[PATCH 1/3] drm/amd/pm: Disable MCLK switching on SI at high pixel clocks

["Timur Kristóf" <timur.kristof@gmail.com>]

On various SI GPUs, a flickering can be observed near the bottom
edge of the screen when using a single 4K 60Hz monitor over DP.
Disabling MCLK switching works around this problem.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
---
 drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
index cf9932e68055..3a9522c17fee 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
@@ -3500,6 +3500,11 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev,
 	 * for these GPUs to calculate bandwidth requirements.
 	 */
 	if (high_pixelclock_count) {
+		/* Work around flickering lines at the bottom edge
+		 * of the screen when using a single 4K 60Hz monitor.
+		 */
+		disable_mclk_switching = true;
+
 		/* On Oland, we observe some flickering when two 4K 60Hz
 		 * displays are connected, possibly because voltage is too low.
 		 * Raise the voltage by requiring a higher SCLK.
-- 
2.51.0