From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
To: Claudiu Beznea <claudiu.beznea@kernel.org>
Cc: vkoul@kernel.org, Frank.Li@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, perex@perex.cz, tiwai@suse.com,
biju.das.jz@bp.renesas.com,
prabhakar.mahadev-lad.rj@bp.renesas.com, p.zabel@pengutronix.de,
geert+renesas@glider.be, kuninori.morimoto.gx@renesas.com,
long.luu.ur@renesas.com, claudiu.beznea@tuxon.dev,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sound@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
stable@vger.kernel.org, Frank Li <Frank.Li@nxp.com>,
John Madieu <john.madieu.xa@bp.renesas.com>
Subject: Re: [PATCH v6 01/18] dmaengine: sh: rz-dmac: Move interrupt request after everything is set up
Date: Thu, 28 May 2026 15:44:18 +0200 [thread overview]
Message-ID: <ahhGstBA7Lh09psv@tom-desktop> (raw)
In-Reply-To: <20260526084710.3491480-2-claudiu.beznea@kernel.org>
Hi Claudiu,
Thanks for your patch.
On Tue, May 26, 2026 at 11:46:53AM +0300, Claudiu Beznea wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Once the interrupt is requested, the interrupt handler may run immediately.
> Since the IRQ handler can access channel->ch_base, which is initialized
> only after requesting the IRQ, this may lead to invalid memory access.
> Likewise, the IRQ thread may access uninitialized data (the ld_free,
> ld_queue, and ld_active lists), which may also lead to issues.
>
> Request the interrupts only after everything is set up. To keep the error
> path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent().
>
Tested on RZ/G3E using dma along with rspi0
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Thanks, Tommaso
> Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
> Cc: stable@vger.kernel.org
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Tested-by: John Madieu <john.madieu.xa@bp.renesas.com>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v6:
> - collected tags
>
> Changes in v5:
> - none
>
> Changes in v4:
> - none, this patch is new
>
> drivers/dma/sh/rz-dmac.c | 88 +++++++++++++++-------------------------
> 1 file changed, 33 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c
> index 625ff29024de..9f206a33dcc6 100644
> --- a/drivers/dma/sh/rz-dmac.c
> +++ b/drivers/dma/sh/rz-dmac.c
> @@ -981,25 +981,6 @@ static int rz_dmac_chan_probe(struct rz_dmac *dmac,
> channel->index = index;
> channel->mid_rid = -EINVAL;
>
> - /* Request the channel interrupt. */
> - scnprintf(pdev_irqname, sizeof(pdev_irqname), "ch%u", index);
> - irq = platform_get_irq_byname(pdev, pdev_irqname);
> - if (irq < 0)
> - return irq;
> -
> - irqname = devm_kasprintf(dmac->dev, GFP_KERNEL, "%s:%u",
> - dev_name(dmac->dev), index);
> - if (!irqname)
> - return -ENOMEM;
> -
> - ret = devm_request_threaded_irq(dmac->dev, irq, rz_dmac_irq_handler,
> - rz_dmac_irq_handler_thread, 0,
> - irqname, channel);
> - if (ret) {
> - dev_err(dmac->dev, "failed to request IRQ %u (%d)\n", irq, ret);
> - return ret;
> - }
> -
> /* Set io base address for each channel */
> if (index < 8) {
> channel->ch_base = dmac->base + CHANNEL_0_7_OFFSET +
> @@ -1012,9 +993,9 @@ static int rz_dmac_chan_probe(struct rz_dmac *dmac,
> }
>
> /* Allocate descriptors */
> - lmdesc = dma_alloc_coherent(&pdev->dev,
> - sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
> - &channel->lmdesc.base_dma, GFP_KERNEL);
> + lmdesc = dmam_alloc_coherent(&pdev->dev,
> + sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
> + &channel->lmdesc.base_dma, GFP_KERNEL);
> if (!lmdesc) {
> dev_err(&pdev->dev, "Can't allocate memory (lmdesc)\n");
> return -ENOMEM;
> @@ -1030,7 +1011,24 @@ static int rz_dmac_chan_probe(struct rz_dmac *dmac,
> INIT_LIST_HEAD(&channel->ld_free);
> INIT_LIST_HEAD(&channel->ld_active);
>
> - return 0;
> + /* Request the channel interrupt. */
> + scnprintf(pdev_irqname, sizeof(pdev_irqname), "ch%u", index);
> + irq = platform_get_irq_byname(pdev, pdev_irqname);
> + if (irq < 0)
> + return irq;
> +
> + irqname = devm_kasprintf(dmac->dev, GFP_KERNEL, "%s:%u",
> + dev_name(dmac->dev), index);
> + if (!irqname)
> + return -ENOMEM;
> +
> + ret = devm_request_threaded_irq(dmac->dev, irq, rz_dmac_irq_handler,
> + rz_dmac_irq_handler_thread, 0,
> + irqname, channel);
> + if (ret)
> + dev_err(dmac->dev, "failed to request IRQ %u (%d)\n", irq, ret);
> +
> + return ret;
> }
>
> static void rz_dmac_put_device(void *_dev)
> @@ -1099,7 +1097,6 @@ static int rz_dmac_probe(struct platform_device *pdev)
> const char *irqname = "error";
> struct dma_device *engine;
> struct rz_dmac *dmac;
> - int channel_num;
> int ret;
> int irq;
> u8 i;
> @@ -1132,18 +1129,6 @@ static int rz_dmac_probe(struct platform_device *pdev)
> return PTR_ERR(dmac->ext_base);
> }
>
> - /* Register interrupt handler for error */
> - irq = platform_get_irq_byname_optional(pdev, irqname);
> - if (irq > 0) {
> - ret = devm_request_irq(&pdev->dev, irq, rz_dmac_irq_handler, 0,
> - irqname, NULL);
> - if (ret) {
> - dev_err(&pdev->dev, "failed to request IRQ %u (%d)\n",
> - irq, ret);
> - return ret;
> - }
> - }
> -
> /* Initialize the channels. */
> INIT_LIST_HEAD(&dmac->engine.channels);
>
> @@ -1169,6 +1154,18 @@ static int rz_dmac_probe(struct platform_device *pdev)
> goto err;
> }
>
> + /* Register interrupt handler for error */
> + irq = platform_get_irq_byname_optional(pdev, irqname);
> + if (irq > 0) {
> + ret = devm_request_irq(&pdev->dev, irq, rz_dmac_irq_handler, 0,
> + irqname, NULL);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request IRQ %u (%d)\n",
> + irq, ret);
> + goto err;
> + }
> + }
> +
> /* Register the DMAC as a DMA provider for DT. */
> ret = of_dma_controller_register(pdev->dev.of_node, rz_dmac_of_xlate,
> NULL);
> @@ -1210,16 +1207,6 @@ static int rz_dmac_probe(struct platform_device *pdev)
> dma_register_err:
> of_dma_controller_free(pdev->dev.of_node);
> err:
> - channel_num = i ? i - 1 : 0;
> - for (i = 0; i < channel_num; i++) {
> - struct rz_dmac_chan *channel = &dmac->channels[i];
> -
> - dma_free_coherent(&pdev->dev,
> - sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
> - channel->lmdesc.base,
> - channel->lmdesc.base_dma);
> - }
> -
> reset_control_assert(dmac->rstc);
> err_pm_runtime_put:
> pm_runtime_put(&pdev->dev);
> @@ -1232,18 +1219,9 @@ static int rz_dmac_probe(struct platform_device *pdev)
> static void rz_dmac_remove(struct platform_device *pdev)
> {
> struct rz_dmac *dmac = platform_get_drvdata(pdev);
> - unsigned int i;
>
> dma_async_device_unregister(&dmac->engine);
> of_dma_controller_free(pdev->dev.of_node);
> - for (i = 0; i < dmac->n_channels; i++) {
> - struct rz_dmac_chan *channel = &dmac->channels[i];
> -
> - dma_free_coherent(&pdev->dev,
> - sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
> - channel->lmdesc.base,
> - channel->lmdesc.base_dma);
> - }
> reset_control_assert(dmac->rstc);
> pm_runtime_put(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
> --
> 2.43.0
>
next prev parent reply other threads:[~2026-05-28 13:44 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-26 8:46 [PATCH v6 00/18] Renesas: dmaengine and ASoC fixes Claudiu Beznea
2026-05-26 8:46 ` [PATCH v6 01/18] dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Claudiu Beznea
2026-05-26 8:54 ` Biju Das
2026-05-26 9:45 ` Claudiu Beznea
2026-05-26 9:51 ` Biju Das
2026-05-26 10:25 ` Claudiu Beznea
2026-05-26 10:39 ` Biju Das
2026-05-26 9:20 ` sashiko-bot
2026-05-28 13:44 ` Tommaso Merciai [this message]
2026-05-26 8:46 ` [PATCH v6 02/18] dmaengine: sh: rz-dmac: Fix incorrect NULL check for list_first_entry() Claudiu Beznea
2026-05-26 9:03 ` sashiko-bot
2026-05-28 13:45 ` Tommaso Merciai
2026-05-26 8:46 ` [PATCH v6 03/18] dmaengine: sh: rz-dmac: Use list_first_entry_or_null() Claudiu Beznea
2026-05-28 13:45 ` Tommaso Merciai
2026-05-26 8:46 ` [PATCH v6 04/18] dmaengine: sh: rz-dmac: Use rz_dmac_disable_hw() Claudiu Beznea
2026-05-26 9:15 ` sashiko-bot
2026-05-28 13:46 ` Tommaso Merciai
2026-05-26 8:46 ` [PATCH v6 05/18] dmaengine: sh: rz-dmac: Add helper to compute the lmdesc address Claudiu Beznea
2026-05-28 13:47 ` Tommaso Merciai
2026-05-26 8:46 ` [PATCH v6 06/18] dmaengine: sh: rz-dmac: Save the start LM descriptor Claudiu Beznea
2026-05-26 9:41 ` sashiko-bot
2026-05-28 13:47 ` Tommaso Merciai
2026-05-26 8:46 ` [PATCH v6 07/18] dmaengine: sh: rz-dmac: Add helper to check if the channel is enabled Claudiu Beznea
2026-05-28 13:48 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 08/18] dmaengine: sh: rz-dmac: Add helper to check if the channel is paused Claudiu Beznea
2026-05-28 13:48 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 09/18] dmaengine: sh: rz-dmac: Use virt-dma APIs for channel descriptor processing Claudiu Beznea
2026-05-26 9:28 ` sashiko-bot
2026-05-28 13:49 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 10/18] dmaengine: sh: rz-dmac: Refactor pause/resume code Claudiu Beznea
2026-05-26 9:28 ` sashiko-bot
2026-05-28 13:50 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 11/18] dmaengine: sh: rz-dmac: Drop the update of channel->chctrl with CHCTRL_SETEN Claudiu Beznea
2026-05-26 9:11 ` sashiko-bot
2026-05-28 13:50 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 12/18] dmaengine: sh: rz-dmac: Add cyclic DMA support Claudiu Beznea
2026-05-26 9:31 ` sashiko-bot
2026-05-28 13:51 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 13/18] dmaengine: sh: rz-dmac: Adjust rz_dmac_chan_get_residue() to return error codes Claudiu Beznea
2026-05-28 13:51 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 14/18] dmaengine: sh: rz-dmac: Add runtime PM support Claudiu Beznea
2026-05-26 9:57 ` sashiko-bot
2026-05-28 13:52 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 15/18] dmaengine: sh: rz-dmac: Add suspend to RAM support Claudiu Beznea
2026-05-26 9:43 ` sashiko-bot
2026-05-28 14:38 ` Tommaso Merciai
2026-05-26 8:47 ` [PATCH v6 16/18] ASoC: renesas: rz-ssi: Add pause support Claudiu Beznea
2026-05-26 9:46 ` sashiko-bot
2026-05-26 8:47 ` [PATCH v6 17/18] ASoC: renesas: rz-ssi: Use generic PCM dmaengine APIs Claudiu Beznea
2026-05-26 10:00 ` sashiko-bot
2026-05-26 8:47 ` [PATCH v6 18/18] dmaengine: sh: rz-dmac: Set the Link End (LE) bit on the last descriptor Claudiu Beznea
2026-05-26 9:43 ` sashiko-bot
2026-05-28 14:39 ` Tommaso Merciai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ahhGstBA7Lh09psv@tom-desktop \
--to=tommaso.merciai.xr@bp.renesas.com \
--cc=Frank.Li@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=broonie@kernel.org \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=dmaengine@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=john.madieu.xa@bp.renesas.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=long.luu.ur@renesas.com \
--cc=p.zabel@pengutronix.de \
--cc=perex@perex.cz \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox