Linux Device Mapper development
 help / color / mirror / Atom feed
From: "Benjamin Marzinski" <bmarzins@redhat.com>
To: Martin Wilck <mwilck@suse.com>
Cc: dm-devel@redhat.com
Subject: Re: [PATCH 08/21] libmultipath/checkers: rdac: use message id
Date: Thu, 25 Oct 2018 15:59:30 -0500	[thread overview]
Message-ID: <20181025205930.GQ7100@octiron.msp.redhat.com> (raw)
In-Reply-To: <20181011222707.3631-9-mwilck@suse.com>

On Fri, Oct 12, 2018 at 12:26:54AM +0200, Martin Wilck wrote:

Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>

> Signed-off-by: Martin Wilck <mwilck@suse.com>
> ---
>  libmultipath/checkers/rdac.c | 64 +++++++++++++++++++++++++-----------
>  1 file changed, 45 insertions(+), 19 deletions(-)
> 
> diff --git a/libmultipath/checkers/rdac.c b/libmultipath/checkers/rdac.c
> index 5104e4e5..266f8e10 100644
> --- a/libmultipath/checkers/rdac.c
> +++ b/libmultipath/checkers/rdac.c
> @@ -31,9 +31,7 @@
>  #define CURRENT_PAGE_CODE_VALUES	0
>  #define CHANGEABLE_PAGE_CODE_VALUES	1
>  
> -#define MSG_RDAC_UP    "rdac checker reports path is up"
> -#define MSG_RDAC_DOWN  "rdac checker reports path is down"
> -#define MSG_RDAC_GHOST "rdac checker reports path is ghost"
> +#define MSG_RDAC_DOWN  " reports path is down"
>  #define MSG_RDAC_DOWN_TYPE(STR) MSG_RDAC_DOWN": "STR
>  
>  #define RTPG_UNAVAILABLE	0x3
> @@ -219,41 +217,69 @@ struct volume_access_inq
>  	char dontcare1[34];
>  };
>  
> -const char
> -*checker_msg_string(struct volume_access_inq *inq)
> +enum {
> +	RDAC_MSGID_NOT_CONN = CHECKER_FIRST_MSGID,
> +	RDAC_MSGID_IN_STARTUP,
> +	RDAC_MSGID_NON_RESPONSIVE,
> +	RDAC_MSGID_IN_RESET,
> +	RDAC_MSGID_FW_DOWNLOADING,
> +	RDAC_MSGID_QUIESCED,
> +	RDAC_MSGID_SERVICE_MODE,
> +	RDAC_MSGID_UNAVAILABLE,
> +	RDAC_MSGID_INQUIRY_FAILED,
> +};
> +
> +#define _IDX(x) (RDAC_MSGID_##x - CHECKER_FIRST_MSGID)
> +const char *libcheck_msgtable[] = {
> +	[_IDX(NOT_CONN)] = MSG_RDAC_DOWN_TYPE("lun not connected"),
> +	[_IDX(IN_STARTUP)] = MSG_RDAC_DOWN_TYPE("ctlr is in startup sequence"),
> +	[_IDX(NON_RESPONSIVE)] =
> +	MSG_RDAC_DOWN_TYPE("non-responsive to queries"),
> +	[_IDX(IN_RESET)] = MSG_RDAC_DOWN_TYPE("ctlr held in reset"),
> +	[_IDX(FW_DOWNLOADING)] =
> +	MSG_RDAC_DOWN_TYPE("ctlr firmware downloading"),
> +	[_IDX(QUIESCED)] = MSG_RDAC_DOWN_TYPE("ctlr quiesced by admin request"),
> +	[_IDX(SERVICE_MODE)] = MSG_RDAC_DOWN_TYPE("ctlr is in service mode"),
> +	[_IDX(UNAVAILABLE)] = MSG_RDAC_DOWN_TYPE("ctlr is unavailable"),
> +	[_IDX(INQUIRY_FAILED)] = MSG_RDAC_DOWN_TYPE("inquiry failed"),
> +	NULL,
> +};
> +
> +static int
> +checker_msg_string(const struct volume_access_inq *inq)
>  {
>  	/* lun not connected */
>  	if (((inq->PQ_PDT & 0xE0) == 0x20) || (inq->PQ_PDT & 0x7f))
> -		return MSG_RDAC_DOWN_TYPE("lun not connected");
> +		return RDAC_MSGID_NOT_CONN;
>  
>  	/* if no tpg data is available, give the generic path down message */
>  	if (!(inq->avtcvp & 0x10))
> -		return MSG_RDAC_DOWN;
> +		return CHECKER_MSGID_DOWN;
>  
>  	/* controller is booting up */
>  	if (((inq->aas_cur & 0x0F) == RTPG_TRANSITIONING) &&
>  		(inq->aas_alt & 0x0F) != RTPG_TRANSITIONING)
> -		return MSG_RDAC_DOWN_TYPE("ctlr is in startup sequence");
> +		return RDAC_MSGID_IN_STARTUP;
>  
>  	/* if not unavailable, give generic message */
>  	if ((inq->aas_cur & 0x0F) != RTPG_UNAVAILABLE)
> -		return MSG_RDAC_DOWN;
> +		return CHECKER_MSGID_DOWN;
>  
>  	/* target port group unavailable */
>  	switch (inq->vendor_specific_cur) {
>  	case RTPG_UNAVAIL_NON_RESPONSIVE:
> -		return MSG_RDAC_DOWN_TYPE("non-responsive to queries");
> +		return RDAC_MSGID_NON_RESPONSIVE;
>  	case RTPG_UNAVAIL_IN_RESET:
> -		return MSG_RDAC_DOWN_TYPE("ctlr held in reset");
> +		return RDAC_MSGID_IN_RESET;
>  	case RTPG_UNAVAIL_CFW_DL1:
>  	case RTPG_UNAVAIL_CFW_DL2:
> -		return MSG_RDAC_DOWN_TYPE("ctlr firmware downloading");
> +		return RDAC_MSGID_FW_DOWNLOADING;
>  	case RTPG_UNAVAIL_QUIESCED:
> -		return MSG_RDAC_DOWN_TYPE("ctlr quiesced by admin request");
> +		return RDAC_MSGID_QUIESCED;
>  	case RTPG_UNAVAIL_SERVICE_MODE:
> -		return MSG_RDAC_DOWN_TYPE("ctlr is in service mode");
> +		return RDAC_MSGID_SERVICE_MODE;
>  	default:
> -		return MSG_RDAC_DOWN_TYPE("ctlr is unavailable");
> +		return RDAC_MSGID_UNAVAILABLE;
>  	}
>  }
>  
> @@ -307,14 +333,14 @@ int libcheck_check(struct checker * c)
>  done:
>  	switch (ret) {
>  	case PATH_DOWN:
> -		MSG(c, "%s", (inqfail) ? MSG_RDAC_DOWN_TYPE("inquiry failed") :
> -			checker_msg_string(&inq));
> +		c->msgid = (inqfail ? RDAC_MSGID_INQUIRY_FAILED :
> +			    checker_msg_string(&inq));
>  		break;
>  	case PATH_UP:
> -		MSG(c, MSG_RDAC_UP);
> +		c->msgid = CHECKER_MSGID_UP;
>  		break;
>  	case PATH_GHOST:
> -		MSG(c, MSG_RDAC_GHOST);
> +		c->msgid = CHECKER_MSGID_GHOST;
>  		break;
>  	}
>  
> -- 
> 2.19.0

  reply	other threads:[~2018-10-25 20:59 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-11 22:26 [PATCH 00/21] libmultipath: checkers overhaul Martin Wilck
2018-10-11 22:26 ` [PATCH 01/21] libmultipath: fix use of uninitialized memory in write() Martin Wilck
2018-10-25 20:31   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 02/21] libmultipath: fix memory leaks from scandir() use Martin Wilck
2018-10-25 20:31   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 03/21] libmultipath/checkers: replace message by msgid Martin Wilck
2018-10-25 20:57   ` Benjamin Marzinski
2018-10-25 21:36     ` Martin Wilck
2018-10-11 22:26 ` [PATCH 04/21] libmultipath/checkers: cciss_tur: use message id Martin Wilck
2018-10-25 20:57   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 05/21] libmultipath/checkers: directio: " Martin Wilck
2018-10-25 20:58   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 06/21] libmultipath/checkers: emc_clariion: " Martin Wilck
2018-10-25 20:58   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 07/21] libmultipath/checkers: hp_sw: " Martin Wilck
2018-10-25 20:58   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 08/21] libmultipath/checkers: rdac: " Martin Wilck
2018-10-25 20:59   ` Benjamin Marzinski [this message]
2018-10-11 22:26 ` [PATCH 09/21] libmultipath/checkers: readsector0: " Martin Wilck
2018-10-25 21:02   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 10/21] libmultipath/checkers: tur: " Martin Wilck
2018-10-25 21:32   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 11/21] multipathd: improve checker message logging Martin Wilck
2018-10-25 21:32   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 12/21] libmultipath/checkers: support unsupported paths Martin Wilck
2018-10-25 21:33   ` Benjamin Marzinski
2018-10-11 22:26 ` [PATCH 13/21] libmultipath: clariion checker: leave unsupported paths alone Martin Wilck
2018-10-25 21:41   ` Benjamin Marzinski
2018-10-26  9:01     ` Martin Wilck
2018-10-11 22:27 ` [PATCH 14/21] libmultipath: hp_sw " Martin Wilck
2018-10-25 21:42   ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 15/21] libmultipath: rdac " Martin Wilck
2018-10-25 21:42   ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 16/21] libmultipath: tur " Martin Wilck
2018-10-25 21:42   ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 17/21] libmultipath: pathinfo: don't blank wwid if checker fails Martin Wilck
2018-10-25 21:50   ` Benjamin Marzinski
2018-10-26  9:16     ` Martin Wilck
2018-10-26 15:11       ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 18/21] multipathd: check_path: improve logging for "unusable path" case Martin Wilck
2018-10-25 21:50   ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 19/21] libmultipath: coalesce_paths: improve logging of orphaned paths Martin Wilck
2018-10-25 21:50   ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 20/21] libmultipath: sync_map_state: log failing paths Martin Wilck
2018-10-25 21:52   ` Benjamin Marzinski
2018-10-11 22:27 ` [PATCH 21/21] libmultipath/checkers: cleanup class/instance model Martin Wilck
2018-10-25 21:52   ` Benjamin Marzinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181025205930.GQ7100@octiron.msp.redhat.com \
    --to=bmarzins@redhat.com \
    --cc=dm-devel@redhat.com \
    --cc=mwilck@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox