* [PATCH 01/14] drm/amd/display: Secondary display goes blank on Non DCN31
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 02/14] drm/amd/display: Only flush delta from last command execution Wayne Lin
` (13 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, Ahmad Othman, solomon.chiu,
Aurabindo.Pillai, wayne.lin, Wenjing Liu, mikita.lipski,
Bhawanpreet.Lakha, agustin.gutierrez, pavle.kotarac
From: Ahmad Othman <Ahmad.Othman@amd.com>
[Why]
Due to integration issues with branch merging,
a regression happened that prevented secondary
displays from lighting up or enabling certain features
[How]
Separated the new logic to be for DCN31 only and retained
pre DCN31 logic for all other ASICs
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ahmad Othman <Ahmad.Othman@amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 2e2dcd5518da..8a8a5aead34d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -3997,7 +3997,8 @@ static void update_psp_stream_config(struct pipe_ctx *pipe_ctx, bool dpms_off)
config.phy_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;
// Add flag to guard new A0 DIG mapping
- if (pipe_ctx->stream->ctx->dc->enable_c20_dtm_b0 == true) {
+ if (pipe_ctx->stream->ctx->dc->enable_c20_dtm_b0 == true &&
+ pipe_ctx->stream->link->dc->ctx->dce_version == DCN_VERSION_3_1) {
config.dig_be = link_enc->preferred_engine;
config.dio_output_type = pipe_ctx->stream->link->ep_type;
config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 02/14] drm/amd/display: Only flush delta from last command execution
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
2021-11-12 0:54 ` [PATCH 01/14] drm/amd/display: Secondary display goes blank on Non DCN31 Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 03/14] drm/amd/display: Revert changes for MPO underflow Wayne Lin
` (12 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Eric Yang, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, solomon.chiu, Aurabindo.Pillai,
wayne.lin, mikita.lipski, Bhawanpreet.Lakha, Nicholas Kazlauskas,
agustin.gutierrez, pavle.kotarac
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
[Why]
We're currently flushing commands that had been previously been
flushed or are currently being processed by the DMCUB when we don't
immediately wait for idle after command execution.
[How]
Avoiding reflushing the data by keeping track of the last wptr.
We'll treat this as the actual rptr by creating a copy of the inbox
and modifying the copy's rptr.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
---
drivers/gpu/drm/amd/display/dmub/dmub_srv.h | 1 +
drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 9 ++++++++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
index 90065a09e76a..83855b8a32e9 100644
--- a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
+++ b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
@@ -411,6 +411,7 @@ struct dmub_srv {
struct dmub_srv_base_funcs funcs;
struct dmub_srv_hw_funcs hw_funcs;
struct dmub_rb inbox1_rb;
+ uint32_t inbox1_last_wptr;
/**
* outbox1_rb is accessed without locks (dal & dc)
* and to be used only in dmub_srv_stat_get_notification()
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
index 56a03328e8e6..6cc897dacd92 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c
@@ -609,6 +609,8 @@ enum dmub_status dmub_srv_cmd_queue(struct dmub_srv *dmub,
enum dmub_status dmub_srv_cmd_execute(struct dmub_srv *dmub)
{
+ struct dmub_rb flush_rb;
+
if (!dmub->hw_init)
return DMUB_STATUS_INVALID;
@@ -617,9 +619,14 @@ enum dmub_status dmub_srv_cmd_execute(struct dmub_srv *dmub)
* been flushed to framebuffer memory. Otherwise DMCUB might
* read back stale, fully invalid or partially invalid data.
*/
- dmub_rb_flush_pending(&dmub->inbox1_rb);
+ flush_rb = dmub->inbox1_rb;
+ flush_rb.rptr = dmub->inbox1_last_wptr;
+ dmub_rb_flush_pending(&flush_rb);
dmub->hw_funcs.set_inbox1_wptr(dmub, dmub->inbox1_rb.wrpt);
+
+ dmub->inbox1_last_wptr = dmub->inbox1_rb.wrpt;
+
return DMUB_STATUS_OK;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 03/14] drm/amd/display: Revert changes for MPO underflow
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
2021-11-12 0:54 ` [PATCH 01/14] drm/amd/display: Secondary display goes blank on Non DCN31 Wayne Lin
2021-11-12 0:54 ` [PATCH 02/14] drm/amd/display: Only flush delta from last command execution Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 04/14] drm/amd/display: set MSA vsp/hsp to 0 for positive polarity for DP 128b/132b Wayne Lin
` (11 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Martin Leung, Rodrigo.Siqueira, roman.li, solomon.chiu,
Aurabindo.Pillai, Angus Wang, wayne.lin, mikita.lipski,
Bhawanpreet.Lakha, agustin.gutierrez, pavle.kotarac
From: Angus Wang <angus.wang@amd.com>
[WHY]
The previous changes for fixing MPO underflow with multiple
display connected caused a regression where the machine runs
into a hang when doing multiple driver pnp with multiple displays
connected
[HOW]
Reverted offending change
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +-
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 2 +-
drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c | 2 +-
drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 83f5d9aaffcb..3883f918b3bb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1069,7 +1069,7 @@ static const struct dc_debug_options debug_defaults_drv = {
.timing_trace = false,
.clock_trace = true,
.disable_pplib_clock_request = true,
- .pipe_split_policy = MPC_SPLIT_DYNAMIC,
+ .pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
.force_single_disp_pipe_split = false,
.disable_dcc = DCC_ENABLE,
.vsr_support = true,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
index 98852b586295..79a66e0c4303 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c
@@ -840,7 +840,7 @@ static const struct dc_debug_options debug_defaults_drv = {
.timing_trace = false,
.clock_trace = true,
.disable_pplib_clock_request = true,
- .pipe_split_policy = MPC_SPLIT_DYNAMIC,
+ .pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
.force_single_disp_pipe_split = false,
.disable_dcc = DCC_ENABLE,
.vsr_support = true,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c
index 16e7059393fa..fcf96cf08c76 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c
@@ -211,7 +211,7 @@ static const struct dc_debug_options debug_defaults_drv = {
.timing_trace = false,
.clock_trace = true,
.disable_pplib_clock_request = true,
- .pipe_split_policy = MPC_SPLIT_DYNAMIC,
+ .pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
.force_single_disp_pipe_split = false,
.disable_dcc = DCC_ENABLE,
.vsr_support = true,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
index 87cec14b7870..4a9b64023675 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
@@ -193,7 +193,7 @@ static const struct dc_debug_options debug_defaults_drv = {
.timing_trace = false,
.clock_trace = true,
.disable_pplib_clock_request = true,
- .pipe_split_policy = MPC_SPLIT_DYNAMIC,
+ .pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
.force_single_disp_pipe_split = false,
.disable_dcc = DCC_ENABLE,
.vsr_support = true,
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 04/14] drm/amd/display: set MSA vsp/hsp to 0 for positive polarity for DP 128b/132b
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (2 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 03/14] drm/amd/display: Revert changes for MPO underflow Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 05/14] drm/amd/display: Code change for DML isolation Wayne Lin
` (10 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, Wenjing Liu, solomon.chiu,
Aurabindo.Pillai, Ariel Bernstein, wayne.lin, mikita.lipski,
Bhawanpreet.Lakha, agustin.gutierrez, pavle.kotarac
From: Wenjing Liu <wenjing.liu@amd.com>
[why]
There is a bug in MSA programming sequence that mistakenly set
MSA vsp/hsp to 1 for positive polarity. This is incorrect.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
---
.../drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
index 565f12dd179a..5065904c7833 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c
@@ -358,8 +358,8 @@ static void dcn31_hpo_dp_stream_enc_set_stream_attribute(
h_width = hw_crtc_timing.h_border_left + hw_crtc_timing.h_addressable + hw_crtc_timing.h_border_right;
v_height = hw_crtc_timing.v_border_top + hw_crtc_timing.v_addressable + hw_crtc_timing.v_border_bottom;
- hsp = hw_crtc_timing.flags.HSYNC_POSITIVE_POLARITY ? 0x80 : 0;
- vsp = hw_crtc_timing.flags.VSYNC_POSITIVE_POLARITY ? 0x80 : 0;
+ hsp = hw_crtc_timing.flags.HSYNC_POSITIVE_POLARITY ? 0 : 0x80;
+ vsp = hw_crtc_timing.flags.VSYNC_POSITIVE_POLARITY ? 0 : 0x80;
v_freq = hw_crtc_timing.pix_clk_100hz * 100;
/* MSA Packet Mapping to 32-bit Link Symbols - DP2 spec, section 2.7.4.1
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 05/14] drm/amd/display: Code change for DML isolation
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (3 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 04/14] drm/amd/display: set MSA vsp/hsp to 0 for positive polarity for DP 128b/132b Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 06/14] drm/amd/display: Reset fifo after enable otg Wayne Lin
` (9 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Jun Lei, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, solomon.chiu, Aurabindo.Pillai,
wayne.lin, mikita.lipski, Bhawanpreet.Lakha, agustin.gutierrez,
pavle.kotarac
From: Jun Lei <jun.lei@amd.com>
[why]
DML itself is SW only, putting the logic as part of resource makes it
hw dependent and thus impossible to compile separately from dc.
Separate compilation is critical for unit testing as well as bbox tool
development
[how]
create new dml wrapper.
Copy logic from the validation functions into dml wrapper as base
implementation. Dml wrapper has internal/static implementations
for all helpers, and does not reference other functions.
It may reference dc structures/types for convenience.
This change now has all the changes for DML isolation squashed into
one.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
---
.../drm/amd/display/dc/dml/display_mode_lib.h | 1 +
.../gpu/drm/amd/display/dc/dml/dml_wrapper.c | 1889 +++++++++++++++++
.../display/dc/dml/dml_wrapper_translation.c | 284 +++
.../gpu/drm/amd/display/dc/inc/dml_wrapper.h | 34 +
4 files changed, 2208 insertions(+)
create mode 100644 drivers/gpu/drm/amd/display/dc/dml/dml_wrapper.c
create mode 100644 drivers/gpu/drm/amd/display/dc/dml/dml_wrapper_translation.c
create mode 100644 drivers/gpu/drm/amd/display/dc/inc/dml_wrapper.h
diff --git a/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h b/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h
index 6905ef1e75a6..d76251fd1566 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.h
@@ -73,6 +73,7 @@ struct display_mode_lib {
struct vba_vars_st vba;
struct dal_logger *logger;
struct dml_funcs funcs;
+ struct _vcs_dpi_display_e2e_pipe_params_st dml_pipe_state[6];
};
void dml_init_instance(struct display_mode_lib *lib,
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dml_wrapper.c b/drivers/gpu/drm/amd/display/dc/dml/dml_wrapper.c
new file mode 100644
index 000000000000..ece34b0b8a46
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dml/dml_wrapper.c
@@ -0,0 +1,1889 @@
+/*
+ * Copyright 2017 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "dml_wrapper.h"
+#include "resource.h"
+#include "core_types.h"
+#include "dsc.h"
+#include "clk_mgr.h"
+
+#ifndef DC_LOGGER_INIT
+#define DC_LOGGER_INIT
+#undef DC_LOG_WARNING
+#define DC_LOG_WARNING
+#endif
+
+#define DML_WRAPPER_TRANSLATION_
+#include "dml_wrapper_translation.c"
+#undef DML_WRAPPER_TRANSLATION_
+
+static bool is_dual_plane(enum surface_pixel_format format)
+{
+ return format >= SURFACE_PIXEL_FORMAT_VIDEO_BEGIN || format == SURFACE_PIXEL_FORMAT_GRPH_RGBE_ALPHA;
+}
+
+static void build_clamping_params(struct dc_stream_state *stream)
+{
+ stream->clamping.clamping_level = CLAMPING_FULL_RANGE;
+ stream->clamping.c_depth = stream->timing.display_color_depth;
+ stream->clamping.pixel_encoding = stream->timing.pixel_encoding;
+}
+
+static void get_pixel_clock_parameters(
+ const struct pipe_ctx *pipe_ctx,
+ struct pixel_clk_params *pixel_clk_params)
+{
+ const struct dc_stream_state *stream = pipe_ctx->stream;
+
+ /*TODO: is this halved for YCbCr 420? in that case we might want to move
+ * the pixel clock normalization for hdmi up to here instead of doing it
+ * in pll_adjust_pix_clk
+ */
+ pixel_clk_params->requested_pix_clk_100hz = stream->timing.pix_clk_100hz;
+ pixel_clk_params->encoder_object_id = stream->link->link_enc->id;
+ pixel_clk_params->signal_type = pipe_ctx->stream->signal;
+ pixel_clk_params->controller_id = pipe_ctx->stream_res.tg->inst + 1;
+ /* TODO: un-hardcode*/
+ pixel_clk_params->requested_sym_clk = LINK_RATE_LOW *
+ LINK_RATE_REF_FREQ_IN_KHZ;
+ pixel_clk_params->flags.ENABLE_SS = 0;
+ pixel_clk_params->color_depth =
+ stream->timing.display_color_depth;
+ pixel_clk_params->flags.DISPLAY_BLANKED = 1;
+ pixel_clk_params->flags.SUPPORT_YCBCR420 = (stream->timing.pixel_encoding ==
+ PIXEL_ENCODING_YCBCR420);
+ pixel_clk_params->pixel_encoding = stream->timing.pixel_encoding;
+ if (stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR422) {
+ pixel_clk_params->color_depth = COLOR_DEPTH_888;
+ }
+ if (stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420) {
+ pixel_clk_params->requested_pix_clk_100hz = pixel_clk_params->requested_pix_clk_100hz / 2;
+ }
+ if (stream->timing.timing_3d_format == TIMING_3D_FORMAT_HW_FRAME_PACKING)
+ pixel_clk_params->requested_pix_clk_100hz *= 2;
+
+}
+
+static enum dc_status build_pipe_hw_param(struct pipe_ctx *pipe_ctx)
+{
+ get_pixel_clock_parameters(pipe_ctx, &pipe_ctx->stream_res.pix_clk_params);
+
+ if (pipe_ctx->clock_source)
+ pipe_ctx->clock_source->funcs->get_pix_clk_dividers(
+ pipe_ctx->clock_source,
+ &pipe_ctx->stream_res.pix_clk_params,
+ &pipe_ctx->pll_settings);
+
+ pipe_ctx->stream->clamping.pixel_encoding = pipe_ctx->stream->timing.pixel_encoding;
+
+ resource_build_bit_depth_reduction_params(pipe_ctx->stream,
+ &pipe_ctx->stream->bit_depth_params);
+ build_clamping_params(pipe_ctx->stream);
+
+ return DC_OK;
+}
+
+static void resource_build_bit_depth_reduction_params(struct dc_stream_state *stream,
+ struct bit_depth_reduction_params *fmt_bit_depth)
+{
+ enum dc_dither_option option = stream->dither_option;
+ enum dc_pixel_encoding pixel_encoding =
+ stream->timing.pixel_encoding;
+
+ memset(fmt_bit_depth, 0, sizeof(*fmt_bit_depth));
+
+ if (option == DITHER_OPTION_DEFAULT) {
+ switch (stream->timing.display_color_depth) {
+ case COLOR_DEPTH_666:
+ option = DITHER_OPTION_SPATIAL6;
+ break;
+ case COLOR_DEPTH_888:
+ option = DITHER_OPTION_SPATIAL8;
+ break;
+ case COLOR_DEPTH_101010:
+ option = DITHER_OPTION_SPATIAL10;
+ break;
+ default:
+ option = DITHER_OPTION_DISABLE;
+ }
+ }
+
+ if (option == DITHER_OPTION_DISABLE)
+ return;
+
+ if (option == DITHER_OPTION_TRUN6) {
+ fmt_bit_depth->flags.TRUNCATE_ENABLED = 1;
+ fmt_bit_depth->flags.TRUNCATE_DEPTH = 0;
+ } else if (option == DITHER_OPTION_TRUN8 ||
+ option == DITHER_OPTION_TRUN8_SPATIAL6 ||
+ option == DITHER_OPTION_TRUN8_FM6) {
+ fmt_bit_depth->flags.TRUNCATE_ENABLED = 1;
+ fmt_bit_depth->flags.TRUNCATE_DEPTH = 1;
+ } else if (option == DITHER_OPTION_TRUN10 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL6 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL8 ||
+ option == DITHER_OPTION_TRUN10_FM8 ||
+ option == DITHER_OPTION_TRUN10_FM6 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL8_FM6) {
+ fmt_bit_depth->flags.TRUNCATE_ENABLED = 1;
+ fmt_bit_depth->flags.TRUNCATE_DEPTH = 2;
+ }
+
+ /* special case - Formatter can only reduce by 4 bits at most.
+ * When reducing from 12 to 6 bits,
+ * HW recommends we use trunc with round mode
+ * (if we did nothing, trunc to 10 bits would be used)
+ * note that any 12->10 bit reduction is ignored prior to DCE8,
+ * as the input was 10 bits.
+ */
+ if (option == DITHER_OPTION_SPATIAL6_FRAME_RANDOM ||
+ option == DITHER_OPTION_SPATIAL6 ||
+ option == DITHER_OPTION_FM6) {
+ fmt_bit_depth->flags.TRUNCATE_ENABLED = 1;
+ fmt_bit_depth->flags.TRUNCATE_DEPTH = 2;
+ fmt_bit_depth->flags.TRUNCATE_MODE = 1;
+ }
+
+ /* spatial dither
+ * note that spatial modes 1-3 are never used
+ */
+ if (option == DITHER_OPTION_SPATIAL6_FRAME_RANDOM ||
+ option == DITHER_OPTION_SPATIAL6 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL6 ||
+ option == DITHER_OPTION_TRUN8_SPATIAL6) {
+ fmt_bit_depth->flags.SPATIAL_DITHER_ENABLED = 1;
+ fmt_bit_depth->flags.SPATIAL_DITHER_DEPTH = 0;
+ fmt_bit_depth->flags.HIGHPASS_RANDOM = 1;
+ fmt_bit_depth->flags.RGB_RANDOM =
+ (pixel_encoding == PIXEL_ENCODING_RGB) ? 1 : 0;
+ } else if (option == DITHER_OPTION_SPATIAL8_FRAME_RANDOM ||
+ option == DITHER_OPTION_SPATIAL8 ||
+ option == DITHER_OPTION_SPATIAL8_FM6 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL8 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL8_FM6) {
+ fmt_bit_depth->flags.SPATIAL_DITHER_ENABLED = 1;
+ fmt_bit_depth->flags.SPATIAL_DITHER_DEPTH = 1;
+ fmt_bit_depth->flags.HIGHPASS_RANDOM = 1;
+ fmt_bit_depth->flags.RGB_RANDOM =
+ (pixel_encoding == PIXEL_ENCODING_RGB) ? 1 : 0;
+ } else if (option == DITHER_OPTION_SPATIAL10_FRAME_RANDOM ||
+ option == DITHER_OPTION_SPATIAL10 ||
+ option == DITHER_OPTION_SPATIAL10_FM8 ||
+ option == DITHER_OPTION_SPATIAL10_FM6) {
+ fmt_bit_depth->flags.SPATIAL_DITHER_ENABLED = 1;
+ fmt_bit_depth->flags.SPATIAL_DITHER_DEPTH = 2;
+ fmt_bit_depth->flags.HIGHPASS_RANDOM = 1;
+ fmt_bit_depth->flags.RGB_RANDOM =
+ (pixel_encoding == PIXEL_ENCODING_RGB) ? 1 : 0;
+ }
+
+ if (option == DITHER_OPTION_SPATIAL6 ||
+ option == DITHER_OPTION_SPATIAL8 ||
+ option == DITHER_OPTION_SPATIAL10) {
+ fmt_bit_depth->flags.FRAME_RANDOM = 0;
+ } else {
+ fmt_bit_depth->flags.FRAME_RANDOM = 1;
+ }
+
+ //////////////////////
+ //// temporal dither
+ //////////////////////
+ if (option == DITHER_OPTION_FM6 ||
+ option == DITHER_OPTION_SPATIAL8_FM6 ||
+ option == DITHER_OPTION_SPATIAL10_FM6 ||
+ option == DITHER_OPTION_TRUN10_FM6 ||
+ option == DITHER_OPTION_TRUN8_FM6 ||
+ option == DITHER_OPTION_TRUN10_SPATIAL8_FM6) {
+ fmt_bit_depth->flags.FRAME_MODULATION_ENABLED = 1;
+ fmt_bit_depth->flags.FRAME_MODULATION_DEPTH = 0;
+ } else if (option == DITHER_OPTION_FM8 ||
+ option == DITHER_OPTION_SPATIAL10_FM8 ||
+ option == DITHER_OPTION_TRUN10_FM8) {
+ fmt_bit_depth->flags.FRAME_MODULATION_ENABLED = 1;
+ fmt_bit_depth->flags.FRAME_MODULATION_DEPTH = 1;
+ } else if (option == DITHER_OPTION_FM10) {
+ fmt_bit_depth->flags.FRAME_MODULATION_ENABLED = 1;
+ fmt_bit_depth->flags.FRAME_MODULATION_DEPTH = 2;
+ }
+
+ fmt_bit_depth->pixel_encoding = pixel_encoding;
+}
+
+bool dml_validate_dsc(struct dc *dc, struct dc_state *new_ctx)
+{
+ int i;
+
+ /* Validate DSC config, dsc count validation is already done */
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe_ctx = &new_ctx->res_ctx.pipe_ctx[i];
+ struct dc_stream_state *stream = pipe_ctx->stream;
+ struct dsc_config dsc_cfg;
+ struct pipe_ctx *odm_pipe;
+ int opp_cnt = 1;
+
+ for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe)
+ opp_cnt++;
+
+ /* Only need to validate top pipe */
+ if (pipe_ctx->top_pipe || pipe_ctx->prev_odm_pipe || !stream || !stream->timing.flags.DSC)
+ continue;
+
+ dsc_cfg.pic_width = (stream->timing.h_addressable + stream->timing.h_border_left
+ + stream->timing.h_border_right) / opp_cnt;
+ dsc_cfg.pic_height = stream->timing.v_addressable + stream->timing.v_border_top
+ + stream->timing.v_border_bottom;
+ dsc_cfg.pixel_encoding = stream->timing.pixel_encoding;
+ dsc_cfg.color_depth = stream->timing.display_color_depth;
+ dsc_cfg.is_odm = pipe_ctx->next_odm_pipe ? true : false;
+ dsc_cfg.dc_dsc_cfg = stream->timing.dsc_cfg;
+ dsc_cfg.dc_dsc_cfg.num_slices_h /= opp_cnt;
+
+ if (pipe_ctx->stream_res.dsc && !pipe_ctx->stream_res.dsc->funcs->dsc_validate_stream(pipe_ctx->stream_res.dsc, &dsc_cfg))
+ return false;
+ }
+ return true;
+}
+
+enum dc_status dml_build_mapped_resource(const struct dc *dc, struct dc_state *context, struct dc_stream_state *stream)
+{
+ enum dc_status status = DC_OK;
+ struct pipe_ctx *pipe_ctx = resource_get_head_pipe_for_stream(&context->res_ctx, stream);
+
+ if (!pipe_ctx)
+ return DC_ERROR_UNEXPECTED;
+
+
+ status = build_pipe_hw_param(pipe_ctx);
+
+ return status;
+}
+
+void dml_acquire_dsc(const struct dc *dc,
+ struct resource_context *res_ctx,
+ struct display_stream_compressor **dsc,
+ int pipe_idx)
+{
+ int i;
+ const struct resource_pool *pool = dc->res_pool;
+ struct display_stream_compressor *dsc_old = dc->current_state->res_ctx.pipe_ctx[pipe_idx].stream_res.dsc;
+
+ ASSERT(*dsc == NULL); /* If this ASSERT fails, dsc was not released properly */
+ *dsc = NULL;
+
+ /* Always do 1-to-1 mapping when number of DSCs is same as number of pipes */
+ if (pool->res_cap->num_dsc == pool->res_cap->num_opp) {
+ *dsc = pool->dscs[pipe_idx];
+ res_ctx->is_dsc_acquired[pipe_idx] = true;
+ return;
+ }
+
+ /* Return old DSC to avoid the need for redo it */
+ if (dsc_old && !res_ctx->is_dsc_acquired[dsc_old->inst]) {
+ *dsc = dsc_old;
+ res_ctx->is_dsc_acquired[dsc_old->inst] = true;
+ return ;
+ }
+
+ /* Find first free DSC */
+ for (i = 0; i < pool->res_cap->num_dsc; i++)
+ if (!res_ctx->is_dsc_acquired[i]) {
+ *dsc = pool->dscs[i];
+ res_ctx->is_dsc_acquired[i] = true;
+ break;
+ }
+}
+
+static bool dml_split_stream_for_mpc_or_odm(
+ const struct dc *dc,
+ struct resource_context *res_ctx,
+ struct pipe_ctx *pri_pipe,
+ struct pipe_ctx *sec_pipe,
+ bool odm)
+{
+ int pipe_idx = sec_pipe->pipe_idx;
+ const struct resource_pool *pool = dc->res_pool;
+
+ *sec_pipe = *pri_pipe;
+
+ sec_pipe->pipe_idx = pipe_idx;
+ sec_pipe->plane_res.mi = pool->mis[pipe_idx];
+ sec_pipe->plane_res.hubp = pool->hubps[pipe_idx];
+ sec_pipe->plane_res.ipp = pool->ipps[pipe_idx];
+ sec_pipe->plane_res.xfm = pool->transforms[pipe_idx];
+ sec_pipe->plane_res.dpp = pool->dpps[pipe_idx];
+ sec_pipe->plane_res.mpcc_inst = pool->dpps[pipe_idx]->inst;
+ sec_pipe->stream_res.dsc = NULL;
+ if (odm) {
+ if (pri_pipe->next_odm_pipe) {
+ ASSERT(pri_pipe->next_odm_pipe != sec_pipe);
+ sec_pipe->next_odm_pipe = pri_pipe->next_odm_pipe;
+ sec_pipe->next_odm_pipe->prev_odm_pipe = sec_pipe;
+ }
+ if (pri_pipe->top_pipe && pri_pipe->top_pipe->next_odm_pipe) {
+ pri_pipe->top_pipe->next_odm_pipe->bottom_pipe = sec_pipe;
+ sec_pipe->top_pipe = pri_pipe->top_pipe->next_odm_pipe;
+ }
+ if (pri_pipe->bottom_pipe && pri_pipe->bottom_pipe->next_odm_pipe) {
+ pri_pipe->bottom_pipe->next_odm_pipe->top_pipe = sec_pipe;
+ sec_pipe->bottom_pipe = pri_pipe->bottom_pipe->next_odm_pipe;
+ }
+ pri_pipe->next_odm_pipe = sec_pipe;
+ sec_pipe->prev_odm_pipe = pri_pipe;
+ ASSERT(sec_pipe->top_pipe == NULL);
+
+ if (!sec_pipe->top_pipe)
+ sec_pipe->stream_res.opp = pool->opps[pipe_idx];
+ else
+ sec_pipe->stream_res.opp = sec_pipe->top_pipe->stream_res.opp;
+ if (sec_pipe->stream->timing.flags.DSC == 1) {
+ dml_acquire_dsc(dc, res_ctx, &sec_pipe->stream_res.dsc, pipe_idx);
+ ASSERT(sec_pipe->stream_res.dsc);
+ if (sec_pipe->stream_res.dsc == NULL)
+ return false;
+ }
+ } else {
+ if (pri_pipe->bottom_pipe) {
+ ASSERT(pri_pipe->bottom_pipe != sec_pipe);
+ sec_pipe->bottom_pipe = pri_pipe->bottom_pipe;
+ sec_pipe->bottom_pipe->top_pipe = sec_pipe;
+ }
+ pri_pipe->bottom_pipe = sec_pipe;
+ sec_pipe->top_pipe = pri_pipe;
+
+ ASSERT(pri_pipe->plane_state);
+ }
+
+ return true;
+}
+
+static struct pipe_ctx *dml_find_split_pipe(
+ struct dc *dc,
+ struct dc_state *context,
+ int old_index)
+{
+ struct pipe_ctx *pipe = NULL;
+ int i;
+
+ if (old_index >= 0 && context->res_ctx.pipe_ctx[old_index].stream == NULL) {
+ pipe = &context->res_ctx.pipe_ctx[old_index];
+ pipe->pipe_idx = old_index;
+ }
+
+ if (!pipe)
+ for (i = dc->res_pool->pipe_count - 1; i >= 0; i--) {
+ if (dc->current_state->res_ctx.pipe_ctx[i].top_pipe == NULL
+ && dc->current_state->res_ctx.pipe_ctx[i].prev_odm_pipe == NULL) {
+ if (context->res_ctx.pipe_ctx[i].stream == NULL) {
+ pipe = &context->res_ctx.pipe_ctx[i];
+ pipe->pipe_idx = i;
+ break;
+ }
+ }
+ }
+
+ /*
+ * May need to fix pipes getting tossed from 1 opp to another on flip
+ * Add for debugging transient underflow during topology updates:
+ * ASSERT(pipe);
+ */
+ if (!pipe)
+ for (i = dc->res_pool->pipe_count - 1; i >= 0; i--) {
+ if (context->res_ctx.pipe_ctx[i].stream == NULL) {
+ pipe = &context->res_ctx.pipe_ctx[i];
+ pipe->pipe_idx = i;
+ break;
+ }
+ }
+
+ return pipe;
+}
+
+static void dml_release_dsc(struct resource_context *res_ctx,
+ const struct resource_pool *pool,
+ struct display_stream_compressor **dsc)
+{
+ int i;
+
+ for (i = 0; i < pool->res_cap->num_dsc; i++)
+ if (pool->dscs[i] == *dsc) {
+ res_ctx->is_dsc_acquired[i] = false;
+ *dsc = NULL;
+ break;
+ }
+}
+
+static int dml_get_num_mpc_splits(struct pipe_ctx *pipe)
+{
+ int mpc_split_count = 0;
+ struct pipe_ctx *other_pipe = pipe->bottom_pipe;
+
+ while (other_pipe && other_pipe->plane_state == pipe->plane_state) {
+ mpc_split_count++;
+ other_pipe = other_pipe->bottom_pipe;
+ }
+ other_pipe = pipe->top_pipe;
+ while (other_pipe && other_pipe->plane_state == pipe->plane_state) {
+ mpc_split_count++;
+ other_pipe = other_pipe->top_pipe;
+ }
+
+ return mpc_split_count;
+}
+
+static bool dml_enough_pipes_for_subvp(struct dc *dc,
+ struct dc_state *context)
+{
+ int i = 0;
+ int num_pipes = 0;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe->stream && pipe->plane_state)
+ num_pipes++;
+ }
+
+ // Sub-VP only possible if the number of "real" pipes is
+ // less than or equal to half the number of available pipes
+ if (num_pipes * 2 > dc->res_pool->pipe_count)
+ return false;
+
+ return true;
+}
+
+static int dml_validate_apply_pipe_split_flags(
+ struct dc *dc,
+ struct dc_state *context,
+ int vlevel,
+ int *split,
+ bool *merge)
+{
+ int i, pipe_idx, vlevel_split;
+ int plane_count = 0;
+ bool force_split = false;
+ bool avoid_split = dc->debug.pipe_split_policy == MPC_SPLIT_AVOID;
+ struct vba_vars_st *v = &context->bw_ctx.dml.vba;
+ int max_mpc_comb = v->maxMpcComb;
+
+ if (context->stream_count > 1) {
+ if (dc->debug.pipe_split_policy == MPC_SPLIT_AVOID_MULT_DISP)
+ avoid_split = true;
+ } else if (dc->debug.force_single_disp_pipe_split)
+ force_split = true;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ /**
+ * Workaround for avoiding pipe-split in cases where we'd split
+ * planes that are too small, resulting in splits that aren't
+ * valid for the scaler.
+ */
+ if (pipe->plane_state &&
+ (pipe->plane_state->dst_rect.width <= 16 ||
+ pipe->plane_state->dst_rect.height <= 16 ||
+ pipe->plane_state->src_rect.width <= 16 ||
+ pipe->plane_state->src_rect.height <= 16))
+ avoid_split = true;
+
+ /* TODO: fix dc bugs and remove this split threshold thing */
+ if (pipe->stream && !pipe->prev_odm_pipe &&
+ (!pipe->top_pipe || pipe->top_pipe->plane_state != pipe->plane_state))
+ ++plane_count;
+ }
+ if (plane_count > dc->res_pool->pipe_count / 2)
+ avoid_split = true;
+
+ /* W/A: Mode timing with borders may not work well with pipe split, avoid for this corner case */
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ struct dc_crtc_timing timing;
+
+ if (!pipe->stream)
+ continue;
+ else {
+ timing = pipe->stream->timing;
+ if (timing.h_border_left + timing.h_border_right
+ + timing.v_border_top + timing.v_border_bottom > 0) {
+ avoid_split = true;
+ break;
+ }
+ }
+ }
+
+ /* Avoid split loop looks for lowest voltage level that allows most unsplit pipes possible */
+ if (avoid_split) {
+ for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+ if (!context->res_ctx.pipe_ctx[i].stream)
+ continue;
+
+ for (vlevel_split = vlevel; vlevel <= context->bw_ctx.dml.soc.num_states; vlevel++)
+ if (v->NoOfDPP[vlevel][0][pipe_idx] == 1 &&
+ v->ModeSupport[vlevel][0])
+ break;
+ /* Impossible to not split this pipe */
+ if (vlevel > context->bw_ctx.dml.soc.num_states)
+ vlevel = vlevel_split;
+ else
+ max_mpc_comb = 0;
+ pipe_idx++;
+ }
+ v->maxMpcComb = max_mpc_comb;
+ }
+
+ /* Split loop sets which pipe should be split based on dml outputs and dc flags */
+ for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ int pipe_plane = v->pipe_plane[pipe_idx];
+ bool split4mpc = context->stream_count == 1 && plane_count == 1
+ && dc->config.enable_4to1MPC && dc->res_pool->pipe_count >= 4;
+
+ if (!context->res_ctx.pipe_ctx[i].stream)
+ continue;
+
+ if (split4mpc || v->NoOfDPP[vlevel][max_mpc_comb][pipe_plane] == 4)
+ split[i] = 4;
+ else if (force_split || v->NoOfDPP[vlevel][max_mpc_comb][pipe_plane] == 2)
+ split[i] = 2;
+
+ if ((pipe->stream->view_format ==
+ VIEW_3D_FORMAT_SIDE_BY_SIDE ||
+ pipe->stream->view_format ==
+ VIEW_3D_FORMAT_TOP_AND_BOTTOM) &&
+ (pipe->stream->timing.timing_3d_format ==
+ TIMING_3D_FORMAT_TOP_AND_BOTTOM ||
+ pipe->stream->timing.timing_3d_format ==
+ TIMING_3D_FORMAT_SIDE_BY_SIDE))
+ split[i] = 2;
+ if (dc->debug.force_odm_combine & (1 << pipe->stream_res.tg->inst)) {
+ split[i] = 2;
+ v->ODMCombineEnablePerState[vlevel][pipe_plane] = dm_odm_combine_mode_2to1;
+ }
+ if (dc->debug.force_odm_combine_4to1 & (1 << pipe->stream_res.tg->inst)) {
+ split[i] = 4;
+ v->ODMCombineEnablePerState[vlevel][pipe_plane] = dm_odm_combine_mode_4to1;
+ }
+ /*420 format workaround*/
+ if (pipe->stream->timing.h_addressable > 7680 &&
+ pipe->stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420) {
+ split[i] = 4;
+ }
+
+ v->ODMCombineEnabled[pipe_plane] =
+ v->ODMCombineEnablePerState[vlevel][pipe_plane];
+
+ if (v->ODMCombineEnabled[pipe_plane] == dm_odm_combine_mode_disabled) {
+ if (dml_get_num_mpc_splits(pipe) == 1) {
+ /*If need split for mpc but 2 way split already*/
+ if (split[i] == 4)
+ split[i] = 2; /* 2 -> 4 MPC */
+ else if (split[i] == 2)
+ split[i] = 0; /* 2 -> 2 MPC */
+ else if (pipe->top_pipe && pipe->top_pipe->plane_state == pipe->plane_state)
+ merge[i] = true; /* 2 -> 1 MPC */
+ } else if (dml_get_num_mpc_splits(pipe) == 3) {
+ /*If need split for mpc but 4 way split already*/
+ if (split[i] == 2 && ((pipe->top_pipe && !pipe->top_pipe->top_pipe)
+ || !pipe->bottom_pipe)) {
+ merge[i] = true; /* 4 -> 2 MPC */
+ } else if (split[i] == 0 && pipe->top_pipe &&
+ pipe->top_pipe->plane_state == pipe->plane_state)
+ merge[i] = true; /* 4 -> 1 MPC */
+ split[i] = 0;
+ } else if (dml_get_num_mpc_splits(pipe)) {
+ /* ODM -> MPC transition */
+ if (pipe->prev_odm_pipe) {
+ split[i] = 0;
+ merge[i] = true;
+ }
+ }
+ } else {
+ if (dml_get_num_mpc_splits(pipe) == 1) {
+ /*If need split for odm but 2 way split already*/
+ if (split[i] == 4)
+ split[i] = 2; /* 2 -> 4 ODM */
+ else if (split[i] == 2)
+ split[i] = 0; /* 2 -> 2 ODM */
+ else if (pipe->prev_odm_pipe) {
+ ASSERT(0); /* NOT expected yet */
+ merge[i] = true; /* exit ODM */
+ }
+ } else if (dml_get_num_mpc_splits(pipe) == 3) {
+ /*If need split for odm but 4 way split already*/
+ if (split[i] == 2 && ((pipe->prev_odm_pipe && !pipe->prev_odm_pipe->prev_odm_pipe)
+ || !pipe->next_odm_pipe)) {
+ ASSERT(0); /* NOT expected yet */
+ merge[i] = true; /* 4 -> 2 ODM */
+ } else if (split[i] == 0 && pipe->prev_odm_pipe) {
+ ASSERT(0); /* NOT expected yet */
+ merge[i] = true; /* exit ODM */
+ }
+ split[i] = 0;
+ } else if (dml_get_num_mpc_splits(pipe)) {
+ /* MPC -> ODM transition */
+ ASSERT(0); /* NOT expected yet */
+ if (pipe->top_pipe && pipe->top_pipe->plane_state == pipe->plane_state) {
+ split[i] = 0;
+ merge[i] = true;
+ }
+ }
+ }
+
+ /* Adjust dppclk when split is forced, do not bother with dispclk */
+ if (split[i] != 0 && v->NoOfDPP[vlevel][max_mpc_comb][pipe_idx] == 1)
+ v->RequiredDPPCLK[vlevel][max_mpc_comb][pipe_idx] /= 2;
+ pipe_idx++;
+ }
+
+ return vlevel;
+}
+
+static void dml_set_phantom_stream_timing(struct dc *dc,
+ struct dc_state *context,
+ struct pipe_ctx *ref_pipe,
+ struct dc_stream_state *phantom_stream)
+{
+ // phantom_vactive = blackout (latency + margin) + fw_processing_delays + pstate allow width
+ uint32_t phantom_vactive_us = context->bw_ctx.dml.soc.dram_clock_change_latency_us + 60 +
+ dc->caps.subvp_fw_processing_delay_us +
+ dc->caps.subvp_pstate_allow_width_us;
+ uint32_t phantom_vactive = ((double)phantom_vactive_us/1000000) *
+ (ref_pipe->stream->timing.pix_clk_100hz * 100) /
+ (double)ref_pipe->stream->timing.h_total;
+ uint32_t phantom_bp = ref_pipe->pipe_dlg_param.vstartup_start;
+
+ phantom_stream->dst.y = 0;
+ phantom_stream->dst.height = phantom_vactive;
+ phantom_stream->src.y = 0;
+ phantom_stream->src.height = phantom_vactive;
+
+ phantom_stream->timing.v_addressable = phantom_vactive;
+ phantom_stream->timing.v_front_porch = 1;
+ phantom_stream->timing.v_total = phantom_stream->timing.v_addressable +
+ phantom_stream->timing.v_front_porch +
+ phantom_stream->timing.v_sync_width +
+ phantom_bp;
+}
+
+static struct dc_stream_state *dml_enable_phantom_stream(struct dc *dc,
+ struct dc_state *context,
+ struct pipe_ctx *ref_pipe)
+{
+ struct dc_stream_state *phantom_stream = NULL;
+
+ phantom_stream = dc_create_stream_for_sink(ref_pipe->stream->sink);
+ phantom_stream->signal = SIGNAL_TYPE_VIRTUAL;
+ phantom_stream->dpms_off = true;
+ phantom_stream->mall_stream_config.type = SUBVP_PHANTOM;
+ phantom_stream->mall_stream_config.paired_stream = ref_pipe->stream;
+ ref_pipe->stream->mall_stream_config.type = SUBVP_MAIN;
+ ref_pipe->stream->mall_stream_config.paired_stream = phantom_stream;
+
+ /* stream has limited viewport and small timing */
+ memcpy(&phantom_stream->timing, &ref_pipe->stream->timing, sizeof(phantom_stream->timing));
+ memcpy(&phantom_stream->src, &ref_pipe->stream->src, sizeof(phantom_stream->src));
+ memcpy(&phantom_stream->dst, &ref_pipe->stream->dst, sizeof(phantom_stream->dst));
+ dml_set_phantom_stream_timing(dc, context, ref_pipe, phantom_stream);
+
+ dc_add_stream_to_ctx(dc, context, phantom_stream);
+ dc->hwss.apply_ctx_to_hw(dc, context);
+ return phantom_stream;
+}
+
+static void dml_enable_phantom_plane(struct dc *dc,
+ struct dc_state *context,
+ struct dc_stream_state *phantom_stream,
+ struct pipe_ctx *main_pipe)
+{
+ struct dc_plane_state *phantom_plane = NULL;
+ struct dc_plane_state *prev_phantom_plane = NULL;
+ struct pipe_ctx *curr_pipe = main_pipe;
+
+ while (curr_pipe) {
+ if (curr_pipe->top_pipe && curr_pipe->top_pipe->plane_state == curr_pipe->plane_state)
+ phantom_plane = prev_phantom_plane;
+ else
+ phantom_plane = dc_create_plane_state(dc);
+
+ memcpy(&phantom_plane->address, &curr_pipe->plane_state->address, sizeof(phantom_plane->address));
+ memcpy(&phantom_plane->scaling_quality, &curr_pipe->plane_state->scaling_quality,
+ sizeof(phantom_plane->scaling_quality));
+ memcpy(&phantom_plane->src_rect, &curr_pipe->plane_state->src_rect, sizeof(phantom_plane->src_rect));
+ memcpy(&phantom_plane->dst_rect, &curr_pipe->plane_state->dst_rect, sizeof(phantom_plane->dst_rect));
+ memcpy(&phantom_plane->clip_rect, &curr_pipe->plane_state->clip_rect, sizeof(phantom_plane->clip_rect));
+ memcpy(&phantom_plane->plane_size, &curr_pipe->plane_state->plane_size,
+ sizeof(phantom_plane->plane_size));
+ memcpy(&phantom_plane->tiling_info, &curr_pipe->plane_state->tiling_info,
+ sizeof(phantom_plane->tiling_info));
+ memcpy(&phantom_plane->dcc, &curr_pipe->plane_state->dcc, sizeof(phantom_plane->dcc));
+ /* Currently compat_level is undefined in dc_state
+ * phantom_plane->compat_level = curr_pipe->plane_state->compat_level;
+ */
+ phantom_plane->format = curr_pipe->plane_state->format;
+ phantom_plane->rotation = curr_pipe->plane_state->rotation;
+ phantom_plane->visible = curr_pipe->plane_state->visible;
+
+ /* Shadow pipe has small viewport. */
+ phantom_plane->clip_rect.y = 0;
+ phantom_plane->clip_rect.height = phantom_stream->timing.v_addressable;
+
+ dc_add_plane_to_context(dc, phantom_stream, phantom_plane, context);
+
+ curr_pipe = curr_pipe->bottom_pipe;
+ prev_phantom_plane = phantom_plane;
+ }
+}
+
+static void dml_add_phantom_pipes(struct dc *dc, struct dc_state *context)
+{
+ int i = 0;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ struct dc_stream_state *ref_stream = pipe->stream;
+ // Only construct phantom stream for top pipes that have plane enabled
+ if (!pipe->top_pipe && pipe->plane_state && pipe->stream &&
+ pipe->stream->mall_stream_config.type == SUBVP_NONE) {
+ struct dc_stream_state *phantom_stream = NULL;
+
+ phantom_stream = dml_enable_phantom_stream(dc, context, pipe);
+ dml_enable_phantom_plane(dc, context, phantom_stream, pipe);
+ }
+ }
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe->plane_state && pipe->stream &&
+ pipe->stream->mall_stream_config.type == SUBVP_PHANTOM) {
+ pipe->stream->use_dynamic_meta = false;
+ pipe->plane_state->flip_immediate = false;
+ if (!resource_build_scaling_params(pipe)) {
+ // Log / remove phantom pipes since failed to build scaling params
+ }
+ }
+ }
+}
+
+static void dml_remove_phantom_pipes(struct dc *dc, struct dc_state *context)
+{
+ int i;
+ bool removed_pipe = false;
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ // build scaling params for phantom pipes
+ if (pipe->plane_state && pipe->stream && pipe->stream->mall_stream_config.type == SUBVP_PHANTOM) {
+ dc_rem_all_planes_for_stream(dc, pipe->stream, context);
+ dc_remove_stream_from_ctx(dc, context, pipe->stream);
+ removed_pipe = true;
+ }
+
+ // Clear all phantom stream info
+ if (pipe->stream) {
+ pipe->stream->mall_stream_config.type = SUBVP_NONE;
+ pipe->stream->mall_stream_config.paired_stream = NULL;
+ }
+ }
+ if (removed_pipe)
+ dc->hwss.apply_ctx_to_hw(dc, context);
+}
+
+/*
+ * If the input state contains no upstream planes for a particular pipe (i.e. only timing)
+ * we need to populate some "conservative" plane information as DML cannot handle "no planes"
+ */
+static void populate_default_plane_from_timing(const struct dc_crtc_timing *timing, struct _vcs_dpi_display_pipe_params_st *pipe)
+{
+ pipe->src.is_hsplit = pipe->dest.odm_combine != dm_odm_combine_mode_disabled;
+ pipe->src.source_scan = dm_horz;
+ pipe->src.sw_mode = dm_sw_4kb_s;
+ pipe->src.macro_tile_size = dm_64k_tile;
+ pipe->src.viewport_width = timing->h_addressable;
+ if (pipe->src.viewport_width > 1920)
+ pipe->src.viewport_width = 1920;
+ pipe->src.viewport_height = timing->v_addressable;
+ if (pipe->src.viewport_height > 1080)
+ pipe->src.viewport_height = 1080;
+ pipe->src.surface_height_y = pipe->src.viewport_height;
+ pipe->src.surface_width_y = pipe->src.viewport_width;
+ pipe->src.surface_height_c = pipe->src.viewport_height;
+ pipe->src.surface_width_c = pipe->src.viewport_width;
+ pipe->src.data_pitch = ((pipe->src.viewport_width + 255) / 256) * 256;
+ pipe->src.source_format = dm_444_32;
+ pipe->dest.recout_width = pipe->src.viewport_width;
+ pipe->dest.recout_height = pipe->src.viewport_height;
+ pipe->dest.full_recout_width = pipe->dest.recout_width;
+ pipe->dest.full_recout_height = pipe->dest.recout_height;
+ pipe->scale_ratio_depth.lb_depth = dm_lb_16;
+ pipe->scale_ratio_depth.hscl_ratio = 1.0;
+ pipe->scale_ratio_depth.vscl_ratio = 1.0;
+ pipe->scale_ratio_depth.scl_enable = 0;
+ pipe->scale_taps.htaps = 1;
+ pipe->scale_taps.vtaps = 1;
+ pipe->dest.vtotal_min = timing->v_total;
+ pipe->dest.vtotal_max = timing->v_total;
+
+ if (pipe->dest.odm_combine == dm_odm_combine_mode_2to1) {
+ pipe->src.viewport_width /= 2;
+ pipe->dest.recout_width /= 2;
+ } else if (pipe->dest.odm_combine == dm_odm_combine_mode_4to1) {
+ pipe->src.viewport_width /= 4;
+ pipe->dest.recout_width /= 4;
+ }
+
+ pipe->src.dcc = false;
+ pipe->src.dcc_rate = 1;
+}
+
+/*
+ * If the pipe is not blending (i.e. pipe_ctx->top pipe == null) then its
+ * hsplit group is equal to its own pipe ID
+ * Otherwise, all pipes part of the same blending tree have the same hsplit group
+ * ID as the top most pipe
+ *
+ * If the pipe ctx is ODM combined, then similar logic follows
+ */
+static void populate_hsplit_group_from_dc_pipe_ctx (const struct pipe_ctx *dc_pipe_ctx, struct _vcs_dpi_display_e2e_pipe_params_st *e2e_pipe)
+{
+ e2e_pipe->pipe.src.hsplit_grp = dc_pipe_ctx->pipe_idx;
+
+ if (dc_pipe_ctx->top_pipe && dc_pipe_ctx->top_pipe->plane_state
+ == dc_pipe_ctx->plane_state) {
+ struct pipe_ctx *first_pipe = dc_pipe_ctx->top_pipe;
+ int split_idx = 0;
+
+ while (first_pipe->top_pipe && first_pipe->top_pipe->plane_state
+ == dc_pipe_ctx->plane_state) {
+ first_pipe = first_pipe->top_pipe;
+ split_idx++;
+ }
+
+ /* Treat 4to1 mpc combine as an mpo of 2 2-to-1 combines */
+ if (split_idx == 0)
+ e2e_pipe->pipe.src.hsplit_grp = first_pipe->pipe_idx;
+ else if (split_idx == 1)
+ e2e_pipe->pipe.src.hsplit_grp = dc_pipe_ctx->pipe_idx;
+ else if (split_idx == 2)
+ e2e_pipe->pipe.src.hsplit_grp = dc_pipe_ctx->top_pipe->pipe_idx;
+
+ } else if (dc_pipe_ctx->prev_odm_pipe) {
+ struct pipe_ctx *first_pipe = dc_pipe_ctx->prev_odm_pipe;
+
+ while (first_pipe->prev_odm_pipe)
+ first_pipe = first_pipe->prev_odm_pipe;
+ e2e_pipe->pipe.src.hsplit_grp = first_pipe->pipe_idx;
+ }
+}
+
+static void populate_dml_from_dc_pipe_ctx (const struct pipe_ctx *dc_pipe_ctx, struct _vcs_dpi_display_e2e_pipe_params_st *e2e_pipe, int always_scale)
+{
+ const struct dc_plane_state *pln = dc_pipe_ctx->plane_state;
+ const struct scaler_data *scl = &dc_pipe_ctx->plane_res.scl_data;
+
+ e2e_pipe->pipe.src.immediate_flip = pln->flip_immediate;
+ e2e_pipe->pipe.src.is_hsplit = (dc_pipe_ctx->bottom_pipe && dc_pipe_ctx->bottom_pipe->plane_state == pln)
+ || (dc_pipe_ctx->top_pipe && dc_pipe_ctx->top_pipe->plane_state == pln)
+ || e2e_pipe->pipe.dest.odm_combine != dm_odm_combine_mode_disabled;
+
+ /* stereo is not split */
+ if (pln->stereo_format == PLANE_STEREO_FORMAT_SIDE_BY_SIDE ||
+ pln->stereo_format == PLANE_STEREO_FORMAT_TOP_AND_BOTTOM) {
+ e2e_pipe->pipe.src.is_hsplit = false;
+ e2e_pipe->pipe.src.hsplit_grp = dc_pipe_ctx->pipe_idx;
+ }
+
+ e2e_pipe->pipe.src.source_scan = pln->rotation == ROTATION_ANGLE_90
+ || pln->rotation == ROTATION_ANGLE_270 ? dm_vert : dm_horz;
+ e2e_pipe->pipe.src.viewport_y_y = scl->viewport.y;
+ e2e_pipe->pipe.src.viewport_y_c = scl->viewport_c.y;
+ e2e_pipe->pipe.src.viewport_width = scl->viewport.width;
+ e2e_pipe->pipe.src.viewport_width_c = scl->viewport_c.width;
+ e2e_pipe->pipe.src.viewport_height = scl->viewport.height;
+ e2e_pipe->pipe.src.viewport_height_c = scl->viewport_c.height;
+ e2e_pipe->pipe.src.viewport_width_max = pln->src_rect.width;
+ e2e_pipe->pipe.src.viewport_height_max = pln->src_rect.height;
+ e2e_pipe->pipe.src.surface_width_y = pln->plane_size.surface_size.width;
+ e2e_pipe->pipe.src.surface_height_y = pln->plane_size.surface_size.height;
+ e2e_pipe->pipe.src.surface_width_c = pln->plane_size.chroma_size.width;
+ e2e_pipe->pipe.src.surface_height_c = pln->plane_size.chroma_size.height;
+
+ if (pln->format == SURFACE_PIXEL_FORMAT_GRPH_RGBE_ALPHA
+ || pln->format >= SURFACE_PIXEL_FORMAT_VIDEO_BEGIN) {
+ e2e_pipe->pipe.src.data_pitch = pln->plane_size.surface_pitch;
+ e2e_pipe->pipe.src.data_pitch_c = pln->plane_size.chroma_pitch;
+ e2e_pipe->pipe.src.meta_pitch = pln->dcc.meta_pitch;
+ e2e_pipe->pipe.src.meta_pitch_c = pln->dcc.meta_pitch_c;
+ } else {
+ e2e_pipe->pipe.src.data_pitch = pln->plane_size.surface_pitch;
+ e2e_pipe->pipe.src.meta_pitch = pln->dcc.meta_pitch;
+ }
+ e2e_pipe->pipe.src.dcc = pln->dcc.enable;
+ e2e_pipe->pipe.src.dcc_rate = 1;
+ e2e_pipe->pipe.dest.recout_width = scl->recout.width;
+ e2e_pipe->pipe.dest.recout_height = scl->recout.height;
+ e2e_pipe->pipe.dest.full_recout_height = scl->recout.height;
+ e2e_pipe->pipe.dest.full_recout_width = scl->recout.width;
+ if (e2e_pipe->pipe.dest.odm_combine == dm_odm_combine_mode_2to1)
+ e2e_pipe->pipe.dest.full_recout_width *= 2;
+ else if (e2e_pipe->pipe.dest.odm_combine == dm_odm_combine_mode_4to1)
+ e2e_pipe->pipe.dest.full_recout_width *= 4;
+ else {
+ struct pipe_ctx *split_pipe = dc_pipe_ctx->bottom_pipe;
+
+ while (split_pipe && split_pipe->plane_state == pln) {
+ e2e_pipe->pipe.dest.full_recout_width += split_pipe->plane_res.scl_data.recout.width;
+ split_pipe = split_pipe->bottom_pipe;
+ }
+ split_pipe = dc_pipe_ctx->top_pipe;
+ while (split_pipe && split_pipe->plane_state == pln) {
+ e2e_pipe->pipe.dest.full_recout_width += split_pipe->plane_res.scl_data.recout.width;
+ split_pipe = split_pipe->top_pipe;
+ }
+ }
+
+ e2e_pipe->pipe.scale_ratio_depth.lb_depth = dm_lb_16;
+ e2e_pipe->pipe.scale_ratio_depth.hscl_ratio = (double) scl->ratios.horz.value / (1ULL<<32);
+ e2e_pipe->pipe.scale_ratio_depth.hscl_ratio_c = (double) scl->ratios.horz_c.value / (1ULL<<32);
+ e2e_pipe->pipe.scale_ratio_depth.vscl_ratio = (double) scl->ratios.vert.value / (1ULL<<32);
+ e2e_pipe->pipe.scale_ratio_depth.vscl_ratio_c = (double) scl->ratios.vert_c.value / (1ULL<<32);
+ e2e_pipe->pipe.scale_ratio_depth.scl_enable =
+ scl->ratios.vert.value != dc_fixpt_one.value
+ || scl->ratios.horz.value != dc_fixpt_one.value
+ || scl->ratios.vert_c.value != dc_fixpt_one.value
+ || scl->ratios.horz_c.value != dc_fixpt_one.value /*Lb only or Full scl*/
+ || always_scale; /*support always scale*/
+ e2e_pipe->pipe.scale_taps.htaps = scl->taps.h_taps;
+ e2e_pipe->pipe.scale_taps.htaps_c = scl->taps.h_taps_c;
+ e2e_pipe->pipe.scale_taps.vtaps = scl->taps.v_taps;
+ e2e_pipe->pipe.scale_taps.vtaps_c = scl->taps.v_taps_c;
+
+ /* Currently compat_level is not defined. Commenting it until further resolution
+ * if (pln->compat_level == DC_LEGACY_TILING_ADDR_GEN_TWO) {
+ swizzle_to_dml_params(pln->tiling_info.gfx9.swizzle,
+ &e2e_pipe->pipe.src.sw_mode);
+ e2e_pipe->pipe.src.macro_tile_size =
+ swizzle_mode_to_macro_tile_size(pln->tiling_info.gfx9.swizzle);
+ } else {
+ gfx10array_mode_to_dml_params(pln->tiling_info.gfx10compatible.array_mode,
+ pln->compat_level,
+ &e2e_pipe->pipe.src.sw_mode);
+ e2e_pipe->pipe.src.macro_tile_size = dm_4k_tile;
+ }*/
+
+ e2e_pipe->pipe.src.source_format = dc_source_format_to_dml_source_format(pln->format);
+}
+
+static void populate_dml_cursor_parameters_from_dc_pipe_ctx (const struct pipe_ctx *dc_pipe_ctx, struct _vcs_dpi_display_e2e_pipe_params_st *e2e_pipe)
+{
+ /*
+ * For graphic plane, cursor number is 1, nv12 is 0
+ * bw calculations due to cursor on/off
+ */
+ if (dc_pipe_ctx->plane_state &&
+ (dc_pipe_ctx->plane_state->address.type == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE ||
+ dc_pipe_ctx->stream->mall_stream_config.type == SUBVP_PHANTOM))
+ e2e_pipe->pipe.src.num_cursors = 0;
+ else
+ e2e_pipe->pipe.src.num_cursors = 1;
+
+ e2e_pipe->pipe.src.cur0_src_width = 256;
+ e2e_pipe->pipe.src.cur0_bpp = dm_cur_32bit;
+}
+
+static int populate_dml_pipes_from_context_base(
+ struct dc *dc,
+ struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ bool fast_validate)
+{
+ int pipe_cnt, i;
+ bool synchronized_vblank = true;
+ struct resource_context *res_ctx = &context->res_ctx;
+
+ for (i = 0, pipe_cnt = -1; i < dc->res_pool->pipe_count; i++) {
+ if (!res_ctx->pipe_ctx[i].stream)
+ continue;
+
+ if (pipe_cnt < 0) {
+ pipe_cnt = i;
+ continue;
+ }
+
+ if (res_ctx->pipe_ctx[pipe_cnt].stream == res_ctx->pipe_ctx[i].stream)
+ continue;
+
+ if (dc->debug.disable_timing_sync ||
+ (!resource_are_streams_timing_synchronizable(
+ res_ctx->pipe_ctx[pipe_cnt].stream,
+ res_ctx->pipe_ctx[i].stream) &&
+ !resource_are_vblanks_synchronizable(
+ res_ctx->pipe_ctx[pipe_cnt].stream,
+ res_ctx->pipe_ctx[i].stream))) {
+ synchronized_vblank = false;
+ break;
+ }
+ }
+
+ for (i = 0, pipe_cnt = 0; i < dc->res_pool->pipe_count; i++) {
+ struct dc_crtc_timing *timing = &res_ctx->pipe_ctx[i].stream->timing;
+
+ struct audio_check aud_check = {0};
+ if (!res_ctx->pipe_ctx[i].stream)
+ continue;
+
+ /* todo:
+ pipes[pipe_cnt].pipe.src.dynamic_metadata_enable = 0;
+ pipes[pipe_cnt].pipe.src.dcc = 0;
+ pipes[pipe_cnt].pipe.src.vm = 0;*/
+
+ pipes[pipe_cnt].clks_cfg.refclk_mhz = dc->res_pool->ref_clocks.dchub_ref_clock_inKhz / 1000.0;
+
+ pipes[pipe_cnt].dout.dsc_enable = res_ctx->pipe_ctx[i].stream->timing.flags.DSC;
+ /* todo: rotation?*/
+ pipes[pipe_cnt].dout.dsc_slices = res_ctx->pipe_ctx[i].stream->timing.dsc_cfg.num_slices_h;
+ if (res_ctx->pipe_ctx[i].stream->use_dynamic_meta) {
+ pipes[pipe_cnt].pipe.src.dynamic_metadata_enable = true;
+ /* 1/2 vblank */
+ pipes[pipe_cnt].pipe.src.dynamic_metadata_lines_before_active =
+ (timing->v_total - timing->v_addressable
+ - timing->v_border_top - timing->v_border_bottom) / 2;
+ /* 36 bytes dp, 32 hdmi */
+ pipes[pipe_cnt].pipe.src.dynamic_metadata_xmit_bytes =
+ dc_is_dp_signal(res_ctx->pipe_ctx[i].stream->signal) ? 36 : 32;
+ }
+ pipes[pipe_cnt].pipe.dest.synchronized_vblank_all_planes = synchronized_vblank;
+
+ dc_timing_to_dml_timing(timing, &pipes[pipe_cnt].pipe.dest);
+ pipes[pipe_cnt].pipe.dest.vtotal_min = res_ctx->pipe_ctx[i].stream->adjust.v_total_min;
+ pipes[pipe_cnt].pipe.dest.vtotal_max = res_ctx->pipe_ctx[i].stream->adjust.v_total_max;
+
+ pipes[pipe_cnt].pipe.dest.otg_inst = res_ctx->pipe_ctx[i].stream_res.tg->inst;
+
+ pipes[pipe_cnt].pipe.dest.odm_combine = get_dml_odm_combine(&res_ctx->pipe_ctx[i]);
+
+ populate_hsplit_group_from_dc_pipe_ctx(&res_ctx->pipe_ctx[i], &pipes[pipe_cnt]);
+
+ pipes[pipe_cnt].dout.dp_lanes = 4;
+ pipes[pipe_cnt].dout.is_virtual = 0;
+ pipes[pipe_cnt].dout.output_type = get_dml_output_type(res_ctx->pipe_ctx[i].stream->signal);
+ if (pipes[pipe_cnt].dout.output_type < 0) {
+ pipes[pipe_cnt].dout.output_type = dm_dp;
+ pipes[pipe_cnt].dout.is_virtual = 1;
+ }
+
+ populate_color_depth_and_encoding_from_timing(&res_ctx->pipe_ctx[i].stream->timing, &pipes[pipe_cnt].dout);
+
+ if (res_ctx->pipe_ctx[i].stream->timing.flags.DSC)
+ pipes[pipe_cnt].dout.output_bpp = res_ctx->pipe_ctx[i].stream->timing.dsc_cfg.bits_per_pixel / 16.0;
+
+ /* todo: default max for now, until there is logic reflecting this in dc*/
+ pipes[pipe_cnt].dout.dsc_input_bpc = 12;
+ /*fill up the audio sample rate (unit in kHz)*/
+ get_audio_check(&res_ctx->pipe_ctx[i].stream->audio_info, &aud_check);
+ pipes[pipe_cnt].dout.max_audio_sample_rate = aud_check.max_audiosample_rate / 1000;
+
+ populate_dml_cursor_parameters_from_dc_pipe_ctx(&res_ctx->pipe_ctx[i], &pipes[pipe_cnt]);
+
+ if (!res_ctx->pipe_ctx[i].plane_state) {
+ populate_default_plane_from_timing(timing, &pipes[pipe_cnt].pipe);
+ } else {
+ populate_dml_from_dc_pipe_ctx(&res_ctx->pipe_ctx[i], &pipes[pipe_cnt], dc->debug.always_scale);
+ }
+
+ pipe_cnt++;
+ }
+
+ /* populate writeback information */
+ if (dc->res_pool)
+ dc->res_pool->funcs->populate_dml_writeback_from_context(dc, res_ctx, pipes);
+
+ return pipe_cnt;
+}
+
+static int dml_populate_dml_pipes_from_context(
+ struct dc *dc, struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ bool fast_validate)
+{
+ int i, pipe_cnt;
+ struct resource_context *res_ctx = &context->res_ctx;
+ struct pipe_ctx *pipe;
+
+ populate_dml_pipes_from_context_base(dc, context, pipes, fast_validate);
+
+ for (i = 0, pipe_cnt = 0; i < dc->res_pool->pipe_count; i++) {
+ struct dc_crtc_timing *timing;
+
+ if (!res_ctx->pipe_ctx[i].stream)
+ continue;
+ pipe = &res_ctx->pipe_ctx[i];
+ timing = &pipe->stream->timing;
+
+ pipes[pipe_cnt].pipe.src.gpuvm = true;
+ pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0;
+ pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0;
+ pipes[pipe_cnt].pipe.dest.vfront_porch = timing->v_front_porch;
+
+ pipes[pipe_cnt].dout.dsc_input_bpc = 0;
+ if (pipes[pipe_cnt].dout.dsc_enable) {
+ switch (timing->display_color_depth) {
+ case COLOR_DEPTH_888:
+ pipes[pipe_cnt].dout.dsc_input_bpc = 8;
+ break;
+ case COLOR_DEPTH_101010:
+ pipes[pipe_cnt].dout.dsc_input_bpc = 10;
+ break;
+ case COLOR_DEPTH_121212:
+ pipes[pipe_cnt].dout.dsc_input_bpc = 12;
+ break;
+ default:
+ ASSERT(0);
+ break;
+ }
+ }
+ pipe_cnt++;
+ }
+ dc->config.enable_4to1MPC = false;
+ if (pipe_cnt == 1 && pipe->plane_state && !dc->debug.disable_z9_mpc) {
+ if (is_dual_plane(pipe->plane_state->format)
+ && pipe->plane_state->src_rect.width <= 1920 && pipe->plane_state->src_rect.height <= 1080) {
+ dc->config.enable_4to1MPC = true;
+ } else if (!is_dual_plane(pipe->plane_state->format)) {
+ context->bw_ctx.dml.ip.det_buffer_size_kbytes = 192;
+ pipes[0].pipe.src.unbounded_req_mode = true;
+ }
+ }
+
+ return pipe_cnt;
+}
+
+static void dml_full_validate_bw_helper(struct dc *dc,
+ struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ int *vlevel,
+ int *split,
+ bool *merge,
+ int *pipe_cnt)
+{
+ struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
+
+ /*
+ * DML favors voltage over p-state, but we're more interested in
+ * supporting p-state over voltage. We can't support p-state in
+ * prefetch mode > 0 so try capping the prefetch mode to start.
+ */
+ context->bw_ctx.dml.soc.allow_dram_self_refresh_or_dram_clock_change_in_vblank =
+ dm_allow_self_refresh_and_mclk_switch;
+ *vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
+ /* This may adjust vlevel and maxMpcComb */
+ if (*vlevel < context->bw_ctx.dml.soc.num_states)
+ *vlevel = dml_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge);
+
+ /* Conditions for setting up phantom pipes for SubVP:
+ * 1. Not force disable SubVP
+ * 2. Full update (i.e. !fast_validate)
+ * 3. Enough pipes are available to support SubVP (TODO: Which pipes will use VACTIVE / VBLANK / SUBVP?)
+ * 4. Display configuration passes validation
+ * 5. (Config doesn't support MCLK in VACTIVE/VBLANK || dc->debug.force_subvp_mclk_switch)
+ */
+ if (!dc->debug.force_disable_subvp &&
+ dml_enough_pipes_for_subvp(dc, context) &&
+ *vlevel < context->bw_ctx.dml.soc.num_states &&
+ (vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported ||
+ dc->debug.force_subvp_mclk_switch)) {
+
+ dml_add_phantom_pipes(dc, context);
+
+ /* Create input to DML based on new context which includes phantom pipes
+ * TODO: Input to DML should mark which pipes are phantom
+ */
+ *pipe_cnt = dml_populate_dml_pipes_from_context(dc, context, pipes, false);
+ *vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt);
+ if (*vlevel < context->bw_ctx.dml.soc.num_states) {
+ memset(split, 0, sizeof(split));
+ memset(merge, 0, sizeof(merge));
+ *vlevel = dml_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge);
+ }
+
+ // If SubVP pipe config is unsupported (or cannot be used for UCLK switching)
+ // remove phantom pipes and repopulate dml pipes
+ if (*vlevel == context->bw_ctx.dml.soc.num_states ||
+ vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported) {
+ dml_remove_phantom_pipes(dc, context);
+ *pipe_cnt = dml_populate_dml_pipes_from_context(dc, context, pipes, false);
+ }
+ }
+}
+
+static void dcn20_adjust_adaptive_sync_v_startup(
+ const struct dc_crtc_timing *dc_crtc_timing, int *vstartup_start)
+{
+ struct dc_crtc_timing patched_crtc_timing;
+ uint32_t asic_blank_end = 0;
+ uint32_t asic_blank_start = 0;
+ uint32_t newVstartup = 0;
+
+ patched_crtc_timing = *dc_crtc_timing;
+
+ if (patched_crtc_timing.flags.INTERLACE == 1) {
+ if (patched_crtc_timing.v_front_porch < 2)
+ patched_crtc_timing.v_front_porch = 2;
+ } else {
+ if (patched_crtc_timing.v_front_porch < 1)
+ patched_crtc_timing.v_front_porch = 1;
+ }
+
+ /* blank_start = frame end - front porch */
+ asic_blank_start = patched_crtc_timing.v_total -
+ patched_crtc_timing.v_front_porch;
+
+ /* blank_end = blank_start - active */
+ asic_blank_end = asic_blank_start -
+ patched_crtc_timing.v_border_bottom -
+ patched_crtc_timing.v_addressable -
+ patched_crtc_timing.v_border_top;
+
+ newVstartup = asic_blank_end + (patched_crtc_timing.v_total - asic_blank_start);
+
+ *vstartup_start = ((newVstartup > *vstartup_start) ? newVstartup : *vstartup_start);
+}
+
+static bool is_dp_128b_132b_signal(struct pipe_ctx *pipe_ctx)
+{
+ return (pipe_ctx->stream_res.hpo_dp_stream_enc &&
+ pipe_ctx->stream->link->hpo_dp_link_enc &&
+ dc_is_dp_signal(pipe_ctx->stream->signal));
+}
+
+static bool is_dtbclk_required(struct dc *dc, struct dc_state *context)
+{
+ int i;
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ if (!context->res_ctx.pipe_ctx[i].stream)
+ continue;
+#if defined (CONFIG_DRM_AMD_DC_DP2_0)
+ if (is_dp_128b_132b_signal(&context->res_ctx.pipe_ctx[i]))
+ return true;
+#endif
+ }
+ return false;
+}
+
+static void dml_update_soc_for_wm_a(struct dc *dc, struct dc_state *context)
+{
+ if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].valid) {
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
+ context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.sr_enter_plus_exit_time_us;
+ context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.sr_exit_time_us;
+ }
+}
+
+static bool dml_internal_validate(
+ struct dc *dc,
+ struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ int *pipe_cnt_out,
+ int *vlevel_out,
+ bool fast_validate)
+{
+ bool out = false;
+ bool repopulate_pipes = false;
+ int split[MAX_PIPES] = { 0 };
+ bool merge[MAX_PIPES] = { false };
+ bool newly_split[MAX_PIPES] = { false };
+ int pipe_cnt, i, pipe_idx, vlevel;
+ struct vba_vars_st *vba = &context->bw_ctx.dml.vba;
+
+ ASSERT(pipes);
+ if (!pipes)
+ return false;
+
+ // For each full update, remove all existing phantom pipes first
+ dml_remove_phantom_pipes(dc, context);
+
+ dml_update_soc_for_wm_a(dc, context);
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe->plane_state) {
+ // On initial pass through DML, we intend to use MALL for SS on all
+ // (non-PSR) surfaces with none using MALL for P-State
+ // 'mall_plane_config': is not a member of 'dc_plane_state' - commenting it out till mall_plane_config gets supported in dc_plant_state
+ //if (pipe->stream && pipe->stream->link->psr_settings.psr_version == DC_PSR_VERSION_UNSUPPORTED)
+ // pipe->plane_state->mall_plane_config.use_mall_for_ss = true;
+ }
+ }
+ pipe_cnt = dml_populate_dml_pipes_from_context(dc, context, pipes, fast_validate);
+
+ if (!pipe_cnt) {
+ out = true;
+ goto validate_out;
+ }
+
+ dml_log_pipe_params(&context->bw_ctx.dml, pipes, pipe_cnt);
+
+ if (!fast_validate) {
+ dml_full_validate_bw_helper(dc, context, pipes, &vlevel, split, merge, &pipe_cnt);
+ }
+
+ if (fast_validate || vlevel == context->bw_ctx.dml.soc.num_states ||
+ vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported) {
+ /*
+ * If mode is unsupported or there's still no p-state support then
+ * fall back to favoring voltage.
+ *
+ * We don't actually support prefetch mode 2, so require that we
+ * at least support prefetch mode 1.
+ */
+ context->bw_ctx.dml.soc.allow_dram_self_refresh_or_dram_clock_change_in_vblank =
+ dm_allow_self_refresh;
+
+ vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt);
+ if (vlevel < context->bw_ctx.dml.soc.num_states) {
+ memset(split, 0, sizeof(split));
+ memset(merge, 0, sizeof(merge));
+ vlevel = dml_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge);
+ }
+ }
+
+ dml_log_mode_support_params(&context->bw_ctx.dml);
+
+ if (vlevel == context->bw_ctx.dml.soc.num_states)
+ goto validate_fail;
+
+ for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ struct pipe_ctx *mpo_pipe = pipe->bottom_pipe;
+
+ if (!pipe->stream)
+ continue;
+
+ /* We only support full screen mpo with ODM */
+ if (vba->ODMCombineEnabled[vba->pipe_plane[pipe_idx]] != dm_odm_combine_mode_disabled
+ && pipe->plane_state && mpo_pipe
+ && memcmp(&mpo_pipe->plane_res.scl_data.recout,
+ &pipe->plane_res.scl_data.recout,
+ sizeof(struct rect)) != 0) {
+ ASSERT(mpo_pipe->plane_state != pipe->plane_state);
+ goto validate_fail;
+ }
+ pipe_idx++;
+ }
+
+ /* merge pipes if necessary */
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ /*skip pipes that don't need merging*/
+ if (!merge[i])
+ continue;
+
+ /* if ODM merge we ignore mpc tree, mpo pipes will have their own flags */
+ if (pipe->prev_odm_pipe) {
+ /*split off odm pipe*/
+ pipe->prev_odm_pipe->next_odm_pipe = pipe->next_odm_pipe;
+ if (pipe->next_odm_pipe)
+ pipe->next_odm_pipe->prev_odm_pipe = pipe->prev_odm_pipe;
+
+ pipe->bottom_pipe = NULL;
+ pipe->next_odm_pipe = NULL;
+ pipe->plane_state = NULL;
+ pipe->stream = NULL;
+ pipe->top_pipe = NULL;
+ pipe->prev_odm_pipe = NULL;
+ if (pipe->stream_res.dsc)
+ dml_release_dsc(&context->res_ctx, dc->res_pool, &pipe->stream_res.dsc);
+ memset(&pipe->plane_res, 0, sizeof(pipe->plane_res));
+ memset(&pipe->stream_res, 0, sizeof(pipe->stream_res));
+ repopulate_pipes = true;
+ } else if (pipe->top_pipe && pipe->top_pipe->plane_state == pipe->plane_state) {
+ struct pipe_ctx *top_pipe = pipe->top_pipe;
+ struct pipe_ctx *bottom_pipe = pipe->bottom_pipe;
+
+ top_pipe->bottom_pipe = bottom_pipe;
+ if (bottom_pipe)
+ bottom_pipe->top_pipe = top_pipe;
+
+ pipe->top_pipe = NULL;
+ pipe->bottom_pipe = NULL;
+ pipe->plane_state = NULL;
+ pipe->stream = NULL;
+ memset(&pipe->plane_res, 0, sizeof(pipe->plane_res));
+ memset(&pipe->stream_res, 0, sizeof(pipe->stream_res));
+ repopulate_pipes = true;
+ } else
+ ASSERT(0); /* Should never try to merge master pipe */
+
+ }
+
+ for (i = 0, pipe_idx = -1; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ struct pipe_ctx *old_pipe = &dc->current_state->res_ctx.pipe_ctx[i];
+ struct pipe_ctx *hsplit_pipe = NULL;
+ bool odm;
+ int old_index = -1;
+
+ if (!pipe->stream || newly_split[i])
+ continue;
+
+ pipe_idx++;
+ odm = vba->ODMCombineEnabled[vba->pipe_plane[pipe_idx]] != dm_odm_combine_mode_disabled;
+
+ if (!pipe->plane_state && !odm)
+ continue;
+
+ if (split[i]) {
+ if (odm) {
+ if (split[i] == 4 && old_pipe->next_odm_pipe && old_pipe->next_odm_pipe->next_odm_pipe)
+ old_index = old_pipe->next_odm_pipe->next_odm_pipe->pipe_idx;
+ else if (old_pipe->next_odm_pipe)
+ old_index = old_pipe->next_odm_pipe->pipe_idx;
+ } else {
+ if (split[i] == 4 && old_pipe->bottom_pipe && old_pipe->bottom_pipe->bottom_pipe &&
+ old_pipe->bottom_pipe->bottom_pipe->plane_state == old_pipe->plane_state)
+ old_index = old_pipe->bottom_pipe->bottom_pipe->pipe_idx;
+ else if (old_pipe->bottom_pipe &&
+ old_pipe->bottom_pipe->plane_state == old_pipe->plane_state)
+ old_index = old_pipe->bottom_pipe->pipe_idx;
+ }
+ hsplit_pipe = dml_find_split_pipe(dc, context, old_index);
+ ASSERT(hsplit_pipe);
+ if (!hsplit_pipe)
+ goto validate_fail;
+
+ if (!dml_split_stream_for_mpc_or_odm(
+ dc, &context->res_ctx,
+ pipe, hsplit_pipe, odm))
+ goto validate_fail;
+
+ newly_split[hsplit_pipe->pipe_idx] = true;
+ repopulate_pipes = true;
+ }
+ if (split[i] == 4) {
+ struct pipe_ctx *pipe_4to1;
+
+ if (odm && old_pipe->next_odm_pipe)
+ old_index = old_pipe->next_odm_pipe->pipe_idx;
+ else if (!odm && old_pipe->bottom_pipe &&
+ old_pipe->bottom_pipe->plane_state == old_pipe->plane_state)
+ old_index = old_pipe->bottom_pipe->pipe_idx;
+ else
+ old_index = -1;
+ pipe_4to1 = dml_find_split_pipe(dc, context, old_index);
+ ASSERT(pipe_4to1);
+ if (!pipe_4to1)
+ goto validate_fail;
+ if (!dml_split_stream_for_mpc_or_odm(
+ dc, &context->res_ctx,
+ pipe, pipe_4to1, odm))
+ goto validate_fail;
+ newly_split[pipe_4to1->pipe_idx] = true;
+
+ if (odm && old_pipe->next_odm_pipe && old_pipe->next_odm_pipe->next_odm_pipe
+ && old_pipe->next_odm_pipe->next_odm_pipe->next_odm_pipe)
+ old_index = old_pipe->next_odm_pipe->next_odm_pipe->next_odm_pipe->pipe_idx;
+ else if (!odm && old_pipe->bottom_pipe && old_pipe->bottom_pipe->bottom_pipe &&
+ old_pipe->bottom_pipe->bottom_pipe->bottom_pipe &&
+ old_pipe->bottom_pipe->bottom_pipe->bottom_pipe->plane_state == old_pipe->plane_state)
+ old_index = old_pipe->bottom_pipe->bottom_pipe->bottom_pipe->pipe_idx;
+ else
+ old_index = -1;
+ pipe_4to1 = dml_find_split_pipe(dc, context, old_index);
+ ASSERT(pipe_4to1);
+ if (!pipe_4to1)
+ goto validate_fail;
+ if (!dml_split_stream_for_mpc_or_odm(
+ dc, &context->res_ctx,
+ hsplit_pipe, pipe_4to1, odm))
+ goto validate_fail;
+ newly_split[pipe_4to1->pipe_idx] = true;
+ }
+ if (odm)
+ dml_build_mapped_resource(dc, context, pipe->stream);
+ }
+
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+
+ if (pipe->plane_state) {
+ if (!resource_build_scaling_params(pipe))
+ goto validate_fail;
+ }
+ }
+
+ /* Actual dsc count per stream dsc validation*/
+ if (!dml_validate_dsc(dc, context)) {
+ vba->ValidationStatus[vba->soc.num_states] = DML_FAIL_DSC_VALIDATION_FAILURE;
+ goto validate_fail;
+ }
+
+ if (repopulate_pipes)
+ pipe_cnt = dml_populate_dml_pipes_from_context(dc, context, pipes, fast_validate);
+ *vlevel_out = vlevel;
+ *pipe_cnt_out = pipe_cnt;
+
+ out = true;
+ goto validate_out;
+
+validate_fail:
+ out = false;
+
+validate_out:
+ return out;
+}
+
+static void dml_calculate_dlg_params(
+ struct dc *dc, struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ int pipe_cnt,
+ int vlevel)
+{
+ int i, pipe_idx;
+ int plane_count;
+
+ /* Writeback MCIF_WB arbitration parameters */
+ if (dc->res_pool)
+ dc->res_pool->funcs->set_mcif_arb_params(dc, context, pipes, pipe_cnt);
+
+ context->bw_ctx.bw.dcn.clk.dispclk_khz = context->bw_ctx.dml.vba.DISPCLK * 1000;
+ context->bw_ctx.bw.dcn.clk.dcfclk_khz = context->bw_ctx.dml.vba.DCFCLK * 1000;
+ context->bw_ctx.bw.dcn.clk.socclk_khz = context->bw_ctx.dml.vba.SOCCLK * 1000;
+ context->bw_ctx.bw.dcn.clk.dramclk_khz = context->bw_ctx.dml.vba.DRAMSpeed * 1000 / 16;
+ context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = context->bw_ctx.dml.vba.DCFCLKDeepSleep * 1000;
+ context->bw_ctx.bw.dcn.clk.fclk_khz = context->bw_ctx.dml.vba.FabricClock * 1000;
+ context->bw_ctx.bw.dcn.clk.p_state_change_support =
+ context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb]
+ != dm_dram_clock_change_unsupported;
+
+ context->bw_ctx.bw.dcn.clk.dppclk_khz = 0;
+ /* 'z9_support': is not a member of 'dc_clocks' - Commenting out till we have this support in dc_clocks
+ * context->bw_ctx.bw.dcn.clk.z9_support = (context->bw_ctx.dml.vba.StutterPeriod > 5000.0) ?
+ DCN_Z9_SUPPORT_ALLOW : DCN_Z9_SUPPORT_DISALLOW;
+ */
+ plane_count = 0;
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ if (context->res_ctx.pipe_ctx[i].plane_state)
+ plane_count++;
+ }
+
+ /* Commented out as per above error for now.
+ if (plane_count == 0)
+ context->bw_ctx.bw.dcn.clk.z9_support = DCN_Z9_SUPPORT_ALLOW;
+ */
+ context->bw_ctx.bw.dcn.clk.dtbclk_en = is_dtbclk_required(dc, context);
+ /* TODO : Uncomment the below line and make changes
+ * as per DML nomenclature once it is available.
+ * context->bw_ctx.bw.dcn.clk.fclk_p_state_change_support = context->bw_ctx.dml.vba.fclk_pstate_support;
+ */
+
+ if (context->bw_ctx.bw.dcn.clk.dispclk_khz < dc->debug.min_disp_clk_khz)
+ context->bw_ctx.bw.dcn.clk.dispclk_khz = dc->debug.min_disp_clk_khz;
+
+ for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+ if (!context->res_ctx.pipe_ctx[i].stream)
+ continue;
+ pipes[pipe_idx].pipe.dest.vstartup_start = get_vstartup(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+ pipes[pipe_idx].pipe.dest.vupdate_offset = get_vupdate_offset(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+ pipes[pipe_idx].pipe.dest.vupdate_width = get_vupdate_width(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+ pipes[pipe_idx].pipe.dest.vready_offset = get_vready_offset(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+ if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
+ // Phantom pipe requires that DET_SIZE = 0 and no unbounded requests
+ context->res_ctx.pipe_ctx[i].det_buffer_size_kb = 0;
+ context->res_ctx.pipe_ctx[i].unbounded_req = false;
+ } else {
+ context->res_ctx.pipe_ctx[i].det_buffer_size_kb = context->bw_ctx.dml.ip.det_buffer_size_kbytes;
+ context->res_ctx.pipe_ctx[i].unbounded_req = pipes[pipe_idx].pipe.src.unbounded_req_mode;
+ }
+
+ if (context->bw_ctx.bw.dcn.clk.dppclk_khz < pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000)
+ context->bw_ctx.bw.dcn.clk.dppclk_khz = pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000;
+ context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz =
+ pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000;
+ context->res_ctx.pipe_ctx[i].pipe_dlg_param = pipes[pipe_idx].pipe.dest;
+ pipe_idx++;
+ }
+ /*save a original dppclock copy*/
+ context->bw_ctx.bw.dcn.clk.bw_dppclk_khz = context->bw_ctx.bw.dcn.clk.dppclk_khz;
+ context->bw_ctx.bw.dcn.clk.bw_dispclk_khz = context->bw_ctx.bw.dcn.clk.dispclk_khz;
+ context->bw_ctx.bw.dcn.clk.max_supported_dppclk_khz = context->bw_ctx.dml.soc.clock_limits[vlevel].dppclk_mhz * 1000;
+ context->bw_ctx.bw.dcn.clk.max_supported_dispclk_khz = context->bw_ctx.dml.soc.clock_limits[vlevel].dispclk_mhz * 1000;
+ context->bw_ctx.bw.dcn.compbuf_size_kb = context->bw_ctx.dml.ip.config_return_buffer_size_in_kbytes
+ - context->bw_ctx.dml.ip.det_buffer_size_kbytes * pipe_idx;
+
+ for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+ bool cstate_en = context->bw_ctx.dml.vba.PrefetchMode[vlevel][context->bw_ctx.dml.vba.maxMpcComb] != 2;
+
+ if (!context->res_ctx.pipe_ctx[i].stream)
+ continue;
+
+ context->bw_ctx.dml.funcs.rq_dlg_get_dlg_reg(&context->bw_ctx.dml,
+ &context->res_ctx.pipe_ctx[i].dlg_regs,
+ &context->res_ctx.pipe_ctx[i].ttu_regs,
+ pipes,
+ pipe_cnt,
+ pipe_idx,
+ cstate_en,
+ context->bw_ctx.bw.dcn.clk.p_state_change_support,
+ false, false, true);
+
+ context->bw_ctx.dml.funcs.rq_dlg_get_rq_reg(&context->bw_ctx.dml,
+ &context->res_ctx.pipe_ctx[i].rq_regs,
+ &pipes[pipe_idx].pipe);
+ pipe_idx++;
+ }
+}
+
+static void dml_calculate_wm_and_dlg(
+ struct dc *dc, struct dc_state *context,
+ display_e2e_pipe_params_st *pipes,
+ int pipe_cnt,
+ int vlevel)
+{
+ int i, pipe_idx, vlevel_temp = 0;
+
+ double dcfclk = context->bw_ctx.dml.soc.clock_limits[0].dcfclk_mhz;
+ double dcfclk_from_validation = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb];
+ unsigned int min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed;
+ bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] !=
+ dm_dram_clock_change_unsupported;
+
+ /* Set B:
+ * For Set B calculations use clocks from clock_limits[2] when available i.e. when SMU is present,
+ * otherwise use arbitrary low value from spreadsheet for DCFCLK as lower is safer for watermark
+ * calculations to cover bootup clocks.
+ * DCFCLK: soc.clock_limits[2] when available
+ * UCLK: soc.clock_limits[2] when available
+ */
+ if (context->bw_ctx.dml.soc.num_states > 2) {
+ vlevel_temp = 2;
+ dcfclk = context->bw_ctx.dml.soc.clock_limits[2].dcfclk_mhz;
+ } else
+ dcfclk = 615; //DCFCLK Vmin_lv
+
+ pipes[0].clks_cfg.voltage = vlevel_temp;
+ pipes[0].clks_cfg.dcfclk_mhz = dcfclk;
+ pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel_temp].socclk_mhz;
+
+ if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].valid) {
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].dml_input.pstate_latency_us;
+ context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].dml_input.sr_enter_plus_exit_time_us;
+ context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_B].dml_input.sr_exit_time_us;
+ }
+ context->bw_ctx.bw.dcn.watermarks.b.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.b.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ //context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.fclk_pstate_change_ns = get_wm_fclk_pstate(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ //context->bw_ctx.bw.dcn.watermarks.b.usr_retraining_ns = get_wm_usr_retraining(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+
+ /* Temporary, to have some fclk_pstate_change_ns and usr_retraining_ns wm values until DML is implemented */
+ context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.fclk_pstate_change_ns = context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.pstate_change_ns / 4;
+ context->bw_ctx.bw.dcn.watermarks.b.usr_retraining_ns = context->bw_ctx.bw.dcn.watermarks.b.cstate_pstate.pstate_change_ns / 8;
+
+ /* Set D:
+ * All clocks min.
+ * DCFCLK: Min, as reported by PM FW when available
+ * UCLK : Min, as reported by PM FW when available
+ * sr_enter_exit/sr_exit should be lower than used for DRAM (TBD after bringup or later, use as decided in Clk Mgr)
+ */
+
+ if (context->bw_ctx.dml.soc.num_states > 2) {
+ vlevel_temp = 0;
+ dcfclk = dc->clk_mgr->bw_params->clk_table.entries[0].dcfclk_mhz;
+ } else
+ dcfclk = 615; //DCFCLK Vmin_lv
+
+ pipes[0].clks_cfg.voltage = vlevel_temp;
+ pipes[0].clks_cfg.dcfclk_mhz = dcfclk;
+ pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel_temp].socclk_mhz;
+
+ if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].valid) {
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].dml_input.pstate_latency_us;
+ context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].dml_input.sr_enter_plus_exit_time_us;
+ context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_D].dml_input.sr_exit_time_us;
+ }
+ context->bw_ctx.bw.dcn.watermarks.d.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.d.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ //context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.fclk_pstate_change_ns = get_wm_fclk_pstate(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ //context->bw_ctx.bw.dcn.watermarks.d.usr_retraining_ns = get_wm_usr_retraining(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+
+ /* Temporary, to have some fclk_pstate_change_ns and usr_retraining_ns wm values until DML is implemented */
+ context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.fclk_pstate_change_ns = context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.pstate_change_ns / 4;
+ context->bw_ctx.bw.dcn.watermarks.d.usr_retraining_ns = context->bw_ctx.bw.dcn.watermarks.d.cstate_pstate.pstate_change_ns / 8;
+
+ /* Set C, for Dummy P-State:
+ * All clocks min.
+ * DCFCLK: Min, as reported by PM FW, when available
+ * UCLK : Min, as reported by PM FW, when available
+ * pstate latency as per UCLK state dummy pstate latency
+ */
+ if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid) {
+ unsigned int min_dram_speed_mts_margin = 160;
+
+ if ((!pstate_en))
+ min_dram_speed_mts = dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz * 16;
+
+ /* find largest table entry that is lower than dram speed, but lower than DPM0 still uses DPM0 */
+ for (i = 3; i > 0; i--)
+ if (min_dram_speed_mts + min_dram_speed_mts_margin > dc->clk_mgr->bw_params->dummy_pstate_table[i].dram_speed_mts)
+ break;
+
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->dummy_pstate_table[i].dummy_pstate_latency_us;
+ context->bw_ctx.dml.soc.dummy_pstate_latency_us = dc->clk_mgr->bw_params->dummy_pstate_table[i].dummy_pstate_latency_us;
+ context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_enter_plus_exit_time_us;
+ context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].dml_input.sr_exit_time_us;
+ }
+ context->bw_ctx.bw.dcn.watermarks.c.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.c.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ //context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.fclk_pstate_change_ns = get_wm_fclk_pstate(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ //context->bw_ctx.bw.dcn.watermarks.c.usr_retraining_ns = get_wm_usr_retraining(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+
+ /* Temporary, to have some fclk_pstate_change_ns and usr_retraining_ns wm values until DML is implemented */
+ context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.fclk_pstate_change_ns = context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.pstate_change_ns / 4;
+ context->bw_ctx.bw.dcn.watermarks.c.usr_retraining_ns = context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.pstate_change_ns / 8;
+
+ if ((!pstate_en) && (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid)) {
+ /* The only difference between A and C is p-state latency, if p-state is not supported
+ * with full p-state latency we want to calculate DLG based on dummy p-state latency,
+ * Set A p-state watermark set to 0 previously, when p-state unsupported, for now keep as previous implementation.
+ */
+ context->bw_ctx.bw.dcn.watermarks.a = context->bw_ctx.bw.dcn.watermarks.c;
+ context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns = 0;
+ } else {
+ /* Set A:
+ * All clocks min.
+ * DCFCLK: Min, as reported by PM FW, when available
+ * UCLK: Min, as reported by PM FW, when available
+ */
+ dml_update_soc_for_wm_a(dc, context);
+ context->bw_ctx.bw.dcn.watermarks.a.urgent_ns = get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_ns = get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_ns = get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.pte_meta_urgent_ns = get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ context->bw_ctx.bw.dcn.watermarks.a.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000;
+ }
+
+ pipes[0].clks_cfg.voltage = vlevel;
+ pipes[0].clks_cfg.dcfclk_mhz = dcfclk_from_validation;
+ pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz;
+
+ for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
+ if (!context->res_ctx.pipe_ctx[i].stream)
+ continue;
+
+ pipes[pipe_idx].clks_cfg.dispclk_mhz = get_dispclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt);
+ pipes[pipe_idx].clks_cfg.dppclk_mhz = get_dppclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx);
+
+ if (dc->config.forced_clocks) {
+ pipes[pipe_idx].clks_cfg.dispclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dispclk_mhz;
+ pipes[pipe_idx].clks_cfg.dppclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dppclk_mhz;
+ }
+ if (dc->debug.min_disp_clk_khz > pipes[pipe_idx].clks_cfg.dispclk_mhz * 1000)
+ pipes[pipe_idx].clks_cfg.dispclk_mhz = dc->debug.min_disp_clk_khz / 1000.0;
+ if (dc->debug.min_dpp_clk_khz > pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000)
+ pipes[pipe_idx].clks_cfg.dppclk_mhz = dc->debug.min_dpp_clk_khz / 1000.0;
+
+ pipe_idx++;
+ }
+
+ context->perf_params.stutter_period_us = context->bw_ctx.dml.vba.StutterPeriod;
+
+ dml_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
+
+ if (!pstate_en)
+ /* Restore full p-state latency */
+ context->bw_ctx.dml.soc.dram_clock_change_latency_us =
+ dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us;
+}
+
+bool dml_validate(struct dc *dc,
+ struct dc_state *context,
+ bool fast_validate)
+{
+ bool out = false;
+
+ BW_VAL_TRACE_SETUP();
+
+ int vlevel = 0;
+ int pipe_cnt = 0;
+ display_e2e_pipe_params_st *pipes = context->bw_ctx.dml.dml_pipe_state;
+ DC_LOGGER_INIT(dc->ctx->logger);
+
+ BW_VAL_TRACE_COUNT();
+
+ out = dml_internal_validate(dc, context, pipes, &pipe_cnt, &vlevel, fast_validate);
+
+ if (pipe_cnt == 0)
+ goto validate_out;
+
+ if (!out)
+ goto validate_fail;
+
+ BW_VAL_TRACE_END_VOLTAGE_LEVEL();
+
+ if (fast_validate) {
+ BW_VAL_TRACE_SKIP(fast);
+ goto validate_out;
+ }
+
+ dml_calculate_wm_and_dlg(dc, context, pipes, pipe_cnt, vlevel);
+
+ BW_VAL_TRACE_END_WATERMARKS();
+
+ goto validate_out;
+
+validate_fail:
+ DC_LOG_WARNING("Mode Validation Warning: %s failed validation.\n",
+ dml_get_status_message(context->bw_ctx.dml.vba.ValidationStatus[context->bw_ctx.dml.vba.soc.num_states]));
+
+ BW_VAL_TRACE_SKIP(fail);
+ out = false;
+
+validate_out:
+ BW_VAL_TRACE_FINISH();
+
+ return out;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dml_wrapper_translation.c b/drivers/gpu/drm/amd/display/dc/dml/dml_wrapper_translation.c
new file mode 100644
index 000000000000..4ec5310a2962
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/dml/dml_wrapper_translation.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright 2017 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifdef DML_WRAPPER_TRANSLATION_
+
+static void gfx10array_mode_to_dml_params(
+ enum array_mode_values array_mode,
+ enum legacy_tiling_compat_level compat_level,
+ unsigned int *sw_mode)
+{
+ switch (array_mode) {
+ case DC_ARRAY_LINEAR_ALLIGNED:
+ case DC_ARRAY_LINEAR_GENERAL:
+ *sw_mode = dm_sw_linear;
+ break;
+ case DC_ARRAY_2D_TILED_THIN1:
+// DC_LEGACY_TILING_ADDR_GEN_ZERO - undefined as per current code hence removed
+#if 0
+ if (compat_level == DC_LEGACY_TILING_ADDR_GEN_ZERO)
+ *sw_mode = dm_sw_gfx7_2d_thin_l_vp;
+ else
+ *sw_mode = dm_sw_gfx7_2d_thin_gl;
+#endif
+ break;
+ default:
+ ASSERT(0); /* Not supported */
+ break;
+ }
+}
+
+static void swizzle_to_dml_params(
+ enum swizzle_mode_values swizzle,
+ unsigned int *sw_mode)
+{
+ switch (swizzle) {
+ case DC_SW_LINEAR:
+ *sw_mode = dm_sw_linear;
+ break;
+ case DC_SW_4KB_S:
+ *sw_mode = dm_sw_4kb_s;
+ break;
+ case DC_SW_4KB_S_X:
+ *sw_mode = dm_sw_4kb_s_x;
+ break;
+ case DC_SW_4KB_D:
+ *sw_mode = dm_sw_4kb_d;
+ break;
+ case DC_SW_4KB_D_X:
+ *sw_mode = dm_sw_4kb_d_x;
+ break;
+ case DC_SW_64KB_S:
+ *sw_mode = dm_sw_64kb_s;
+ break;
+ case DC_SW_64KB_S_X:
+ *sw_mode = dm_sw_64kb_s_x;
+ break;
+ case DC_SW_64KB_S_T:
+ *sw_mode = dm_sw_64kb_s_t;
+ break;
+ case DC_SW_64KB_D:
+ *sw_mode = dm_sw_64kb_d;
+ break;
+ case DC_SW_64KB_D_X:
+ *sw_mode = dm_sw_64kb_d_x;
+ break;
+ case DC_SW_64KB_D_T:
+ *sw_mode = dm_sw_64kb_d_t;
+ break;
+ case DC_SW_64KB_R_X:
+ *sw_mode = dm_sw_64kb_r_x;
+ break;
+ case DC_SW_VAR_S:
+ *sw_mode = dm_sw_var_s;
+ break;
+ case DC_SW_VAR_S_X:
+ *sw_mode = dm_sw_var_s_x;
+ break;
+ case DC_SW_VAR_D:
+ *sw_mode = dm_sw_var_d;
+ break;
+ case DC_SW_VAR_D_X:
+ *sw_mode = dm_sw_var_d_x;
+ break;
+
+ default:
+ ASSERT(0); /* Not supported */
+ break;
+ }
+}
+
+static void dc_timing_to_dml_timing(const struct dc_crtc_timing *timing, struct _vcs_dpi_display_pipe_dest_params_st *dest)
+{
+ dest->hblank_start = timing->h_total - timing->h_front_porch;
+ dest->hblank_end = dest->hblank_start
+ - timing->h_addressable
+ - timing->h_border_left
+ - timing->h_border_right;
+ dest->vblank_start = timing->v_total - timing->v_front_porch;
+ dest->vblank_end = dest->vblank_start
+ - timing->v_addressable
+ - timing->v_border_top
+ - timing->v_border_bottom;
+ dest->htotal = timing->h_total;
+ dest->vtotal = timing->v_total;
+ dest->hactive = timing->h_addressable;
+ dest->vactive = timing->v_addressable;
+ dest->interlaced = timing->flags.INTERLACE;
+ dest->pixel_rate_mhz = timing->pix_clk_100hz/10000.0;
+ if (timing->timing_3d_format == TIMING_3D_FORMAT_HW_FRAME_PACKING)
+ dest->pixel_rate_mhz *= 2;
+}
+
+static enum odm_combine_mode get_dml_odm_combine(const struct pipe_ctx *pipe)
+{
+ int odm_split_count = 0;
+ enum odm_combine_mode combine_mode = dm_odm_combine_mode_disabled;
+ struct pipe_ctx *next_pipe = pipe->next_odm_pipe;
+
+ // Traverse pipe tree to determine odm split count
+ while (next_pipe) {
+ odm_split_count++;
+ next_pipe = next_pipe->next_odm_pipe;
+ }
+ pipe = pipe->prev_odm_pipe;
+ while (pipe) {
+ odm_split_count++;
+ pipe = pipe->prev_odm_pipe;
+ }
+
+ // Translate split to DML odm combine factor
+ switch (odm_split_count) {
+ case 1:
+ combine_mode = dm_odm_combine_mode_2to1;
+ break;
+ case 3:
+ combine_mode = dm_odm_combine_mode_4to1;
+ break;
+ default:
+ combine_mode = dm_odm_combine_mode_disabled;
+ }
+
+ return combine_mode;
+}
+
+static int get_dml_output_type(enum signal_type dc_signal)
+{
+ int dml_output_type = -1;
+
+ switch (dc_signal) {
+ case SIGNAL_TYPE_DISPLAY_PORT_MST:
+ case SIGNAL_TYPE_DISPLAY_PORT:
+ dml_output_type = dm_dp;
+ break;
+ case SIGNAL_TYPE_EDP:
+ dml_output_type = dm_edp;
+ break;
+ case SIGNAL_TYPE_HDMI_TYPE_A:
+ case SIGNAL_TYPE_DVI_SINGLE_LINK:
+ case SIGNAL_TYPE_DVI_DUAL_LINK:
+ dml_output_type = dm_hdmi;
+ break;
+ default:
+ break;
+ }
+
+ return dml_output_type;
+}
+
+static void populate_color_depth_and_encoding_from_timing(const struct dc_crtc_timing *timing, struct _vcs_dpi_display_output_params_st *dout)
+{
+ int output_bpc = 0;
+
+ switch (timing->display_color_depth) {
+ case COLOR_DEPTH_666:
+ output_bpc = 6;
+ break;
+ case COLOR_DEPTH_888:
+ output_bpc = 8;
+ break;
+ case COLOR_DEPTH_101010:
+ output_bpc = 10;
+ break;
+ case COLOR_DEPTH_121212:
+ output_bpc = 12;
+ break;
+ case COLOR_DEPTH_141414:
+ output_bpc = 14;
+ break;
+ case COLOR_DEPTH_161616:
+ output_bpc = 16;
+ break;
+ case COLOR_DEPTH_999:
+ output_bpc = 9;
+ break;
+ case COLOR_DEPTH_111111:
+ output_bpc = 11;
+ break;
+ default:
+ output_bpc = 8;
+ break;
+ }
+
+ switch (timing->pixel_encoding) {
+ case PIXEL_ENCODING_RGB:
+ case PIXEL_ENCODING_YCBCR444:
+ dout->output_format = dm_444;
+ dout->output_bpp = output_bpc * 3;
+ break;
+ case PIXEL_ENCODING_YCBCR420:
+ dout->output_format = dm_420;
+ dout->output_bpp = (output_bpc * 3.0) / 2;
+ break;
+ case PIXEL_ENCODING_YCBCR422:
+ if (timing->flags.DSC && !timing->dsc_cfg.ycbcr422_simple)
+ dout->output_format = dm_n422;
+ else
+ dout->output_format = dm_s422;
+ dout->output_bpp = output_bpc * 2;
+ break;
+ default:
+ dout->output_format = dm_444;
+ dout->output_bpp = output_bpc * 3;
+ }
+}
+
+static enum source_format_class dc_source_format_to_dml_source_format(enum surface_pixel_format dc_format)
+{
+ enum source_format_class dml_format = dm_444_32;
+
+ switch (dc_format) {
+ case SURFACE_PIXEL_FORMAT_VIDEO_420_YCbCr:
+ case SURFACE_PIXEL_FORMAT_VIDEO_420_YCrCb:
+ dml_format = dm_420_8;
+ break;
+ case SURFACE_PIXEL_FORMAT_VIDEO_420_10bpc_YCbCr:
+ case SURFACE_PIXEL_FORMAT_VIDEO_420_10bpc_YCrCb:
+ dml_format = dm_420_10;
+ break;
+ case SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616:
+ case SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616F:
+ case SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616F:
+ dml_format = dm_444_64;
+ break;
+ case SURFACE_PIXEL_FORMAT_GRPH_ARGB1555:
+ case SURFACE_PIXEL_FORMAT_GRPH_RGB565:
+ dml_format = dm_444_16;
+ break;
+ case SURFACE_PIXEL_FORMAT_GRPH_PALETA_256_COLORS:
+ dml_format = dm_444_8;
+ break;
+ case SURFACE_PIXEL_FORMAT_GRPH_RGBE_ALPHA:
+ dml_format = dm_rgbe_alpha;
+ break;
+ default:
+ dml_format = dm_444_32;
+ break;
+ }
+
+ return dml_format;
+}
+
+#endif
diff --git a/drivers/gpu/drm/amd/display/dc/inc/dml_wrapper.h b/drivers/gpu/drm/amd/display/dc/inc/dml_wrapper.h
new file mode 100644
index 000000000000..5dcfbd8e2697
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/dc/inc/dml_wrapper.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2015 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef DML_WRAPPER_H_
+#define DML_WRAPPER_H_
+
+#include "dc.h"
+#include "dml/display_mode_vba.h"
+
+bool dml_validate(struct dc *dc, struct dc_state *context, bool fast_validate);
+
+#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 06/14] drm/amd/display: Reset fifo after enable otg
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (4 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 05/14] drm/amd/display: Code change for DML isolation Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 07/14] drm/amd/display: Enable DSC over eDP Wayne Lin
` (8 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Jun Lei, Anthony Koo, Sunpeng.Li, Harry.Wentland,
qingqing.zhuo, Xu, Jinze, Rodrigo.Siqueira, roman.li,
solomon.chiu, Aurabindo.Pillai, wayne.lin, mikita.lipski,
Bhawanpreet.Lakha, agustin.gutierrez, pavle.kotarac
From: "Xu, Jinze" <JinZe.Xu@amd.com>
[Why]
In fast boot sequence, when change dispclk, otg is disabled but digfe
is enabled. This may cause dig fifo error.
[How]
Reset dig fifo after enable otg.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
---
.../amd/display/dc/dce110/dce110_hw_sequencer.c | 5 +++++
.../amd/display/dc/dcn10/dcn10_stream_encoder.c | 15 +++++++++++++++
.../amd/display/dc/dcn10/dcn10_stream_encoder.h | 3 +++
.../amd/display/dc/dcn20/dcn20_stream_encoder.c | 2 ++
.../display/dc/dcn30/dcn30_dio_stream_encoder.c | 2 ++
.../drm/amd/display/dc/inc/hw/stream_encoder.h | 4 ++++
6 files changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index e7e2aa46218d..665cf58b0724 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1602,6 +1602,11 @@ static enum dc_status apply_single_controller_ctx_to_hw(
pipe_ctx->stream_res.stream_enc,
pipe_ctx->stream_res.tg->inst);
+ if (dc_is_dp_signal(pipe_ctx->stream->signal) &&
+ pipe_ctx->stream_res.stream_enc->funcs->reset_fifo)
+ pipe_ctx->stream_res.stream_enc->funcs->reset_fifo(
+ pipe_ctx->stream_res.stream_enc);
+
if (dc_is_dp_signal(pipe_ctx->stream->signal))
dp_source_sequence_trace(link, DPCD_SOURCE_SEQ_AFTER_CONNECT_DIG_FE_OTG);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
index b0c08ee6bc2c..bf4436d7aaab 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
@@ -902,6 +902,19 @@ void enc1_stream_encoder_stop_dp_info_packets(
}
+void enc1_stream_encoder_reset_fifo(
+ struct stream_encoder *enc)
+{
+ struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc);
+
+ /* set DIG_START to 0x1 to reset FIFO */
+ REG_UPDATE(DIG_FE_CNTL, DIG_START, 1);
+ udelay(100);
+
+ /* write 0 to take the FIFO out of reset */
+ REG_UPDATE(DIG_FE_CNTL, DIG_START, 0);
+}
+
void enc1_stream_encoder_dp_blank(
struct dc_link *link,
struct stream_encoder *enc)
@@ -1587,6 +1600,8 @@ static const struct stream_encoder_funcs dcn10_str_enc_funcs = {
enc1_stream_encoder_send_immediate_sdp_message,
.stop_dp_info_packets =
enc1_stream_encoder_stop_dp_info_packets,
+ .reset_fifo =
+ enc1_stream_encoder_reset_fifo,
.dp_blank =
enc1_stream_encoder_dp_blank,
.dp_unblank =
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
index 687d7e4bf7ca..a146a41f68e9 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h
@@ -626,6 +626,9 @@ void enc1_stream_encoder_send_immediate_sdp_message(
void enc1_stream_encoder_stop_dp_info_packets(
struct stream_encoder *enc);
+void enc1_stream_encoder_reset_fifo(
+ struct stream_encoder *enc);
+
void enc1_stream_encoder_dp_blank(
struct dc_link *link,
struct stream_encoder *enc);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_stream_encoder.c
index aab25ca8343a..8a70f92795c2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_stream_encoder.c
@@ -593,6 +593,8 @@ static const struct stream_encoder_funcs dcn20_str_enc_funcs = {
enc1_stream_encoder_send_immediate_sdp_message,
.stop_dp_info_packets =
enc1_stream_encoder_stop_dp_info_packets,
+ .reset_fifo =
+ enc1_stream_encoder_reset_fifo,
.dp_blank =
enc1_stream_encoder_dp_blank,
.dp_unblank =
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dio_stream_encoder.c
index ebd9c35c914f..7aa9aaf5db4c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dio_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dio_stream_encoder.c
@@ -805,6 +805,8 @@ static const struct stream_encoder_funcs dcn30_str_enc_funcs = {
enc3_stream_encoder_update_dp_info_packets,
.stop_dp_info_packets =
enc1_stream_encoder_stop_dp_info_packets,
+ .reset_fifo =
+ enc1_stream_encoder_reset_fifo,
.dp_blank =
enc1_stream_encoder_dp_blank,
.dp_unblank =
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h b/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h
index c88e113b94d1..073f8b667eff 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h
@@ -164,6 +164,10 @@ struct stream_encoder_funcs {
void (*stop_dp_info_packets)(
struct stream_encoder *enc);
+ void (*reset_fifo)(
+ struct stream_encoder *enc
+ );
+
void (*dp_blank)(
struct dc_link *link,
struct stream_encoder *enc);
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 07/14] drm/amd/display: Enable DSC over eDP
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (5 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 06/14] drm/amd/display: Reset fifo after enable otg Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 08/14] drm/amd/display: Fix eDP will flash when boot to OS Wayne Lin
` (7 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, solomon.chiu, Aurabindo.Pillai,
wayne.lin, mikita.lipski, Bhawanpreet.Lakha, Nicholas Kazlauskas,
agustin.gutierrez, pavle.kotarac
From: Mikita Lipski <mikita.lipski@amd.com>
[why]
- Adding a DM interface to enable DSC over eDP on Linux
- DSC over eDP will allow to power savings by reducing
the bandwidth required to support panel's modes
- Apply link optimization algorithm to reduce link bandwidth
when DSC is enabled
[how]
- Read eDP panel's DSC capabilities
- Apply DSC policy on eDP panel based on its DSC capabilities
- Enable DSC encoder's on the pipe
- Enable DSC on panel's side by setting DSC_ENABLE DPCD register
- Adding link optimization algorithm to reduce link rate or lane
count based
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 73 +++++++-
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 2 +-
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 162 +++++++++++++++++-
drivers/gpu/drm/amd/display/dc/dc.h | 3 +
drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c | 1 +
.../drm/amd/display/dc/dcn31/dcn31_resource.c | 1 +
drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c | 8 +
drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h | 1 +
.../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 8 +-
.../amd/display/include/ddc_service_types.h | 1 +
11 files changed, 255 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 7a54ccb794f9..a15f20aaa11e 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1478,8 +1478,10 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
if (amdgpu_dc_debug_mask & DC_DISABLE_STUTTER)
adev->dm.dc->debug.disable_stutter = true;
- if (amdgpu_dc_debug_mask & DC_DISABLE_DSC)
+ if (amdgpu_dc_debug_mask & DC_DISABLE_DSC) {
adev->dm.dc->debug.disable_dsc = true;
+ adev->dm.dc->debug.disable_dsc_edp = true;
+ }
if (amdgpu_dc_debug_mask & DC_DISABLE_CLOCK_GATING)
adev->dm.dc->debug.disable_clock_gate = true;
@@ -6032,7 +6034,8 @@ static void update_dsc_caps(struct amdgpu_dm_connector *aconnector,
{
stream->timing.flags.DSC = 0;
- if (aconnector->dc_link && sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT) {
+ if (aconnector->dc_link && (sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT ||
+ sink->sink_signal == SIGNAL_TYPE_EDP)) {
dc_dsc_parse_dsc_dpcd(aconnector->dc_link->ctx->dc,
aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.raw,
aconnector->dc_link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.raw,
@@ -6040,6 +6043,64 @@ static void update_dsc_caps(struct amdgpu_dm_connector *aconnector,
}
}
+static void apply_dsc_policy_for_edp(struct amdgpu_dm_connector *aconnector,
+ struct dc_sink *sink, struct dc_stream_state *stream,
+ struct dsc_dec_dpcd_caps *dsc_caps,
+ uint32_t max_dsc_target_bpp_limit_override)
+{
+ const struct dc_link_settings *verified_link_cap = NULL;
+ uint32_t link_bw_in_kbps;
+ uint32_t edp_min_bpp_x16, edp_max_bpp_x16;
+ struct dc *dc = sink->ctx->dc;
+ struct dc_dsc_bw_range bw_range = {0};
+ struct dc_dsc_config dsc_cfg = {0};
+
+ verified_link_cap = dc_link_get_link_cap(stream->link);
+ link_bw_in_kbps = dc_link_bandwidth_kbps(stream->link, verified_link_cap);
+ edp_min_bpp_x16 = 8 * 16;
+ edp_max_bpp_x16 = 8 * 16;
+
+ if (edp_max_bpp_x16 > dsc_caps->edp_max_bits_per_pixel)
+ edp_max_bpp_x16 = dsc_caps->edp_max_bits_per_pixel;
+
+ if (edp_max_bpp_x16 < edp_min_bpp_x16)
+ edp_min_bpp_x16 = edp_max_bpp_x16;
+
+ if (dc_dsc_compute_bandwidth_range(dc->res_pool->dscs[0],
+ dc->debug.dsc_min_slice_height_override,
+ edp_min_bpp_x16, edp_max_bpp_x16,
+ dsc_caps,
+ &stream->timing,
+ &bw_range)) {
+
+ if (bw_range.max_kbps < link_bw_in_kbps) {
+ if (dc_dsc_compute_config(dc->res_pool->dscs[0],
+ dsc_caps,
+ dc->debug.dsc_min_slice_height_override,
+ max_dsc_target_bpp_limit_override,
+ 0,
+ &stream->timing,
+ &dsc_cfg)) {
+ stream->timing.dsc_cfg = dsc_cfg;
+ stream->timing.flags.DSC = 1;
+ stream->timing.dsc_cfg.bits_per_pixel = edp_max_bpp_x16;
+ }
+ return;
+ }
+ }
+
+ if (dc_dsc_compute_config(dc->res_pool->dscs[0],
+ dsc_caps,
+ dc->debug.dsc_min_slice_height_override,
+ max_dsc_target_bpp_limit_override,
+ link_bw_in_kbps,
+ &stream->timing,
+ &dsc_cfg)) {
+ stream->timing.dsc_cfg = dsc_cfg;
+ stream->timing.flags.DSC = 1;
+ }
+}
+
static void apply_dsc_policy_for_stream(struct amdgpu_dm_connector *aconnector,
struct dc_sink *sink, struct dc_stream_state *stream,
struct dsc_dec_dpcd_caps *dsc_caps)
@@ -6047,6 +6108,7 @@ static void apply_dsc_policy_for_stream(struct amdgpu_dm_connector *aconnector,
struct drm_connector *drm_connector = &aconnector->base;
uint32_t link_bandwidth_kbps;
uint32_t max_dsc_target_bpp_limit_override = 0;
+ struct dc *dc = sink->ctx->dc;
link_bandwidth_kbps = dc_link_bandwidth_kbps(aconnector->dc_link,
dc_link_get_link_cap(aconnector->dc_link));
@@ -6059,7 +6121,12 @@ static void apply_dsc_policy_for_stream(struct amdgpu_dm_connector *aconnector,
dc_dsc_policy_set_enable_dsc_when_not_needed(
aconnector->dsc_settings.dsc_force_enable == DSC_CLK_FORCE_ENABLE);
- if (aconnector->dc_link && sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT) {
+ if (aconnector->dc_link && sink->sink_signal == SIGNAL_TYPE_EDP && !dc->debug.disable_dsc_edp &&
+ dc->caps.edp_dsc_support && aconnector->dsc_settings.dsc_force_enable != DSC_CLK_FORCE_DISABLE) {
+
+ apply_dsc_policy_for_edp(aconnector, sink, stream, dsc_caps, max_dsc_target_bpp_limit_override);
+
+ } else if (aconnector->dc_link && sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT) {
if (dc_dsc_compute_config(aconnector->dc_link->ctx->dc->res_pool->dscs[0],
dsc_caps,
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index c200e07d2fb2..84bcbf0c06fc 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -584,7 +584,7 @@ bool dm_helpers_dp_write_dsc_enable(
ret = drm_dp_dpcd_write(aconnector->dsc_aux, DP_DSC_ENABLE, &enable_dsc, 1);
}
- if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT) {
+ if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT || SIGNAL_TYPE_EDP) {
ret = dm_helpers_dp_write_dpcd(ctx, stream->link, DP_DSC_ENABLE, &enable_dsc, 1);
DC_LOG_DC("Send DSC %s to sst display\n", enable_dsc ? "enable" : "disable");
}
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 8a8a5aead34d..8f23c160f291 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -4792,6 +4792,8 @@ bool dc_link_should_enable_fec(const struct dc_link *link)
link->local_sink &&
link->local_sink->edid_caps.panel_patch.disable_fec) ||
(link->connector_signal == SIGNAL_TYPE_EDP
+ // enable FEC for EDP if DSC is supported
+ && link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT == false
))
is_fec_disable = true;
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index b21f61e89cba..2910188ba514 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -3346,6 +3346,148 @@ bool decide_edp_link_settings(struct dc_link *link, struct dc_link_settings *lin
return false;
}
+static bool decide_edp_link_settings_with_dsc(struct dc_link *link,
+ struct dc_link_settings *link_setting,
+ uint32_t req_bw,
+ enum dc_link_rate max_link_rate)
+{
+ struct dc_link_settings initial_link_setting;
+ struct dc_link_settings current_link_setting;
+ uint32_t link_bw;
+
+ unsigned int policy = 0;
+
+ policy = link->ctx->dc->debug.force_dsc_edp_policy;
+ if (max_link_rate == LINK_RATE_UNKNOWN)
+ max_link_rate = link->verified_link_cap.link_rate;
+ /*
+ * edp_supported_link_rates_count is only valid for eDP v1.4 or higher.
+ * Per VESA eDP spec, "The DPCD revision for eDP v1.4 is 13h"
+ */
+ if ((link->dpcd_caps.dpcd_rev.raw < DPCD_REV_13 ||
+ link->dpcd_caps.edp_supported_link_rates_count == 0)) {
+ /* for DSC enabled case, we search for minimum lane count */
+ memset(&initial_link_setting, 0, sizeof(initial_link_setting));
+ initial_link_setting.lane_count = LANE_COUNT_ONE;
+ initial_link_setting.link_rate = LINK_RATE_LOW;
+ initial_link_setting.link_spread = LINK_SPREAD_DISABLED;
+ initial_link_setting.use_link_rate_set = false;
+ initial_link_setting.link_rate_set = 0;
+ current_link_setting = initial_link_setting;
+ if (req_bw > dc_link_bandwidth_kbps(link, &link->verified_link_cap))
+ return false;
+
+ /* search for the minimum link setting that:
+ * 1. is supported according to the link training result
+ * 2. could support the b/w requested by the timing
+ */
+ while (current_link_setting.link_rate <=
+ max_link_rate) {
+ link_bw = dc_link_bandwidth_kbps(
+ link,
+ ¤t_link_setting);
+ if (req_bw <= link_bw) {
+ *link_setting = current_link_setting;
+ return true;
+ }
+ if (policy) {
+ /* minimize lane */
+ if (current_link_setting.link_rate < max_link_rate) {
+ current_link_setting.link_rate =
+ increase_link_rate(
+ current_link_setting.link_rate);
+ } else {
+ if (current_link_setting.lane_count <
+ link->verified_link_cap.lane_count) {
+ current_link_setting.lane_count =
+ increase_lane_count(
+ current_link_setting.lane_count);
+ current_link_setting.link_rate = initial_link_setting.link_rate;
+ } else
+ break;
+ }
+ } else {
+ /* minimize link rate */
+ if (current_link_setting.lane_count <
+ link->verified_link_cap.lane_count) {
+ current_link_setting.lane_count =
+ increase_lane_count(
+ current_link_setting.lane_count);
+ } else {
+ current_link_setting.link_rate =
+ increase_link_rate(
+ current_link_setting.link_rate);
+ current_link_setting.lane_count =
+ initial_link_setting.lane_count;
+ }
+ }
+ }
+ return false;
+ }
+
+ /* if optimize edp link is supported */
+ memset(&initial_link_setting, 0, sizeof(initial_link_setting));
+ initial_link_setting.lane_count = LANE_COUNT_ONE;
+ initial_link_setting.link_rate = link->dpcd_caps.edp_supported_link_rates[0];
+ initial_link_setting.link_spread = LINK_SPREAD_DISABLED;
+ initial_link_setting.use_link_rate_set = true;
+ initial_link_setting.link_rate_set = 0;
+ current_link_setting = initial_link_setting;
+
+ /* search for the minimum link setting that:
+ * 1. is supported according to the link training result
+ * 2. could support the b/w requested by the timing
+ */
+ while (current_link_setting.link_rate <=
+ max_link_rate) {
+ link_bw = dc_link_bandwidth_kbps(
+ link,
+ ¤t_link_setting);
+ if (req_bw <= link_bw) {
+ *link_setting = current_link_setting;
+ return true;
+ }
+ if (policy) {
+ /* minimize lane */
+ if (current_link_setting.link_rate_set <
+ link->dpcd_caps.edp_supported_link_rates_count
+ && current_link_setting.link_rate < max_link_rate) {
+ current_link_setting.link_rate_set++;
+ current_link_setting.link_rate =
+ link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set];
+ } else {
+ if (current_link_setting.lane_count < link->verified_link_cap.lane_count) {
+ current_link_setting.lane_count =
+ increase_lane_count(
+ current_link_setting.lane_count);
+ current_link_setting.link_rate_set = initial_link_setting.link_rate_set;
+ current_link_setting.link_rate =
+ link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set];
+ } else
+ break;
+ }
+ } else {
+ /* minimize link rate */
+ if (current_link_setting.lane_count <
+ link->verified_link_cap.lane_count) {
+ current_link_setting.lane_count =
+ increase_lane_count(
+ current_link_setting.lane_count);
+ } else {
+ if (current_link_setting.link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) {
+ current_link_setting.link_rate_set++;
+ current_link_setting.link_rate =
+ link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set];
+ current_link_setting.lane_count =
+ initial_link_setting.lane_count;
+ } else
+ break;
+ }
+ }
+ }
+ return false;
+}
+
static bool decide_mst_link_settings(const struct dc_link *link, struct dc_link_settings *link_setting)
{
*link_setting = link->verified_link_cap;
@@ -3380,7 +3522,25 @@ void decide_link_settings(struct dc_stream_state *stream,
if (decide_mst_link_settings(link, link_setting))
return;
} else if (link->connector_signal == SIGNAL_TYPE_EDP) {
- if (decide_edp_link_settings(link, link_setting, req_bw))
+ /* enable edp link optimization for DSC eDP case */
+ if (stream->timing.flags.DSC) {
+ enum dc_link_rate max_link_rate = LINK_RATE_UNKNOWN;
+
+ if (link->ctx->dc->debug.force_dsc_edp_policy) {
+ /* calculate link max link rate cap*/
+ struct dc_link_settings tmp_link_setting;
+ struct dc_crtc_timing tmp_timing = stream->timing;
+ uint32_t orig_req_bw;
+
+ tmp_link_setting.link_rate = LINK_RATE_UNKNOWN;
+ tmp_timing.flags.DSC = 0;
+ orig_req_bw = dc_bandwidth_in_kbps_from_timing(&tmp_timing);
+ decide_edp_link_settings(link, &tmp_link_setting, orig_req_bw);
+ max_link_rate = tmp_link_setting.link_rate;
+ }
+ if (decide_edp_link_settings_with_dsc(link, link_setting, req_bw, max_link_rate))
+ return;
+ } else if (decide_edp_link_settings(link, link_setting, req_bw))
return;
} else if (decide_dp_link_settings(link, link_setting, req_bw))
return;
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 2bebc52c8ed9..764663df7887 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -188,6 +188,7 @@ struct dc_caps {
#if defined(CONFIG_DRM_AMD_DC_DCN)
bool dp_hpo;
#endif
+ bool edp_dsc_support;
bool vbios_lttpr_aware;
bool vbios_lttpr_enable;
};
@@ -667,6 +668,8 @@ struct dc_debug_options {
bool validate_dml_output;
bool enable_dmcub_surface_flip;
bool usbc_combo_phy_reset_wa;
+ bool disable_dsc_edp;
+ unsigned int force_dsc_edp_policy;
bool enable_dram_clock_change_one_display_vactive;
#if defined(CONFIG_DRM_AMD_DC_DCN)
/* TODO - remove once tested */
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c b/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
index 60b2ccffaf90..87ed48d5530d 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
@@ -329,6 +329,7 @@ static bool dmub_psr_copy_settings(struct dmub_psr *dmub,
copy_settings_data->fec_enable_delay_in100us = link->dc->debug.fec_enable_delay_in100us;
copy_settings_data->cmd_version = DMUB_CMD_PSR_CONTROL_VERSION_1;
copy_settings_data->panel_inst = panel_inst;
+ copy_settings_data->dsc_enable_status = (pipe_ctx->stream->timing.flags.DSC == 1);
if (link->fec_state == dc_link_fec_enabled &&
(!memcmp(link->dpcd_caps.sink_dev_id_str, DP_SINK_DEVICE_STR_ID_1,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
index a7aeb236a884..6460fab496f6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c
@@ -2193,6 +2193,7 @@ static bool dcn31_resource_construct(
dc->caps.post_blend_color_processing = true;
dc->caps.force_dp_tps4_for_cp2520 = true;
dc->caps.dp_hpo = true;
+ dc->caps.edp_dsc_support = true;
dc->caps.extended_aux_timeout_support = true;
dc->caps.dmcub_support = true;
dc->caps.is_apu = true;
diff --git a/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c b/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c
index 2d0f1f4a8fff..9c74564cbd8d 100644
--- a/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c
+++ b/drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c
@@ -455,6 +455,7 @@ static bool intersect_dsc_caps(
if (pixel_encoding == PIXEL_ENCODING_YCBCR422 || pixel_encoding == PIXEL_ENCODING_YCBCR420)
dsc_common_caps->bpp_increment_div = min(dsc_common_caps->bpp_increment_div, (uint32_t)8);
+ dsc_common_caps->edp_sink_max_bits_per_pixel = dsc_sink_caps->edp_max_bits_per_pixel;
dsc_common_caps->is_dp = dsc_sink_caps->is_dp;
return true;
}
@@ -513,6 +514,13 @@ static bool decide_dsc_bandwidth_range(
range->min_target_bpp_x16 = preferred_bpp_x16;
}
}
+ /* TODO - make this value generic to all signal types */
+ else if (dsc_caps->edp_sink_max_bits_per_pixel) {
+ /* apply max bpp limitation from edp sink */
+ range->max_target_bpp_x16 = MIN(dsc_caps->edp_sink_max_bits_per_pixel,
+ max_bpp_x16);
+ range->min_target_bpp_x16 = min_bpp_x16;
+ }
else {
range->max_target_bpp_x16 = max_bpp_x16;
range->min_target_bpp_x16 = min_bpp_x16;
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h b/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h
index f94135c6e3c2..0c83e79d3ce3 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h
@@ -88,6 +88,7 @@ struct dsc_enc_caps {
int32_t max_total_throughput_mps; /* Maximum total throughput with all the slices combined */
int32_t max_slice_width;
uint32_t bpp_increment_div; /* bpp increment divisor, e.g. if 16, it's 1/16th of a bit */
+ uint32_t edp_sink_max_bits_per_pixel;
bool is_dp;
};
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 93631b0db881..ba30ab11b2ae 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -1550,10 +1550,14 @@ struct dmub_cmd_psr_copy_settings_data {
* Currently the support is only for 0 or 1
*/
uint8_t panel_inst;
+ /*
+ * DSC enable status in driver
+ */
+ uint8_t dsc_enable_status;
/**
- * Explicit padding to 4 byte boundary.
+ * Explicit padding to 3 byte boundary.
*/
- uint8_t pad3[4];
+ uint8_t pad3[3];
};
/**
diff --git a/drivers/gpu/drm/amd/display/include/ddc_service_types.h b/drivers/gpu/drm/amd/display/include/ddc_service_types.h
index 85b25e684464..a2b80514d83e 100644
--- a/drivers/gpu/drm/amd/display/include/ddc_service_types.h
+++ b/drivers/gpu/drm/amd/display/include/ddc_service_types.h
@@ -35,6 +35,7 @@
#define DP_BRANCH_DEVICE_ID_00E04C 0x00E04C
#define DP_BRANCH_DEVICE_ID_006037 0x006037
+#define DP_DEVICE_ID_38EC11 0x38EC11
enum ddc_result {
DDC_RESULT_UNKNOWN = 0,
DDC_RESULT_SUCESSFULL,
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 08/14] drm/amd/display: Fix eDP will flash when boot to OS
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (6 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 07/14] drm/amd/display: Enable DSC over eDP Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 09/14] drm/amd/display: Visual Confirm Bar Height Adjust Wayne Lin
` (6 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, Brandon Syu, solomon.chiu,
Aurabindo.Pillai, wayne.lin, mikita.lipski, Bhawanpreet.Lakha,
Nicholas Kazlauskas, agustin.gutierrez, pavle.kotarac
From: Brandon Syu <Brandon.Syu@amd.com>
[WHY]
With eDP DSC enabled and set 4K 60Hz, there would be screen
corruption when booting to OS or enabling the driver.
[HOW]
Avoid powering down VDD when we cannot apply eDP fast boot.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 5 ++++-
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 2 +-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 2910188ba514..6379b4a4757a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -6045,7 +6045,10 @@ bool is_edp_ilr_optimization_required(struct dc_link *link, struct dc_crtc_timin
req_bw = dc_bandwidth_in_kbps_from_timing(crtc_timing);
- decide_edp_link_settings(link, &link_setting, req_bw);
+ if (!crtc_timing->flags.DSC)
+ decide_edp_link_settings(link, &link_setting, req_bw);
+ else
+ decide_edp_link_settings_with_dsc(link, &link_setting, req_bw, LINK_RATE_UNKNOWN);
if (link->dpcd_caps.edp_supported_link_rates[link_rate_set] != link_setting.link_rate ||
lane_count_set.bits.LANE_COUNT_SET != link_setting.lane_count) {
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 665cf58b0724..3d421583e9ca 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1833,7 +1833,7 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
}
}
// We are trying to enable eDP, don't power down VDD
- if (edp_stream_num)
+ if (edp_stream_num && can_apply_edp_fast_boot)
keep_edp_vdd_on = true;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 09/14] drm/amd/display: Visual Confirm Bar Height Adjust
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (7 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 08/14] drm/amd/display: Fix eDP will flash when boot to OS Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 10/14] drm/amd/display: [FW Promotion] Release 0.0.92 Wayne Lin
` (5 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Anthony Koo, hvanzyll, Sunpeng.Li, Harry.Wentland,
qingqing.zhuo, Rodrigo.Siqueira, roman.li, solomon.chiu,
Aurabindo.Pillai, wayne.lin, mikita.lipski, Bhawanpreet.Lakha,
agustin.gutierrez, pavle.kotarac
From: hvanzyll <hvanzyll@amd.com>
[What]
This change allows adjustment to the Visual Confirm
height border.
[Why]
Aids debugging and testing
[How]
Use the existing infrastructure to implement logic to
draw borders
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
---
drivers/gpu/drm/amd/display/dc/dc.h | 2 ++
.../gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 14 +++++++++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 764663df7887..6b4c9e9705c0 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -574,6 +574,8 @@ struct dc_debug_options {
bool native422_support;
bool disable_dsc;
enum visual_confirm visual_confirm;
+ int visual_confirm_rect_height;
+
bool sanity_checks;
bool max_disp_clk;
bool surface_trace;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
index 44293d66b46b..e31a6f1516bb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c
@@ -39,6 +39,10 @@
#define BLACK_OFFSET_RGB_Y 0x0
#define BLACK_OFFSET_CBCR 0x8000
+#define VISUAL_CONFIRM_RECT_HEIGHT_DEFAULT 3
+#define VISUAL_CONFIRM_RECT_HEIGHT_MIN 1
+#define VISUAL_CONFIRM_RECT_HEIGHT_MAX 10
+
#define REG(reg)\
dpp->tf_regs->reg
@@ -685,9 +689,17 @@ static void dpp1_dscl_set_recout(struct dcn10_dpp *dpp,
const struct rect *recout)
{
int visual_confirm_on = 0;
+ unsigned short visual_confirm_rect_height = VISUAL_CONFIRM_RECT_HEIGHT_DEFAULT;
+
if (dpp->base.ctx->dc->debug.visual_confirm != VISUAL_CONFIRM_DISABLE)
visual_confirm_on = 1;
+ /* Check bounds to ensure the VC bar height was set to a sane value */
+ if ((dpp->base.ctx->dc->debug.visual_confirm_rect_height >= VISUAL_CONFIRM_RECT_HEIGHT_MIN) &&
+ (dpp->base.ctx->dc->debug.visual_confirm_rect_height <= VISUAL_CONFIRM_RECT_HEIGHT_MAX)) {
+ visual_confirm_rect_height = dpp->base.ctx->dc->debug.visual_confirm_rect_height;
+ }
+
REG_SET_2(RECOUT_START, 0,
/* First pixel of RECOUT in the active OTG area */
RECOUT_START_X, recout->x,
@@ -699,7 +711,7 @@ static void dpp1_dscl_set_recout(struct dcn10_dpp *dpp,
RECOUT_WIDTH, recout->width,
/* Number of RECOUT vertical lines */
RECOUT_HEIGHT, recout->height
- - visual_confirm_on * 2 * (dpp->base.inst + 1));
+ - visual_confirm_on * 2 * (dpp->base.inst + visual_confirm_rect_height));
}
/**
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 10/14] drm/amd/display: [FW Promotion] Release 0.0.92
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (8 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 09/14] drm/amd/display: Visual Confirm Bar Height Adjust Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 11/14] drm/amd/display: [FW Promotion] Release 0.0.93 Wayne Lin
` (4 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Anthony Koo, Sunpeng.Li, Harry.Wentland,
qingqing.zhuo, Rodrigo.Siqueira, roman.li, solomon.chiu,
Aurabindo.Pillai, wayne.lin, mikita.lipski, Bhawanpreet.Lakha,
agustin.gutierrez, pavle.kotarac
From: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
---
drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index ba30ab11b2ae..014ebd7242d5 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -47,10 +47,10 @@
/* Firmware versioning. */
#ifdef DMUB_EXPOSE_VERSION
-#define DMUB_FW_VERSION_GIT_HASH 0x1d82d23e
+#define DMUB_FW_VERSION_GIT_HASH 0x058d3791
#define DMUB_FW_VERSION_MAJOR 0
#define DMUB_FW_VERSION_MINOR 0
-#define DMUB_FW_VERSION_REVISION 91
+#define DMUB_FW_VERSION_REVISION 92
#define DMUB_FW_VERSION_TEST 0
#define DMUB_FW_VERSION_VBIOS 0
#define DMUB_FW_VERSION_HOTFIX 0
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 11/14] drm/amd/display: [FW Promotion] Release 0.0.93
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (9 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 10/14] drm/amd/display: [FW Promotion] Release 0.0.92 Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 12/14] drm/amd/display: fixed the DSC power off sequence during Driver PnP Wayne Lin
` (3 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Aric Cyr, Anthony Koo, Sunpeng.Li, Harry.Wentland,
qingqing.zhuo, Rodrigo.Siqueira, roman.li, solomon.chiu,
Aurabindo.Pillai, wayne.lin, mikita.lipski, Bhawanpreet.Lakha,
agustin.gutierrez, pavle.kotarac
From: Anthony Koo <Anthony.Koo@amd.com>
- Fix ARR39-C issue with scaled integer addition in rb func
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
---
drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
index 014ebd7242d5..20efa1f61914 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h
@@ -47,10 +47,10 @@
/* Firmware versioning. */
#ifdef DMUB_EXPOSE_VERSION
-#define DMUB_FW_VERSION_GIT_HASH 0x058d3791
+#define DMUB_FW_VERSION_GIT_HASH 0xcd0e1e7a
#define DMUB_FW_VERSION_MAJOR 0
#define DMUB_FW_VERSION_MINOR 0
-#define DMUB_FW_VERSION_REVISION 92
+#define DMUB_FW_VERSION_REVISION 93
#define DMUB_FW_VERSION_TEST 0
#define DMUB_FW_VERSION_VBIOS 0
#define DMUB_FW_VERSION_HOTFIX 0
@@ -2726,7 +2726,7 @@ static inline bool dmub_rb_full(struct dmub_rb *rb)
static inline bool dmub_rb_push_front(struct dmub_rb *rb,
const union dmub_rb_cmd *cmd)
{
- uint64_t volatile *dst = (uint64_t volatile *)(rb->base_address) + rb->wrpt / sizeof(uint64_t);
+ uint64_t volatile *dst = (uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->wrpt);
const uint64_t *src = (const uint64_t *)cmd;
uint8_t i;
@@ -2844,7 +2844,7 @@ static inline bool dmub_rb_peek_offset(struct dmub_rb *rb,
static inline bool dmub_rb_out_front(struct dmub_rb *rb,
union dmub_rb_out_cmd *cmd)
{
- const uint64_t volatile *src = (const uint64_t volatile *)(rb->base_address) + rb->rptr / sizeof(uint64_t);
+ const uint64_t volatile *src = (const uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->rptr);
uint64_t *dst = (uint64_t *)cmd;
uint8_t i;
@@ -2892,7 +2892,7 @@ static inline void dmub_rb_flush_pending(const struct dmub_rb *rb)
uint32_t wptr = rb->wrpt;
while (rptr != wptr) {
- uint64_t volatile *data = (uint64_t volatile *)rb->base_address + rptr / sizeof(uint64_t);
+ uint64_t volatile *data = (uint64_t volatile *)((uint8_t *)(rb->base_address) + rptr);
//uint64_t volatile *p = (uint64_t volatile *)data;
uint64_t temp;
uint8_t i;
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 12/14] drm/amd/display: fixed the DSC power off sequence during Driver PnP
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (10 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 11/14] drm/amd/display: [FW Promotion] Release 0.0.93 Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 13/14] drm/amd/display: 3.2.162 Wayne Lin
` (2 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Anthony Koo, Yi-Ling Chen, Sunpeng.Li,
Harry.Wentland, qingqing.zhuo, Rodrigo.Siqueira, roman.li,
solomon.chiu, Aurabindo.Pillai, wayne.lin, mikita.lipski,
Bhawanpreet.Lakha, agustin.gutierrez, pavle.kotarac
From: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
[WHY]
After unloading driver, driver would not disable DSC function.
At next loading driver, driver would power all DSC engines off.
When driver powered the active DSC off, the screen would be gray
until reprograming DSC relatived register correcntly.
[HOW]
1. Remove DSC Power down code into init_pipes()
2. Depend on the OTG mapping information and DSC status to skip
power off for the working DSC.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
---
.../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 37 +++++++++++++++++++
.../gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c | 2 +
.../gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 14 +++++++
.../gpu/drm/amd/display/dc/dcn20/dcn20_optc.h | 3 ++
.../gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 1 +
.../drm/amd/display/dc/dcn31/dcn31_hwseq.c | 5 ---
.../gpu/drm/amd/display/dc/dcn31/dcn31_optc.c | 1 +
drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h | 2 +
.../amd/display/dc/inc/hw/timing_generator.h | 2 +
9 files changed, 62 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 135e2b58cc73..c50427bfab77 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1362,6 +1362,43 @@ void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
tg->funcs->tg_init(tg);
}
+
+ /* Power gate DSCs */
+ if (hws->funcs.dsc_pg_control != NULL) {
+ uint32_t num_opps = 0;
+ uint32_t opp_id_src0 = OPP_ID_INVALID;
+ uint32_t opp_id_src1 = OPP_ID_INVALID;
+
+ // Step 1: To find out which OPTC is running & OPTC DSC is ON
+ for (i = 0; i < dc->res_pool->res_cap->num_timing_generator; i++) {
+ uint32_t optc_dsc_state = 0;
+ struct timing_generator *tg = dc->res_pool->timing_generators[i];
+
+ if (tg->funcs->is_tg_enabled(tg)) {
+ if (tg->funcs->get_dsc_status)
+ tg->funcs->get_dsc_status(tg, &optc_dsc_state);
+ // Only one OPTC with DSC is ON, so if we got one result, we would exit this block.
+ // non-zero value is DSC enabled
+ if (optc_dsc_state != 0) {
+ tg->funcs->get_optc_source(tg, &num_opps, &opp_id_src0, &opp_id_src1);
+ break;
+ }
+ }
+ }
+
+ // Step 2: To power down DSC but skip DSC of running OPTC
+ for (i = 0; i < dc->res_pool->res_cap->num_dsc; i++) {
+ struct dcn_dsc_state s = {0};
+
+ dc->res_pool->dscs[i]->funcs->dsc_read_state(dc->res_pool->dscs[i], &s);
+
+ if ((s.dsc_opp_source == opp_id_src0 || s.dsc_opp_source == opp_id_src1) &&
+ s.dsc_clock_en && s.dsc_fw_en)
+ continue;
+
+ hws->funcs.dsc_pg_control(hws, dc->res_pool->dscs[i]->inst, false);
+ }
+ }
}
void dcn10_init_hw(struct dc *dc)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
index 79b640e202eb..ef5c4c0f4d6c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
@@ -162,6 +162,8 @@ static void dsc2_read_state(struct display_stream_compressor *dsc, struct dcn_ds
REG_GET(DSCC_PPS_CONFIG2, PIC_WIDTH, &s->dsc_pic_width);
REG_GET(DSCC_PPS_CONFIG2, PIC_HEIGHT, &s->dsc_pic_height);
REG_GET(DSCC_PPS_CONFIG7, SLICE_BPG_OFFSET, &s->dsc_slice_bpg_offset);
+ REG_GET_2(DSCRM_DSC_FORWARD_CONFIG, DSCRM_DSC_FORWARD_EN, &s->dsc_fw_en,
+ DSCRM_DSC_OPP_PIPE_SOURCE, &s->dsc_opp_source);
}
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
index c90b8516dcc1..8c34751b0e58 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
@@ -190,6 +190,19 @@ void optc2_set_dsc_config(struct timing_generator *optc,
OPTC_DSC_SLICE_WIDTH, dsc_slice_width);
}
+/* Get DSC-related configuration.
+ * dsc_mode: 0 disables DSC, other values enable DSC in specified format
+ */
+void optc2_get_dsc_status(struct timing_generator *optc,
+ uint32_t *dsc_mode)
+{
+ struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+ REG_GET(OPTC_DATA_FORMAT_CONTROL,
+ OPTC_DSC_MODE, dsc_mode);
+}
+
+
/*TEMP: Need to figure out inheritance model here.*/
bool optc2_is_two_pixels_per_containter(const struct dc_crtc_timing *timing)
{
@@ -579,6 +592,7 @@ static struct timing_generator_funcs dcn20_tg_funcs = {
.get_crc = optc1_get_crc,
.configure_crc = optc2_configure_crc,
.set_dsc_config = optc2_set_dsc_config,
+ .get_dsc_status = optc2_get_dsc_status,
.set_dwb_source = optc2_set_dwb_source,
.set_odm_bypass = optc2_set_odm_bypass,
.set_odm_combine = optc2_set_odm_combine,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h
index be19a6885fbf..f7968b9ca16e 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h
@@ -98,6 +98,9 @@ void optc2_set_dsc_config(struct timing_generator *optc,
uint32_t dsc_bytes_per_pixel,
uint32_t dsc_slice_width);
+void optc2_get_dsc_status(struct timing_generator *optc,
+ uint32_t *dsc_mode);
+
void optc2_set_odm_bypass(struct timing_generator *optc,
const struct dc_crtc_timing *dc_crtc_timing);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
index 5d9e6413d67a..f5e8916601d3 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c
@@ -332,6 +332,7 @@ static struct timing_generator_funcs dcn30_tg_funcs = {
.get_crc = optc1_get_crc,
.configure_crc = optc2_configure_crc,
.set_dsc_config = optc3_set_dsc_config,
+ .get_dsc_status = optc2_get_dsc_status,
.set_dwb_source = NULL,
.set_odm_bypass = optc3_set_odm_bypass,
.set_odm_combine = optc3_set_odm_combine,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
index bdaeb6ebdacb..a668feff30b8 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c
@@ -192,11 +192,6 @@ void dcn31_init_hw(struct dc *dc)
link->link_status.link_active = true;
}
- /* Power gate DSCs */
- for (i = 0; i < res_pool->res_cap->num_dsc; i++)
- if (hws->funcs.dsc_pg_control != NULL)
- hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false);
-
/* Enables outbox notifications for usb4 dpia */
if (dc->res_pool->usb4_dpia_count)
dmub_enable_outbox_notification(dc);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c
index a4b1d98f0007..e8562fa11366 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_optc.c
@@ -256,6 +256,7 @@ static struct timing_generator_funcs dcn31_tg_funcs = {
.get_crc = optc1_get_crc,
.configure_crc = optc2_configure_crc,
.set_dsc_config = optc3_set_dsc_config,
+ .get_dsc_status = optc2_get_dsc_status,
.set_dwb_source = NULL,
.set_odm_bypass = optc3_set_odm_bypass,
.set_odm_combine = optc31_set_odm_combine,
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h b/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h
index 0c83e79d3ce3..346f0ba73e86 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h
@@ -61,6 +61,8 @@ struct dcn_dsc_state {
uint32_t dsc_pic_height;
uint32_t dsc_slice_bpg_offset;
uint32_t dsc_chunk_size;
+ uint32_t dsc_fw_en;
+ uint32_t dsc_opp_source;
};
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
index 7390baf916b5..c29320b3855d 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/timing_generator.h
@@ -290,6 +290,8 @@ struct timing_generator_funcs {
enum optc_dsc_mode dsc_mode,
uint32_t dsc_bytes_per_pixel,
uint32_t dsc_slice_width);
+ void (*get_dsc_status)(struct timing_generator *optc,
+ uint32_t *dsc_mode);
void (*set_odm_bypass)(struct timing_generator *optc, const struct dc_crtc_timing *dc_crtc_timing);
void (*set_odm_combine)(struct timing_generator *optc, int *opp_id, int opp_cnt,
struct dc_crtc_timing *timing);
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 13/14] drm/amd/display: 3.2.162
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (11 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 12/14] drm/amd/display: fixed the DSC power off sequence during Driver PnP Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-12 0:54 ` [PATCH 14/14] drm/amd/display: Revert "retain/release stream pointer in link enc table" Wayne Lin
2021-11-15 14:35 ` [PATCH 00/14] DC Patches November 12, 2021 Wheeler, Daniel
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Aric Cyr, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, solomon.chiu, Aurabindo.Pillai,
wayne.lin, mikita.lipski, Bhawanpreet.Lakha, agustin.gutierrez,
pavle.kotarac
From: Aric Cyr <aric.cyr@amd.com>
This version brings along following fixes:
- Fix issue that secondary display goes blank on Non DCN31.
- Adjust flushing data in DMCUB
- Revert patches which cause regression in hadnling MPO/Link encoder assignment
- Correct the setting within MSA of DP2.0
- Adjustment for DML isolation
- Fix FIFO erro in fast boot sequence
- Enable DSC over eDP
- Adjust the DSC power off sequence
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
---
drivers/gpu/drm/amd/display/dc/dc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 6b4c9e9705c0..a43583c6e90e 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -47,7 +47,7 @@ struct aux_payload;
struct set_config_cmd_payload;
struct dmub_notification;
-#define DC_VER "3.2.161"
+#define DC_VER "3.2.162"
#define MAX_SURFACES 3
#define MAX_PLANES 6
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 14/14] drm/amd/display: Revert "retain/release stream pointer in link enc table"
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (12 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 13/14] drm/amd/display: 3.2.162 Wayne Lin
@ 2021-11-12 0:54 ` Wayne Lin
2021-11-15 14:35 ` [PATCH 00/14] DC Patches November 12, 2021 Wheeler, Daniel
14 siblings, 0 replies; 16+ messages in thread
From: Wayne Lin @ 2021-11-12 0:54 UTC (permalink / raw)
To: amd-gfx
Cc: stylon.wang, Aric Cyr, Sunpeng.Li, Harry.Wentland, qingqing.zhuo,
Rodrigo.Siqueira, roman.li, solomon.chiu, Aurabindo.Pillai,
wayne.lin, mikita.lipski, Bhawanpreet.Lakha, Sung Joon Kim,
agustin.gutierrez, pavle.kotarac
From: Sung Joon Kim <sungkim@amd.com>
[why]
Change causing issue. Need to revert the change.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c
index d3c789f26a02..8b319992c71d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c
@@ -122,7 +122,6 @@ static void remove_link_enc_assignment(
stream->link_enc = NULL;
state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].eng_id = ENGINE_ID_UNKNOWN;
state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].stream = NULL;
- dc_stream_release(stream);
break;
}
}
@@ -145,7 +144,6 @@ static void add_link_enc_assignment(
*/
for (i = 0; i < state->stream_count; i++) {
if (stream == state->streams[i]) {
- dc_stream_retain(stream);
state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i] = (struct link_enc_assignment){
.valid = true,
.ep_id = (struct display_endpoint_id) {
--
2.25.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* RE: [PATCH 00/14] DC Patches November 12, 2021
2021-11-12 0:54 [PATCH 00/14] DC Patches November 12, 2021 Wayne Lin
` (13 preceding siblings ...)
2021-11-12 0:54 ` [PATCH 14/14] drm/amd/display: Revert "retain/release stream pointer in link enc table" Wayne Lin
@ 2021-11-15 14:35 ` Wheeler, Daniel
14 siblings, 0 replies; 16+ messages in thread
From: Wheeler, Daniel @ 2021-11-15 14:35 UTC (permalink / raw)
To: Lin, Wayne, amd-gfx@lists.freedesktop.org
Cc: Wang, Chao-kai (Stylon), Li, Sun peng (Leo), Lakha, Bhawanpreet,
Zhuo, Qingqing, Siqueira, Rodrigo, Li, Roman, Chiu, Solomon,
Pillai, Aurabindo, Lin, Wayne, Lipski, Mikita, Wentland, Harry,
Gutierrez, Agustin, Kotarac, Pavle
[Public]
Hi all,
This week this patchset was tested on the following systems:
HP Envy 360, with Ryzen 5 4500U, with the following display types: eDP 1080p 60hz, 4k 60hz (via USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI), 1680*1050 60hz (via USB-C to DP and then DP to DVI/VGA)
AMD Ryzen 9 5900H, with the following display types: eDP 1080p 60hz, 4k 60hz (via USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI), 1680*1050 60hz (via USB-C to DP and then DP to DVI/VGA)
Sapphire Pulse RX5700XT with the following display types:
4k 60hz (via DP/HDMI), 1440p 144hz (via DP/HDMI), 1680*1050 60hz (via DP to DVI/VGA)
Reference AMD RX6800 with the following display types:
4k 60hz (via DP/HDMI and USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI and USB-C to DP/HDMI), 1680*1050 60hz (via DP to DVI/VGA)
Included testing using a Startech DP 1.4 MST hub at 2x 4k 60hz, and 3x 1080p 60hz on all systems. Also tested DSC via USB-C to DP DSC Hub with 3x 4k 60hz on Ryzen 9 5900h and Ryzen 5 4500u.
Tested on Ubuntu 20.04.3 with Kernel Version 5.13 and ChromeOS
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Thank you,
Dan Wheeler
Technologist | AMD
SW Display
------------------------------------------------------------------------------------------------------------------
1 Commerce Valley Dr E, Thornhill, ON L3T 7X6
Facebook | Twitter | amd.com
-----Original Message-----
From: amd-gfx <amd-gfx-bounces@lists.freedesktop.org> On Behalf Of Wayne Lin
Sent: November 11, 2021 7:54 PM
To: amd-gfx@lists.freedesktop.org
Cc: Wang, Chao-kai (Stylon) <Stylon.Wang@amd.com>; Li, Sun peng (Leo) <Sunpeng.Li@amd.com>; Wentland, Harry <Harry.Wentland@amd.com>; Zhuo, Qingqing <Qingqing.Zhuo@amd.com>; Siqueira, Rodrigo <Rodrigo.Siqueira@amd.com>; Li, Roman <Roman.Li@amd.com>; Chiu, Solomon <Solomon.Chiu@amd.com>; Pillai, Aurabindo <Aurabindo.Pillai@amd.com>; Lin, Wayne <Wayne.Lin@amd.com>; Lipski, Mikita <Mikita.Lipski@amd.com>; Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>; Gutierrez, Agustin <Agustin.Gutierrez@amd.com>; Kotarac, Pavle <Pavle.Kotarac@amd.com>
Subject: [PATCH 00/14] DC Patches November 12, 2021
This DC patchset brings improvements in multiple areas. In summary, we highlight:
- Fix issue that secondary display goes blank on Non DCN31.
- Adjust flushing data in DMCUB
- Revert patches which cause regression in hadnling MPO/Link encoder assignment
- Correct the setting within MSA of DP2.0
- Adjustment for DML isolation
- Fix FIFO erro in fast boot sequence
- Enable DSC over eDP
- Adjust the DSC power off sequence
---
Ahmad Othman (1):
drm/amd/display: Secondary display goes blank on Non DCN31
Angus Wang (1):
drm/amd/display: Revert changes for MPO underflow
Anthony Koo (2):
drm/amd/display: [FW Promotion] Release 0.0.92
drm/amd/display: [FW Promotion] Release 0.0.93
Aric Cyr (1):
drm/amd/display: 3.2.162
Brandon Syu (1):
drm/amd/display: Fix eDP will flash when boot to OS
Jun Lei (1):
drm/amd/display: Code change for DML isolation
Mikita Lipski (1):
drm/amd/display: Enable DSC over eDP
Nicholas Kazlauskas (1):
drm/amd/display: Only flush delta from last command execution
Sung Joon Kim (1):
drm/amd/display: Revert "retain/release stream pointer in link enc
table"
Wenjing Liu (1):
drm/amd/display: set MSA vsp/hsp to 0 for positive polarity for DP
128b/132b
Xu, Jinze (1):
drm/amd/display: Reset fifo after enable otg
Yi-Ling Chen (1):
drm/amd/display: fixed the DSC power off sequence during Driver PnP
hvanzyll (1):
drm/amd/display: Visual Confirm Bar Height Adjust
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 73 +-
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 2 +-
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +-
.../gpu/drm/amd/display/dc/core/dc_link_dp.c | 167 +-
.../drm/amd/display/dc/core/dc_link_enc_cfg.c | 2 -
drivers/gpu/drm/amd/display/dc/dc.h | 7 +-
drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c | 1 +
.../display/dc/dce110/dce110_hw_sequencer.c | 7 +-
.../drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 14 +-
.../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 37 +
.../display/dc/dcn10/dcn10_stream_encoder.c | 15 +
.../display/dc/dcn10/dcn10_stream_encoder.h | 3 +
.../gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c | 2 +
.../gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 14 +
.../gpu/drm/amd/display/dc/dcn20/dcn20_optc.h | 3 +
.../drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +-
.../display/dc/dcn20/dcn20_stream_encoder.c | 2 +
.../dc/dcn30/dcn30_dio_stream_encoder.c | 2 +
.../gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 1 +
.../drm/amd/display/dc/dcn30/dcn30_resource.c | 2 +-
.../amd/display/dc/dcn302/dcn302_resource.c | 2 +-
.../amd/display/dc/dcn303/dcn303_resource.c | 2 +-
.../dc/dcn31/dcn31_hpo_dp_stream_encoder.c | 4 +-
.../drm/amd/display/dc/dcn31/dcn31_hwseq.c | 5 -
.../gpu/drm/amd/display/dc/dcn31/dcn31_optc.c | 1 +
.../drm/amd/display/dc/dcn31/dcn31_resource.c | 1 +
.../drm/amd/display/dc/dml/display_mode_lib.h | 1 +
.../gpu/drm/amd/display/dc/dml/dml_wrapper.c | 1889 +++++++++++++++++ .../display/dc/dml/dml_wrapper_translation.c | 284 +++
drivers/gpu/drm/amd/display/dc/dsc/dc_dsc.c | 8 +
.../gpu/drm/amd/display/dc/inc/dml_wrapper.h | 34 +
drivers/gpu/drm/amd/display/dc/inc/hw/dsc.h | 3 +
.../amd/display/dc/inc/hw/stream_encoder.h | 4 +
.../amd/display/dc/inc/hw/timing_generator.h | 2 +
drivers/gpu/drm/amd/display/dmub/dmub_srv.h | 1 +
.../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 18 +-
.../gpu/drm/amd/display/dmub/src/dmub_srv.c | 9 +-
.../amd/display/include/ddc_service_types.h | 1 +
38 files changed, 2599 insertions(+), 31 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/dml/dml_wrapper.c
create mode 100644 drivers/gpu/drm/amd/display/dc/dml/dml_wrapper_translation.c
create mode 100644 drivers/gpu/drm/amd/display/dc/inc/dml_wrapper.h
--
2.25.1
^ permalink raw reply [flat|nested] 16+ messages in thread