Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben.dooks@codethink.co.uk>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>,
	linux-kernel@lists.codethink.co.uk, alsa-devel@alsa-project.org,
	Liam Girdwood <lgirdwood@gmail.com>,
	Takashi Iwai <tiwai@suse.com>, Mark Brown <broonie@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Edward Cragg <edward.cragg@codethink.co.uk>,
	linux-tegra@vger.kernel.org, linux-tegra-owner@vger.kernel.org
Subject: Re: [alsa-devel] [PATCH 2/8] ASoC: tegra: Allow 24bit and 32bit samples
Date: Wed, 18 Sep 2019 08:44:50 +0100	[thread overview]
Message-ID: <de15ea8e9d2c07a1253fd414b421efbe@codethink.co.uk> (raw)
In-Reply-To: <077870b1-8856-9a28-dd13-f8bfb1418adb@linux.intel.com>



On 2019-09-17 19:26, Pierre-Louis Bossart wrote:
> On 9/17/19 1:12 PM, Ben Dooks wrote:
>> From: Edward Cragg <edward.cragg@codethink.co.uk>
>> 
>> The tegra3 audio can support 24 and 32 bit sample sizes so add the
>>   option to the tegra30_i2s_hw_params to configure the S24_LE or
>>   S32_LE formats when requested.
>> 
>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>> [ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
>> [ben.dooks@codethink.co.uk: add pm calls around ytdm config]
>> [ben.dooks@codethink.co.uk: remove debug prints]
> 

> You need to add your own Signed-off-by when sending patches from other 
> people
Yes, will do when this series has been reviewed and modifications done.

> 
>> ---
>> squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is needed 
>> in tdm code
>> 
>> ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
>> ---
>>   sound/soc/tegra/tegra30_i2s.c | 32 +++++++++++++++++++++++---------
>>   1 file changed, 23 insertions(+), 9 deletions(-)
>> 
>> diff --git a/sound/soc/tegra/tegra30_i2s.c 
>> b/sound/soc/tegra/tegra30_i2s.c
>> index d36b4662b420..b5372839f672 100644
>> --- a/sound/soc/tegra/tegra30_i2s.c
>> +++ b/sound/soc/tegra/tegra30_i2s.c
>> @@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct 
>> snd_pcm_substream *substream,
>>   	struct device *dev = dai->dev;
>>   	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>   	unsigned int mask, val, reg;
>> -	int ret, sample_size, srate, i2sclock, bitcnt;
>> +	int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
>>   	struct tegra30_ahub_cif_conf cif_conf;
>>     	if (params_channels(params) != 2)
>> @@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct 
>> snd_pcm_substream *substream,
>>   	switch (params_format(params)) {
>>   	case SNDRV_PCM_FORMAT_S16_LE:
>>   		val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
>> +		audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>>   		sample_size = 16;
>>   		break;
>> +	case SNDRV_PCM_FORMAT_S24_LE:
>> +		val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
>> +		audio_bits = TEGRA30_AUDIOCIF_BITS_24;
>> +		sample_size = 24;
>> +		break;
>> +	case SNDRV_PCM_FORMAT_S32_LE:
>> +		val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
>> +		audio_bits = TEGRA30_AUDIOCIF_BITS_32;
>> +		sample_size = 32;
>> +		break;
>>   	default:
>>   		return -EINVAL;
>>   	}
>> @@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct 
>> snd_pcm_substream *substream,
>>   	cif_conf.threshold = 0;
>>   	cif_conf.audio_channels = 2;
>>   	cif_conf.client_channels = 2;
>> -	cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>> -	cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
>> +	cif_conf.audio_bits = audio_bits;
>> +	cif_conf.client_bits = audio_bits;
>>   	cif_conf.expand = 0;
>>   	cif_conf.stereo_conv = 0;
>>   	cif_conf.replicate = 0;
>> @@ -264,10 +275,6 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai 
>> *dai,
>>   	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>   	unsigned int mask = 0, val = 0;
>>   -	dev_info(dai->dev, "%s: setting TDM: tx_mask: 0x%08x rx_mask: 
>> 0x%08x "
>> -		 "slots: 0x%08x " "width: %d\n",
>> -		 __func__, tx_mask, rx_mask, slots, slot_width);
>> -
> 
> This should be squashed in the previous patch

Thanks, looks like I missed a bad rebase and hit this patch instead of 
the
previous.

> 
>>   	/* Set up slots and tx/rx masks */
>>   	mask = TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK |
>>   	       TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_MASK |
>> @@ -277,6 +284,8 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai 
>> *dai,
>>   	      (rx_mask << TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_SHIFT) |
>>   	      ((slots - 1) << TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT);
>>   +	pm_runtime_get_sync(dai->dev);
>> +
>>   	regmap_update_bits(i2s->regmap, TEGRA30_I2S_SLOT_CTRL, mask, val);
>>     	/* Set FSYNC width */
>> @@ -284,6 +293,7 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai 
>> *dai,
>>   		TEGRA30_I2S_CH_CTRL_FSYNC_WIDTH_MASK,
>>   		(slot_width - 1) << TEGRA30_I2S_CH_CTRL_FSYNC_WIDTH_SHIFT);
>>   +	pm_runtime_put(dai->dev);
> 
> same for PM stuff, it's not related to 24/32 bit samples

Yes, will do.
Thank you for reviewing.

>>   	return 0;
>>   }
>>   @@ -311,14 +321,18 @@ static const struct snd_soc_dai_driver 
>> tegra30_i2s_dai_template = {
>>   		.channels_min = 2,
>>   		.channels_max = 2,
>>   		.rates = SNDRV_PCM_RATE_8000_96000,
>> -		.formats = SNDRV_PCM_FMTBIT_S16_LE,
>> +		.formats = SNDRV_PCM_FMTBIT_S32_LE |
>> +			   SNDRV_PCM_FMTBIT_S24_LE |
>> +			   SNDRV_PCM_FMTBIT_S16_LE,
>>   	},
>>   	.capture = {
>>   		.stream_name = "Capture",
>>   		.channels_min = 2,
>>   		.channels_max = 2,
>>   		.rates = SNDRV_PCM_RATE_8000_96000,
>> -		.formats = SNDRV_PCM_FMTBIT_S16_LE,
>> +		.formats = SNDRV_PCM_FMTBIT_S32_LE |
>> +			   SNDRV_PCM_FMTBIT_S24_LE |
>> +			   SNDRV_PCM_FMTBIT_S16_LE,
>>   	},
>>   	.ops = &tegra30_i2s_dai_ops,
>>   	.symmetric_rates = 1,
>> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2019-09-18  7:45 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-17 18:12 [alsa-devel] RFC: TDM mode support on the tegra30 Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 1/8] ASoC: tegra: Add a TDM configuration callback Ben Dooks
2019-09-17 18:22   ` Pierre-Louis Bossart
2019-09-18  8:42   ` Jon Hunter
2019-09-18 10:11     ` Ben Dooks
2019-09-18 10:25       ` Jon Hunter
2019-09-18 10:48         ` Mark Brown
2019-09-18 11:44           ` Ben Dooks
2019-09-18 13:33           ` Pierre-Louis Bossart
2019-09-18 15:02             ` Mark Brown
2019-09-17 18:12 ` [alsa-devel] [PATCH 2/8] ASoC: tegra: Allow 24bit and 32bit samples Ben Dooks
2019-09-17 18:26   ` Pierre-Louis Bossart
2019-09-18  7:44     ` Ben Dooks [this message]
2019-09-18 10:08       ` Mark Brown
2019-09-18 11:50         ` Ben Dooks
2019-09-18 12:05           ` Mark Brown
2019-09-17 18:12 ` [alsa-devel] [PATCH 3/8] ASoC: tegra: i2s: Add support for more than 2 channels Ben Dooks
2019-09-18  8:50   ` Jon Hunter
2019-09-18 10:12     ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 4/8] ASoC: tegra: disable rx_fifo after disable stream Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 5/8] ASoC: tegra: set edge mode for TDM correctly Ben Dooks
2019-09-17 19:33   ` kbuild test robot
2019-09-18  8:54   ` Jon Hunter
2019-09-18  9:02     ` Jon Hunter
2019-09-18 10:15       ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 6/8] ASoC: tegra: set i2s_offset to 0 for tdm Ben Dooks
2019-09-18  9:02   ` Jon Hunter
2019-09-18 11:30     ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 7/8] ASoC: tegra: config fifos on hw_param changes Ben Dooks
2019-09-18  9:14   ` Jon Hunter
2019-09-18 11:41     ` Ben Dooks
2019-09-17 18:12 ` [alsa-devel] [PATCH 8/8] ASoC: tegra: take packing settings from the audio cif_config Ben Dooks
2019-09-18  9:16   ` Jon Hunter
2019-09-18 10:02     ` Sameer Pujar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=de15ea8e9d2c07a1253fd414b421efbe@codethink.co.uk \
    --to=ben.dooks@codethink.co.uk \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=edward.cragg@codethink.co.uk \
    --cc=jonathanh@nvidia.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@lists.codethink.co.uk \
    --cc=linux-tegra-owner@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox