[PATCH net-next v3 00/15] gve: AdminQ mode related refactors

[PATCH net-next v3 00/15] gve: AdminQ mode related refactors

[Harshitha Ramamurthy]

This series is preparing the driver for the addition of a new control
plane mode(MailboxQ) by commonizing and reusing as much code as possible.
MailboxQ is a new control plane infrastructure which uses mailbox queues.
This is a new control plane to communicate with the device when the driver
is running on bare-metal instances as well as newer versions of the device.

This series contains 2 main changes to the gve driver's existing control
plane(AdminQ):
1) refactor some initialization/teardown path methods to make it work for
   both control planes.
2) add gve_ctrl_ops structure to the driver for various control plane
   operations

The refactors are mainly around the init, reset and recover paths so that
functionalities could be moved into the control ops like 'set_num_queues',
'set_num_ntfy_blks' etc.

This patch series only sets the control ops for AdminQ mode. This is
intended as a preparation for adding MailboxQ mode in upcoming series
which will add the new control plane infrastructure and then introduce
the corresponding control ops for MailboxQ mode.

The entire list of future patches can be found here for reference:
https://github.com/hramamurthy12/linux/commits/gve-mailbox-queues/

Changes in v3:
- Fix driver compatibility verification in the reset and recovery paths (patches 2, 8).
- Mark gve_adminq_get_device_properties() with __maybe_unused ahead of its usage (patch 7).
- Refine error handling and resource cleanup in reset, probe, and queue creation paths (patches 8, 9, 11, 14).
- Keep IRQ doorbell allocation/release in control plane resource helpers (patch 12).
- Minor fixes: fix TOCTOU issue for link speed, correct kdoc comments, and remove redundant teardown calls (patches 4, 11, 15). 
- v2: https://lore.kernel.org/netdev/20260602235900.3050782-1-hramamurthy@google.com/

Changes in v2:
- Rebased against latest net-next to resolve apply failure for patch 5
- Fixed a few typos in commit messages of patch 9 and 14
- Fixed a kdoc warning in patch 9
- v1: https://lore.kernel.org/netdev/20260601175437.3767283-1-hramamurthy@google.com/

Harshitha Ramamurthy (9):
  gve: don't pass in unused parameter to gve_adminq_free
  gve: refactor initialization with helper functions
  gve: add a few helper functions to set device properties
  gve: add struct gve_device_info to hold device properties
  gve: introduce control plane operations structure
  gve: introduce ctrl ops to set vectors and Qs
  gve: introduce gve_adminq_get_device_properties()
  gve: refactor gve_init_priv for reset path
  gve: add ctrl ops to for queue operations

Joshua Washington (6):
  gve: simplify reset logic
  gve: add gve_ctrl_ops for gve initialization/teardown sequences
  gve: split up notify block allocation and setup paths
  gve: introduce new methods to handle IRQ doorbells
  gve: setup and teardown management interrupts
  gve: add link status/speed ctrl ops

 drivers/net/ethernet/google/gve/gve.h         |  88 +-
 drivers/net/ethernet/google/gve/gve_adminq.c  | 432 ++++++--
 drivers/net/ethernet/google/gve/gve_adminq.h  |  25 +-
 drivers/net/ethernet/google/gve/gve_dqo.h     |   2 +-
 drivers/net/ethernet/google/gve/gve_ethtool.c |   5 +-
 .../net/ethernet/google/gve/gve_flow_rule.c   |  15 +-
 drivers/net/ethernet/google/gve/gve_main.c    | 936 +++++++++---------
 7 files changed, 947 insertions(+), 556 deletions(-)

-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 01/15] gve: don't pass in unused parameter to gve_adminq_free

[Harshitha Ramamurthy]

Clean up gve_adminq_free to not take in an unused parameter.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
 drivers/net/ethernet/google/gve/gve_adminq.c | 2 +-
 drivers/net/ethernet/google/gve/gve_adminq.h | 2 +-
 drivers/net/ethernet/google/gve/gve_main.c   | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 08587bf40ed4..70ffed8b52c3 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -385,7 +385,7 @@ void gve_adminq_release(struct gve_priv *priv)
 	gve_clear_admin_queue_ok(priv);
 }
 
-void gve_adminq_free(struct device *dev, struct gve_priv *priv)
+void gve_adminq_free(struct gve_priv *priv)
 {
 	if (!gve_get_admin_queue_ok(priv))
 		return;
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 22a74b6aa17e..8e80f36116ec 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -620,7 +620,7 @@ union gve_adminq_command {
 static_assert(sizeof(union gve_adminq_command) == 64);
 
 int gve_adminq_alloc(struct device *dev, struct gve_priv *priv);
-void gve_adminq_free(struct device *dev, struct gve_priv *priv);
+void gve_adminq_free(struct gve_priv *priv);
 void gve_adminq_release(struct gve_priv *priv);
 int gve_adminq_describe_device(struct gve_priv *priv);
 int gve_adminq_configure_device_resources(struct gve_priv *priv,
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index e4d78ae52daf..30bf6df4ebc5 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2506,14 +2506,14 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 	bitmap_free(priv->xsk_pools);
 	priv->xsk_pools = NULL;
 err:
-	gve_adminq_free(&priv->pdev->dev, priv);
+	gve_adminq_free(priv);
 	return err;
 }
 
 static void gve_teardown_priv_resources(struct gve_priv *priv)
 {
 	gve_teardown_device_resources(priv);
-	gve_adminq_free(&priv->pdev->dev, priv);
+	gve_adminq_free(priv);
 	bitmap_free(priv->xsk_pools);
 	priv->xsk_pools = NULL;
 }
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 02/15] gve: refactor initialization with helper functions

[Harshitha Ramamurthy]

In the interest of commonizing code, refactor gve_probe()
and gve_init_priv() with a few helper functions that can
be expanded and utilized in upcoming patches that add the
mailbox ABI to the driver. The helper functions are:

- gve_set_num_ntfy_blks()
- gve_set_num_queues()

Reorder code to combine lines that accomplish a similar objective
like setting defaults. Move setting HW-GRO and UDP GSO support out
of an Adminq method into gve_init_priv().

These changes are just code movement, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
- ensure to call verify driver compatibility in reset path

 drivers/net/ethernet/google/gve/gve_adminq.c |   8 --
 drivers/net/ethernet/google/gve/gve_main.c   | 104 +++++++++++--------
 2 files changed, 63 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 70ffed8b52c3..dfeabddfb396 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1117,14 +1117,6 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 
 	gve_set_default_rss_sizes(priv);
 
-	/* DQO supports HW-GRO and UDP_GSO */
-	if (gve_is_dqo(priv)) {
-		u64 additional_features = NETIF_F_GRO_HW | NETIF_F_GSO_UDP_L4;
-
-		priv->dev->hw_features |= additional_features;
-		priv->dev->features |= additional_features;
-	}
-
 	priv->max_registered_pages =
 				be64_to_cpu(descriptor->max_registered_pages);
 	mtu = be16_to_cpu(descriptor->mtu);
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 30bf6df4ebc5..6510aea62b92 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2398,9 +2398,54 @@ static const struct xdp_metadata_ops gve_xdp_metadata_ops = {
 	.xmo_rx_timestamp	= gve_xdp_rx_timestamp,
 };
 
-static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
+static int gve_set_num_ntfy_blks(struct gve_priv *priv)
 {
 	int num_ntfy;
+
+	num_ntfy = pci_msix_vec_count(priv->pdev);
+	if (num_ntfy <= 0) {
+		dev_err(&priv->pdev->dev,
+			"could not count MSI-x vectors: err=%d\n", num_ntfy);
+		return num_ntfy;
+	} else if (num_ntfy < GVE_MIN_MSIX) {
+		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
+			GVE_MIN_MSIX, num_ntfy);
+		return -EINVAL;
+	}
+
+	/* gvnic has one Notification Block per MSI-x vector, except for the
+	 * management vector
+	 */
+	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
+	priv->mgmt_msix_idx = priv->num_ntfy_blks;
+
+	return 0;
+}
+
+static void gve_set_num_queues(struct gve_priv *priv)
+{
+	priv->tx_cfg.max_queues =
+		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
+	priv->rx_cfg.max_queues =
+		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
+
+	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
+	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
+	if (priv->default_num_queues > 0) {
+		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
+						priv->tx_cfg.num_queues);
+		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
+						priv->rx_cfg.num_queues);
+	}
+
+	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
+		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
+	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
+		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
+}
+
+static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
+{
 	int err;
 
 	/* Set up the adminq */
@@ -2431,57 +2476,34 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 			"Could not get device information: err=%d\n", err);
 		goto err;
 	}
-	priv->dev->mtu = priv->dev->max_mtu;
-	num_ntfy = pci_msix_vec_count(priv->pdev);
-	if (num_ntfy <= 0) {
+
+	err = gve_set_num_ntfy_blks(priv);
+	if (err) {
 		dev_err(&priv->pdev->dev,
-			"could not count MSI-x vectors: err=%d\n", num_ntfy);
-		err = num_ntfy;
-		goto err;
-	} else if (num_ntfy < GVE_MIN_MSIX) {
-		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
-			GVE_MIN_MSIX, num_ntfy);
-		err = -EINVAL;
+			"Could not setup notify blocks: err=%d\n", err);
 		goto err;
 	}
 
-	/* Big TCP is only supported on DQO */
-	if (!gve_is_gqi(priv))
-		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
-
-	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
-	/* gvnic has one Notification Block per MSI-x vector, except for the
-	 * management vector
-	 */
-	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
-	priv->mgmt_msix_idx = priv->num_ntfy_blks;
-	priv->numa_node = dev_to_node(&priv->pdev->dev);
-
-	priv->tx_cfg.max_queues =
-		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
-	priv->rx_cfg.max_queues =
-		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
+	gve_set_num_queues(priv);
 
-	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
-	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
-	if (priv->default_num_queues > 0) {
-		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
-						priv->tx_cfg.num_queues);
-		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
-						priv->rx_cfg.num_queues);
-	}
-	priv->tx_cfg.num_xdp_queues = 0;
+	if (gve_is_dqo(priv)) {
+		/* DQO supports HW-GRO and UDP_GSO */
+		u64 additional_features = NETIF_F_GRO_HW | NETIF_F_GSO_UDP_L4;
 
-	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
-		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
-	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
-		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
+		priv->dev->hw_features |= additional_features;
+		priv->dev->features |= additional_features;
 
-	if (!gve_is_gqi(priv)) {
 		priv->tx_coalesce_usecs = GVE_TX_IRQ_RATELIMIT_US_DQO;
 		priv->rx_coalesce_usecs = GVE_RX_IRQ_RATELIMIT_US_DQO;
+
+		/* Big TCP is only supported on DQO */
+		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
 	}
 
+	priv->dev->mtu = priv->dev->max_mtu;
+	priv->numa_node = dev_to_node(&priv->pdev->dev);
+	priv->tx_cfg.num_xdp_queues = 0;
+	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
 	priv->ts_config.tx_type = HWTSTAMP_TX_OFF;
 	priv->ts_config.rx_filter = HWTSTAMP_FILTER_NONE;
 
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 03/15] gve: add a few helper functions to set device properties

[Harshitha Ramamurthy]

For the mailbox ABI, device properties will come from a different
source compared to the AdminQ mode. To accommodate the new source
when the mailbox ABI is added, add a few helper functions to set a
few device properties. Those functions are:

- gve_set_queue_properties() to set no. of pages for QPL mode and
  number of queues in general
- gve_set_mtu()
- gve_set_mac()

This is just code movement, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
 drivers/net/ethernet/google/gve/gve_adminq.c | 38 +++-------------
 drivers/net/ethernet/google/gve/gve_adminq.h |  6 +++
 drivers/net/ethernet/google/gve/gve_main.c   | 46 ++++++++++++++++++++
 3 files changed, 59 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index dfeabddfb396..2ae15289e2c8 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -920,19 +920,6 @@ int gve_adminq_destroy_rx_queues(struct gve_priv *priv, u32 num_queues)
 	return err;
 }
 
-static void gve_set_default_desc_cnt(struct gve_priv *priv,
-			const struct gve_device_descriptor *descriptor)
-{
-	priv->tx_desc_cnt = be16_to_cpu(descriptor->tx_queue_entries);
-	priv->rx_desc_cnt = be16_to_cpu(descriptor->rx_queue_entries);
-
-	/* set default ranges */
-	priv->max_tx_desc_cnt = priv->tx_desc_cnt;
-	priv->max_rx_desc_cnt = priv->rx_desc_cnt;
-	priv->min_tx_desc_cnt = priv->tx_desc_cnt;
-	priv->min_rx_desc_cnt = priv->rx_desc_cnt;
-}
-
 static void gve_set_default_rss_sizes(struct gve_priv *priv)
 {
 	if (!gve_is_gqi(priv)) {
@@ -1049,8 +1036,6 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	union gve_adminq_command cmd;
 	dma_addr_t descriptor_bus;
 	int err = 0;
-	u8 *mac;
-	u16 mtu;
 
 	memset(&cmd, 0, sizeof(cmd));
 	descriptor = dma_pool_alloc(priv->adminq_pool, GFP_KERNEL,
@@ -1112,26 +1097,17 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 			 "Driver is running with GQI QPL queue format.\n");
 	}
 
-	/* set default descriptor counts */
-	gve_set_default_desc_cnt(priv, descriptor);
-
 	gve_set_default_rss_sizes(priv);
 
-	priv->max_registered_pages =
-				be64_to_cpu(descriptor->max_registered_pages);
-	mtu = be16_to_cpu(descriptor->mtu);
-	if (mtu < ETH_MIN_MTU) {
-		dev_err(&priv->pdev->dev, "MTU %d below minimum MTU\n", mtu);
-		err = -EINVAL;
+	err = gve_set_mtu(priv, descriptor);
+	if (err)
 		goto free_device_descriptor;
-	}
-	priv->dev->max_mtu = mtu;
+
 	priv->num_event_counters = be16_to_cpu(descriptor->counters);
-	eth_hw_addr_set(priv->dev, descriptor->mac);
-	mac = descriptor->mac;
-	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", mac);
-	priv->tx_pages_per_qpl = be16_to_cpu(descriptor->tx_pages_per_qpl);
-	priv->default_num_queues = be16_to_cpu(descriptor->default_num_queues);
+
+	gve_set_mac(priv, descriptor);
+
+	gve_set_queue_properties(priv, descriptor);
 
 	gve_enable_supported_features(priv, supported_features_mask,
 				      dev_op_jumbo_frames, dev_op_dqo_qpl,
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 8e80f36116ec..580332df28db 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -656,5 +656,11 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 struct gve_ptype_lut;
 int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 				 struct gve_ptype_lut *ptype_lut);
+void gve_set_queue_properties(struct gve_priv *priv,
+			      struct gve_device_descriptor *descriptor);
+int gve_set_mtu(struct gve_priv *priv,
+		struct gve_device_descriptor *descriptor);
+void gve_set_mac(struct gve_priv *priv,
+		 struct gve_device_descriptor *descriptor);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 6510aea62b92..e818ebc6ec27 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2444,6 +2444,52 @@ static void gve_set_num_queues(struct gve_priv *priv)
 		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 }
 
+static void gve_set_default_desc_cnt(struct gve_priv *priv,
+				     const struct gve_device_descriptor *descriptor)
+{
+	priv->tx_desc_cnt = be16_to_cpu(descriptor->tx_queue_entries);
+	priv->rx_desc_cnt = be16_to_cpu(descriptor->rx_queue_entries);
+
+	/* set default ranges */
+	priv->max_tx_desc_cnt = priv->tx_desc_cnt;
+	priv->max_rx_desc_cnt = priv->rx_desc_cnt;
+	priv->min_tx_desc_cnt = priv->tx_desc_cnt;
+	priv->min_rx_desc_cnt = priv->rx_desc_cnt;
+}
+
+void gve_set_queue_properties(struct gve_priv *priv,
+			      struct gve_device_descriptor *descriptor)
+{
+	/* set default descriptor counts */
+	gve_set_default_desc_cnt(priv, descriptor);
+
+	priv->max_registered_pages = be64_to_cpu(descriptor->max_registered_pages);
+	priv->tx_pages_per_qpl = be16_to_cpu(descriptor->tx_pages_per_qpl);
+	priv->default_num_queues = be16_to_cpu(descriptor->default_num_queues);
+}
+
+int gve_set_mtu(struct gve_priv *priv,
+		struct gve_device_descriptor *descriptor)
+{
+	u16 mtu;
+
+	mtu = be16_to_cpu(descriptor->mtu);
+	if (mtu < ETH_MIN_MTU) {
+		dev_err(&priv->pdev->dev, "MTU %d below minimum MTU\n", mtu);
+		return -EINVAL;
+	}
+	priv->dev->max_mtu = mtu;
+
+	return 0;
+}
+
+void gve_set_mac(struct gve_priv *priv,
+		 struct gve_device_descriptor *descriptor)
+{
+	eth_hw_addr_set(priv->dev, descriptor->mac);
+	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", descriptor->mac);
+}
+
 static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 {
 	int err;
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 04/15] gve: add struct gve_device_info to hold device properties

[Harshitha Ramamurthy]

In the current AdminQ mode, device properties are written into
struct gve_device_descriptor that is allocated in shared memory
between the driver and device. In the upcoming MailboxQ mode,
these properties will be returned in the response of a mailbox
message. Hence, add struct gve_device_info as the structure that
holds all the properties that are negotiated with the device in
either mode.

Change the AdminQ mode method gve_adminq_describe_device()
and its children to fill up device information into this newly
introduced struct gve_device_info. Move a few helper functions
and code that set device properties in the priv structure into
gve_init_priv(). So now gve_init_priv() calls/does the following:

- gve_set_mtu()
- gve_set_mac()
- gve_set_queue_properties()
- gve_set_buf_sizes()
- set flow steering and RSS properties
- set other priv properties

When MailboxQ support is added, device information will be filled
into the same structure and the same gve_init_priv() path would be
used to set device properties to ensure common code reusage.

These changes are refactors only, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
- Read default_min_ring_size from device info instead of priv

 drivers/net/ethernet/google/gve/gve.h        |  29 +++++
 drivers/net/ethernet/google/gve/gve_adminq.c | 115 +++++++++++--------
 drivers/net/ethernet/google/gve/gve_adminq.h |   6 -
 drivers/net/ethernet/google/gve/gve_main.c   | 101 +++++++++++-----
 4 files changed, 170 insertions(+), 81 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index c280ff35ee77..021adb9108df 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -797,6 +797,34 @@ struct gve_ptp {
 	struct gve_priv *priv;
 };
 
+struct gve_device_info {
+	enum gve_queue_format queue_format;
+	u16 default_tx_queues;
+	u16 default_rx_queues;
+	u16 max_tx_queues;
+	u16 max_rx_queues;
+	u16 default_tx_ring_size;
+	u16 default_rx_ring_size;
+	u16 max_tx_ring_size;
+	u16 max_rx_ring_size;
+	u16 min_tx_ring_size;
+	u16 min_rx_ring_size;
+	u16 max_mtu;
+	u8 mac[ETH_ALEN];
+	u16 max_rx_buffer_size;
+	u16 header_buf_size;
+	u32 max_flow_rules;
+	u16 rss_key_size;
+	u16 rss_lut_size;
+	u16 tx_pages_per_qpl;
+	u16 num_event_counters;
+	u64 max_registered_pages;
+	bool default_min_ring_size;
+	bool nic_timestamp_supported;
+	bool modify_ring_size_enabled;
+	bool cache_rss_config;
+};
+
 struct gve_priv {
 	struct net_device *dev;
 	struct gve_tx_ring *tx; /* array of tx_cfg.num_queues */
@@ -929,6 +957,7 @@ struct gve_priv {
 	struct gve_nic_ts_report *nic_ts_report;
 	dma_addr_t nic_ts_report_bus;
 	u64 last_sync_nic_counter; /* Clock counter from last NIC TS report */
+	struct gve_device_info device_info;
 };
 
 enum gve_service_task_flags_bit {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 2ae15289e2c8..bb18e5af958b 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -70,7 +70,7 @@ void gve_parse_device_option(struct gve_priv *priv,
 
 		dev_info(&priv->pdev->dev,
 			 "Gqi raw addressing device option enabled.\n");
-		priv->queue_format = GVE_GQI_RDA_FORMAT;
+		priv->device_info.queue_format = GVE_GQI_RDA_FORMAT;
 		break;
 	case GVE_DEV_OPT_ID_GQI_RDA:
 		if (option_length < sizeof(**dev_op_gqi_rda) ||
@@ -190,7 +190,7 @@ void gve_parse_device_option(struct gve_priv *priv,
 
 		/* device has not provided min ring size */
 		if (option_length == GVE_DEVICE_OPTION_NO_MIN_RING_SIZE)
-			priv->default_min_ring_size = true;
+			priv->device_info.default_min_ring_size = true;
 		break;
 	case GVE_DEV_OPT_ID_FLOW_STEERING:
 		if (option_length < sizeof(**dev_op_flow_steering) ||
@@ -922,10 +922,13 @@ int gve_adminq_destroy_rx_queues(struct gve_priv *priv, u32 num_queues)
 
 static void gve_set_default_rss_sizes(struct gve_priv *priv)
 {
-	if (!gve_is_gqi(priv)) {
-		priv->rss_key_size = GVE_RSS_KEY_SIZE;
-		priv->rss_lut_size = GVE_RSS_INDIR_SIZE;
-		priv->cache_rss_config = true;
+	struct gve_device_info *device_info = &priv->device_info;
+
+	if (device_info->queue_format == GVE_DQO_RDA_FORMAT ||
+	    device_info->queue_format == GVE_DQO_QPL_FORMAT) {
+		device_info->rss_key_size = GVE_RSS_KEY_SIZE;
+		device_info->rss_lut_size = GVE_RSS_INDIR_SIZE;
+		device_info->cache_rss_config = true;
 	}
 }
 
@@ -946,77 +949,105 @@ static void gve_enable_supported_features(struct gve_priv *priv,
 					  const struct gve_device_option_modify_ring
 					  *dev_op_modify_ring)
 {
+	struct gve_device_info *info = &priv->device_info;
+
 	/* Before control reaches this point, the page-size-capped max MTU from
 	 * the gve_device_descriptor field has already been stored in
-	 * priv->dev->max_mtu. We overwrite it with the true max MTU below.
+	 * device_info->max_mtu. We overwrite it with the true max MTU below.
 	 */
 	if (dev_op_jumbo_frames &&
 	    (supported_features_mask & GVE_SUP_JUMBO_FRAMES_MASK)) {
 		dev_info(&priv->pdev->dev,
 			 "JUMBO FRAMES device option enabled.\n");
-		priv->dev->max_mtu = be16_to_cpu(dev_op_jumbo_frames->max_mtu);
+		info->max_mtu = be16_to_cpu(dev_op_jumbo_frames->max_mtu);
 	}
 
 	if (dev_op_buffer_sizes &&
 	    (supported_features_mask & GVE_SUP_BUFFER_SIZES_MASK)) {
-		priv->max_rx_buffer_size =
+		info->max_rx_buffer_size =
 			be16_to_cpu(dev_op_buffer_sizes->packet_buffer_size);
-		priv->header_buf_size =
+		info->header_buf_size =
 			be16_to_cpu(dev_op_buffer_sizes->header_buffer_size);
 		dev_info(&priv->pdev->dev,
 			 "BUFFER SIZES device option enabled with max_rx_buffer_size of %u, header_buf_size of %u.\n",
-			 priv->max_rx_buffer_size, priv->header_buf_size);
-		if (gve_is_dqo(priv) &&
-		    priv->max_rx_buffer_size > GVE_DEFAULT_RX_BUFFER_SIZE)
-			priv->rx_cfg.packet_buffer_size =
-				priv->max_rx_buffer_size;
+			 info->max_rx_buffer_size, info->header_buf_size);
 	}
 
 	/* Read and store ring size ranges given by device */
 	if (dev_op_modify_ring &&
 	    (supported_features_mask & GVE_SUP_MODIFY_RING_MASK)) {
-		priv->modify_ring_size_enabled = true;
-		priv->max_rx_desc_cnt =
+		info->modify_ring_size_enabled = true;
+		info->max_rx_ring_size =
 			be16_to_cpu(dev_op_modify_ring->max_rx_ring_size);
-		priv->max_tx_desc_cnt =
+		info->max_tx_ring_size =
 			be16_to_cpu(dev_op_modify_ring->max_tx_ring_size);
-		if (priv->default_min_ring_size) {
+		if (info->default_min_ring_size) {
 			/* If device hasn't provided minimums, use default minimums */
-			priv->min_tx_desc_cnt = GVE_DEFAULT_MIN_TX_RING_SIZE;
-			priv->min_rx_desc_cnt = GVE_DEFAULT_MIN_RX_RING_SIZE;
+			info->min_tx_ring_size = GVE_DEFAULT_MIN_TX_RING_SIZE;
+			info->min_rx_ring_size = GVE_DEFAULT_MIN_RX_RING_SIZE;
 		} else {
-			priv->min_rx_desc_cnt = be16_to_cpu(dev_op_modify_ring->min_rx_ring_size);
-			priv->min_tx_desc_cnt = be16_to_cpu(dev_op_modify_ring->min_tx_ring_size);
+			info->min_rx_ring_size =
+				be16_to_cpu(dev_op_modify_ring->min_rx_ring_size);
+			info->min_tx_ring_size =
+				be16_to_cpu(dev_op_modify_ring->min_tx_ring_size);
 		}
 	}
 
 	if (dev_op_flow_steering &&
 	    (supported_features_mask & GVE_SUP_FLOW_STEERING_MASK)) {
 		if (dev_op_flow_steering->max_flow_rules) {
-			priv->max_flow_rules =
+			info->max_flow_rules =
 				be32_to_cpu(dev_op_flow_steering->max_flow_rules);
-			priv->dev->hw_features |= NETIF_F_NTUPLE;
 			dev_info(&priv->pdev->dev,
 				 "FLOW STEERING device option enabled with max rule limit of %u.\n",
-				 priv->max_flow_rules);
+				 info->max_flow_rules);
 		}
 	}
 
 	if (dev_op_rss_config &&
 	    (supported_features_mask & GVE_SUP_RSS_CONFIG_MASK)) {
-		priv->rss_key_size =
+		info->rss_key_size =
 			be16_to_cpu(dev_op_rss_config->hash_key_size);
-		priv->rss_lut_size =
+		info->rss_lut_size =
 			be16_to_cpu(dev_op_rss_config->hash_lut_size);
-		priv->cache_rss_config = false;
+		info->cache_rss_config = false;
 		dev_dbg(&priv->pdev->dev,
 			"RSS device option enabled with key size of %u, lut size of %u.\n",
-			priv->rss_key_size, priv->rss_lut_size);
+			info->rss_key_size, info->rss_lut_size);
 	}
 
 	if (dev_op_nic_timestamp &&
 	    (supported_features_mask & GVE_SUP_NIC_TIMESTAMP_MASK))
-		priv->nic_timestamp_supported = true;
+		info->nic_timestamp_supported = true;
+}
+
+static void gve_fill_device_info(struct gve_priv *priv,
+				 struct gve_device_descriptor *descriptor)
+{
+	struct gve_device_info *device_info = &priv->device_info;
+	u16 default_num_queues;
+
+	device_info->tx_pages_per_qpl =
+				be16_to_cpu(descriptor->tx_pages_per_qpl);
+	device_info->max_registered_pages =
+				be64_to_cpu(descriptor->max_registered_pages);
+	device_info->num_event_counters = be16_to_cpu(descriptor->counters);
+	ether_addr_copy(device_info->mac, descriptor->mac);
+	device_info->max_mtu =  be16_to_cpu(descriptor->mtu);
+
+	default_num_queues = be16_to_cpu(descriptor->default_num_queues);
+	device_info->default_tx_queues = default_num_queues;
+	device_info->default_rx_queues = default_num_queues;
+	device_info->default_tx_ring_size =
+				be16_to_cpu(descriptor->tx_queue_entries);
+	device_info->default_rx_ring_size =
+				be16_to_cpu(descriptor->rx_queue_entries);
+
+	/* set default ranges */
+	device_info->max_tx_ring_size = device_info->default_tx_ring_size;
+	device_info->max_rx_ring_size = device_info->default_rx_ring_size;
+	device_info->min_tx_ring_size = device_info->default_tx_ring_size;
+	device_info->min_rx_ring_size = device_info->default_rx_ring_size;
 }
 
 int gve_adminq_describe_device(struct gve_priv *priv)
@@ -1027,6 +1058,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	struct gve_device_option_jumbo_frames *dev_op_jumbo_frames = NULL;
 	struct gve_device_option_modify_ring *dev_op_modify_ring = NULL;
 	struct gve_device_option_rss_config *dev_op_rss_config = NULL;
+	struct gve_device_info *device_info = &priv->device_info;
 	struct gve_device_option_gqi_rda *dev_op_gqi_rda = NULL;
 	struct gve_device_option_gqi_qpl *dev_op_gqi_qpl = NULL;
 	struct gve_device_option_dqo_rda *dev_op_dqo_rda = NULL;
@@ -1070,26 +1102,26 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	 * DqoRda, DqoQpl, GqiRda, GqiQpl. Use GqiQpl as default.
 	 */
 	if (dev_op_dqo_rda) {
-		priv->queue_format = GVE_DQO_RDA_FORMAT;
+		device_info->queue_format = GVE_DQO_RDA_FORMAT;
 		dev_info(&priv->pdev->dev,
 			 "Driver is running with DQO RDA queue format.\n");
 		supported_features_mask =
 			be32_to_cpu(dev_op_dqo_rda->supported_features_mask);
 	} else if (dev_op_dqo_qpl) {
-		priv->queue_format = GVE_DQO_QPL_FORMAT;
+		device_info->queue_format = GVE_DQO_QPL_FORMAT;
 		supported_features_mask =
 			be32_to_cpu(dev_op_dqo_qpl->supported_features_mask);
 	}  else if (dev_op_gqi_rda) {
-		priv->queue_format = GVE_GQI_RDA_FORMAT;
+		device_info->queue_format = GVE_GQI_RDA_FORMAT;
 		dev_info(&priv->pdev->dev,
 			 "Driver is running with GQI RDA queue format.\n");
 		supported_features_mask =
 			be32_to_cpu(dev_op_gqi_rda->supported_features_mask);
-	} else if (priv->queue_format == GVE_GQI_RDA_FORMAT) {
+	} else if (device_info->queue_format == GVE_GQI_RDA_FORMAT) {
 		dev_info(&priv->pdev->dev,
 			 "Driver is running with GQI RDA queue format.\n");
 	} else {
-		priv->queue_format = GVE_GQI_QPL_FORMAT;
+		device_info->queue_format = GVE_GQI_QPL_FORMAT;
 		if (dev_op_gqi_qpl)
 			supported_features_mask =
 				be32_to_cpu(dev_op_gqi_qpl->supported_features_mask);
@@ -1097,18 +1129,9 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 			 "Driver is running with GQI QPL queue format.\n");
 	}
 
+	gve_fill_device_info(priv, descriptor);
 	gve_set_default_rss_sizes(priv);
 
-	err = gve_set_mtu(priv, descriptor);
-	if (err)
-		goto free_device_descriptor;
-
-	priv->num_event_counters = be16_to_cpu(descriptor->counters);
-
-	gve_set_mac(priv, descriptor);
-
-	gve_set_queue_properties(priv, descriptor);
-
 	gve_enable_supported_features(priv, supported_features_mask,
 				      dev_op_jumbo_frames, dev_op_dqo_qpl,
 				      dev_op_buffer_sizes, dev_op_flow_steering,
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 580332df28db..8e80f36116ec 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -656,11 +656,5 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 struct gve_ptype_lut;
 int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 				 struct gve_ptype_lut *ptype_lut);
-void gve_set_queue_properties(struct gve_priv *priv,
-			      struct gve_device_descriptor *descriptor);
-int gve_set_mtu(struct gve_priv *priv,
-		struct gve_device_descriptor *descriptor);
-void gve_set_mac(struct gve_priv *priv,
-		 struct gve_device_descriptor *descriptor);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index e818ebc6ec27..9a484fa15abe 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2424,6 +2424,8 @@ static int gve_set_num_ntfy_blks(struct gve_priv *priv)
 
 static void gve_set_num_queues(struct gve_priv *priv)
 {
+	struct gve_device_info *device_info = &priv->device_info;
+
 	priv->tx_cfg.max_queues =
 		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
 	priv->rx_cfg.max_queues =
@@ -2431,12 +2433,14 @@ static void gve_set_num_queues(struct gve_priv *priv)
 
 	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
 	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
-	if (priv->default_num_queues > 0) {
-		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
+	if (device_info->default_tx_queues > 0)
+		priv->tx_cfg.num_queues = min_t(int,
+						device_info->default_tx_queues,
 						priv->tx_cfg.num_queues);
-		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
+	if (device_info->default_rx_queues > 0)
+		priv->rx_cfg.num_queues = min_t(int,
+						device_info->default_rx_queues,
 						priv->rx_cfg.num_queues);
-	}
 
 	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
 		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
@@ -2444,54 +2448,69 @@ static void gve_set_num_queues(struct gve_priv *priv)
 		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 }
 
-static void gve_set_default_desc_cnt(struct gve_priv *priv,
-				     const struct gve_device_descriptor *descriptor)
+static void gve_set_desc_cnt(struct gve_priv *priv)
 {
-	priv->tx_desc_cnt = be16_to_cpu(descriptor->tx_queue_entries);
-	priv->rx_desc_cnt = be16_to_cpu(descriptor->rx_queue_entries);
+	struct gve_device_info *device_info = &priv->device_info;
 
-	/* set default ranges */
-	priv->max_tx_desc_cnt = priv->tx_desc_cnt;
-	priv->max_rx_desc_cnt = priv->rx_desc_cnt;
-	priv->min_tx_desc_cnt = priv->tx_desc_cnt;
-	priv->min_rx_desc_cnt = priv->rx_desc_cnt;
+	priv->tx_desc_cnt = device_info->default_tx_ring_size;
+	priv->rx_desc_cnt = device_info->default_rx_ring_size;
+	priv->max_tx_desc_cnt = device_info->max_tx_ring_size;
+	priv->max_rx_desc_cnt = device_info->max_rx_ring_size;
+	priv->min_tx_desc_cnt = device_info->min_tx_ring_size;
+	priv->min_rx_desc_cnt = device_info->min_rx_ring_size;
 }
 
-void gve_set_queue_properties(struct gve_priv *priv,
-			      struct gve_device_descriptor *descriptor)
+static void gve_set_queue_properties(struct gve_priv *priv)
 {
-	/* set default descriptor counts */
-	gve_set_default_desc_cnt(priv, descriptor);
+	struct gve_device_info *device_info = &priv->device_info;
 
-	priv->max_registered_pages = be64_to_cpu(descriptor->max_registered_pages);
-	priv->tx_pages_per_qpl = be16_to_cpu(descriptor->tx_pages_per_qpl);
-	priv->default_num_queues = be16_to_cpu(descriptor->default_num_queues);
+	gve_set_desc_cnt(priv);
+	priv->max_registered_pages = device_info->max_registered_pages;
+	priv->tx_pages_per_qpl = device_info->tx_pages_per_qpl;
 }
 
-int gve_set_mtu(struct gve_priv *priv,
-		struct gve_device_descriptor *descriptor)
+static int gve_set_mtu(struct gve_priv *priv)
 {
+	struct gve_device_info *device_info = &priv->device_info;
 	u16 mtu;
 
-	mtu = be16_to_cpu(descriptor->mtu);
+	mtu = device_info->max_mtu;
 	if (mtu < ETH_MIN_MTU) {
 		dev_err(&priv->pdev->dev, "MTU %d below minimum MTU\n", mtu);
 		return -EINVAL;
 	}
 	priv->dev->max_mtu = mtu;
+	priv->dev->mtu = priv->dev->max_mtu;
 
 	return 0;
 }
 
-void gve_set_mac(struct gve_priv *priv,
-		 struct gve_device_descriptor *descriptor)
+static void gve_set_mac(struct gve_priv *priv)
 {
-	eth_hw_addr_set(priv->dev, descriptor->mac);
-	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", descriptor->mac);
+	struct gve_device_info *device_info = &priv->device_info;
+
+	eth_hw_addr_set(priv->dev, device_info->mac);
+	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", device_info->mac);
+}
+
+static void gve_set_buf_sizes(struct gve_priv *priv)
+{
+	struct gve_device_info *device_info = &priv->device_info;
+
+	if (device_info->max_rx_buffer_size > priv->max_rx_buffer_size)
+		priv->max_rx_buffer_size = device_info->max_rx_buffer_size;
+
+	if (gve_is_dqo(priv) &&
+	    priv->max_rx_buffer_size > GVE_DEFAULT_RX_BUFFER_SIZE)
+		priv->rx_cfg.packet_buffer_size = priv->max_rx_buffer_size;
+
+	if (device_info->header_buf_size)
+		priv->header_buf_size = device_info->header_buf_size;
 }
 
 static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 {
+	struct gve_device_info *device_info = &priv->device_info;
 	int err;
 
 	/* Set up the adminq */
@@ -2514,7 +2533,7 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 	if (skip_describe_device)
 		goto setup_device;
 
-	priv->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
+	device_info->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
 	/* Get the initial information we need from the device */
 	err = gve_adminq_describe_device(priv);
 	if (err) {
@@ -2523,6 +2542,8 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		goto err;
 	}
 
+	priv->queue_format = priv->device_info.queue_format;
+
 	err = gve_set_num_ntfy_blks(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
@@ -2546,12 +2567,34 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
 	}
 
-	priv->dev->mtu = priv->dev->max_mtu;
+	if (gve_set_mtu(priv)) {
+		err = -EINVAL;
+		goto err;
+	}
+
+	priv->num_event_counters = device_info->num_event_counters;
+
+	gve_set_mac(priv);
+
+	gve_set_queue_properties(priv);
+	priv->modify_ring_size_enabled = device_info->modify_ring_size_enabled;
+
+	gve_set_buf_sizes(priv);
+
+	priv->max_flow_rules = device_info->max_flow_rules;
+	if (priv->max_flow_rules)
+		priv->dev->hw_features |= NETIF_F_NTUPLE;
+
+	priv->rss_key_size = device_info->rss_key_size;
+	priv->rss_lut_size = device_info->rss_lut_size;
+	priv->cache_rss_config = device_info->cache_rss_config;
+
 	priv->numa_node = dev_to_node(&priv->pdev->dev);
 	priv->tx_cfg.num_xdp_queues = 0;
 	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
 	priv->ts_config.tx_type = HWTSTAMP_TX_OFF;
 	priv->ts_config.rx_filter = HWTSTAMP_FILTER_NONE;
+	priv->nic_timestamp_supported = device_info->nic_timestamp_supported;
 
 setup_device:
 	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 05/15] gve: introduce control plane operations structure

[Harshitha Ramamurthy]

To abstract out the difference in implementation of control
plane operations between the existing Adminq ABI and the upcoming
Mailbox ABI, introduce a new gve_ctrl_ops structure which will
contain the basic operations. At probe, these ops will be set based
on the ABI and the corresponding ops will be called in relevant
places.

As of this patch, only Adminq ops are set. In future patches,
corresponding ops will be set for the new mailbox mode.

Implement a ctrl op to map/unmap the doorbell bar. Since this
functionality has moved to a control op, call this op after control
ops are set for AdminQ mode.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
 drivers/net/ethernet/google/gve/gve.h        | 11 ++++++
 drivers/net/ethernet/google/gve/gve_adminq.c | 21 ++++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h |  2 ++
 drivers/net/ethernet/google/gve/gve_main.c   | 36 +++++++++++---------
 4 files changed, 54 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 021adb9108df..56148ea3cfbf 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -825,6 +825,16 @@ struct gve_device_info {
 	bool cache_rss_config;
 };
 
+/**
+ * struct gve_ctrl_ops - Control plane operations structure
+ * @map_db_bar: Maps the doorbell BAR for the device and store in @priv.
+ * @unmap_db_bar: Unmaps the doorbell BAR previously mapped by @map_db_bar.
+ */
+struct gve_ctrl_ops {
+	int (*map_db_bar)(struct gve_priv *priv);
+	void (*unmap_db_bar)(struct gve_priv *priv);
+};
+
 struct gve_priv {
 	struct net_device *dev;
 	struct gve_tx_ring *tx; /* array of tx_cfg.num_queues */
@@ -958,6 +968,7 @@ struct gve_priv {
 	dma_addr_t nic_ts_report_bus;
 	u64 last_sync_nic_counter; /* Clock counter from last NIC TS report */
 	struct gve_device_info device_info;
+	const struct gve_ctrl_ops *ctrl_ops;
 };
 
 enum gve_service_task_flags_bit {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index bb18e5af958b..9c3ebdb547cf 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1591,3 +1591,24 @@ int gve_adminq_query_rss_config(struct gve_priv *priv, struct ethtool_rxfh_param
 	dma_pool_free(priv->adminq_pool, descriptor, descriptor_bus);
 	return err;
 }
+
+int gve_adminq_map_db_bar(struct gve_priv *priv)
+{
+	struct pci_dev *pdev = priv->pdev;
+	void __iomem *db_bar;
+
+	db_bar = pci_iomap(pdev, GVE_DOORBELL_BAR, 0);
+	if (!db_bar) {
+		dev_err(&pdev->dev, "Failed to map doorbell bar!\n");
+		return -ENOMEM;
+	}
+	priv->db_bar2 = db_bar;
+	return 0;
+}
+
+void gve_adminq_unmap_db_bar(struct gve_priv *priv)
+{
+	struct pci_dev *pdev = priv->pdev;
+
+	pci_iounmap(pdev, priv->db_bar2);
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 8e80f36116ec..2a184e051202 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -656,5 +656,7 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 struct gve_ptype_lut;
 int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 				 struct gve_ptype_lut *ptype_lut);
+int gve_adminq_map_db_bar(struct gve_priv *priv);
+void gve_adminq_unmap_db_bar(struct gve_priv *priv);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 9a484fa15abe..fff63b90dcbb 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2508,6 +2508,11 @@ static void gve_set_buf_sizes(struct gve_priv *priv)
 		priv->header_buf_size = device_info->header_buf_size;
 }
 
+static const struct gve_ctrl_ops gve_adminq_ops = {
+	.map_db_bar	 = gve_adminq_map_db_bar,
+	.unmap_db_bar	 = gve_adminq_unmap_db_bar,
+};
+
 static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 {
 	struct gve_device_info *device_info = &priv->device_info;
@@ -2905,7 +2910,6 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int max_tx_queues, max_rx_queues;
 	struct net_device *dev;
-	__be32 __iomem *db_bar;
 	struct gve_registers __iomem *reg_bar;
 	struct gve_priv *priv;
 	int err;
@@ -2933,13 +2937,6 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto abort_with_pci_region;
 	}
 
-	db_bar = pci_iomap(pdev, GVE_DOORBELL_BAR, 0);
-	if (!db_bar) {
-		dev_err(&pdev->dev, "Failed to map doorbell bar!\n");
-		err = -ENOMEM;
-		goto abort_with_reg_bar;
-	}
-
 	gve_write_version(&reg_bar->driver_version);
 	/* Get max queues to alloc etherdev */
 	max_tx_queues = ioread32be(&reg_bar->max_tx_queues);
@@ -2949,7 +2946,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!dev) {
 		dev_err(&pdev->dev, "could not allocate netdev\n");
 		err = -ENOMEM;
-		goto abort_with_db_bar;
+		goto abort_with_reg_bar;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	pci_set_drvdata(pdev, dev);
@@ -2981,19 +2978,27 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	priv->pdev = pdev;
 	priv->msg_enable = DEFAULT_MSG_LEVEL;
 	priv->reg_bar0 = reg_bar;
-	priv->db_bar2 = db_bar;
 	priv->service_task_flags = 0x0;
 	priv->state_flags = 0x0;
 	priv->ethtool_flags = 0x0;
 	priv->rx_cfg.packet_buffer_size = GVE_DEFAULT_RX_BUFFER_SIZE;
 	priv->max_rx_buffer_size = GVE_DEFAULT_RX_BUFFER_SIZE;
 
+	/* Set adminq ctrl ops */
+	priv->ctrl_ops = &gve_adminq_ops;
+
+	err = priv->ctrl_ops->map_db_bar(priv);
+	if (err) {
+		err = -ENOMEM;
+		goto abort_with_netdev;
+	}
+
 	gve_set_probe_in_progress(priv);
 	priv->gve_wq = alloc_ordered_workqueue("gve", 0);
 	if (!priv->gve_wq) {
 		dev_err(&pdev->dev, "Could not allocate workqueue");
 		err = -ENOMEM;
-		goto abort_with_netdev;
+		goto abort_with_unmap_db_bar;
 	}
 	INIT_WORK(&priv->service_task, gve_service_task);
 	INIT_WORK(&priv->stats_report_task, gve_stats_report_task);
@@ -3023,12 +3028,12 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 abort_with_wq:
 	destroy_workqueue(priv->gve_wq);
 
+abort_with_unmap_db_bar:
+	priv->ctrl_ops->unmap_db_bar(priv);
+
 abort_with_netdev:
 	free_netdev(dev);
 
-abort_with_db_bar:
-	pci_iounmap(pdev, db_bar);
-
 abort_with_reg_bar:
 	pci_iounmap(pdev, reg_bar);
 
@@ -3044,14 +3049,13 @@ static void gve_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct gve_priv *priv = netdev_priv(netdev);
-	__be32 __iomem *db_bar = priv->db_bar2;
 	void __iomem *reg_bar = priv->reg_bar0;
 
 	unregister_netdev(netdev);
 	gve_teardown_priv_resources(priv);
 	destroy_workqueue(priv->gve_wq);
+	priv->ctrl_ops->unmap_db_bar(priv);
 	free_netdev(netdev);
-	pci_iounmap(pdev, db_bar);
 	pci_iounmap(pdev, reg_bar);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 06/15] gve: introduce ctrl ops to set vectors and Qs

[Harshitha Ramamurthy]

Introduce following ctrl ops for Adminq mode. This change does
not introduce any functional change, just movement of code into
ops.

- set_num_queues to set maximum and default TX/RX queues in the
  alloc structures used in the initialization flow.
- set_num_ntfy_blks op to set number of vectors(ntfy_blks) in the
  initialization flow.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
 drivers/net/ethernet/google/gve/gve.h        |  6 ++
 drivers/net/ethernet/google/gve/gve_adminq.c | 45 ++++++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h |  2 +
 drivers/net/ethernet/google/gve/gve_main.c   | 64 +++-----------------
 4 files changed, 63 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 56148ea3cfbf..1bc5e32b6618 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -829,10 +829,16 @@ struct gve_device_info {
  * struct gve_ctrl_ops - Control plane operations structure
  * @map_db_bar: Maps the doorbell BAR for the device and store in @priv.
  * @unmap_db_bar: Unmaps the doorbell BAR previously mapped by @map_db_bar.
+ * @set_num_queues: Sets default and max TX/RX queues into allocation
+ *                  structures stored in @priv to be used during initialization.
+ * @set_num_ntfy_blks: Sets no. of vectors into @priv to be used during
+ *                     initialization.
  */
 struct gve_ctrl_ops {
 	int (*map_db_bar)(struct gve_priv *priv);
 	void (*unmap_db_bar)(struct gve_priv *priv);
+	void (*set_num_queues)(struct gve_priv *priv);
+	int (*set_num_ntfy_blks)(struct gve_priv *priv);
 };
 
 struct gve_priv {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 9c3ebdb547cf..1d9ae601cdeb 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1612,3 +1612,48 @@ void gve_adminq_unmap_db_bar(struct gve_priv *priv)
 
 	pci_iounmap(pdev, priv->db_bar2);
 }
+
+int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv)
+{
+	int num_ntfy;
+
+	num_ntfy = pci_msix_vec_count(priv->pdev);
+	if (num_ntfy <= 0) {
+		dev_err(&priv->pdev->dev,
+			"could not count MSI-x vectors: err=%d\n", num_ntfy);
+		return num_ntfy;
+	} else if (num_ntfy < GVE_MIN_MSIX) {
+		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
+			GVE_MIN_MSIX, num_ntfy);
+		return -EINVAL;
+	}
+
+	/* gvnic has one Notification Block per MSI-x vector, except for the
+	 * management vector
+	 */
+	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
+	priv->mgmt_msix_idx = priv->num_ntfy_blks;
+
+	return 0;
+}
+
+void gve_adminq_set_num_queues(struct gve_priv *priv)
+{
+	struct gve_device_info *device_info = &priv->device_info;
+
+	priv->tx_cfg.max_queues =
+		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
+	priv->rx_cfg.max_queues =
+		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
+
+	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
+	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
+	if (device_info->default_tx_queues > 0)
+		priv->tx_cfg.num_queues = min_t(int,
+						device_info->default_tx_queues,
+						priv->tx_cfg.num_queues);
+	if (device_info->default_rx_queues > 0)
+		priv->rx_cfg.num_queues = min_t(int,
+						device_info->default_rx_queues,
+						priv->rx_cfg.num_queues);
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 2a184e051202..52fe4a9f7b87 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -658,5 +658,7 @@ int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 				 struct gve_ptype_lut *ptype_lut);
 int gve_adminq_map_db_bar(struct gve_priv *priv);
 void gve_adminq_unmap_db_bar(struct gve_priv *priv);
+int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv);
+void gve_adminq_set_num_queues(struct gve_priv *priv);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index fff63b90dcbb..ce55f845a6f9 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2398,56 +2398,6 @@ static const struct xdp_metadata_ops gve_xdp_metadata_ops = {
 	.xmo_rx_timestamp	= gve_xdp_rx_timestamp,
 };
 
-static int gve_set_num_ntfy_blks(struct gve_priv *priv)
-{
-	int num_ntfy;
-
-	num_ntfy = pci_msix_vec_count(priv->pdev);
-	if (num_ntfy <= 0) {
-		dev_err(&priv->pdev->dev,
-			"could not count MSI-x vectors: err=%d\n", num_ntfy);
-		return num_ntfy;
-	} else if (num_ntfy < GVE_MIN_MSIX) {
-		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
-			GVE_MIN_MSIX, num_ntfy);
-		return -EINVAL;
-	}
-
-	/* gvnic has one Notification Block per MSI-x vector, except for the
-	 * management vector
-	 */
-	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
-	priv->mgmt_msix_idx = priv->num_ntfy_blks;
-
-	return 0;
-}
-
-static void gve_set_num_queues(struct gve_priv *priv)
-{
-	struct gve_device_info *device_info = &priv->device_info;
-
-	priv->tx_cfg.max_queues =
-		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
-	priv->rx_cfg.max_queues =
-		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
-
-	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
-	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
-	if (device_info->default_tx_queues > 0)
-		priv->tx_cfg.num_queues = min_t(int,
-						device_info->default_tx_queues,
-						priv->tx_cfg.num_queues);
-	if (device_info->default_rx_queues > 0)
-		priv->rx_cfg.num_queues = min_t(int,
-						device_info->default_rx_queues,
-						priv->rx_cfg.num_queues);
-
-	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
-		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
-	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
-		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
-}
-
 static void gve_set_desc_cnt(struct gve_priv *priv)
 {
 	struct gve_device_info *device_info = &priv->device_info;
@@ -2509,8 +2459,10 @@ static void gve_set_buf_sizes(struct gve_priv *priv)
 }
 
 static const struct gve_ctrl_ops gve_adminq_ops = {
-	.map_db_bar	 = gve_adminq_map_db_bar,
-	.unmap_db_bar	 = gve_adminq_unmap_db_bar,
+	.map_db_bar		= gve_adminq_map_db_bar,
+	.unmap_db_bar		= gve_adminq_unmap_db_bar,
+	.set_num_queues		= gve_adminq_set_num_queues,
+	.set_num_ntfy_blks	= gve_adminq_set_num_ntfy_blks,
 };
 
 static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
@@ -2549,14 +2501,18 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 
 	priv->queue_format = priv->device_info.queue_format;
 
-	err = gve_set_num_ntfy_blks(priv);
+	err = priv->ctrl_ops->set_num_ntfy_blks(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
 			"Could not setup notify blocks: err=%d\n", err);
 		goto err;
 	}
 
-	gve_set_num_queues(priv);
+	priv->ctrl_ops->set_num_queues(priv);
+	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
+		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
+	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
+		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 
 	if (gve_is_dqo(priv)) {
 		/* DQO supports HW-GRO and UDP_GSO */
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 07/15] gve: introduce gve_adminq_get_device_properties()

[Harshitha Ramamurthy]

Move driver compatibility verification from gve_main.c to gve_adminq.c as
gve_adminq_verify_driver_compatibility() and update gve_init_priv() to
call it.

Introduce gve_adminq_get_device_properties() which executes the first
two Adminq commands: VERIFY_DRIVER_COMPATIBILITY and DESCRIBE_DEVICE
so that this can be called during initialization. Mark it as unused
since it's going to be hooked into initialization in the following
patch.

This is just code movement, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes v3:
- move patch down so that the function is introduced just before usage
- mark function as maybe_unused
- update commit message

 drivers/net/ethernet/google/gve/gve.h        |  2 +
 drivers/net/ethernet/google/gve/gve_adminq.c | 66 ++++++++++++++++++--
 drivers/net/ethernet/google/gve/gve_adminq.h |  5 +-
 drivers/net/ethernet/google/gve/gve_main.c   | 46 +-------------
 4 files changed, 65 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 1bc5e32b6618..d6e7ab0649ac 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -16,6 +16,8 @@
 #include <linux/timer.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/u64_stats_sync.h>
+#include <linux/utsname.h>
+#include <linux/version.h>
 #include <net/page_pool/helpers.h>
 #include <net/xdp.h>
 
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 1d9ae601cdeb..66a3e774b7c4 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1143,6 +1143,27 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	return err;
 }
 
+int __maybe_unused gve_adminq_get_device_properties(struct gve_priv *priv)
+{
+	int err;
+
+	err = gve_adminq_verify_driver_compatibility(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Could not verify driver compatibility: err=%d\n", err);
+		return err;
+	}
+
+	/* Get the initial information we need from the device */
+	err = gve_adminq_describe_device(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Could not get device information: err=%d\n", err);
+		return err;
+	}
+	return 0;
+}
+
 int gve_adminq_register_page_list(struct gve_priv *priv,
 				  struct gve_queue_page_list *qpl)
 {
@@ -1205,20 +1226,53 @@ int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 	return gve_adminq_execute_cmd(priv, &cmd);
 }
 
-int gve_adminq_verify_driver_compatibility(struct gve_priv *priv,
-					   u64 driver_info_len,
-					   dma_addr_t driver_info_addr)
+int gve_adminq_verify_driver_compatibility(struct gve_priv *priv)
 {
+	struct gve_driver_info *driver_info;
 	union gve_adminq_command cmd;
+	dma_addr_t driver_info_bus;
+	int err;
+
+	driver_info = dma_alloc_coherent(&priv->pdev->dev,
+					 sizeof(struct gve_driver_info),
+					 &driver_info_bus, GFP_KERNEL);
+	if (!driver_info)
+		return -ENOMEM;
+
+	*driver_info = (struct gve_driver_info) {
+		.os_type = 1, /* Linux */
+		.os_version_major = cpu_to_be32(LINUX_VERSION_MAJOR),
+		.os_version_minor = cpu_to_be32(LINUX_VERSION_SUBLEVEL),
+		.os_version_sub = cpu_to_be32(LINUX_VERSION_PATCHLEVEL),
+		.driver_capability_flags = {
+			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS1),
+			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS2),
+			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS3),
+			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS4),
+		},
+	};
+	strscpy(driver_info->os_version_str1, utsname()->release,
+		sizeof(driver_info->os_version_str1));
+	strscpy(driver_info->os_version_str2, utsname()->version,
+		sizeof(driver_info->os_version_str2));
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.opcode = cpu_to_be32(GVE_ADMINQ_VERIFY_DRIVER_COMPATIBILITY);
 	cmd.verify_driver_compatibility = (struct gve_adminq_verify_driver_compatibility) {
-		.driver_info_len = cpu_to_be64(driver_info_len),
-		.driver_info_addr = cpu_to_be64(driver_info_addr),
+		.driver_info_len = cpu_to_be64(sizeof(struct gve_driver_info)),
+		.driver_info_addr = cpu_to_be64(driver_info_bus),
 	};
 
-	return gve_adminq_execute_cmd(priv, &cmd);
+	err = gve_adminq_execute_cmd(priv, &cmd);
+
+	/* It's ok if the device doesn't support this */
+	if (err == -EOPNOTSUPP)
+		err = 0;
+
+	dma_free_coherent(&priv->pdev->dev,
+			  sizeof(struct gve_driver_info),
+			  driver_info, driver_info_bus);
+	return err;
 }
 
 int gve_adminq_report_link_speed(struct gve_priv *priv)
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 52fe4a9f7b87..ac3ef9fd8d24 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -640,9 +640,8 @@ int gve_adminq_register_page_list(struct gve_priv *priv,
 int gve_adminq_unregister_page_list(struct gve_priv *priv, u32 page_list_id);
 int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 			    dma_addr_t stats_report_addr, u64 interval);
-int gve_adminq_verify_driver_compatibility(struct gve_priv *priv,
-					   u64 driver_info_len,
-					   dma_addr_t driver_info_addr);
+int gve_adminq_verify_driver_compatibility(struct gve_priv *priv);
+int gve_adminq_get_device_properties(struct gve_priv *priv);
 int gve_adminq_report_link_speed(struct gve_priv *priv);
 int gve_adminq_add_flow_rule(struct gve_priv *priv, struct gve_adminq_flow_rule *rule, u32 loc);
 int gve_adminq_del_flow_rule(struct gve_priv *priv, u32 loc);
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index ce55f845a6f9..0d308bde52c8 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -17,7 +17,6 @@
 #include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
-#include <linux/utsname.h>
 #include <linux/version.h>
 #include <net/netdev_queues.h>
 #include <net/sch_generic.h>
@@ -41,49 +40,6 @@ char gve_driver_name[] = "gve";
 const char gve_version_str[] = GVE_VERSION;
 static const char gve_version_prefix[] = GVE_VERSION_PREFIX;
 
-static int gve_verify_driver_compatibility(struct gve_priv *priv)
-{
-	int err;
-	struct gve_driver_info *driver_info;
-	dma_addr_t driver_info_bus;
-
-	driver_info = dma_alloc_coherent(&priv->pdev->dev,
-					 sizeof(struct gve_driver_info),
-					 &driver_info_bus, GFP_KERNEL);
-	if (!driver_info)
-		return -ENOMEM;
-
-	*driver_info = (struct gve_driver_info) {
-		.os_type = 1, /* Linux */
-		.os_version_major = cpu_to_be32(LINUX_VERSION_MAJOR),
-		.os_version_minor = cpu_to_be32(LINUX_VERSION_SUBLEVEL),
-		.os_version_sub = cpu_to_be32(LINUX_VERSION_PATCHLEVEL),
-		.driver_capability_flags = {
-			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS1),
-			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS2),
-			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS3),
-			cpu_to_be64(GVE_DRIVER_CAPABILITY_FLAGS4),
-		},
-	};
-	strscpy(driver_info->os_version_str1, utsname()->release,
-		sizeof(driver_info->os_version_str1));
-	strscpy(driver_info->os_version_str2, utsname()->version,
-		sizeof(driver_info->os_version_str2));
-
-	err = gve_adminq_verify_driver_compatibility(priv,
-						     sizeof(struct gve_driver_info),
-						     driver_info_bus);
-
-	/* It's ok if the device doesn't support this */
-	if (err == -EOPNOTSUPP)
-		err = 0;
-
-	dma_free_coherent(&priv->pdev->dev,
-			  sizeof(struct gve_driver_info),
-			  driver_info, driver_info_bus);
-	return err;
-}
-
 static netdev_features_t gve_features_check(struct sk_buff *skb,
 					    struct net_device *dev,
 					    netdev_features_t features)
@@ -2478,7 +2434,7 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		return err;
 	}
 
-	err = gve_verify_driver_compatibility(priv);
+	err = gve_adminq_verify_driver_compatibility(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
 			"Could not verify driver compatibility: err=%d\n", err);
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 08/15] gve: refactor gve_init_priv for reset path

[Harshitha Ramamurthy]

The driver does not need to renegotiate all properties with
the device on a reset since those should stay constant through
a reset. Hence change gve_init_priv() into a method that only
sets these properties into the priv structure and hence needs
to be only called once during gve_probe().

To achieve this end state of gve_init_priv(), do the following:
- introduce gve_adminq_init() which writes the driver version register
  and allocates the AdminQ and call it in gve_probe()
- call gve_adminq_get_device_properties() into gve_probe() to learn device
  properties
- introduce gve_setup_device() which deals with device setup logic and
  call it in gve_probe()
- resetting no. of registered pages is moved into gve_setup_device() since
  that needs to be reset every time queues are re-created.

With these changes, gve_adminq_get_device_properties() and
gve_init_priv() are only called once during gve_probe.
gve_reset_recovery() now calls targeted setup functions directly.

This prepares the driver to add mailbox mode's control plane
initialization and device properties negotiation in the same place
as is done in AdminQ mode in the upcoming patches when adding the
mailbox ABI.

These changes are only code movement, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
 - gve_reset_recovery also calls verify driver compatibility
 - don't free device resources if gve_open() fails in the reset path
 - move resetting no. of registered pages to gve_setup_device()

 drivers/net/ethernet/google/gve/gve.h        |   2 +
 drivers/net/ethernet/google/gve/gve_adminq.c |  12 +-
 drivers/net/ethernet/google/gve/gve_adminq.h |   2 +-
 drivers/net/ethernet/google/gve/gve_main.c   | 146 ++++++++++---------
 4 files changed, 95 insertions(+), 67 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index d6e7ab0649ac..143c666fcebd 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -1255,6 +1255,8 @@ static inline bool gve_is_clock_enabled(struct gve_priv *priv)
 	return priv->nic_ts_report;
 }
 
+void gve_adminq_write_version(u8 __iomem *driver_version_register);
+
 /* gqi napi handler defined in gve_main.c */
 int gve_napi_poll(struct napi_struct *napi, int budget);
 
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 66a3e774b7c4..91e2f3b0665f 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -296,8 +296,10 @@ gve_process_device_options(struct gve_priv *priv,
 	return 0;
 }
 
-int gve_adminq_alloc(struct device *dev, struct gve_priv *priv)
+static int gve_adminq_alloc(struct gve_priv *priv)
 {
+	struct device *dev = &priv->pdev->dev;
+
 	priv->adminq_pool = dma_pool_create("adminq_pool", dev,
 					    GVE_ADMINQ_BUFFER_SIZE, 0, 0);
 	if (unlikely(!priv->adminq_pool))
@@ -353,6 +355,14 @@ int gve_adminq_alloc(struct device *dev, struct gve_priv *priv)
 	return 0;
 }
 
+int gve_adminq_init(struct gve_priv *priv)
+{
+	struct gve_registers __iomem *reg_bar = priv->reg_bar0;
+
+	gve_adminq_write_version(&reg_bar->driver_version);
+	return gve_adminq_alloc(priv);
+}
+
 void gve_adminq_release(struct gve_priv *priv)
 {
 	int i = 0;
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index ac3ef9fd8d24..d07e9c6f279d 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -619,7 +619,7 @@ union gve_adminq_command {
 
 static_assert(sizeof(union gve_adminq_command) == 64);
 
-int gve_adminq_alloc(struct device *dev, struct gve_priv *priv);
+int gve_adminq_init(struct gve_priv *priv);
 void gve_adminq_free(struct gve_priv *priv);
 void gve_adminq_release(struct gve_priv *priv);
 int gve_adminq_describe_device(struct gve_priv *priv);
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 0d308bde52c8..6f04eefd0416 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2414,6 +2414,35 @@ static void gve_set_buf_sizes(struct gve_priv *priv)
 		priv->header_buf_size = device_info->header_buf_size;
 }
 
+static int gve_setup_device(struct gve_priv *priv)
+{
+	int err;
+
+	priv->num_registered_pages = 0;
+
+	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);
+	if (!priv->xsk_pools) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	gve_set_netdev_xdp_features(priv);
+	if (!gve_is_gqi(priv))
+		priv->dev->xdp_metadata_ops = &gve_xdp_metadata_ops;
+
+	err = gve_setup_device_resources(priv);
+	if (err)
+		goto err_free_xsk_bitmap;
+
+	return 0;
+
+err_free_xsk_bitmap:
+	bitmap_free(priv->xsk_pools);
+	priv->xsk_pools = NULL;
+err:
+	return err;
+}
+
 static const struct gve_ctrl_ops gve_adminq_ops = {
 	.map_db_bar		= gve_adminq_map_db_bar,
 	.unmap_db_bar		= gve_adminq_unmap_db_bar,
@@ -2421,47 +2450,18 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
 	.set_num_ntfy_blks	= gve_adminq_set_num_ntfy_blks,
 };
 
-static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
+static int gve_init_priv(struct gve_priv *priv)
 {
 	struct gve_device_info *device_info = &priv->device_info;
 	int err;
 
-	/* Set up the adminq */
-	err = gve_adminq_alloc(&priv->pdev->dev, priv);
-	if (err) {
-		dev_err(&priv->pdev->dev,
-			"Failed to alloc admin queue: err=%d\n", err);
-		return err;
-	}
-
-	err = gve_adminq_verify_driver_compatibility(priv);
-	if (err) {
-		dev_err(&priv->pdev->dev,
-			"Could not verify driver compatibility: err=%d\n", err);
-		goto err;
-	}
-
-	priv->num_registered_pages = 0;
-
-	if (skip_describe_device)
-		goto setup_device;
-
-	device_info->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
-	/* Get the initial information we need from the device */
-	err = gve_adminq_describe_device(priv);
-	if (err) {
-		dev_err(&priv->pdev->dev,
-			"Could not get device information: err=%d\n", err);
-		goto err;
-	}
-
 	priv->queue_format = priv->device_info.queue_format;
 
 	err = priv->ctrl_ops->set_num_ntfy_blks(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
 			"Could not setup notify blocks: err=%d\n", err);
-		goto err;
+		return err;
 	}
 
 	priv->ctrl_ops->set_num_queues(priv);
@@ -2484,10 +2484,8 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
 	}
 
-	if (gve_set_mtu(priv)) {
-		err = -EINVAL;
-		goto err;
-	}
+	if (gve_set_mtu(priv))
+		return -EINVAL;
 
 	priv->num_event_counters = device_info->num_event_counters;
 
@@ -2512,30 +2510,7 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 	priv->ts_config.tx_type = HWTSTAMP_TX_OFF;
 	priv->ts_config.rx_filter = HWTSTAMP_FILTER_NONE;
 	priv->nic_timestamp_supported = device_info->nic_timestamp_supported;
-
-setup_device:
-	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);
-	if (!priv->xsk_pools) {
-		err = -ENOMEM;
-		goto err;
-	}
-
-	gve_set_netdev_xdp_features(priv);
-	if (!gve_is_gqi(priv))
-		priv->dev->xdp_metadata_ops = &gve_xdp_metadata_ops;
-
-	err = gve_setup_device_resources(priv);
-	if (err)
-		goto err_free_xsk_bitmap;
-
 	return 0;
-
-err_free_xsk_bitmap:
-	bitmap_free(priv->xsk_pools);
-	priv->xsk_pools = NULL;
-err:
-	gve_adminq_free(priv);
-	return err;
 }
 
 static void gve_teardown_priv_resources(struct gve_priv *priv)
@@ -2565,15 +2540,32 @@ static int gve_reset_recovery(struct gve_priv *priv, bool was_up)
 {
 	int err;
 
-	err = gve_init_priv(priv, true);
-	if (err)
+	err = gve_adminq_init(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Failed to alloc admin queue: err=%d\n", err);
 		goto err;
+	}
+
+	err = gve_adminq_verify_driver_compatibility(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Could not verify driver compatibility: err=%d\n", err);
+		goto err_free_adminq;
+	}
+
+	err = gve_setup_device(priv);
+	if (err)
+		goto err_free_adminq;
 	if (was_up) {
 		err = gve_open(priv->dev);
 		if (err)
-			goto err;
+			return err;
 	}
 	return 0;
+
+err_free_adminq:
+	gve_adminq_free(priv);
 err:
 	dev_err(&priv->pdev->dev, "Reset failed! !!! DISABLING ALL QUEUES !!!\n");
 	gve_turndown(priv);
@@ -2616,7 +2608,7 @@ int gve_reset(struct gve_priv *priv, bool attempt_teardown)
 	return err;
 }
 
-static void gve_write_version(u8 __iomem *driver_version_register)
+void gve_adminq_write_version(u8 __iomem *driver_version_register)
 {
 	const char *c = gve_version_prefix;
 
@@ -2849,7 +2841,6 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto abort_with_pci_region;
 	}
 
-	gve_write_version(&reg_bar->driver_version);
 	/* Get max queues to alloc etherdev */
 	max_tx_queues = ioread32be(&reg_bar->max_tx_queues);
 	max_rx_queues = ioread32be(&reg_bar->max_rx_queues);
@@ -2896,13 +2887,28 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	priv->rx_cfg.packet_buffer_size = GVE_DEFAULT_RX_BUFFER_SIZE;
 	priv->max_rx_buffer_size = GVE_DEFAULT_RX_BUFFER_SIZE;
 
+	err = gve_adminq_init(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Failed to alloc admin queue: err=%d\n", err);
+		goto abort_with_netdev;
+	}
+
+	priv->device_info.queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
+	err = gve_adminq_get_device_properties(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Could not get device information: err=%d\n", err);
+		goto abort_with_adminq;
+	}
+
 	/* Set adminq ctrl ops */
 	priv->ctrl_ops = &gve_adminq_ops;
 
 	err = priv->ctrl_ops->map_db_bar(priv);
 	if (err) {
 		err = -ENOMEM;
-		goto abort_with_netdev;
+		goto abort_with_adminq;
 	}
 
 	gve_set_probe_in_progress(priv);
@@ -2917,10 +2923,17 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	priv->tx_cfg.max_queues = max_tx_queues;
 	priv->rx_cfg.max_queues = max_rx_queues;
 
-	err = gve_init_priv(priv, false);
+	err = gve_init_priv(priv);
 	if (err)
 		goto abort_with_wq;
 
+	err = gve_setup_device(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev,
+			"Could not setup device: err=%d\n", err);
+		goto abort_with_wq;
+	}
+
 	if (!gve_is_gqi(priv) && !gve_is_qpl(priv))
 		dev->netmem_tx = NETMEM_TX_DMA;
 
@@ -2943,6 +2956,9 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 abort_with_unmap_db_bar:
 	priv->ctrl_ops->unmap_db_bar(priv);
 
+abort_with_adminq:
+	gve_adminq_free(priv);
+
 abort_with_netdev:
 	free_netdev(dev);
 
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 09/15] gve: simplify reset logic

[Harshitha Ramamurthy]

From: Joshua Washington <joshwash@google.com>

Current GVE reset logic is quite complex, with a number of methods with
similar names and functionalities. This complexity has allowed a number
of bugs to enter the reset/recovery path, including the potential for
reset loops if an operation fails during teardown.

Simplify the reset path by doing the following:
1) Removing recursive resets. Recursive resets have two major issues.
   First, there is the potential for stack overflows if resets are
   invoked too many times in a row. Second, long recursive calls mean
   that GVE never gives up the RTNL lock, or at the very least holds it
   for too long. If a reset must occur anywhere during the
   reset/recovery path, it should be scheduled as a separate task.
2) Removing resets during teardown. This is partly covered by removing
   recursive resets, but the primary goal in this case is to ensure that
   the driver is capable of actually executing a hardware reset if
   something goes wrong with a control plane operation. As it stands, if
   `deconfigure_device_resources` fails, for example, GVE will preempt
   its reset with another reset without actually invoking a hardware
   reset, which could actually help with recovery.
3) Decompose allocation/de-allocation and setup/teardown. Performing
   allocation and setup for each control plane system (RSS, ptype map,
   etc) leaves many more error conditions to handle, causing teardown in
   the case of failures to be much more complex than they need to be.
   This will also be useful to better align a major behavioral change
   in mailbox mode, which will use separate response buffers instead to
   get data from the device instead of a pre-allocated shared memory
   region.

With the new reset functionality, shared resources between the device
and driver are not freed until after the hardware reset has completed
in the event that `deconfigure_device_resources` fails, meaning that the
device could potentially still be holding on to shared memory.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
 - only reset when failing to program flow rules as ethtool op
 - don't attempt to teardown rings in reset path if AQ is not allocated
 - fix work queue semantics related to management IRQ handler
Changes in v2:
  - Fixed typos in commit message (recursive, preempt)
  - Fixed a kdoc warning

 drivers/net/ethernet/google/gve/gve.h         |   2 +-
 drivers/net/ethernet/google/gve/gve_adminq.c  |   9 +-
 drivers/net/ethernet/google/gve/gve_adminq.h  |   1 -
 drivers/net/ethernet/google/gve/gve_ethtool.c |   2 +-
 .../net/ethernet/google/gve/gve_flow_rule.c   |  15 +-
 drivers/net/ethernet/google/gve/gve_main.c    | 352 +++++++++---------
 6 files changed, 197 insertions(+), 184 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 143c666fcebd..7d40267b0672 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -1350,7 +1350,7 @@ struct page_pool *gve_rx_create_page_pool(struct gve_priv *priv,
 
 /* Reset */
 void gve_schedule_reset(struct gve_priv *priv);
-int gve_reset(struct gve_priv *priv, bool attempt_teardown);
+int gve_reset(struct gve_priv *priv, bool skip_queue_setup);
 void gve_get_curr_alloc_cfgs(struct gve_priv *priv,
 			     struct gve_tx_alloc_rings_cfg *tx_alloc_cfg,
 			     struct gve_rx_alloc_rings_cfg *rx_alloc_cfg);
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 91e2f3b0665f..cb0fceb20f69 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -363,7 +363,7 @@ int gve_adminq_init(struct gve_priv *priv)
 	return gve_adminq_alloc(priv);
 }
 
-void gve_adminq_release(struct gve_priv *priv)
+static void gve_adminq_release(struct gve_priv *priv)
 {
 	int i = 0;
 
@@ -392,7 +392,6 @@ void gve_adminq_release(struct gve_priv *priv)
 	}
 	gve_clear_device_rings_ok(priv);
 	gve_clear_device_resources_ok(priv);
-	gve_clear_admin_queue_ok(priv);
 }
 
 void gve_adminq_free(struct gve_priv *priv)
@@ -1375,12 +1374,8 @@ gve_adminq_configure_flow_rule(struct gve_priv *priv,
 			sizeof(struct gve_adminq_configure_flow_rule),
 			flow_rule_cmd);
 
-	if (err == -ETIME) {
-		dev_err(&priv->pdev->dev, "Timeout to configure the flow rule, trigger reset");
-		gve_reset(priv, true);
-	} else if (!err) {
+	if (!err)
 		priv->flow_rules_cache.rules_cache_synced = false;
-	}
 
 	return err;
 }
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index d07e9c6f279d..12d2d1347e21 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -621,7 +621,6 @@ static_assert(sizeof(union gve_adminq_command) == 64);
 
 int gve_adminq_init(struct gve_priv *priv);
 void gve_adminq_free(struct gve_priv *priv);
-void gve_adminq_release(struct gve_priv *priv);
 int gve_adminq_describe_device(struct gve_priv *priv);
 int gve_adminq_configure_device_resources(struct gve_priv *priv,
 					  dma_addr_t counter_array_bus_addr,
diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index 8199738ba979..dd1c44fedc77 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -651,7 +651,7 @@ static int gve_user_reset(struct net_device *netdev, u32 *flags)
 
 	if (*flags == ETH_RESET_ALL) {
 		*flags = 0;
-		return gve_reset(priv, true);
+		return gve_reset(priv, false);
 	}
 
 	return -EOPNOTSUPP;
diff --git a/drivers/net/ethernet/google/gve/gve_flow_rule.c b/drivers/net/ethernet/google/gve/gve_flow_rule.c
index 2c80cda28ef3..fae552f4ad6f 100644
--- a/drivers/net/ethernet/google/gve/gve_flow_rule.c
+++ b/drivers/net/ethernet/google/gve/gve_flow_rule.c
@@ -278,6 +278,11 @@ int gve_add_flow_rule(struct gve_priv *priv, struct ethtool_rxnfc *cmd)
 		goto out;
 
 	err = gve_adminq_add_flow_rule(priv, rule, fsp->location);
+	if (err == -ETIME) {
+		dev_err(&priv->pdev->dev,
+			"Timeout to add flow rule, trigger reset.");
+		gve_reset(priv, false);
+	}
 
 out:
 	kvfree(rule);
@@ -290,9 +295,17 @@ int gve_add_flow_rule(struct gve_priv *priv, struct ethtool_rxnfc *cmd)
 int gve_del_flow_rule(struct gve_priv *priv, struct ethtool_rxnfc *cmd)
 {
 	struct ethtool_rx_flow_spec *fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
+	int err;
 
 	if (!priv->max_flow_rules)
 		return -EOPNOTSUPP;
 
-	return gve_adminq_del_flow_rule(priv, fsp->location);
+	err = gve_adminq_del_flow_rule(priv, fsp->location);
+	if (err == -ETIME) {
+		dev_err(&priv->pdev->dev,
+			"Timeout to delete flow rule, trigger reset.");
+		gve_reset(priv, false);
+	}
+
+	return err;
 }
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 6f04eefd0416..578520e10793 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -591,7 +591,22 @@ static void gve_free_notify_blocks(struct gve_priv *priv)
 	priv->msix_vectors = NULL;
 }
 
-static int gve_setup_device_resources(struct gve_priv *priv)
+static void gve_free_control_plane_resources(struct gve_priv *priv)
+{
+	bitmap_free(priv->xsk_pools);
+	priv->xsk_pools = NULL;
+
+	kvfree(priv->ptype_lut_dqo);
+	priv->ptype_lut_dqo = NULL;
+
+	gve_free_stats_report(priv);
+	gve_free_notify_blocks(priv);
+	gve_free_counter_array(priv);
+	gve_free_rss_config_cache(priv);
+	gve_free_flow_rule_caches(priv);
+}
+
+static int gve_alloc_control_plane_resources(struct gve_priv *priv)
 {
 	int err;
 
@@ -600,16 +615,42 @@ static int gve_setup_device_resources(struct gve_priv *priv)
 		return err;
 	err = gve_alloc_rss_config_cache(priv);
 	if (err)
-		goto abort_with_flow_rule_caches;
+		goto abort;
 	err = gve_alloc_counter_array(priv);
 	if (err)
-		goto abort_with_rss_config_cache;
+		goto abort;
 	err = gve_alloc_notify_blocks(priv);
 	if (err)
-		goto abort_with_counter;
+		goto abort;
 	err = gve_alloc_stats_report(priv);
 	if (err)
-		goto abort_with_ntfy_blocks;
+		goto abort;
+
+	if (!gve_is_gqi(priv)) {
+		priv->ptype_lut_dqo = kvzalloc_obj(*priv->ptype_lut_dqo,
+						   GFP_KERNEL);
+		if (!priv->ptype_lut_dqo) {
+			err = -ENOMEM;
+			goto abort;
+		}
+	}
+
+	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);
+	if (!priv->xsk_pools) {
+		err = -ENOMEM;
+		goto abort;
+	}
+
+	return 0;
+abort:
+	gve_free_control_plane_resources(priv);
+	return err;
+}
+
+static int gve_setup_control_plane_resources(struct gve_priv *priv)
+{
+	int err = 0;
+
 	err = gve_adminq_configure_device_resources(priv,
 						    priv->counter_array_bus,
 						    priv->num_event_counters,
@@ -619,20 +660,15 @@ static int gve_setup_device_resources(struct gve_priv *priv)
 		dev_err(&priv->pdev->dev,
 			"could not setup device_resources: err=%d\n", err);
 		err = -ENXIO;
-		goto abort_with_stats_report;
+		return err;
 	}
 
 	if (!gve_is_gqi(priv)) {
-		priv->ptype_lut_dqo = kvzalloc_obj(*priv->ptype_lut_dqo);
-		if (!priv->ptype_lut_dqo) {
-			err = -ENOMEM;
-			goto abort_with_stats_report;
-		}
 		err = gve_adminq_get_ptype_map_dqo(priv, priv->ptype_lut_dqo);
 		if (err) {
 			dev_err(&priv->pdev->dev,
 				"Failed to get ptype map: err=%d\n", err);
-			goto abort_with_ptype_lut;
+			goto deconfigure_device;
 		}
 	}
 
@@ -647,7 +683,7 @@ static int gve_setup_device_resources(struct gve_priv *priv)
 	err = gve_init_rss_config(priv, priv->rx_cfg.num_queues);
 	if (err) {
 		dev_err(&priv->pdev->dev, "Failed to init RSS config");
-		goto abort_with_clock;
+		goto teardown_clock;
 	}
 
 	err = gve_adminq_report_stats(priv, priv->stats_report_len,
@@ -659,67 +695,61 @@ static int gve_setup_device_resources(struct gve_priv *priv)
 	gve_set_device_resources_ok(priv);
 	return 0;
 
-abort_with_clock:
+teardown_clock:
 	gve_teardown_clock(priv);
-abort_with_ptype_lut:
-	kvfree(priv->ptype_lut_dqo);
-	priv->ptype_lut_dqo = NULL;
-abort_with_stats_report:
-	gve_free_stats_report(priv);
-abort_with_ntfy_blocks:
-	gve_free_notify_blocks(priv);
-abort_with_counter:
-	gve_free_counter_array(priv);
-abort_with_rss_config_cache:
-	gve_free_rss_config_cache(priv);
-abort_with_flow_rule_caches:
-	gve_free_flow_rule_caches(priv);
-
+deconfigure_device:
+	gve_adminq_deconfigure_device_resources(priv);
 	return err;
 }
 
-static void gve_trigger_reset(struct gve_priv *priv);
-
-static void gve_teardown_device_resources(struct gve_priv *priv)
+/**
+ * Request the device to release any allocated shared resources.
+ *
+ * If any part of the teardown step fails, the failure is documented, but is
+ * otherwise ignored. It is expected that a device reset is triggered
+ * immediately after tearing down device resources, which would clear any
+ * lingering state on the device.
+ */
+static void gve_teardown_control_plane_resources(struct gve_priv *priv)
 {
 	int err;
 
 	/* Tell device its resources are being freed */
 	if (gve_get_device_resources_ok(priv)) {
 		err = gve_flow_rules_reset(priv);
-		if (err) {
+		if (err)
 			dev_err(&priv->pdev->dev,
 				"Failed to reset flow rules: err=%d\n", err);
-			gve_trigger_reset(priv);
-		}
 		/* detach the stats report */
 		err = gve_adminq_report_stats(priv, 0, 0x0, GVE_STATS_REPORT_TIMER_PERIOD);
-		if (err) {
+		if (err)
 			dev_err(&priv->pdev->dev,
 				"Failed to detach stats report: err=%d\n", err);
-			gve_trigger_reset(priv);
-		}
+		gve_teardown_clock(priv);
 		err = gve_adminq_deconfigure_device_resources(priv);
-		if (err) {
+		if (err)
 			dev_err(&priv->pdev->dev,
 				"Could not deconfigure device resources: err=%d\n",
 				err);
-			gve_trigger_reset(priv);
-		}
 	}
 
-	kvfree(priv->ptype_lut_dqo);
-	priv->ptype_lut_dqo = NULL;
-
-	gve_free_flow_rule_caches(priv);
-	gve_free_rss_config_cache(priv);
-	gve_free_counter_array(priv);
-	gve_free_notify_blocks(priv);
-	gve_free_stats_report(priv);
-	gve_teardown_clock(priv);
 	gve_clear_device_resources_ok(priv);
 }
 
+static void gve_teardown_device(struct gve_priv *priv)
+{
+	gve_teardown_control_plane_resources(priv);
+	gve_adminq_free(priv);
+	/*
+	 * Free any resources shared with the device only after we have a
+	 * guarantee that the device will not try to access such resources.
+	 * Device commands in gve_teardown_control_plane_resources can fail, in
+	 * which case, device resources won't be relinquished until
+	 * gve_adminq_free is called to trigger a device reset.
+	 */
+	gve_free_control_plane_resources(priv);
+}
+
 static int gve_unregister_qpl(struct gve_priv *priv,
 			      struct gve_queue_page_list *qpl)
 {
@@ -1158,8 +1188,6 @@ void gve_schedule_reset(struct gve_priv *priv)
 	queue_work(priv->gve_wq, &priv->service_task);
 }
 
-static void gve_reset_and_teardown(struct gve_priv *priv, bool was_up);
-static int gve_reset_recovery(struct gve_priv *priv, bool was_up);
 static void gve_turndown(struct gve_priv *priv);
 static void gve_turnup(struct gve_priv *priv);
 
@@ -1270,11 +1298,12 @@ static int gve_reg_xdp_info(struct gve_priv *priv, struct net_device *dev)
 	return err;
 }
 
-
 static void gve_drain_page_cache(struct gve_priv *priv)
 {
 	int i;
 
+	if (!priv->rx)
+		return;
 	for (i = 0; i < priv->rx_cfg.num_queues; i++)
 		page_frag_cache_drain(&priv->rx[i].page_cache);
 }
@@ -1417,10 +1446,11 @@ static int gve_queues_start(struct gve_priv *priv,
 reset:
 	if (gve_get_reset_in_progress(priv))
 		goto stop_and_free_rings;
-	gve_reset_and_teardown(priv, true);
-	/* if this fails there is nothing we can do so just ignore the return */
-	gve_reset_recovery(priv, false);
-	/* return the original error */
+
+	/* Attempt to reset. If reset is successful, gve_queues_start was
+	 * successful.
+	 */
+	err = gve_reset(priv, false);
 	return err;
 stop_and_free_rings:
 	gve_tx_stop_rings(priv, gve_num_tx_queues(priv));
@@ -1436,6 +1466,12 @@ static int gve_open(struct net_device *dev)
 	struct gve_priv *priv = netdev_priv(dev);
 	int err;
 
+	if (!gve_get_device_resources_ok(priv)) {
+		dev_err(&priv->pdev->dev,
+			"Attempting to open netdev without resources. Device must be reset.");
+		return -ENODEV;
+	}
+
 	gve_get_curr_alloc_cfgs(priv, &tx_alloc_cfg, &rx_alloc_cfg);
 
 	err = gve_queues_mem_alloc(priv, &tx_alloc_cfg, &rx_alloc_cfg);
@@ -1452,41 +1488,18 @@ static int gve_open(struct net_device *dev)
 	return 0;
 }
 
-static int gve_queues_stop(struct gve_priv *priv)
+static void gve_queues_stop(struct gve_priv *priv)
 {
-	int err;
-
-	netif_carrier_off(priv->dev);
-	if (gve_get_device_rings_ok(priv)) {
-		gve_turndown(priv);
-		gve_drain_page_cache(priv);
-		err = gve_destroy_rings(priv);
-		if (err)
-			goto err;
-		err = gve_unregister_qpls(priv);
-		if (err)
-			goto err;
-		gve_clear_device_rings_ok(priv);
-	}
-	timer_delete_sync(&priv->stats_report_timer);
+	gve_turndown(priv);
 
 	gve_unreg_xdp_info(priv);
+	gve_drain_page_cache(priv);
+
+	timer_delete_sync(&priv->stats_report_timer);
+	cancel_work_sync(&priv->stats_report_task);
 
 	gve_tx_stop_rings(priv, gve_num_tx_queues(priv));
 	gve_rx_stop_rings(priv, priv->rx_cfg.num_queues);
-
-	priv->interface_down_cnt++;
-	return 0;
-
-err:
-	/* This must have been called from a reset due to the rtnl lock
-	 * so just return at this point.
-	 */
-	if (gve_get_reset_in_progress(priv))
-		return err;
-	/* Otherwise reset before returning */
-	gve_reset_and_teardown(priv, true);
-	return gve_reset_recovery(priv, false);
 }
 
 static int gve_close(struct net_device *dev)
@@ -1494,12 +1507,28 @@ static int gve_close(struct net_device *dev)
 	struct gve_priv *priv = netdev_priv(dev);
 	int err;
 
-	err = gve_queues_stop(priv);
-	if (err)
-		return err;
+	gve_queues_stop(priv);
+
+	/* Surrender to reset if the queue destroying adminq cmds fail. Reset
+	 * will not re-enable the interface.
+	 */
+	if (gve_get_device_rings_ok(priv)) {
+		gve_clear_device_rings_ok(priv);
+		err = gve_destroy_rings(priv);
+		if (err)
+			goto reset;
+		err = gve_unregister_qpls(priv);
+		if (err)
+			goto reset;
+	}
 
 	gve_queues_mem_remove(priv);
+	priv->interface_down_cnt++;
 	return 0;
+
+reset:
+	err = gve_reset(priv, true);
+	return err;
 }
 
 static void gve_handle_link_status(struct gve_priv *priv, bool link_status)
@@ -2420,25 +2449,17 @@ static int gve_setup_device(struct gve_priv *priv)
 
 	priv->num_registered_pages = 0;
 
-	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);
-	if (!priv->xsk_pools) {
-		err = -ENOMEM;
-		goto err;
-	}
-
 	gve_set_netdev_xdp_features(priv);
 	if (!gve_is_gqi(priv))
 		priv->dev->xdp_metadata_ops = &gve_xdp_metadata_ops;
 
-	err = gve_setup_device_resources(priv);
+	err = gve_alloc_control_plane_resources(priv);
 	if (err)
-		goto err_free_xsk_bitmap;
-
+		goto err;
+	err = gve_setup_control_plane_resources(priv);
+	if (err)
+		goto err;
 	return 0;
-
-err_free_xsk_bitmap:
-	bitmap_free(priv->xsk_pools);
-	priv->xsk_pools = NULL;
 err:
 	return err;
 }
@@ -2513,93 +2534,81 @@ static int gve_init_priv(struct gve_priv *priv)
 	return 0;
 }
 
-static void gve_teardown_priv_resources(struct gve_priv *priv)
-{
-	gve_teardown_device_resources(priv);
-	gve_adminq_free(priv);
-	bitmap_free(priv->xsk_pools);
-	priv->xsk_pools = NULL;
-}
-
-static void gve_trigger_reset(struct gve_priv *priv)
-{
-	/* Reset the device by releasing the AQ */
-	gve_adminq_release(priv);
-}
-
-static void gve_reset_and_teardown(struct gve_priv *priv, bool was_up)
-{
-	gve_trigger_reset(priv);
-	/* With the reset having already happened, close cannot fail */
-	if (was_up)
-		gve_close(priv->dev);
-	gve_teardown_priv_resources(priv);
-}
-
-static int gve_reset_recovery(struct gve_priv *priv, bool was_up)
+static int gve_recover(struct gve_priv *priv, bool setup_queues)
 {
+	bool service_task_enabled = false;
 	int err;
 
 	err = gve_adminq_init(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
 			"Failed to alloc admin queue: err=%d\n", err);
-		goto err;
+		goto teardown_device;
 	}
 
 	err = gve_adminq_verify_driver_compatibility(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
 			"Could not verify driver compatibility: err=%d\n", err);
-		goto err_free_adminq;
+		goto teardown_device;
 	}
 
 	err = gve_setup_device(priv);
 	if (err)
-		goto err_free_adminq;
-	if (was_up) {
+		goto teardown_device;
+
+	/* In the case of cascading failures, the disable count could be greater
+	 * than 1. The service task must be enabled before starting queues.
+	 */
+	while (!service_task_enabled)
+		service_task_enabled = enable_work(&priv->service_task);
+
+	if (setup_queues) {
 		err = gve_open(priv->dev);
 		if (err)
-			return err;
+			goto disable_work;
 	}
+
 	return 0;
 
-err_free_adminq:
-	gve_adminq_free(priv);
-err:
-	dev_err(&priv->pdev->dev, "Reset failed! !!! DISABLING ALL QUEUES !!!\n");
-	gve_turndown(priv);
+disable_work:
+	disable_work(&priv->service_task);
+teardown_device:
+	dev_err(&priv->pdev->dev, "Recover failed! !!! DISABLING ALL QUEUES !!!\n");
+	gve_teardown_device(priv);
 	return err;
 }
 
-int gve_reset(struct gve_priv *priv, bool attempt_teardown)
+int gve_reset(struct gve_priv *priv, bool skip_queue_setup)
 {
 	bool was_up = netif_running(priv->dev);
 	int err;
 
+	if (gve_get_reset_in_progress(priv))
+		return 0;
+
 	dev_info(&priv->pdev->dev, "Performing reset\n");
 	gve_clear_do_reset(priv);
 	gve_set_reset_in_progress(priv);
-	/* If we aren't attempting to teardown normally, just go turndown and
-	 * reset right away.
-	 */
-	if (!attempt_teardown) {
-		gve_turndown(priv);
-		gve_reset_and_teardown(priv, was_up);
-	} else {
-		/* Otherwise attempt to close normally */
-		if (was_up) {
-			err = gve_close(priv->dev);
-			/* If that fails reset as we did above */
-			if (err)
-				gve_reset_and_teardown(priv, was_up);
+
+	if (was_up) {
+		gve_queues_stop(priv);
+		if (gve_get_device_rings_ok(priv)) {
+			gve_clear_device_rings_ok(priv);
+			gve_destroy_rings(priv);
+			gve_unregister_qpls(priv);
 		}
-		/* Clean up any remaining resources */
-		gve_teardown_priv_resources(priv);
 	}
 
-	/* Set it all back up */
-	err = gve_reset_recovery(priv, was_up);
+	disable_work(&priv->service_task);
+	gve_teardown_device(priv);
+	gve_queues_mem_remove(priv);
+
+	err = gve_recover(priv, was_up && !skip_queue_setup);
+	if (err)
+		dev_info(&priv->pdev->dev,
+			 "Failed to recover in reset: %d\n", err);
+
 	gve_clear_reset_in_progress(priv);
 	priv->reset_cnt++;
 	priv->interface_up_cnt = 0;
@@ -2931,7 +2940,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err) {
 		dev_err(&priv->pdev->dev,
 			"Could not setup device: err=%d\n", err);
-		goto abort_with_wq;
+		goto abort_teardown_device;
 	}
 
 	if (!gve_is_gqi(priv) && !gve_is_qpl(priv))
@@ -2939,7 +2948,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	err = register_netdev(dev);
 	if (err)
-		goto abort_with_gve_init;
+		goto abort_teardown_device;
 
 	dev_info(&pdev->dev, "GVE version %s\n", gve_version_str);
 	dev_info(&pdev->dev, "GVE queue format %d\n", (int)priv->queue_format);
@@ -2947,8 +2956,9 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	queue_work(priv->gve_wq, &priv->service_task);
 	return 0;
 
-abort_with_gve_init:
-	gve_teardown_priv_resources(priv);
+abort_teardown_device:
+	disable_work(&priv->stats_report_task);
+	gve_teardown_device(priv);
 
 abort_with_wq:
 	destroy_workqueue(priv->gve_wq);
@@ -2980,7 +2990,8 @@ static void gve_remove(struct pci_dev *pdev)
 	void __iomem *reg_bar = priv->reg_bar0;
 
 	unregister_netdev(netdev);
-	gve_teardown_priv_resources(priv);
+	disable_work_sync(&priv->service_task);
+	gve_teardown_device(priv);
 	destroy_workqueue(priv->gve_wq);
 	priv->ctrl_ops->unmap_db_bar(priv);
 	free_netdev(netdev);
@@ -2996,16 +3007,13 @@ static void gve_shutdown(struct pci_dev *pdev)
 	bool was_up = netif_running(priv->dev);
 
 	netif_device_detach(netdev);
+	disable_work_sync(&priv->service_task);
 
 	rtnl_lock();
 	netdev_lock(netdev);
-	if (was_up && gve_close(priv->dev)) {
-		/* If the dev was up, attempt to close, if close fails, reset */
-		gve_reset_and_teardown(priv, was_up);
-	} else {
-		/* If the dev wasn't up or close worked, finish tearing down */
-		gve_teardown_priv_resources(priv);
-	}
+	if (was_up)
+		gve_close(priv->dev);
+	gve_teardown_device(priv);
 	netdev_unlock(netdev);
 	rtnl_unlock();
 }
@@ -3017,16 +3025,14 @@ static int gve_suspend(struct device *dev)
 	struct gve_priv *priv = netdev_priv(netdev);
 	bool was_up = netif_running(priv->dev);
 
+	disable_work_sync(&priv->service_task);
+
 	priv->suspend_cnt++;
 	rtnl_lock();
 	netdev_lock(netdev);
-	if (was_up && gve_close(priv->dev)) {
-		/* If the dev was up, attempt to close, if close fails, reset */
-		gve_reset_and_teardown(priv, was_up);
-	} else {
-		/* If the dev wasn't up or close worked, finish tearing down */
-		gve_teardown_priv_resources(priv);
-	}
+	if (was_up)
+		gve_close(priv->dev);
+	gve_teardown_device(priv);
 	priv->up_before_suspend = was_up;
 	netdev_unlock(netdev);
 	rtnl_unlock();
@@ -3043,7 +3049,7 @@ static int gve_resume(struct device *dev)
 	priv->resume_cnt++;
 	rtnl_lock();
 	netdev_lock(netdev);
-	err = gve_reset_recovery(priv, priv->up_before_suspend);
+	err = gve_recover(priv, priv->up_before_suspend);
 	netdev_unlock(netdev);
 	rtnl_unlock();
 	return err;
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 10/15] gve: add gve_ctrl_ops for gve initialization/teardown sequences

[Harshitha Ramamurthy]

From: Joshua Washington <joshwash@google.com>

Driver initialization and teardown involve a number of control plane
operations that need to be defined for gve_probe to operate in both
mailbox and adminq modes. This list includes:

- get_ptype_map: a mapping of packet types (L3+L4) held in RX completion
  descriptors
- configure_rss: set up default RSS configuration if the device is not
  queryable
- setup_stats_report: set up DMA region for stats report (AQ-only)
- reset_flow_rules: needed in teardown; flushes all flow rules from
  device

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
 drivers/net/ethernet/google/gve/gve.h        | 12 ++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.c |  7 +++---
 drivers/net/ethernet/google/gve/gve_adminq.h |  3 +--
 drivers/net/ethernet/google/gve/gve_main.c   | 24 +++++++++++++++-----
 4 files changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 7d40267b0672..c65c7d264430 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -835,12 +835,24 @@ struct gve_device_info {
  *                  structures stored in @priv to be used during initialization.
  * @set_num_ntfy_blks: Sets no. of vectors into @priv to be used during
  *                     initialization.
+ * @get_ptype_map: Learn packet type map from device and store it in @priv
+ * @configure_rss: Set up default RSS configuration
+ * @setup_stats_report: Set up DMA region for stats report (AdminQ only)
+ * @reset_flow_rules: Flush all flow rules from device
  */
 struct gve_ctrl_ops {
 	int (*map_db_bar)(struct gve_priv *priv);
 	void (*unmap_db_bar)(struct gve_priv *priv);
 	void (*set_num_queues)(struct gve_priv *priv);
 	int (*set_num_ntfy_blks)(struct gve_priv *priv);
+	int (*get_ptype_map)(struct gve_priv *priv);
+	int (*configure_rss)(struct gve_priv *priv,
+			     struct ethtool_rxfh_param *param);
+	int (*setup_stats_report)(struct gve_priv *priv,
+				  u64 stats_report_len,
+				  dma_addr_t stats_report_addr,
+				  u64 interval_ms); /* AQ-specific */
+	int (*reset_flow_rules)(struct gve_priv *priv);
 };
 
 struct gve_priv {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index cb0fceb20f69..cb0e7005dd3c 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1327,8 +1327,7 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 	return gve_adminq_execute_cmd(priv, &cmd);
 }
 
-int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
-				 struct gve_ptype_lut *ptype_lut)
+int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv)
 {
 	struct gve_ptype_map *ptype_map;
 	union gve_adminq_command cmd;
@@ -1354,9 +1353,9 @@ int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 
 	/* Populate ptype_lut. */
 	for (i = 0; i < GVE_NUM_PTYPES; i++) {
-		ptype_lut->ptypes[i].l3_type =
+		priv->ptype_lut_dqo->ptypes[i].l3_type =
 			ptype_map->ptypes[i].l3_type;
-		ptype_lut->ptypes[i].l4_type =
+		priv->ptype_lut_dqo->ptypes[i].l4_type =
 			ptype_map->ptypes[i].l4_type;
 	}
 err:
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 12d2d1347e21..d5f98a80be46 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -652,8 +652,7 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 			     dma_addr_t nic_ts_report_addr);
 
 struct gve_ptype_lut;
-int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
-				 struct gve_ptype_lut *ptype_lut);
+int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv);
 int gve_adminq_map_db_bar(struct gve_priv *priv);
 void gve_adminq_unmap_db_bar(struct gve_priv *priv);
 int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv);
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 578520e10793..c347661faac0 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -649,7 +649,8 @@ static int gve_alloc_control_plane_resources(struct gve_priv *priv)
 
 static int gve_setup_control_plane_resources(struct gve_priv *priv)
 {
-	int err = 0;
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
+	int err;
 
 	err = gve_adminq_configure_device_resources(priv,
 						    priv->counter_array_bus,
@@ -664,7 +665,7 @@ static int gve_setup_control_plane_resources(struct gve_priv *priv)
 	}
 
 	if (!gve_is_gqi(priv)) {
-		err = gve_adminq_get_ptype_map_dqo(priv, priv->ptype_lut_dqo);
+		err = ops->get_ptype_map(priv);
 		if (err) {
 			dev_err(&priv->pdev->dev,
 				"Failed to get ptype map: err=%d\n", err);
@@ -686,12 +687,13 @@ static int gve_setup_control_plane_resources(struct gve_priv *priv)
 		goto teardown_clock;
 	}
 
-	err = gve_adminq_report_stats(priv, priv->stats_report_len,
+	err = ops->setup_stats_report(priv, priv->stats_report_len,
 				      priv->stats_report_bus,
 				      GVE_STATS_REPORT_TIMER_PERIOD);
 	if (err)
 		dev_err(&priv->pdev->dev,
 			"Failed to report stats: err=%d\n", err);
+
 	gve_set_device_resources_ok(priv);
 	return 0;
 
@@ -712,6 +714,7 @@ static int gve_setup_control_plane_resources(struct gve_priv *priv)
  */
 static void gve_teardown_control_plane_resources(struct gve_priv *priv)
 {
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 	int err;
 
 	/* Tell device its resources are being freed */
@@ -721,11 +724,13 @@ static void gve_teardown_control_plane_resources(struct gve_priv *priv)
 			dev_err(&priv->pdev->dev,
 				"Failed to reset flow rules: err=%d\n", err);
 		/* detach the stats report */
-		err = gve_adminq_report_stats(priv, 0, 0x0, GVE_STATS_REPORT_TIMER_PERIOD);
+		err = ops->setup_stats_report(priv, 0, 0x0,
+					      GVE_STATS_REPORT_TIMER_PERIOD);
 		if (err)
 			dev_err(&priv->pdev->dev,
 				"Failed to detach stats report: err=%d\n", err);
 		gve_teardown_clock(priv);
+
 		err = gve_adminq_deconfigure_device_resources(priv);
 		if (err)
 			dev_err(&priv->pdev->dev,
@@ -1809,6 +1814,7 @@ static int gve_xdp(struct net_device *dev, struct netdev_bpf *xdp)
 
 int gve_init_rss_config(struct gve_priv *priv, u16 num_queues)
 {
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 	struct gve_rss_config *rss_config = &priv->rss_config;
 	struct ethtool_rxfh_param rxfh = {0};
 	u16 i;
@@ -1824,15 +1830,17 @@ int gve_init_rss_config(struct gve_priv *priv, u16 num_queues)
 
 	rxfh.hfunc = ETH_RSS_HASH_TOP;
 
-	return gve_adminq_configure_rss(priv, &rxfh);
+	return ops->configure_rss(priv, &rxfh);
 }
 
 int gve_flow_rules_reset(struct gve_priv *priv)
 {
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
+
 	if (!priv->max_flow_rules)
 		return 0;
 
-	return gve_adminq_reset_flow_rules(priv);
+	return ops->reset_flow_rules(priv);
 }
 
 int gve_adjust_config(struct gve_priv *priv,
@@ -2469,6 +2477,10 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
 	.unmap_db_bar		= gve_adminq_unmap_db_bar,
 	.set_num_queues		= gve_adminq_set_num_queues,
 	.set_num_ntfy_blks	= gve_adminq_set_num_ntfy_blks,
+	.get_ptype_map		= gve_adminq_get_ptype_map_dqo,
+	.reset_flow_rules	= gve_adminq_reset_flow_rules,
+	.setup_stats_report	= gve_adminq_report_stats,
+	.configure_rss		= gve_adminq_configure_rss,
 };
 
 static int gve_init_priv(struct gve_priv *priv)
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 11/15] gve: split up notify block allocation and setup paths

[Harshitha Ramamurthy]

From: Joshua Washington <joshwash@google.com>

Before this patch, notify block allocation and setup occurred in the same
method. This all occurred before gve_adminq_configure_device_resources,
which populates the irq_db_indicies array, a DMA region with BAR offsets
for MSI-X vectors.

The coming mailbox mode will require notify blocks to be set up only
after receiving the IRQ doorbell offsets, as the request does not work
with a supplied DMA buffer in the way that admin queue mode does. The
intended flow in that case would be:

1) allocate notify blocks
2) request doorbell information
3) set up MSI-X vectors based on doorbell info

This ordering also works for admin queue mode, so it will be updated to
match.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
- remove redundant call to gve_teardown_clock()

 drivers/net/ethernet/google/gve/gve.h      |   2 +
 drivers/net/ethernet/google/gve/gve_main.c | 155 +++++++++++----------
 2 files changed, 86 insertions(+), 71 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index c65c7d264430..8766ea62baf1 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -676,6 +676,7 @@ struct gve_notify_block {
 	struct gve_tx_ring *tx; /* tx rings on this block */
 	struct gve_rx_ring *rx; /* rx rings on this block */
 	u32 irq;
+	bool irq_requested;
 };
 
 /* Tracks allowed and current rx queue settings */
@@ -956,6 +957,7 @@ struct gve_priv {
 	u64 link_speed;
 	bool up_before_suspend; /* True if dev was up before suspend */
 
+	bool mgmt_irq_requested;
 	struct gve_ptype_lut *ptype_lut_dqo;
 
 	/* Must be a power of two. */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index c347661faac0..e96e353be04d 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -425,6 +425,24 @@ int gve_napi_poll_dqo(struct napi_struct *napi, int budget)
 	return work_done;
 }
 
+static void gve_free_notify_blocks(struct gve_priv *priv)
+{
+	pci_disable_msix(priv->pdev);
+	if (priv->irq_db_indices) {
+		dma_free_coherent(&priv->pdev->dev,
+				  priv->num_ntfy_blks *
+				  sizeof(*priv->irq_db_indices),
+				  priv->irq_db_indices,
+				  priv->irq_db_indices_bus);
+		priv->irq_db_indices = NULL;
+	}
+
+	kvfree(priv->ntfy_blocks);
+	priv->ntfy_blocks = NULL;
+	kvfree(priv->msix_vectors);
+	priv->msix_vectors = NULL;
+}
+
 static const struct cpumask *gve_get_node_mask(struct gve_priv *priv)
 {
 	if (priv->numa_node == NUMA_NO_NODE)
@@ -436,11 +454,9 @@ static const struct cpumask *gve_get_node_mask(struct gve_priv *priv)
 static int gve_alloc_notify_blocks(struct gve_priv *priv)
 {
 	int num_vecs_requested = priv->num_ntfy_blks + 1;
-	const struct cpumask *node_mask;
-	unsigned int cur_cpu;
 	int vecs_enabled;
-	int i, j;
 	int err;
+	int i;
 
 	priv->msix_vectors = kvzalloc_objs(*priv->msix_vectors,
 					   num_vecs_requested);
@@ -454,7 +470,7 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 		dev_err(&priv->pdev->dev, "Could not enable min msix %d/%d\n",
 			GVE_MIN_MSIX, vecs_enabled);
 		err = vecs_enabled;
-		goto abort_with_msix_vectors;
+		goto abort;
 	}
 	if (vecs_enabled != num_vecs_requested) {
 		int new_num_ntfy_blks = (vecs_enabled - 1) & ~0x1;
@@ -477,15 +493,6 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 			priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
 	}
 
-	/* Setup Management Vector  - the last vector */
-	snprintf(priv->mgmt_msix_name, sizeof(priv->mgmt_msix_name), "gve-mgmnt@pci:%s",
-		 pci_name(priv->pdev));
-	err = request_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector,
-			  gve_mgmnt_intr, 0, priv->mgmt_msix_name, priv);
-	if (err) {
-		dev_err(&priv->pdev->dev, "Did not receive management vector.\n");
-		goto abort_with_msix_enabled;
-	}
 	priv->irq_db_indices =
 		dma_alloc_coherent(&priv->pdev->dev,
 				   priv->num_ntfy_blks *
@@ -493,15 +500,65 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 				   &priv->irq_db_indices_bus, GFP_KERNEL);
 	if (!priv->irq_db_indices) {
 		err = -ENOMEM;
-		goto abort_with_mgmt_vector;
+		goto abort;
 	}
 
 	priv->ntfy_blocks = kvzalloc(priv->num_ntfy_blks *
 				     sizeof(*priv->ntfy_blocks), GFP_KERNEL);
 	if (!priv->ntfy_blocks) {
 		err = -ENOMEM;
-		goto abort_with_irq_db_indices;
+		goto abort;
+	}
+	return 0;
+
+abort:
+	gve_free_notify_blocks(priv);
+	return err;
+}
+
+static void gve_teardown_notify_blocks(struct gve_priv *priv)
+{
+	int i;
+
+	if (!priv->ntfy_blocks)
+		return;
+
+	for (i = 0; i < priv->num_ntfy_blks; i++) {
+		struct gve_notify_block *block = &priv->ntfy_blocks[i];
+
+		if (!block->irq_requested)
+			continue;
+
+		irq_set_affinity_hint(priv->msix_vectors[i].vector,
+				      NULL);
+		free_irq(priv->msix_vectors[i].vector, block);
+		block->irq = 0;
+		block->irq_requested = false;
+	}
+
+	if (priv->mgmt_irq_requested) {
+		free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
+		priv->mgmt_irq_requested = false;
+	}
+}
+
+static int gve_setup_notify_blocks(struct gve_priv *priv)
+{
+	const struct cpumask *node_mask;
+	unsigned int cur_cpu;
+	int i;
+	int err;
+
+	/* Setup Management Vector  - the last vector */
+	snprintf(priv->mgmt_msix_name, sizeof(priv->mgmt_msix_name),
+		 "gve-mgmnt@pci:%s", pci_name(priv->pdev));
+	err = request_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector,
+			  gve_mgmnt_intr, 0, priv->mgmt_msix_name, priv);
+	if (err) {
+		dev_err(&priv->pdev->dev, "Did not receive management vector.\n");
+		return err;
 	}
+	priv->mgmt_irq_requested = true;
 
 	/* Setup the other blocks - the first n-1 vectors */
 	node_mask = gve_get_node_mask(priv);
@@ -519,9 +576,10 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 		if (err) {
 			dev_err(&priv->pdev->dev,
 				"Failed to receive msix vector %d\n", i);
-			goto abort_with_some_ntfy_blocks;
+			goto abort;
 		}
 		block->irq = priv->msix_vectors[msix_idx].vector;
+		block->irq_requested = true;
 		irq_set_affinity_and_hint(block->irq,
 					  cpumask_of(cur_cpu));
 		block->irq_db_index = &priv->irq_db_indices[i].index;
@@ -535,61 +593,12 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 			cur_cpu = cpumask_first(node_mask);
 	}
 	return 0;
-abort_with_some_ntfy_blocks:
-	for (j = 0; j < i; j++) {
-		struct gve_notify_block *block = &priv->ntfy_blocks[j];
-		int msix_idx = j;
 
-		irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector,
-				      NULL);
-		free_irq(priv->msix_vectors[msix_idx].vector, block);
-		block->irq = 0;
-	}
-	kvfree(priv->ntfy_blocks);
-	priv->ntfy_blocks = NULL;
-abort_with_irq_db_indices:
-	dma_free_coherent(&priv->pdev->dev, priv->num_ntfy_blks *
-			  sizeof(*priv->irq_db_indices),
-			  priv->irq_db_indices, priv->irq_db_indices_bus);
-	priv->irq_db_indices = NULL;
-abort_with_mgmt_vector:
-	free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
-abort_with_msix_enabled:
-	pci_disable_msix(priv->pdev);
-abort_with_msix_vectors:
-	kvfree(priv->msix_vectors);
-	priv->msix_vectors = NULL;
+abort:
+	gve_teardown_notify_blocks(priv);
 	return err;
 }
 
-static void gve_free_notify_blocks(struct gve_priv *priv)
-{
-	int i;
-
-	if (!priv->msix_vectors)
-		return;
-
-	/* Free the irqs */
-	for (i = 0; i < priv->num_ntfy_blks; i++) {
-		struct gve_notify_block *block = &priv->ntfy_blocks[i];
-		int msix_idx = i;
-
-		irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector,
-				      NULL);
-		free_irq(priv->msix_vectors[msix_idx].vector, block);
-		block->irq = 0;
-	}
-	free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
-	kvfree(priv->ntfy_blocks);
-	priv->ntfy_blocks = NULL;
-	dma_free_coherent(&priv->pdev->dev, priv->num_ntfy_blks *
-			  sizeof(*priv->irq_db_indices),
-			  priv->irq_db_indices, priv->irq_db_indices_bus);
-	priv->irq_db_indices = NULL;
-	pci_disable_msix(priv->pdev);
-	kvfree(priv->msix_vectors);
-	priv->msix_vectors = NULL;
-}
 
 static void gve_free_control_plane_resources(struct gve_priv *priv)
 {
@@ -743,6 +752,7 @@ static void gve_teardown_control_plane_resources(struct gve_priv *priv)
 
 static void gve_teardown_device(struct gve_priv *priv)
 {
+	gve_teardown_notify_blocks(priv);
 	gve_teardown_control_plane_resources(priv);
 	gve_adminq_free(priv);
 	/*
@@ -2463,13 +2473,16 @@ static int gve_setup_device(struct gve_priv *priv)
 
 	err = gve_alloc_control_plane_resources(priv);
 	if (err)
-		goto err;
+		return err;
+
 	err = gve_setup_control_plane_resources(priv);
 	if (err)
-		goto err;
+		return err;
+
+	err = gve_setup_notify_blocks(priv);
+	if (err)
+		return err;
 	return 0;
-err:
-	return err;
 }
 
 static const struct gve_ctrl_ops gve_adminq_ops = {
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 12/15] gve: introduce new methods to handle IRQ doorbells

[Harshitha Ramamurthy]

From: Joshua Washington <joshwash@google.com>

Introduce `request_db_info` and `free_db_resources` to
`struct gve_ctrl_ops`. These encapsulate the configuration of device
resources (counter arrays and IRQ doorbell indices) which vary between
Admin Queue and Mailbox modes. All behaviors related to the IRQ doorbell
indices will be managed by these new methods instead of occurring
directly in notify_block setup/teardown methods. Similarly, GQ ring
counters will be managed in `request_db_info`.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
  - move allocation of IRQ DB indices and counter array back into
    gve_alloc_control_plane_resources() from
    gve_adminq_request_db_info().
  - Similar to above, move free logic out of
    gve_adminq_free_db_resources() and rename all introduced methods
    from *free_db_resources to *release_db_resources to reflect the
    behavioral change.

 drivers/net/ethernet/google/gve/gve.h        |  9 ++
 drivers/net/ethernet/google/gve/gve_adminq.c | 37 ++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h |  2 +
 drivers/net/ethernet/google/gve/gve_main.c   | 98 ++++++++++----------
 4 files changed, 96 insertions(+), 50 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 8766ea62baf1..f3cfc9d0cdec 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -836,6 +836,8 @@ struct gve_device_info {
  *                  structures stored in @priv to be used during initialization.
  * @set_num_ntfy_blks: Sets no. of vectors into @priv to be used during
  *                     initialization.
+ * @request_db_info: Request and store doorbell information into @priv
+ * @free_db_resources: Free DMA memory holding doorbell info (AdminQ only)
  * @get_ptype_map: Learn packet type map from device and store it in @priv
  * @configure_rss: Set up default RSS configuration
  * @setup_stats_report: Set up DMA region for stats report (AdminQ only)
@@ -846,6 +848,8 @@ struct gve_ctrl_ops {
 	void (*unmap_db_bar)(struct gve_priv *priv);
 	void (*set_num_queues)(struct gve_priv *priv);
 	int (*set_num_ntfy_blks)(struct gve_priv *priv);
+	int (*request_db_info)(struct gve_priv *priv);
+	void (*free_db_resources)(struct gve_priv *priv);
 	int (*get_ptype_map)(struct gve_priv *priv);
 	int (*configure_rss)(struct gve_priv *priv,
 			     struct ethtool_rxfh_param *param);
@@ -1166,6 +1170,11 @@ static inline u32 gve_rx_idx_to_ntfy(struct gve_priv *priv, u32 queue_idx)
 	return (priv->num_ntfy_blks / 2) + queue_idx;
 }
 
+static inline u32 gve_ntfy_to_msix_idx(struct gve_priv *priv, u32 ntfy_blk_idx)
+{
+	return ntfy_blk_idx;
+}
+
 static inline bool gve_is_qpl(struct gve_priv *priv)
 {
 	return priv->queue_format == GVE_GQI_QPL_FORMAT ||
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index cb0e7005dd3c..f1ac55cc5b10 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1715,3 +1715,40 @@ void gve_adminq_set_num_queues(struct gve_priv *priv)
 						device_info->default_rx_queues,
 						priv->rx_cfg.num_queues);
 }
+
+int gve_adminq_request_db_info(struct gve_priv *priv)
+{
+	int err;
+	int i;
+
+	err = gve_adminq_configure_device_resources(priv,
+						    priv->counter_array_bus,
+						    priv->num_event_counters,
+						    priv->irq_db_indices_bus,
+						    priv->num_ntfy_blks);
+	if (unlikely(err)) {
+		dev_err(&priv->pdev->dev,
+			"could not setup device_resources: err=%d\n", err);
+		return -ENXIO;
+	}
+
+	for (i = 0; i < priv->num_ntfy_blks; i++)
+		priv->ntfy_blocks[i].irq_db_index =
+			&priv->irq_db_indices[i].index;
+	return 0;
+}
+
+void gve_adminq_free_db_resources(struct gve_priv *priv)
+{
+	int err;
+
+	/* Log error in deconfigure device, but don't fail. This is only ever
+	 * called as a reset is about to be triggered, so it would be redundant
+	 * to trigger a reset.
+	 */
+	err = gve_adminq_deconfigure_device_resources(priv);
+	if (err)
+		dev_err(&priv->pdev->dev,
+			"Could not deconfigure device resources: err=%d\n",
+			err);
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index d5f98a80be46..985b1aefea6e 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -657,5 +657,7 @@ int gve_adminq_map_db_bar(struct gve_priv *priv);
 void gve_adminq_unmap_db_bar(struct gve_priv *priv);
 int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv);
 void gve_adminq_set_num_queues(struct gve_priv *priv);
+int gve_adminq_request_db_info(struct gve_priv *priv);
+void gve_adminq_free_db_resources(struct gve_priv *priv);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index e96e353be04d..8f4a246cad18 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -204,6 +204,30 @@ static void gve_free_counter_array(struct gve_priv *priv)
 	priv->counter_array = NULL;
 }
 
+static int gve_alloc_irq_db_indices(struct gve_priv *priv)
+{
+	priv->irq_db_indices =
+		dma_alloc_coherent(&priv->pdev->dev,
+				   priv->num_ntfy_blks *
+				   sizeof(*priv->irq_db_indices),
+				   &priv->irq_db_indices_bus, GFP_KERNEL);
+	if (!priv->irq_db_indices)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void gve_free_irq_db_indices(struct gve_priv *priv)
+{
+	if (!priv->irq_db_indices)
+		return;
+
+	dma_free_coherent(&priv->pdev->dev, priv->num_ntfy_blks *
+			  sizeof(*priv->irq_db_indices),
+			  priv->irq_db_indices, priv->irq_db_indices_bus);
+	priv->irq_db_indices = NULL;
+}
+
 /* NIC requests to report stats */
 static void gve_stats_report_task(struct work_struct *work)
 {
@@ -428,15 +452,6 @@ int gve_napi_poll_dqo(struct napi_struct *napi, int budget)
 static void gve_free_notify_blocks(struct gve_priv *priv)
 {
 	pci_disable_msix(priv->pdev);
-	if (priv->irq_db_indices) {
-		dma_free_coherent(&priv->pdev->dev,
-				  priv->num_ntfy_blks *
-				  sizeof(*priv->irq_db_indices),
-				  priv->irq_db_indices,
-				  priv->irq_db_indices_bus);
-		priv->irq_db_indices = NULL;
-	}
-
 	kvfree(priv->ntfy_blocks);
 	priv->ntfy_blocks = NULL;
 	kvfree(priv->msix_vectors);
@@ -493,24 +508,14 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 			priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
 	}
 
-	priv->irq_db_indices =
-		dma_alloc_coherent(&priv->pdev->dev,
-				   priv->num_ntfy_blks *
-				   sizeof(*priv->irq_db_indices),
-				   &priv->irq_db_indices_bus, GFP_KERNEL);
-	if (!priv->irq_db_indices) {
-		err = -ENOMEM;
-		goto abort;
-	}
-
 	priv->ntfy_blocks = kvzalloc(priv->num_ntfy_blks *
 				     sizeof(*priv->ntfy_blocks), GFP_KERNEL);
 	if (!priv->ntfy_blocks) {
 		err = -ENOMEM;
 		goto abort;
 	}
-	return 0;
 
+	return 0;
 abort:
 	gve_free_notify_blocks(priv);
 	return err;
@@ -525,13 +530,14 @@ static void gve_teardown_notify_blocks(struct gve_priv *priv)
 
 	for (i = 0; i < priv->num_ntfy_blks; i++) {
 		struct gve_notify_block *block = &priv->ntfy_blocks[i];
+		int msix_idx = gve_ntfy_to_msix_idx(priv, i);
 
 		if (!block->irq_requested)
 			continue;
 
-		irq_set_affinity_hint(priv->msix_vectors[i].vector,
+		irq_set_affinity_hint(priv->msix_vectors[msix_idx].vector,
 				      NULL);
-		free_irq(priv->msix_vectors[i].vector, block);
+		free_irq(priv->msix_vectors[msix_idx].vector, block);
 		block->irq = 0;
 		block->irq_requested = false;
 	}
@@ -560,12 +566,11 @@ static int gve_setup_notify_blocks(struct gve_priv *priv)
 	}
 	priv->mgmt_irq_requested = true;
 
-	/* Setup the other blocks - the first n-1 vectors */
 	node_mask = gve_get_node_mask(priv);
 	cur_cpu = cpumask_first(node_mask);
 	for (i = 0; i < priv->num_ntfy_blks; i++) {
 		struct gve_notify_block *block = &priv->ntfy_blocks[i];
-		int msix_idx = i;
+		int msix_idx = gve_ntfy_to_msix_idx(priv, i);
 
 		snprintf(block->name, sizeof(block->name), "gve-ntfy-blk%d@pci:%s",
 			 i, pci_name(priv->pdev));
@@ -575,14 +580,13 @@ static int gve_setup_notify_blocks(struct gve_priv *priv)
 				  IRQF_NO_AUTOEN, block->name, block);
 		if (err) {
 			dev_err(&priv->pdev->dev,
-				"Failed to receive msix vector %d\n", i);
+				"Failed to receive msix vector %d\n", msix_idx);
 			goto abort;
 		}
 		block->irq = priv->msix_vectors[msix_idx].vector;
 		block->irq_requested = true;
 		irq_set_affinity_and_hint(block->irq,
 					  cpumask_of(cur_cpu));
-		block->irq_db_index = &priv->irq_db_indices[i].index;
 
 		cur_cpu = cpumask_next(cur_cpu, node_mask);
 		/* Wrap once CPUs in the node have been exhausted, or when
@@ -599,7 +603,6 @@ static int gve_setup_notify_blocks(struct gve_priv *priv)
 	return err;
 }
 
-
 static void gve_free_control_plane_resources(struct gve_priv *priv)
 {
 	bitmap_free(priv->xsk_pools);
@@ -608,9 +611,10 @@ static void gve_free_control_plane_resources(struct gve_priv *priv)
 	kvfree(priv->ptype_lut_dqo);
 	priv->ptype_lut_dqo = NULL;
 
-	gve_free_stats_report(priv);
-	gve_free_notify_blocks(priv);
+	gve_free_irq_db_indices(priv);
 	gve_free_counter_array(priv);
+	gve_free_notify_blocks(priv);
+	gve_free_stats_report(priv);
 	gve_free_rss_config_cache(priv);
 	gve_free_flow_rule_caches(priv);
 }
@@ -623,15 +627,18 @@ static int gve_alloc_control_plane_resources(struct gve_priv *priv)
 	if (err)
 		return err;
 	err = gve_alloc_rss_config_cache(priv);
-	if (err)
-		goto abort;
-	err = gve_alloc_counter_array(priv);
 	if (err)
 		goto abort;
 	err = gve_alloc_notify_blocks(priv);
 	if (err)
 		goto abort;
 	err = gve_alloc_stats_report(priv);
+	if (err)
+		goto abort;
+	err = gve_alloc_counter_array(priv);
+	if (err)
+		goto abort;
+	err = gve_alloc_irq_db_indices(priv);
 	if (err)
 		goto abort;
 
@@ -661,15 +668,9 @@ static int gve_setup_control_plane_resources(struct gve_priv *priv)
 	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 	int err;
 
-	err = gve_adminq_configure_device_resources(priv,
-						    priv->counter_array_bus,
-						    priv->num_event_counters,
-						    priv->irq_db_indices_bus,
-						    priv->num_ntfy_blks);
-	if (unlikely(err)) {
-		dev_err(&priv->pdev->dev,
-			"could not setup device_resources: err=%d\n", err);
-		err = -ENXIO;
+	err = ops->request_db_info(priv);
+	if (err) {
+		dev_err(&priv->pdev->dev, "Failed to get db info");
 		return err;
 	}
 
@@ -678,7 +679,7 @@ static int gve_setup_control_plane_resources(struct gve_priv *priv)
 		if (err) {
 			dev_err(&priv->pdev->dev,
 				"Failed to get ptype map: err=%d\n", err);
-			goto deconfigure_device;
+			goto free_db_resources;
 		}
 	}
 
@@ -708,8 +709,8 @@ static int gve_setup_control_plane_resources(struct gve_priv *priv)
 
 teardown_clock:
 	gve_teardown_clock(priv);
-deconfigure_device:
-	gve_adminq_deconfigure_device_resources(priv);
+free_db_resources:
+	ops->free_db_resources(priv);
 	return err;
 }
 
@@ -739,12 +740,7 @@ static void gve_teardown_control_plane_resources(struct gve_priv *priv)
 			dev_err(&priv->pdev->dev,
 				"Failed to detach stats report: err=%d\n", err);
 		gve_teardown_clock(priv);
-
-		err = gve_adminq_deconfigure_device_resources(priv);
-		if (err)
-			dev_err(&priv->pdev->dev,
-				"Could not deconfigure device resources: err=%d\n",
-				err);
+		ops->free_db_resources(priv);
 	}
 
 	gve_clear_device_resources_ok(priv);
@@ -2494,6 +2490,8 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
 	.reset_flow_rules	= gve_adminq_reset_flow_rules,
 	.setup_stats_report	= gve_adminq_report_stats,
 	.configure_rss		= gve_adminq_configure_rss,
+	.request_db_info	= gve_adminq_request_db_info,
+	.free_db_resources	= gve_adminq_free_db_resources,
 };
 
 static int gve_init_priv(struct gve_priv *priv)
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 13/15] gve: setup and teardown management interrupts

[Harshitha Ramamurthy]

From: Joshua Washington <joshwash@google.com>

Introduce control ops to setup/teardown control plane IRQs. Admin
queue-specific functionality is moved to admin queue files.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
 drivers/net/ethernet/google/gve/gve.h        |  4 +++
 drivers/net/ethernet/google/gve/gve_adminq.c | 32 ++++++++++++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h |  2 ++
 drivers/net/ethernet/google/gve/gve_main.c   | 28 ++++++-----------
 4 files changed, 47 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index f3cfc9d0cdec..352755660138 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -838,6 +838,8 @@ struct gve_device_info {
  *                     initialization.
  * @request_db_info: Request and store doorbell information into @priv
  * @free_db_resources: Free DMA memory holding doorbell info (AdminQ only)
+ * @setup_mgmt_irq: Setup control plane IRQ
+ * @teardown_mgmt_irq: Teardown control plane IRQ
  * @get_ptype_map: Learn packet type map from device and store it in @priv
  * @configure_rss: Set up default RSS configuration
  * @setup_stats_report: Set up DMA region for stats report (AdminQ only)
@@ -850,6 +852,8 @@ struct gve_ctrl_ops {
 	int (*set_num_ntfy_blks)(struct gve_priv *priv);
 	int (*request_db_info)(struct gve_priv *priv);
 	void (*free_db_resources)(struct gve_priv *priv);
+	int (*setup_mgmt_irq)(struct gve_priv *priv);
+	void (*teardown_mgmt_irq)(struct gve_priv *priv);
 	int (*get_ptype_map)(struct gve_priv *priv);
 	int (*configure_rss)(struct gve_priv *priv,
 			     struct ethtool_rxfh_param *param);
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index f1ac55cc5b10..4299a3931789 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1752,3 +1752,35 @@ void gve_adminq_free_db_resources(struct gve_priv *priv)
 			"Could not deconfigure device resources: err=%d\n",
 			err);
 }
+
+static irqreturn_t gve_mgmnt_intr(int irq, void *arg)
+{
+	struct gve_priv *priv = arg;
+
+	queue_work(priv->gve_wq, &priv->service_task);
+	return IRQ_HANDLED;
+}
+
+int gve_adminq_setup_mgmt_irq(struct gve_priv *priv)
+{
+	int err;
+
+	snprintf(priv->mgmt_msix_name, sizeof(priv->mgmt_msix_name),
+		 "gve-mgmnt@pci:%s", pci_name(priv->pdev));
+	err = request_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector,
+			  gve_mgmnt_intr, 0, priv->mgmt_msix_name, priv);
+	if (err)
+		return err;
+
+	priv->mgmt_irq_requested = true;
+
+	return 0;
+}
+
+void gve_adminq_teardown_mgmt_irq(struct gve_priv *priv)
+{
+	if (priv->mgmt_irq_requested) {
+		free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
+		priv->mgmt_irq_requested = false;
+	}
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 985b1aefea6e..ff656fb4f113 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -659,5 +659,7 @@ int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv);
 void gve_adminq_set_num_queues(struct gve_priv *priv);
 int gve_adminq_request_db_info(struct gve_priv *priv);
 void gve_adminq_free_db_resources(struct gve_priv *priv);
+int gve_adminq_setup_mgmt_irq(struct gve_priv *priv);
+void gve_adminq_teardown_mgmt_irq(struct gve_priv *priv);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 8f4a246cad18..f2dd82f6c254 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -291,14 +291,6 @@ static void gve_free_stats_report(struct gve_priv *priv)
 	priv->stats_report = NULL;
 }
 
-static irqreturn_t gve_mgmnt_intr(int irq, void *arg)
-{
-	struct gve_priv *priv = arg;
-
-	queue_work(priv->gve_wq, &priv->service_task);
-	return IRQ_HANDLED;
-}
-
 static irqreturn_t gve_intr(int irq, void *arg)
 {
 	struct gve_notify_block *block = arg;
@@ -523,6 +515,7 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv)
 
 static void gve_teardown_notify_blocks(struct gve_priv *priv)
 {
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 	int i;
 
 	if (!priv->ntfy_blocks)
@@ -542,29 +535,24 @@ static void gve_teardown_notify_blocks(struct gve_priv *priv)
 		block->irq_requested = false;
 	}
 
-	if (priv->mgmt_irq_requested) {
-		free_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector, priv);
-		priv->mgmt_irq_requested = false;
-	}
+	ops->teardown_mgmt_irq(priv);
 }
 
 static int gve_setup_notify_blocks(struct gve_priv *priv)
 {
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 	const struct cpumask *node_mask;
 	unsigned int cur_cpu;
 	int i;
 	int err;
 
-	/* Setup Management Vector  - the last vector */
-	snprintf(priv->mgmt_msix_name, sizeof(priv->mgmt_msix_name),
-		 "gve-mgmnt@pci:%s", pci_name(priv->pdev));
-	err = request_irq(priv->msix_vectors[priv->mgmt_msix_idx].vector,
-			  gve_mgmnt_intr, 0, priv->mgmt_msix_name, priv);
+	/* Setup Management Vector */
+	err = ops->setup_mgmt_irq(priv);
 	if (err) {
-		dev_err(&priv->pdev->dev, "Did not receive management vector.\n");
+		dev_err(&priv->pdev->dev,
+			"Did not receive management vector.\n");
 		return err;
 	}
-	priv->mgmt_irq_requested = true;
 
 	node_mask = gve_get_node_mask(priv);
 	cur_cpu = cpumask_first(node_mask);
@@ -2492,6 +2480,8 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
 	.configure_rss		= gve_adminq_configure_rss,
 	.request_db_info	= gve_adminq_request_db_info,
 	.free_db_resources	= gve_adminq_free_db_resources,
+	.setup_mgmt_irq		= gve_adminq_setup_mgmt_irq,
+	.teardown_mgmt_irq	= gve_adminq_teardown_mgmt_irq,
 };
 
 static int gve_init_priv(struct gve_priv *priv)
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 14/15] gve: add ctrl ops to for queue operations

[Harshitha Ramamurthy]

Add the next few control ops to

- create queues
- destroy queues

These changes are just moving existing code into ops, no functional
change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
- remove double logging in the create queues path

 drivers/net/ethernet/google/gve/gve.h        |  4 ++
 drivers/net/ethernet/google/gve/gve_adminq.c | 50 ++++++++++++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h |  3 +-
 drivers/net/ethernet/google/gve/gve_dqo.h    |  2 +-
 drivers/net/ethernet/google/gve/gve_main.c   | 48 +++++--------------
 5 files changed, 68 insertions(+), 39 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 352755660138..38b93238e2ca 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -844,6 +844,8 @@ struct gve_device_info {
  * @configure_rss: Set up default RSS configuration
  * @setup_stats_report: Set up DMA region for stats report (AdminQ only)
  * @reset_flow_rules: Flush all flow rules from device
+ * @create_queues: Sends commands to the device to create TX/RX queues.
+ * @destroy_queues: Sends commands to the device to destroy TX/RX queues.
  */
 struct gve_ctrl_ops {
 	int (*map_db_bar)(struct gve_priv *priv);
@@ -862,6 +864,8 @@ struct gve_ctrl_ops {
 				  dma_addr_t stats_report_addr,
 				  u64 interval_ms); /* AQ-specific */
 	int (*reset_flow_rules)(struct gve_priv *priv);
+	int (*create_queues)(struct gve_priv *priv);
+	int (*destroy_queues)(struct gve_priv *priv);
 };
 
 struct gve_priv {
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 4299a3931789..b04968257355 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -941,6 +941,30 @@ static void gve_set_default_rss_sizes(struct gve_priv *priv)
 	}
 }
 
+int gve_adminq_destroy_queues(struct gve_priv *priv)
+{
+	int num_tx_queues = gve_num_tx_queues(priv);
+	int err;
+
+	err = gve_adminq_destroy_tx_queues(priv, 0, num_tx_queues);
+	if (err) {
+		netif_err(priv, drv, priv->dev,
+			  "failed to destroy tx queues\n");
+		/* This failure will trigger a reset - no need to clean up */
+		return err;
+	}
+	netif_dbg(priv, drv, priv->dev, "destroyed tx queues\n");
+	err = gve_adminq_destroy_rx_queues(priv, priv->rx_cfg.num_queues);
+	if (err) {
+		netif_err(priv, drv, priv->dev,
+			  "failed to destroy rx queues\n");
+		/* This failure will trigger a reset - no need to clean up */
+		return err;
+	}
+	netif_dbg(priv, drv, priv->dev, "destroyed rx queues\n");
+	return err;
+}
+
 static void gve_enable_supported_features(struct gve_priv *priv,
 					  u32 supported_features_mask,
 					  const struct gve_device_option_jumbo_frames
@@ -1784,3 +1808,29 @@ void gve_adminq_teardown_mgmt_irq(struct gve_priv *priv)
 		priv->mgmt_irq_requested = false;
 	}
 }
+
+int gve_adminq_create_queues(struct gve_priv *priv)
+{
+	int num_tx_queues = gve_num_tx_queues(priv);
+	int err;
+
+	err = gve_adminq_create_tx_queues(priv, 0, num_tx_queues);
+	if (err) {
+		netif_err(priv, drv, priv->dev, "failed to create %d tx queues\n",
+			  num_tx_queues);
+		return err;
+	}
+	netif_dbg(priv, drv, priv->dev, "created %d tx queues\n",
+		  num_tx_queues);
+
+	err = gve_adminq_create_rx_queues(priv, priv->rx_cfg.num_queues);
+	if (err) {
+		netif_err(priv, drv, priv->dev, "failed to create %d rx queues\n",
+			  priv->rx_cfg.num_queues);
+		return err;
+	}
+	netif_dbg(priv, drv, priv->dev, "created %d rx queues\n",
+		  priv->rx_cfg.num_queues);
+
+	return err;
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index ff656fb4f113..03e8318f7327 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -628,6 +628,8 @@ int gve_adminq_configure_device_resources(struct gve_priv *priv,
 					  dma_addr_t db_array_bus_addr,
 					  u32 num_ntfy_blks);
 int gve_adminq_deconfigure_device_resources(struct gve_priv *priv);
+int gve_adminq_create_queues(struct gve_priv *priv);
+int gve_adminq_destroy_queues(struct gve_priv *priv);
 int gve_adminq_create_tx_queues(struct gve_priv *priv, u32 start_id, u32 num_queues);
 int gve_adminq_destroy_tx_queues(struct gve_priv *priv, u32 start_id, u32 num_queues);
 int gve_adminq_create_single_rx_queue(struct gve_priv *priv, u32 queue_index);
@@ -661,5 +663,4 @@ int gve_adminq_request_db_info(struct gve_priv *priv);
 void gve_adminq_free_db_resources(struct gve_priv *priv);
 int gve_adminq_setup_mgmt_irq(struct gve_priv *priv);
 void gve_adminq_teardown_mgmt_irq(struct gve_priv *priv);
-
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_dqo.h b/drivers/net/ethernet/google/gve/gve_dqo.h
index 5871f773f0c7..ce402020dff6 100644
--- a/drivers/net/ethernet/google/gve/gve_dqo.h
+++ b/drivers/net/ethernet/google/gve/gve_dqo.h
@@ -66,7 +66,7 @@ void gve_rx_write_doorbell_dqo(const struct gve_priv *priv, int queue_idx);
 void gve_xdp_tx_flush_dqo(struct gve_priv *priv, u32 xdp_qid);
 
 static inline void
-gve_tx_put_doorbell_dqo(const struct gve_priv *priv,
+gve_tx_put_doorbell_dqo(struct gve_priv *priv,
 			const struct gve_queue_resources *q_resources, u32 val)
 {
 	u64 index;
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index f2dd82f6c254..484f5a54a408 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -871,33 +871,15 @@ static int gve_unregister_qpls(struct gve_priv *priv)
 
 static int gve_create_rings(struct gve_priv *priv)
 {
-	int num_tx_queues = gve_num_tx_queues(priv);
 	int err;
 	int i;
 
-	err = gve_adminq_create_tx_queues(priv, 0, num_tx_queues);
-	if (err) {
-		netif_err(priv, drv, priv->dev, "failed to create %d tx queues\n",
-			  num_tx_queues);
-		/* This failure will trigger a reset - no need to clean
-		 * up
-		 */
-		return err;
-	}
-	netif_dbg(priv, drv, priv->dev, "created %d tx queues\n",
-		  num_tx_queues);
-
-	err = gve_adminq_create_rx_queues(priv, priv->rx_cfg.num_queues);
-	if (err) {
-		netif_err(priv, drv, priv->dev, "failed to create %d rx queues\n",
-			  priv->rx_cfg.num_queues);
-		/* This failure will trigger a reset - no need to clean
-		 * up
-		 */
+	err = priv->ctrl_ops->create_queues(priv);
+	/* This failure will trigger a reset - no need to clean
+	 * up
+	 */
+	if (err)
 		return err;
-	}
-	netif_dbg(priv, drv, priv->dev, "created %d rx queues\n",
-		  priv->rx_cfg.num_queues);
 
 	if (gve_is_gqi(priv)) {
 		/* Rx data ring has been prefilled with packet buffers at queue
@@ -1052,26 +1034,16 @@ static int gve_queues_mem_alloc(struct gve_priv *priv,
 
 static int gve_destroy_rings(struct gve_priv *priv)
 {
-	int num_tx_queues = gve_num_tx_queues(priv);
 	int err;
 
-	err = gve_adminq_destroy_tx_queues(priv, 0, num_tx_queues);
+	err = priv->ctrl_ops->destroy_queues(priv);
+
 	if (err) {
-		netif_err(priv, drv, priv->dev,
-			  "failed to destroy tx queues\n");
 		/* This failure will trigger a reset - no need to clean up */
-		return err;
-	}
-	netif_dbg(priv, drv, priv->dev, "destroyed tx queues\n");
-	err = gve_adminq_destroy_rx_queues(priv, priv->rx_cfg.num_queues);
-	if (err) {
 		netif_err(priv, drv, priv->dev,
-			  "failed to destroy rx queues\n");
-		/* This failure will trigger a reset - no need to clean up */
-		return err;
+			  "failed to destroy queues\n");
 	}
-	netif_dbg(priv, drv, priv->dev, "destroyed rx queues\n");
-	return 0;
+	return err;
 }
 
 static void gve_queues_mem_free(struct gve_priv *priv,
@@ -2482,6 +2454,8 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
 	.free_db_resources	= gve_adminq_free_db_resources,
 	.setup_mgmt_irq		= gve_adminq_setup_mgmt_irq,
 	.teardown_mgmt_irq	= gve_adminq_teardown_mgmt_irq,
+	.create_queues		= gve_adminq_create_queues,
+	.destroy_queues		= gve_adminq_destroy_queues,
 };
 
 static int gve_init_priv(struct gve_priv *priv)
-- 
2.55.0.571.g244d577d93-goog

[PATCH net-next v3 15/15] gve: add link status/speed ctrl ops

[Harshitha Ramamurthy]

From: Joshua Washington <joshwash@google.com>

Refactor link status check to use a control plane op. Introduce
new op for retrieving the link status in AQ mode. This op reads
the link status from the device status register and stores the
value in priv.

Also add an op for retrieving link speed in AQ mode which calls into
gve_adminq_report_link_speed.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
Changes in v3:
  - Fix kdoc typo ("set link status" -> "set link speed")
  - Copy link speed into local variable instead of reading twice to
    prevent TOCTOU issue.

 drivers/net/ethernet/google/gve/gve.h         |  5 ++++
 drivers/net/ethernet/google/gve/gve_adminq.c  | 10 +++++++
 drivers/net/ethernet/google/gve/gve_adminq.h  |  1 +
 drivers/net/ethernet/google/gve/gve_ethtool.c |  3 +--
 drivers/net/ethernet/google/gve/gve_main.c    | 26 ++++++++++++-------
 5 files changed, 33 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 38b93238e2ca..8e34e9f75006 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -846,6 +846,8 @@ struct gve_device_info {
  * @reset_flow_rules: Flush all flow rules from device
  * @create_queues: Sends commands to the device to create TX/RX queues.
  * @destroy_queues: Sends commands to the device to destroy TX/RX queues.
+ * @report_link_status: Set link status into @priv->link_up
+ * @report_link_speed: Set link speed into @priv->link_speed
  */
 struct gve_ctrl_ops {
 	int (*map_db_bar)(struct gve_priv *priv);
@@ -866,6 +868,8 @@ struct gve_ctrl_ops {
 	int (*reset_flow_rules)(struct gve_priv *priv);
 	int (*create_queues)(struct gve_priv *priv);
 	int (*destroy_queues)(struct gve_priv *priv);
+	int (*report_link_status)(struct gve_priv *priv);
+	int (*report_link_speed)(struct gve_priv *priv);
 };
 
 struct gve_priv {
@@ -967,6 +971,7 @@ struct gve_priv {
 
 	/* Gvnic device link speed from hypervisor. */
 	u64 link_speed;
+	bool link_up;
 	bool up_before_suspend; /* True if dev was up before suspend */
 
 	bool mgmt_irq_requested;
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index b04968257355..fe975d1547b2 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1834,3 +1834,13 @@ int gve_adminq_create_queues(struct gve_priv *priv)
 
 	return err;
 }
+
+int gve_adminq_report_link_status(struct gve_priv *priv)
+{
+	u32 status;
+
+	status = ioread32be(&priv->reg_bar0->device_status);
+	WRITE_ONCE(priv->link_up,
+		   !!(GVE_DEVICE_STATUS_LINK_STATUS_MASK & status));
+	return 0;
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 03e8318f7327..82413369dec9 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -643,6 +643,7 @@ int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 			    dma_addr_t stats_report_addr, u64 interval);
 int gve_adminq_verify_driver_compatibility(struct gve_priv *priv);
 int gve_adminq_get_device_properties(struct gve_priv *priv);
+int gve_adminq_report_link_status(struct gve_priv *priv);
 int gve_adminq_report_link_speed(struct gve_priv *priv);
 int gve_adminq_add_flow_rule(struct gve_priv *priv, struct gve_adminq_flow_rule *rule, u32 loc);
 int gve_adminq_del_flow_rule(struct gve_priv *priv, u32 loc);
diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index dd1c44fedc77..a3220c651438 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -749,12 +749,11 @@ static int gve_get_link_ksettings(struct net_device *netdev,
 	int err = 0;
 
 	if (priv->link_speed == 0)
-		err = gve_adminq_report_link_speed(priv);
+		err = priv->ctrl_ops->report_link_speed(priv);
 
 	cmd->base.speed = priv->link_speed;
 
 	cmd->base.duplex = DUPLEX_FULL;
-
 	return err;
 }
 
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 484f5a54a408..19e4b56238a0 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -1502,15 +1502,18 @@ static int gve_close(struct net_device *dev)
 	return err;
 }
 
-static void gve_handle_link_status(struct gve_priv *priv, bool link_status)
+static void gve_handle_link_status(struct gve_priv *priv)
 {
+	bool link_up;
+
 	if (!gve_get_napi_enabled(priv))
 		return;
 
-	if (link_status == netif_carrier_ok(priv->dev))
+	link_up = READ_ONCE(priv->link_up);
+	if (link_up == netif_carrier_ok(priv->dev))
 		return;
 
-	if (link_status) {
+	if (link_up) {
 		netdev_info(priv->dev, "Device link is up.\n");
 		netif_carrier_on(priv->dev);
 	} else {
@@ -1537,7 +1540,6 @@ static int gve_set_xdp(struct gve_priv *priv, struct bpf_prog *prog,
 {
 	struct bpf_prog *old_prog;
 	int err = 0;
-	u32 status;
 
 	old_prog = READ_ONCE(priv->xdp_prog);
 	if (!netif_running(priv->dev)) {
@@ -1564,8 +1566,8 @@ static int gve_set_xdp(struct gve_priv *priv, struct bpf_prog *prog,
 		bpf_prog_put(old_prog);
 
 out:
-	status = ioread32be(&priv->reg_bar0->device_status);
-	gve_handle_link_status(priv, GVE_DEVICE_STATUS_LINK_STATUS_MASK & status);
+	priv->ctrl_ops->report_link_status(priv);
+	gve_handle_link_status(priv);
 	return err;
 }
 
@@ -1998,11 +2000,11 @@ static void gve_turnup(struct gve_priv *priv)
 
 static void gve_turnup_and_check_status(struct gve_priv *priv)
 {
-	u32 status;
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 
 	gve_turnup(priv);
-	status = ioread32be(&priv->reg_bar0->device_status);
-	gve_handle_link_status(priv, GVE_DEVICE_STATUS_LINK_STATUS_MASK & status);
+	ops->report_link_status(priv);
+	gve_handle_link_status(priv);
 }
 
 static struct gve_notify_block *gve_get_tx_notify_block(struct gve_priv *priv,
@@ -2326,12 +2328,14 @@ static void gve_service_task(struct work_struct *work)
 {
 	struct gve_priv *priv = container_of(work, struct gve_priv,
 					     service_task);
+	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
 	u32 status = ioread32be(&priv->reg_bar0->device_status);
 
 	gve_handle_status(priv, status);
 
 	gve_handle_reset(priv);
-	gve_handle_link_status(priv, GVE_DEVICE_STATUS_LINK_STATUS_MASK & status);
+	ops->report_link_status(priv);
+	gve_handle_link_status(priv);
 }
 
 static void gve_set_netdev_xdp_features(struct gve_priv *priv)
@@ -2456,6 +2460,8 @@ static const struct gve_ctrl_ops gve_adminq_ops = {
 	.teardown_mgmt_irq	= gve_adminq_teardown_mgmt_irq,
 	.create_queues		= gve_adminq_create_queues,
 	.destroy_queues		= gve_adminq_destroy_queues,
+	.report_link_status	= gve_adminq_report_link_status,
+	.report_link_speed	= gve_adminq_report_link_speed,
 };
 
 static int gve_init_priv(struct gve_priv *priv)
-- 
2.55.0.571.g244d577d93-goog

Re: [PATCH net-next v3 01/15] gve: don't pass in unused parameter to gve_adminq_free

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Memory leak of the adminq DMA pool during device reset due to an early return in gve_adminq_free().
--

--- Patch [1]: [PATCH net-next v3 01/15] gve: don't pass in unused parameter to gve_adminq_free ---
commit 3b6d21bb1589b652e4e7777b1b6be55fff25b9f0
Author: Harshitha Ramamurthy <hramamurthy@google.com>

gve: don't pass in unused parameter to gve_adminq_free

This commit cleans up gve_adminq_free by removing an unused parameter.

> diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
> index 08587bf40ed4a..70ffed8b52c3d 100644
> --- a/drivers/net/ethernet/google/gve/gve_adminq.c
> +++ b/drivers/net/ethernet/google/gve/gve_adminq.c
[ ... ]
> @@ -385,7 +385,7 @@ void gve_adminq_release(struct gve_priv *priv)
>  	gve_clear_admin_queue_ok(priv);
>  }
>  
> -void gve_adminq_free(struct device *dev, struct gve_priv *priv)
> +void gve_adminq_free(struct gve_priv *priv)
>  {
>  	if (!gve_get_admin_queue_ok(priv))
>  		return;

[Severity: High]
This isn't a bug introduced by this patch, but does returning early here
cause a memory leak of the adminq DMA pool during a device reset?

When a reset happens, gve_reset_and_teardown() calls gve_trigger_reset()
which clears the admin queue OK flag. It then calls
gve_teardown_priv_resources() which calls gve_adminq_free():

drivers/net/ethernet/google/gve/gve_main.c:gve_reset_and_teardown() {
	...
	gve_trigger_reset(priv);
	/* With the reset having already happened, close cannot fail */
	if (was_up)
		gve_close(priv->dev);
	gve_teardown_priv_resources(priv);
	...
}

Because the OK flag is cleared, gve_adminq_free() returns early, skipping
the dma_pool_free() and dma_pool_destroy() calls, leaking the allocations.
During subsequent recovery, gve_init_priv() calls gve_adminq_alloc() which
overwrites priv->adminq_pool and priv->adminq with new allocations.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=1

Re: [PATCH net-next v3 04/15] gve: add struct gve_device_info to hold device properties

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The refactored gve_set_buf_sizes() logic silently ignores hardware-requested max_rx_buffer_size limits if they are smaller than the default.
--

--- Patch [4]: [PATCH net-next v3 04/15] gve: add struct gve_device_info to hold device properties ---
commit 604b13a249f6db1d11e788325b47c9f96325ca0e
Author: Harshitha Ramamurthy <hramamurthy@google.com>

gve: add struct gve_device_info to hold device properties

In the current AdminQ mode, device properties are written into struct
gve_device_descriptor that is allocated in shared memory between the driver
and device. This patch introduces struct gve_device_info to hold all
properties negotiated in either mode to prepare for the upcoming MailboxQ
mode. Device initialization logic is refactored to use this new structure
without any intended functional changes.

> diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
> --- a/drivers/net/ethernet/google/gve/gve_main.c
> +++ b/drivers/net/ethernet/google/gve/gve_main.c

[ ... ]

> +static void gve_set_buf_sizes(struct gve_priv *priv)
> +{
> +	struct gve_device_info *device_info = &priv->device_info;
> +
> +	if (device_info->max_rx_buffer_size > priv->max_rx_buffer_size)
> +		priv->max_rx_buffer_size = device_info->max_rx_buffer_size;

[Severity: Medium]
Does this logic silently ignore hardware-requested buffer size limits if
they are smaller than the initial default?

Before this refactoring, gve_enable_supported_features() applied the
hardware limit unconditionally:

priv->max_rx_buffer_size =
    be16_to_cpu(dev_op_buffer_sizes->packet_buffer_size);

With this conditional check in gve_set_buf_sizes(), if the device advertises
a max_rx_buffer_size smaller than what priv->max_rx_buffer_size was initially
set to, the driver will ignore the hardware limit.

Could this cause the device configuration to fail or buffers to overflow if
the hardware cannot handle the larger default buffers?

> +
> +	if (gve_is_dqo(priv) &&
> +	    priv->max_rx_buffer_size > GVE_DEFAULT_RX_BUFFER_SIZE)
> +		priv->rx_cfg.packet_buffer_size = priv->max_rx_buffer_size;
> +
> +	if (device_info->header_buf_size)
> +		priv->header_buf_size = device_info->header_buf_size;
> +}

[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=4

Re: [PATCH net-next v3 08/15] gve: refactor gve_init_priv for reset path

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

Pre-existing issues:
- [High] AF_XDP zero-copy socket pool bindings are broken and their DMA mappings are leaked across device resets.
- [High] Concurrent use-after-free and NULL pointer dereference of `priv->stats_report` during `gve_stats_report_task`.
--

--- Patch [8]: [PATCH net-next v3 08/15] gve: refactor gve_init_priv for reset path ---
commit 02971463a0e35f7deed56d888e3c49b020365965
Author: Harshitha Ramamurthy <hramamurthy@google.com>
gve: refactor gve_init_priv for reset path

This patch refactors device initialization into distinct steps by introducing
gve_setup_device() and gve_adminq_init(). It reorganizes device properties
configuration to ensure gve_init_priv() is only called once, preparing the
driver for upcoming mailbox mode additions.

> diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
> --- a/drivers/net/ethernet/google/gve/gve_main.c
> +++ b/drivers/net/ethernet/google/gve/gve_main.c
[ ... ]
> @@ -2414,6 +2414,35 @@ static void gve_set_buf_sizes(struct gve_priv *priv)
>  		priv->header_buf_size = device_info->header_buf_size;
>  }
>  
> +static int gve_setup_device(struct gve_priv *priv)
> +{
> +	int err;
> +
> +	priv->num_registered_pages = 0;
> +
> +	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);

[Severity: High]
This isn't a bug introduced by this patch, but does this unconditionally
overwrite the existing AF_XDP zero-copy socket pool bindings across a reset?

When a reset occurs (e.g., via MTU change or watchdog timeout),
gve_setup_device() re-allocates priv->xsk_pools as a new, zeroed bitmap. The
old bitmap is freed during teardown, but the previously bound XSK pools do
not appear to be restored.

Consequently, when queues are restarted, wouldn't gve_get_xsk_pool() return
NULL, causing XDP zero-copy registration to be skipped and fall back to
standard memory models (PAGE_SHARED/PAGE_POOL)?

> +	if (!priv->xsk_pools) {
> +		err = -ENOMEM;
> +		goto err;
> +	}
> +
> +	gve_set_netdev_xdp_features(priv);
> +	if (!gve_is_gqi(priv))
> +		priv->dev->xdp_metadata_ops = &gve_xdp_metadata_ops;
> +
> +	err = gve_setup_device_resources(priv);
> +	if (err)
> +		goto err_free_xsk_bitmap;
> +
> +	return 0;
> +
> +err_free_xsk_bitmap:
> +	bitmap_free(priv->xsk_pools);
> +	priv->xsk_pools = NULL;
> +err:
> +	return err;
> +}

[Severity: High]
This is a pre-existing issue, but since this patch refactors the device setup
and reset recovery paths, could there be a race condition when tearing down
the stats report?

In gve_free_stats_report(), the stats timer is deleted and the stats_report
DMA memory is freed. However, it does not call
cancel_work_sync(&priv->stats_report_task).

If the gve_stats_report_task executes asynchronously on priv->gve_wq during
or immediately after the memory is freed, could it lead to a use-after-free
or NULL pointer dereference when accessing priv->stats_report->stats in
gve_handle_report_stats()?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=8

Re: [PATCH net-next v3 09/15] gve: simplify reset logic

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [High] The `while (!service_task_enabled)` loop in `gve_recover` forcefully enables `service_task`, overriding concurrent `disable_work_sync` calls from PM suspend, allowing the task to run while the device is suspended.

Pre-existing issues:
- [High] `gve_xsk_pool_enable` and `gve_xsk_pool_disable` unconditionally dereference `priv->xsk_pools`, which is NULL if the device failed to recover from a reset.
--

--- Patch [9]: [PATCH net-next v3 09/15] gve: simplify reset logic ---
commit e14381443089f802adbf14cabd9d5e8b89337630
Author: Joshua Washington <joshwash@google.com>
Subject: gve: simplify reset logic

This commit simplifies the GVE reset logic by removing recursive resets,
avoiding resets during teardown, and separating control plane resource
allocation from device setup. Shared resources are now retained until the
hardware reset completes to prevent premature release.

> diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
> index 6f04eefd04166..578520e107930 100644
> --- a/drivers/net/ethernet/google/gve/gve_main.c
> +++ b/drivers/net/ethernet/google/gve/gve_main.c
> @@ -591,7 +591,22 @@ static void gve_free_notify_blocks(struct gve_priv *priv)
>  	priv->msix_vectors = NULL;
>  }
>  
> -static int gve_setup_device_resources(struct gve_priv *priv)
> +static void gve_free_control_plane_resources(struct gve_priv *priv)
> +{
> +	bitmap_free(priv->xsk_pools);
> +	priv->xsk_pools = NULL;

[Severity: High]
This is a pre-existing issue, but does the driver safely handle a NULL
xsk_pools bitmap if recovery fails?

If gve_recover() fails during a reset (for example, if gve_setup_device()
fails), priv->xsk_pools is left as NULL because it is freed here during
teardown.

Since the netdev remains registered, a subsequent AF_XDP socket bind from
userspace could call gve_xsk_pool_enable() or gve_xsk_pool_disable().
These functions unconditionally dereference the bitmap:

drivers/net/ethernet/google/gve/gve_main.c:gve_xsk_pool_enable() {
    ...
    set_bit(qid, priv->xsk_pools);
    ...
}

Could this lead to an immediate NULL pointer dereference if a user with
sufficient privileges configures AF_XDP on the failed device?

[ ... ]

> -static int gve_reset_recovery(struct gve_priv *priv, bool was_up)
> +static int gve_recover(struct gve_priv *priv, bool setup_queues)
>  {
> +	bool service_task_enabled = false;
>  	int err;
>  
>  	err = gve_adminq_init(priv);
>  	if (err) {
>  		dev_err(&priv->pdev->dev,
>  			"Failed to alloc admin queue: err=%d\n", err);
> -		goto err;
> +		goto teardown_device;
>  	}
>  
>  	err = gve_adminq_verify_driver_compatibility(priv);
>  	if (err) {
>  		dev_err(&priv->pdev->dev,
>  			"Could not verify driver compatibility: err=%d\n", err);
> -		goto err_free_adminq;
> +		goto teardown_device;
>  	}
>  
>  	err = gve_setup_device(priv);
>  	if (err)
> -		goto err_free_adminq;
> -	if (was_up) {
> +		goto teardown_device;
> +
> +	/* In the case of cascading failures, the disable count could be greater
> +	 * than 1. The service task must be enabled before starting queues.
> +	 */
> +	while (!service_task_enabled)
> +		service_task_enabled = enable_work(&priv->service_task);

[Severity: High]
Could this loop override a concurrent suspend operation?

If a device reset (gve_reset) runs concurrently with power management
suspend (gve_suspend), gve_suspend increments the service task's disable
count via disable_work_sync() and waits for the rtnl_lock.

If gve_reset holds the rtnl_lock and executes gve_recover(), it drops the
disable count to 0 in this loop. Once gve_reset finishes, gve_suspend
acquires the lock, completes teardown, and suspends the device to D3.

Since the service_task is now enabled, couldn't it be scheduled to run while
the device is suspended? This might result in an MMIO read on a D3 state
device, causing a kernel panic or PCIe AER fatal error.

[ ... ]

> @@ -3017,16 +3025,14 @@ static int gve_suspend(struct device *dev)
>  	struct gve_priv *priv = netdev_priv(netdev);
>  	bool was_up = netif_running(priv->dev);
>  
> +	disable_work_sync(&priv->service_task);
> +
>  	priv->suspend_cnt++;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=9

Re: [PATCH net-next v3 10/15] gve: add gve_ctrl_ops for gve initialization/teardown sequences

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Incomplete abstraction of `configure_rss` leaves a direct dependency on AdminQ in the ethtool path.
--

--- Patch [10]: [PATCH net-next v3 10/15] gve: add gve_ctrl_ops for gve initialization/teardown sequences ---
commit fa76396ec69ce2dfc47469d3f87210437b9df3b5
Author: Joshua Washington <joshwash@google.com>

gve: add gve_ctrl_ops for gve initialization/teardown sequences

Driver initialization and teardown involve a number of control plane
operations that need to be defined for gve_probe to operate in both
mailbox and adminq modes.

> diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
> index 578520e107930..c347661faac00 100644
> --- a/drivers/net/ethernet/google/gve/gve_main.c
> +++ b/drivers/net/ethernet/google/gve/gve_main.c

[ ... ]

> @@ -1809,6 +1814,7 @@ static int gve_xdp(struct net_device *dev, struct netdev_bpf *xdp)
>  
>  int gve_init_rss_config(struct gve_priv *priv, u16 num_queues)
>  {
> +	const struct gve_ctrl_ops *ops = priv->ctrl_ops;
>  	struct gve_rss_config *rss_config = &priv->rss_config;
>  	struct ethtool_rxfh_param rxfh = {0};
>  	u16 i;
> @@ -1824,15 +1830,17 @@ int gve_init_rss_config(struct gve_priv *priv, u16 num_queues)
>  
>  	rxfh.hfunc = ETH_RSS_HASH_TOP;
>  
> -	return gve_adminq_configure_rss(priv, &rxfh);
> +	return ops->configure_rss(priv, &rxfh);
>  }

[Severity: Medium]
Since this abstracts the RSS configuration for non-adminq modes, does the
ethtool configuration path also need to be updated to use this new abstraction?

Currently, gve_set_rxfh() in drivers/net/ethernet/google/gve/gve_ethtool.c
still calls the adminq-specific function directly:

drivers/net/ethernet/google/gve/gve_ethtool.c:gve_set_rxfh() {
	...
	if (!priv->rss_key_size || !priv->rss_lut_size)
		return -EOPNOTSUPP;

	err = gve_adminq_configure_rss(priv, rxfh);
	if (err) {
		NL_SET_ERR_MSG_MOD(extack, "Fail to configure RSS config");
		return err;
	}
	...
}

Could this cause issues when configuring RSS via ethtool on a device using
a different backend, since it bypasses ops->configure_rss()?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=10

Re: [PATCH net-next v3 12/15] gve: introduce new methods to handle IRQ doorbells

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Mismatch between commit message, code comments, and actual implementation for `free_db_resources`.
--

--- Patch [12]: [PATCH net-next v3 12/15] gve: introduce new methods to handle IRQ doorbells ---
commit d17b52783c19c7cb12a008b8dab81756b1b45ee7
Author: Joshua Washington <joshwash@google.com>

gve: introduce new methods to handle IRQ doorbells

This commit introduces new methods to struct gve_ctrl_ops for configuring
device resources like counter arrays and IRQ doorbell indices. It shifts
doorbell management and GQ ring counter setup from notify_block methods
into these new callbacks.

>   - Similar to above, move free logic out of
>     gve_adminq_free_db_resources() and rename all introduced methods
>     from *free_db_resources to *release_db_resources to reflect the
>     behavioral change.

[Severity: Medium]
This isn't a bug, but the changelog states the methods were renamed to
*release_db_resources. The code still uses the name *free_db_resources.

> diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
> index 8766ea62baf17..f3cfc9d0cdec6 100644
> --- a/drivers/net/ethernet/google/gve/gve.h
> +++ b/drivers/net/ethernet/google/gve/gve.h
> @@ -836,6 +836,8 @@ struct gve_device_info {
>   *                  structures stored in @priv to be used during initialization.
>   * @set_num_ntfy_blks: Sets no. of vectors into @priv to be used during
>   *                     initialization.
> + * @request_db_info: Request and store doorbell information into @priv
> + * @free_db_resources: Free DMA memory holding doorbell info (AdminQ only)

[Severity: Medium]
Is this comment still accurate? Since the logic to free DMA memory was moved
out of gve_adminq_free_db_resources(), it appears this method only
deconfigures device resources now, and the DMA memory is freed separately
by gve_free_irq_db_indices().

>   * @get_ptype_map: Learn packet type map from device and store it in @priv
>   * @configure_rss: Set up default RSS configuration

[ ... ]

> diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
> index cb0e7005dd3ca..f1ac55cc5b10f 100644
> --- a/drivers/net/ethernet/google/gve/gve_adminq.c
> +++ b/drivers/net/ethernet/google/gve/gve_adminq.c

[ ... ]

> +void gve_adminq_free_db_resources(struct gve_priv *priv)
> +{
> +	int err;
> +
> +	/* Log error in deconfigure device, but don't fail. This is only ever
> +	 * called as a reset is about to be triggered, so it would be redundant
> +	 * to trigger a reset.
> +	 */
> +	err = gve_adminq_deconfigure_device_resources(priv);
> +	if (err)
> +		dev_err(&priv->pdev->dev,
> +			"Could not deconfigure device resources: err=%d\n",
> +			err);
> +}

[Severity: Medium]
Should this function be named gve_adminq_release_db_resources() instead, to
match the intention stated in the changelog?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=12

Re: [PATCH net-next v3 14/15] gve: add ctrl ops to for queue operations

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The patch introduces double logging for queue destruction failures, despite the v3 changelog explicitly stating the intention to remove double logging in the create queues path.
--

--- Patch [14]: [PATCH net-next v3 14/15] gve: add ctrl ops to for queue operations ---
commit a53278495dc17ec056277ce3cbdbf3f6c7da4035
Author: Harshitha Ramamurthy <hramamurthy@google.com>

gve: add ctrl ops to for queue operations

This commit abstracts the creation and destruction of queues into control
operations for the driver. The patch changelog for v3 explicitly notes
that double logging was removed in the create queues path.

> diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
> --- a/drivers/net/ethernet/google/gve/gve_adminq.c
> +++ b/drivers/net/ethernet/google/gve/gve_adminq.c

[ ... ]

> +int gve_adminq_destroy_queues(struct gve_priv *priv)
> +{
> +	int num_tx_queues = gve_num_tx_queues(priv);
> +	int err;
> +
> +	err = gve_adminq_destroy_tx_queues(priv, 0, num_tx_queues);
> +	if (err) {
> +		netif_err(priv, drv, priv->dev,
> +			  "failed to destroy tx queues\n");
> +		/* This failure will trigger a reset - no need to clean up */
> +		return err;
> +	}

[ ... ]

> +	err = gve_adminq_destroy_rx_queues(priv, priv->rx_cfg.num_queues);
> +	if (err) {
> +		netif_err(priv, drv, priv->dev,
> +			  "failed to destroy rx queues\n");
> +		/* This failure will trigger a reset - no need to clean up */
> +		return err;
> +	}
> +	netif_dbg(priv, drv, priv->dev, "destroyed rx queues\n");
> +	return err;
> +}

[ ... ]

> diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
> --- a/drivers/net/ethernet/google/gve/gve_main.c
> +++ b/drivers/net/ethernet/google/gve/gve_main.c

[ ... ]

> @@ -1052,26 +1034,16 @@ static int gve_queues_mem_alloc(struct gve_priv *priv,
>  
>  static int gve_destroy_rings(struct gve_priv *priv)
>  {
> -	int num_tx_queues = gve_num_tx_queues(priv);
>  	int err;
>  
> -	err = gve_adminq_destroy_tx_queues(priv, 0, num_tx_queues);
> +	err = priv->ctrl_ops->destroy_queues(priv);
> +
>  	if (err) {
> -		netif_err(priv, drv, priv->dev,
> -			  "failed to destroy tx queues\n");
>  		/* This failure will trigger a reset - no need to clean up */
> -		return err;
> -	}
> -	netif_dbg(priv, drv, priv->dev, "destroyed tx queues\n");
> -	err = gve_adminq_destroy_rx_queues(priv, priv->rx_cfg.num_queues);
> -	if (err) {
>  		netif_err(priv, drv, priv->dev,
> -			  "failed to destroy rx queues\n");
> -		/* This failure will trigger a reset - no need to clean up */
> -		return err;
> +			  "failed to destroy queues\n");
>  	}

[Severity: Low]
The v3 changelog notes that double logging was removed for the queue creation
path. Does this code unintentionally leave double logging in place for the
queue destruction path?

Since the underlying control operation, gve_adminq_destroy_queues(), now
prints specific error messages when tx or rx queue destruction fails,
this outer netif_err() in gve_destroy_rings() appears to log redundantly.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=14

Re: [PATCH net-next v3 15/15] gve: add link status/speed ctrl ops

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

Pre-existing issues:
- [High] Ethtool operations can trigger a Use-After-Free on the admin queue memory if the device fails a reset or is torn down.
- [High] Temporary DMA buffer is freed on command timeout without canceling the hardware operation, leading to potential DMA-after-free memory corruption.
--

--- Patch [15]: [PATCH net-next v3 15/15] gve: add link status/speed ctrl ops ---
commit 4e6d0e28f03e61bed3005f52fb8ced4997d772eb
Author: Joshua Washington <joshwash@google.com>

gve: add link status/speed ctrl ops
    
Refactor link status check to use a control plane op. Introduce
new op for retrieving the link status in AQ mode, and add an op
for retrieving link speed which calls into gve_adminq_report_link_speed.

> diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
> --- a/drivers/net/ethernet/google/gve/gve_ethtool.c
> +++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
> @@ -749,12 +749,11 @@ static int gve_get_link_ksettings(struct net_device *netdev,
>  	int err = 0;
>  
>  	if (priv->link_speed == 0)
> -		err = gve_adminq_report_link_speed(priv);
> +		err = priv->ctrl_ops->report_link_speed(priv);

[Severity: High]
This isn't a bug introduced by this patch, but I wanted to ask about the
lifecycle of the admin queue here.

When the device is suspended or fails a reset, gve_teardown_device()
is called, which invokes gve_adminq_free(). This frees priv->adminq and
destroys the DMA pool, but leaves the priv->adminq pointer dangling.

If ethtool triggers gve_get_link_ksettings() while the device is in this
state, we unconditionally call report_link_speed(). This results in:

gve_get_link_ksettings()
  priv->ctrl_ops->report_link_speed() (gve_adminq_report_link_speed)
    gve_adminq_execute_cmd()
      gve_adminq_issue_cmd()

In gve_adminq_issue_cmd(), the freed priv->adminq buffer is accessed and
written to without checking gve_get_admin_queue_ok().

Can this lead to a use-after-free if ethtool accesses the link settings
during a failed reset or after device teardown?

[Severity: High]
This is also a pre-existing issue, but while looking at
gve_adminq_report_link_speed() being called here, I noticed a potential
DMA-after-free.

In gve_adminq_report_link_speed(), a temporary buffer is allocated via
dma_alloc_coherent() and its bus address is passed to the NIC. If
gve_adminq_execute_cmd() times out (for example, if
gve_adminq_kick_and_wait() returns -ENOTRECOVERABLE), the function
immediately calls dma_free_coherent() on the error path to free the region.

Since the hardware is not reset or instructed to abort the command before
the memory is freed, what happens if the hardware later wakes up and
executes the delayed command?

Will it DMA the 8-byte link speed into the freed memory, potentially
corrupting whatever structure now occupies that address?

>  	cmd->base.speed = priv->link_speed;
>  
>  	cmd->base.duplex = DUPLEX_FULL;
> -
>  	return err;
>  }

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803184630.3813311-1-hramamurthy@google.com?part=15

Re: [PATCH net-next v3 09/15] gve: simplify reset logic

[Jakub Kicinski]

On Mon,  3 Aug 2026 18:46:24 +0000 Harshitha Ramamurthy wrote:
> -static void gve_trigger_reset(struct gve_priv *priv);
> -
> -static void gve_teardown_device_resources(struct gve_priv *priv)
> +/**
> + * Request the device to release any allocated shared resources.
> + *
> + * If any part of the teardown step fails, the failure is documented, but is
> + * otherwise ignored. It is expected that a device reset is triggered
> + * immediately after tearing down device resources, which would clear any
> + * lingering state on the device.
> + */
> +static void gve_teardown_control_plane_resources(struct gve_priv *priv)
>  {

Triggers a warning on W=1 builds:

Warning: drivers/net/ethernet/google/gve/gve_main.c:705 This comment starts with '/**', but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
 * Request the device to release any allocated shared resources.

Re: [PATCH net-next v3 04/15] gve: add struct gve_device_info to hold device properties

[Przemek Kitszel]

On 8/3/26 20:46, Harshitha Ramamurthy wrote:
> In the current AdminQ mode, device properties are written into
> struct gve_device_descriptor that is allocated in shared memory
> between the driver and device. In the upcoming MailboxQ mode,
> these properties will be returned in the response of a mailbox
> message. Hence, add struct gve_device_info as the structure that
> holds all the properties that are negotiated with the device in
> either mode.
> 
> Change the AdminQ mode method gve_adminq_describe_device()
> and its children to fill up device information into this newly
> introduced struct gve_device_info. Move a few helper functions
> and code that set device properties in the priv structure into
> gve_init_priv(). So now gve_init_priv() calls/does the following:
> 
> - gve_set_mtu()
> - gve_set_mac()
> - gve_set_queue_properties()
> - gve_set_buf_sizes()
> - set flow steering and RSS properties
> - set other priv properties
> 
> When MailboxQ support is added, device information will be filled
> into the same structure and the same gve_init_priv() path would be
> used to set device properties to ensure common code reusage.
> 
> These changes are refactors only, no functional change.
> 
> Reviewed-by: Willem de Bruijn <willemb@google.com>
> Reviewed-by: Jordan Rhee <jordanrhee@google.com>
> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
> ---
> Changes in v3:
> - Read default_min_ring_size from device info instead of priv
> 
>   drivers/net/ethernet/google/gve/gve.h        |  29 +++++
>   drivers/net/ethernet/google/gve/gve_adminq.c | 115 +++++++++++--------
>   drivers/net/ethernet/google/gve/gve_adminq.h |   6 -
>   drivers/net/ethernet/google/gve/gve_main.c   | 101 +++++++++++-----
>   4 files changed, 170 insertions(+), 81 deletions(-)
> 
> diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
> index c280ff35ee77..021adb9108df 100644
> --- a/drivers/net/ethernet/google/gve/gve.h
> +++ b/drivers/net/ethernet/google/gve/gve.h
> @@ -797,6 +797,34 @@ struct gve_ptp {
>   	struct gve_priv *priv;
>   };
>   
> +struct gve_device_info {
> +	enum gve_queue_format queue_format;
> +	u16 default_tx_queues;
> +	u16 default_rx_queues;
> +	u16 max_tx_queues;
> +	u16 max_rx_queues;
> +	u16 default_tx_ring_size;
> +	u16 default_rx_ring_size;
> +	u16 max_tx_ring_size;
> +	u16 max_rx_ring_size;
> +	u16 min_tx_ring_size;
> +	u16 min_rx_ring_size;
> +	u16 max_mtu;
> +	u8 mac[ETH_ALEN];
> +	u16 max_rx_buffer_size;
> +	u16 header_buf_size;
> +	u32 max_flow_rules;
> +	u16 rss_key_size;
> +	u16 rss_lut_size;
> +	u16 tx_pages_per_qpl;
> +	u16 num_event_counters;
> +	u64 max_registered_pages;
> +	bool default_min_ring_size;
> +	bool nic_timestamp_supported;
> +	bool modify_ring_size_enabled;
> +	bool cache_rss_config;
> +};

you could save some bytes of the struct size by reordering fields

> +
>   struct gve_priv {
>   	struct net_device *dev;
>   	struct gve_tx_ring *tx; /* array of tx_cfg.num_queues */
> @@ -929,6 +957,7 @@ struct gve_priv {
>   	struct gve_nic_ts_report *nic_ts_report;
>   	dma_addr_t nic_ts_report_bus;
>   	u64 last_sync_nic_counter; /* Clock counter from last NIC TS report */
> +	struct gve_device_info device_info;
>   };


[..]

> -int gve_set_mtu(struct gve_priv *priv,
> -		struct gve_device_descriptor *descriptor)
> +static int gve_set_mtu(struct gve_priv *priv)
>   {
> +	struct gve_device_info *device_info = &priv->device_info;
>   	u16 mtu;
>   
> -	mtu = be16_to_cpu(descriptor->mtu);
> +	mtu = device_info->max_mtu;
>   	if (mtu < ETH_MIN_MTU) {
>   		dev_err(&priv->pdev->dev, "MTU %d below minimum MTU\n", mtu);
>   		return -EINVAL;
>   	}
>   	priv->dev->max_mtu = mtu;
> +	priv->dev->mtu = priv->dev->max_mtu;

nit: I would just use `= mtu`

>   
>   	return 0;
>   }
>   
> -void gve_set_mac(struct gve_priv *priv,
> -		 struct gve_device_descriptor *descriptor)
> +static void gve_set_mac(struct gve_priv *priv)
>   {
> -	eth_hw_addr_set(priv->dev, descriptor->mac);
> -	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", descriptor->mac);
> +	struct gve_device_info *device_info = &priv->device_info;
> +
> +	eth_hw_addr_set(priv->dev, device_info->mac);
> +	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", device_info->mac);
> +}

whole function is rewritten (in git sense), and it was just added in
previous commit

one way to avoid that is to extract "mac" variable in the prev patch,
and here only update the assignement and function signature

> +
> +static void gve_set_buf_sizes(struct gve_priv *priv)
> +{
> +	struct gve_device_info *device_info = &priv->device_info;
> +
> +	if (device_info->max_rx_buffer_size > priv->max_rx_buffer_size)
> +		priv->max_rx_buffer_size = device_info->max_rx_buffer_size;
> +
> +	if (gve_is_dqo(priv) &&
> +	    priv->max_rx_buffer_size > GVE_DEFAULT_RX_BUFFER_SIZE)
> +		priv->rx_cfg.packet_buffer_size = priv->max_rx_buffer_size;
> +
> +	if (device_info->header_buf_size)
> +		priv->header_buf_size = device_info->header_buf_size;
>   }
>   
>   static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
>   {
> +	struct gve_device_info *device_info = &priv->device_info;
>   	int err;
>   
>   	/* Set up the adminq */
> @@ -2514,7 +2533,7 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
>   	if (skip_describe_device)
>   		goto setup_device;
>   
> -	priv->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
> +	device_info->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
>   	/* Get the initial information we need from the device */
>   	err = gve_adminq_describe_device(priv);
>   	if (err) {
> @@ -2523,6 +2542,8 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
>   		goto err;
>   	}
>   
> +	priv->queue_format = priv->device_info.queue_format;
> +
>   	err = gve_set_num_ntfy_blks(priv);
>   	if (err) {
>   		dev_err(&priv->pdev->dev,
> @@ -2546,12 +2567,34 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
>   		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
>   	}
>   
> -	priv->dev->mtu = priv->dev->max_mtu;
> +	if (gve_set_mtu(priv)) {
> +		err = -EINVAL;
> +		goto err;
> +	}
> +
> +	priv->num_event_counters = device_info->num_event_counters;
> +
> +	gve_set_mac(priv);
> +
> +	gve_set_queue_properties(priv);
> +	priv->modify_ring_size_enabled = device_info->modify_ring_size_enabled;
> +
> +	gve_set_buf_sizes(priv);
> +
> +	priv->max_flow_rules = device_info->max_flow_rules;
> +	if (priv->max_flow_rules)
> +		priv->dev->hw_features |= NETIF_F_NTUPLE;
> +
> +	priv->rss_key_size = device_info->rss_key_size;
> +	priv->rss_lut_size = device_info->rss_lut_size;
> +	priv->cache_rss_config = device_info->cache_rss_config;

I don't know, especially with your MailboxQ coming next, if following
makes sense, but I wonder why you have to copy whole device info into
priv (or IOW, hold two copies of most params)?

Alternative will be to use variables from device info everywhere,
you could even achieve that without any code changes via struct_group

> +
>   	priv->numa_node = dev_to_node(&priv->pdev->dev);
>   	priv->tx_cfg.num_xdp_queues = 0;
>   	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
>   	priv->ts_config.tx_type = HWTSTAMP_TX_OFF;
>   	priv->ts_config.rx_filter = HWTSTAMP_FILTER_NONE;
> +	priv->nic_timestamp_supported = device_info->nic_timestamp_supported;
>   
>   setup_device:
>   	priv->xsk_pools = bitmap_zalloc(priv->rx_cfg.max_queues, GFP_KERNEL);

Re: [PATCH net-next v3 06/15] gve: introduce ctrl ops to set vectors and Qs

[Przemek Kitszel]

On 8/3/26 20:46, Harshitha Ramamurthy wrote:
> Introduce following ctrl ops for Adminq mode. This change does
> not introduce any functional change, just movement of code into
> ops.
> 
> - set_num_queues to set maximum and default TX/RX queues in the
>    alloc structures used in the initialization flow.
> - set_num_ntfy_blks op to set number of vectors(ntfy_blks) in the
>    initialization flow.
> 
> Reviewed-by: Willem de Bruijn <willemb@google.com>
> Reviewed-by: Jordan Rhee <jordanrhee@google.com>
> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
> ---
>   drivers/net/ethernet/google/gve/gve.h        |  6 ++
>   drivers/net/ethernet/google/gve/gve_adminq.c | 45 ++++++++++++++
>   drivers/net/ethernet/google/gve/gve_adminq.h |  2 +
>   drivers/net/ethernet/google/gve/gve_main.c   | 64 +++-----------------
>   4 files changed, 63 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
> index 56148ea3cfbf..1bc5e32b6618 100644
> --- a/drivers/net/ethernet/google/gve/gve.h
> +++ b/drivers/net/ethernet/google/gve/gve.h
> @@ -829,10 +829,16 @@ struct gve_device_info {
>    * struct gve_ctrl_ops - Control plane operations structure
>    * @map_db_bar: Maps the doorbell BAR for the device and store in @priv.
>    * @unmap_db_bar: Unmaps the doorbell BAR previously mapped by @map_db_bar.
> + * @set_num_queues: Sets default and max TX/RX queues into allocation
> + *                  structures stored in @priv to be used during initialization.
> + * @set_num_ntfy_blks: Sets no. of vectors into @priv to be used during
> + *                     initialization.
>    */
>   struct gve_ctrl_ops {
>   	int (*map_db_bar)(struct gve_priv *priv);
>   	void (*unmap_db_bar)(struct gve_priv *priv);
> +	void (*set_num_queues)(struct gve_priv *priv);
> +	int (*set_num_ntfy_blks)(struct gve_priv *priv);
>   };
>   
>   struct gve_priv {
> diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
> index 9c3ebdb547cf..1d9ae601cdeb 100644
> --- a/drivers/net/ethernet/google/gve/gve_adminq.c
> +++ b/drivers/net/ethernet/google/gve/gve_adminq.c
> @@ -1612,3 +1612,48 @@ void gve_adminq_unmap_db_bar(struct gve_priv *priv)
>   
>   	pci_iounmap(pdev, priv->db_bar2);
>   }
> +
> +int gve_adminq_set_num_ntfy_blks(struct gve_priv *priv)

Would be best to change patch 2 to introduce this in the gve_adminq.c,
to avoid trashing. Same for the other callbacks.


[..]

>   
>   static const struct gve_ctrl_ops gve_adminq_ops = {
> -	.map_db_bar	 = gve_adminq_map_db_bar,
> -	.unmap_db_bar	 = gve_adminq_unmap_db_bar,
> +	.map_db_bar		= gve_adminq_map_db_bar,
> +	.unmap_db_bar		= gve_adminq_unmap_db_bar,

pleaase instead use final spacing in the previous patch

> +	.set_num_queues		= gve_adminq_set_num_queues,
> +	.set_num_ntfy_blks	= gve_adminq_set_num_ntfy_blks,
>   };