Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Angelo Compagnucci <angelo@amarulasolutions.com>
To: buildroot@buildroot.org
Cc: Angelo Compagnucci <angelo@amarulasolutions.com>
Subject: [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package
Date: Fri, 14 Oct 2022 08:58:58 +0200	[thread overview]
Message-ID: <20221014065900.3311604-4-angelo@amarulasolutions.com> (raw)
In-Reply-To: <20221014065900.3311604-1-angelo@amarulasolutions.com>

This package enables the Bluetooth device embedded in the RTL8723DS
chip.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
---
 linux/linux.mk                         |  3 ++-
 package/Config.in                      |  1 +
 package/rtl8723ds-bt/Config.in         |  6 ++++++
 package/rtl8723ds-bt/rtl8723ds-bt.hash |  2 ++
 package/rtl8723ds-bt/rtl8723ds-bt.mk   | 28 ++++++++++++++++++++++++++
 5 files changed, 39 insertions(+), 1 deletion(-)
 create mode 100644 package/rtl8723ds-bt/Config.in
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk

diff --git a/linux/linux.mk b/linux/linux.mk
index 9a909c7d7b..8ae5a97a80 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -78,7 +78,8 @@ LINUX_DEPENDENCIES += \
 	$(if $(BR2_PACKAGE_INTEL_MICROCODE),intel-microcode) \
 	$(if $(BR2_PACKAGE_LINUX_FIRMWARE),linux-firmware) \
 	$(if $(BR2_PACKAGE_FIRMWARE_IMX),firmware-imx) \
-	$(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb)
+	$(if $(BR2_PACKAGE_WIRELESS_REGDB),wireless-regdb) \
+	$(if $(BR2_PACKAGE_RTL8723DS_BT),rtl8723ds-bt)
 
 # Starting with 4.16, the generated kconfig paser code is no longer
 # shipped with the kernel sources, so we need flex and bison, but
diff --git a/package/Config.in b/package/Config.in
index e3a34d6e97..4f6e508106 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -578,6 +578,7 @@ endmenu
 	source "package/rtl8189fs/Config.in"
 	source "package/rtl8723bu/Config.in"
 	source "package/rtl8723ds/Config.in"
+	source "package/rtl8723ds-bt/Config.in"
 	source "package/rtl8812au-aircrack-ng/Config.in"
 	source "package/rtl8821au/Config.in"
 	source "package/sane-backends/Config.in"
diff --git a/package/rtl8723ds-bt/Config.in b/package/rtl8723ds-bt/Config.in
new file mode 100644
index 0000000000..ab4ba0bf11
--- /dev/null
+++ b/package/rtl8723ds-bt/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_RTL8723DS_BT
+	bool "rtl8723ds-bt"
+	help
+	  rtl8723ds UART attached Bluetooth driver
+
+	  https://github.com/wsyco/RTL8723DS_BT_Linux
diff --git a/package/rtl8723ds-bt/rtl8723ds-bt.hash b/package/rtl8723ds-bt/rtl8723ds-bt.hash
new file mode 100644
index 0000000000..1ec4e350f9
--- /dev/null
+++ b/package/rtl8723ds-bt/rtl8723ds-bt.hash
@@ -0,0 +1,2 @@
+# Locally computed
+sha256  9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4  rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz
diff --git a/package/rtl8723ds-bt/rtl8723ds-bt.mk b/package/rtl8723ds-bt/rtl8723ds-bt.mk
new file mode 100644
index 0000000000..be1b9a9cc2
--- /dev/null
+++ b/package/rtl8723ds-bt/rtl8723ds-bt.mk
@@ -0,0 +1,28 @@
+################################################################################
+#
+# rtl8723ds-bt
+#
+################################################################################
+
+RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08
+RTL8723DS_BT_SITE = $(call github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION))
+RTL8723DS_BT_LICENSE = PROPRIETARY
+RTL8723DS_BT_INSTALL_STAGING = YES
+
+define RTL8723DS_BT_LINUX_CONFIG_FIXUPS
+	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_BUS)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_DEV_CTRL_TTYPORT)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_BT)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_3WIRE)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_BT_HCIUART_RTL)
+	$(call KCONFIG_APPEND_OPT,CONFIG_EXTRA_FIRMWARE,rtl_bt/rtl8723ds_fw.bin rtl_bt/rtl8723ds_config.bin)
+endef
+
+define RTL8723DS_BT_INSTALL_STAGING_CMDS
+	mkdir -p $(STAGING_DIR)/lib/firmware/rtl_bt/
+	cp $(@D)/8723D/rtl8723d_fw $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin
+	cp $(@D)/8723D/rtl8723d_config $(STAGING_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin
+endef
+
+$(eval $(generic-package))
-- 
2.25.1

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  parent reply	other threads:[~2022-10-14  6:59 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-14  6:58 [Buildroot] [PATCH v2 0/5] Lichee RV and Lichee RV dock support Angelo Compagnucci
2022-10-14  6:58 ` [Buildroot] [PATCH v2 1/5] linux: enable CONFIG_EXTRA_FIRMWARE_DIR Angelo Compagnucci
2022-10-30 20:43   ` Thomas Petazzoni via buildroot
2022-10-30 20:52     ` Angelo Compagnucci
2022-10-30 21:23   ` Yann E. MORIN
2022-10-14  6:58 ` [Buildroot] [PATCH v2 2/5] package/pkg-utils: add KCONFIG_APPEND_OPT Angelo Compagnucci
2022-10-14  6:58 ` Angelo Compagnucci [this message]
2022-10-30 20:48   ` [Buildroot] [PATCH v2 3/5] ackage/rtl8723ds-bt: new package Thomas Petazzoni via buildroot
2022-10-30 20:55     ` Angelo Compagnucci
2022-10-30 21:21       ` Yann E. MORIN
2022-10-14  6:58 ` [Buildroot] [PATCH v2 4/5] configs/lichee_rv: new defconfig Angelo Compagnucci
2022-10-14  6:59 ` [Buildroot] [PATCH v2 5/5] configs/lichee_rv_dock: " Angelo Compagnucci

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221014065900.3311604-4-angelo@amarulasolutions.com \
    --to=angelo@amarulasolutions.com \
    --cc=buildroot@buildroot.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox