From: Martin Wilck <mwilck@suse.com>
To: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: dm-devel@redhat.com, Martin Wilck <mwilck@suse.com>
Subject: [PATCH 00/21] libmultipath: checkers overhaul
Date: Fri, 12 Oct 2018 00:26:46 +0200 [thread overview]
Message-ID: <20181011222707.3631-1-mwilck@suse.com> (raw)
Hi Christophe,
This series starts with a few minor fixes and then attempts
an overhaul of the checker code.
First, there's a block of patches to get rid of the "message"
char array in struct checker, replacing it with an integer.
This topic had been touched in recent discussion between Ben
and myself.
The next larger block fixes problems with checkers that try
to check unsupported devices. It's an interesting experience
to configure wrong checkers for the existing devices and see
what happens. With these patches, paths won't be falsely
teared down any more in such situations.
The last patch cleans up the checker data structure by splitting
it into a "checker class" and the path "checker instance".
There's more work to do in this area, but this is a start.
Regards,
Martin
Martin Wilck (21):
libmultipath: fix use of uninitialized memory in write()
libmultipath: fix memory leaks from scandir() use
libmultipath/checkers: replace message by msgid
libmultipath/checkers: cciss_tur: use message id
libmultipath/checkers: directio: use message id
libmultipath/checkers: emc_clariion: use message id
libmultipath/checkers: hp_sw: use message id
libmultipath/checkers: rdac: use message id
libmultipath/checkers: readsector0: use message id
libmultipath/checkers: tur: use message id
multipathd: improve checker message logging
libmultipath/checkers: support unsupported paths
libmultipath: clariion checker: leave unsupported paths alone
libmultipath: hp_sw checker: leave unsupported paths alone
libmultipath: rdac checker: leave unsupported paths alone
libmultipath: tur checker: leave unsupported paths alone
libmultipath: pathinfo: don't blank wwid if checker fails
multipathd: check_path: improve logging for "unusable path" case
libmultipath: coalesce_paths: improve logging of orphaned paths
libmultipath: sync_map_state: log failing paths
libmultipath/checkers: cleanup class/instance model
libmultipath/checkers.c | 196 +++++++++++++++++----------
libmultipath/checkers.h | 65 ++++++---
libmultipath/checkers/cciss_tur.c | 13 +-
libmultipath/checkers/directio.c | 29 ++--
libmultipath/checkers/emc_clariion.c | 108 ++++++++++++---
libmultipath/checkers/hp_sw.c | 39 ++++--
libmultipath/checkers/rdac.c | 92 +++++++++----
libmultipath/checkers/readsector0.c | 7 +-
libmultipath/checkers/tur.c | 60 ++++----
libmultipath/config.c | 10 +-
libmultipath/configure.c | 10 +-
libmultipath/discovery.c | 7 +-
libmultipath/foreign.c | 5 +-
libmultipath/foreign/nvme.c | 6 +-
libmultipath/print.c | 2 +-
libmultipath/propsel.c | 19 +--
libmultipath/structs_vec.c | 5 +-
libmultipath/sysfs.c | 5 +-
libmultipath/util.c | 9 ++
libmultipath/util.h | 9 ++
multipathd/main.c | 37 +++--
21 files changed, 493 insertions(+), 240 deletions(-)
--
2.19.0
next reply other threads:[~2018-10-11 22:26 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 22:26 Martin Wilck [this message]
2018-10-11 22:26 ` [PATCH 01/21] libmultipath: fix use of uninitialized memory in write() Martin Wilck
2018-10-25 20:31 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 02/21] libmultipath: fix memory leaks from scandir() use Martin Wilck
2018-10-25 20:31 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 03/21] libmultipath/checkers: replace message by msgid Martin Wilck
2018-10-25 20:57 ` Benjamin Marzinski
2018-10-25 21:36 ` Martin Wilck
2018-10-11 22:26 ` [PATCH 04/21] libmultipath/checkers: cciss_tur: use message id Martin Wilck
2018-10-25 20:57 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 05/21] libmultipath/checkers: directio: " Martin Wilck
2018-10-25 20:58 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 06/21] libmultipath/checkers: emc_clariion: " Martin Wilck
2018-10-25 20:58 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 07/21] libmultipath/checkers: hp_sw: " Martin Wilck
2018-10-25 20:58 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 08/21] libmultipath/checkers: rdac: " Martin Wilck
2018-10-25 20:59 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 09/21] libmultipath/checkers: readsector0: " Martin Wilck
2018-10-25 21:02 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 10/21] libmultipath/checkers: tur: " Martin Wilck
2018-10-25 21:32 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 11/21] multipathd: improve checker message logging Martin Wilck
2018-10-25 21:32 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 12/21] libmultipath/checkers: support unsupported paths Martin Wilck
2018-10-25 21:33 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 13/21] libmultipath: clariion checker: leave unsupported paths alone Martin Wilck
2018-10-25 21:41 ` Benjamin Marzinski
2018-10-26 9:01 ` Martin Wilck
2018-10-11 22:27 ` [PATCH 14/21] libmultipath: hp_sw " Martin Wilck
2018-10-25 21:42 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 15/21] libmultipath: rdac " Martin Wilck
2018-10-25 21:42 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 16/21] libmultipath: tur " Martin Wilck
2018-10-25 21:42 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 17/21] libmultipath: pathinfo: don't blank wwid if checker fails Martin Wilck
2018-10-25 21:50 ` Benjamin Marzinski
2018-10-26 9:16 ` Martin Wilck
2018-10-26 15:11 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 18/21] multipathd: check_path: improve logging for "unusable path" case Martin Wilck
2018-10-25 21:50 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 19/21] libmultipath: coalesce_paths: improve logging of orphaned paths Martin Wilck
2018-10-25 21:50 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 20/21] libmultipath: sync_map_state: log failing paths Martin Wilck
2018-10-25 21:52 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 21/21] libmultipath/checkers: cleanup class/instance model Martin Wilck
2018-10-25 21:52 ` Benjamin Marzinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011222707.3631-1-mwilck@suse.com \
--to=mwilck@suse.com \
--cc=christophe.varoqui@opensvc.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox