \
--cc=perex@perex.cz \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox