From: Martin Wilck <mwilck@suse.com>
To: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: dm-devel@redhat.com, Martin Wilck <mwilck@suse.com>
Subject: [PATCH 13/21] libmultipath: clariion checker: leave unsupported paths alone
Date: Fri, 12 Oct 2018 00:26:59 +0200 [thread overview]
Message-ID: <20181011222707.3631-14-mwilck@suse.com> (raw)
In-Reply-To: <20181011222707.3631-1-mwilck@suse.com>
A checker shouldn't set the path state to PATH_DOWN if it fails
to obtain information about the path in the first place. Add logic
to the checker to distinguish a failed path from an unsupported path.
Signed-off-by: Martin Wilck <mwilck@suse.com>
---
libmultipath/checkers/emc_clariion.c | 50 ++++++++++++++++++++++++++--
1 file changed, 48 insertions(+), 2 deletions(-)
diff --git a/libmultipath/checkers/emc_clariion.c b/libmultipath/checkers/emc_clariion.c
index f8e55b93..a277a004 100644
--- a/libmultipath/checkers/emc_clariion.c
+++ b/libmultipath/checkers/emc_clariion.c
@@ -20,6 +20,11 @@
#define INQUIRY_CMD 0x12
#define INQUIRY_CMDLEN 6
#define HEAVY_CHECK_COUNT 10
+#define SCSI_COMMAND_TERMINATED 0x22
+#define SCSI_CHECK_CONDITION 0x2
+#define RECOVERED_ERROR 0x01
+#define ILLEGAL_REQUEST 0x05
+#define SG_ERR_DRIVER_SENSE 0x08
/*
* Mechanism to track CLARiiON inactive snapshot LUs.
@@ -130,7 +135,9 @@ int libcheck_check (struct checker * c)
(struct emc_clariion_checker_path_context *)c->context;
char wwnstr[33];
int ret;
+ int retry_emc = 5;
+retry:
memset(&io_hdr, 0, sizeof (struct sg_io_hdr));
memset(sense_buffer, 0, 128);
memset(sb, 0, SENSE_BUFF_LEN);
@@ -145,12 +152,51 @@ int libcheck_check (struct checker * c)
io_hdr.timeout = c->timeout * 1000;
io_hdr.pack_id = 0;
if (ioctl(c->fd, SG_IO, &io_hdr) < 0) {
+ if (errno == ENOTTY) {
+ c->msgid = CHECKER_MSGID_UNSUPPORTED;
+ return PATH_WILD;
+ }
c->msgid = MSG_CLARIION_QUERY_FAILED;
return PATH_DOWN;
}
+
if (io_hdr.info & SG_INFO_OK_MASK) {
- c->msgid = MSG_CLARIION_QUERY_ERROR;
- return PATH_DOWN;
+ switch (io_hdr.host_status) {
+ case DID_BUS_BUSY:
+ case DID_ERROR:
+ case DID_SOFT_ERROR:
+ case DID_TRANSPORT_DISRUPTED:
+ /* Transport error, retry */
+ if (--retry_emc)
+ goto retry;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (SCSI_CHECK_CONDITION == io_hdr.status ||
+ SCSI_COMMAND_TERMINATED == io_hdr.status ||
+ SG_ERR_DRIVER_SENSE == (0xf & io_hdr.driver_status)) {
+ if (io_hdr.sbp && (io_hdr.sb_len_wr > 2)) {
+ unsigned char *sbp = io_hdr.sbp;
+ int sense_key;
+
+ if (sbp[0] & 0x2)
+ sense_key = sbp[1] & 0xf;
+ else
+ sense_key = sbp[2] & 0xf;
+
+ if (sense_key == ILLEGAL_REQUEST) {
+ c->msgid = CHECKER_MSGID_UNSUPPORTED;
+ return PATH_WILD;
+ } else if (sense_key != RECOVERED_ERROR) {
+ condlog(1, "emc_clariion_checker: INQUIRY failed with sense key %02x",
+ sense_key);
+ c->msgid = MSG_CLARIION_QUERY_ERROR;
+ return PATH_DOWN;
+ }
+ }
}
if (/* Verify the code page - right page & revision */
sense_buffer[1] != 0xc0 || sense_buffer[9] != 0x00) {
--
2.19.0
next prev parent reply other threads:[~2018-10-11 22:26 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 22:26 [PATCH 00/21] libmultipath: checkers overhaul Martin Wilck
2018-10-11 22:26 ` [PATCH 01/21] libmultipath: fix use of uninitialized memory in write() Martin Wilck
2018-10-25 20:31 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 02/21] libmultipath: fix memory leaks from scandir() use Martin Wilck
2018-10-25 20:31 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 03/21] libmultipath/checkers: replace message by msgid Martin Wilck
2018-10-25 20:57 ` Benjamin Marzinski
2018-10-25 21:36 ` Martin Wilck
2018-10-11 22:26 ` [PATCH 04/21] libmultipath/checkers: cciss_tur: use message id Martin Wilck
2018-10-25 20:57 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 05/21] libmultipath/checkers: directio: " Martin Wilck
2018-10-25 20:58 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 06/21] libmultipath/checkers: emc_clariion: " Martin Wilck
2018-10-25 20:58 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 07/21] libmultipath/checkers: hp_sw: " Martin Wilck
2018-10-25 20:58 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 08/21] libmultipath/checkers: rdac: " Martin Wilck
2018-10-25 20:59 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 09/21] libmultipath/checkers: readsector0: " Martin Wilck
2018-10-25 21:02 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 10/21] libmultipath/checkers: tur: " Martin Wilck
2018-10-25 21:32 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 11/21] multipathd: improve checker message logging Martin Wilck
2018-10-25 21:32 ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 12/21] libmultipath/checkers: support unsupported paths Martin Wilck
2018-10-25 21:33 ` Benjamin Marzinski
2018-10-11 22:26 ` Martin Wilck [this message]
2018-10-25 21:41 ` [PATCH 13/21] libmultipath: clariion checker: leave unsupported paths alone Benjamin Marzinski
2018-10-26 9:01 ` Martin Wilck
2018-10-11 22:27 ` [PATCH 14/21] libmultipath: hp_sw " Martin Wilck
2018-10-25 21:42 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 15/21] libmultipath: rdac " Martin Wilck
2018-10-25 21:42 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 16/21] libmultipath: tur " Martin Wilck
2018-10-25 21:42 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 17/21] libmultipath: pathinfo: don't blank wwid if checker fails Martin Wilck
2018-10-25 21:50 ` Benjamin Marzinski
2018-10-26 9:16 ` Martin Wilck
2018-10-26 15:11 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 18/21] multipathd: check_path: improve logging for "unusable path" case Martin Wilck
2018-10-25 21:50 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 19/21] libmultipath: coalesce_paths: improve logging of orphaned paths Martin Wilck
2018-10-25 21:50 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 20/21] libmultipath: sync_map_state: log failing paths Martin Wilck
2018-10-25 21:52 ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 21/21] libmultipath/checkers: cleanup class/instance model Martin Wilck
2018-10-25 21:52 ` Benjamin Marzinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011222707.3631-14-mwilck@suse.com \
--to=mwilck@suse.com \
--cc=christophe.varoqui@opensvc.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox