DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Prashant Gupta <prashant.gupta_3@nxp.com>
To: stephen@networkplumber.org, dev@dpdk.org
Cc: Gagandeep Singh <g.singh@nxp.com>
Subject: [PATCH v2 10/47] dma/dpaa2: validate IOVA in pre-populate helpers
Date: Thu, 10 Sep 2026 19:21:21 +0530	[thread overview]
Message-ID: <20260910135158.2181141-11-prashant.gupta_3@nxp.com> (raw)
In-Reply-To: <20260910135158.2181141-1-prashant.gupta_3@nxp.com>

From: Gagandeep Singh <g.singh@nxp.com>

fle_sdd_pre_populate() and fle_sdd_sg_pre_populate() converted the SDD
and SG entry virtual addresses to IOVA with DPAA2_VADDR_TO_IOVA(), which
does not verify that the range is actually mapped in the IOMMU/SMMU. An
unmapped buffer was silently programmed into the hardware descriptor,
leading to an SMMU translation fault at transfer time that is hard to
trace back to the missing mapping.

Use DPAA2_VADDR_TO_IOVA_AND_CHECK() for the SDD, source SG and
destination SG buffers and rte_panic() with the offending address and
size when the translation is missing, so the misconfiguration is caught
early and clearly.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 drivers/dma/dpaa2/dpaa2_qdma.c | 42 ++++++++++++++++++++++++++++------
 1 file changed, 35 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/dpaa2/dpaa2_qdma.c b/drivers/dma/dpaa2/dpaa2_qdma.c
index 6fd3530f0d..8a180ab400 100644
--- a/drivers/dma/dpaa2/dpaa2_qdma.c
+++ b/drivers/dma/dpaa2/dpaa2_qdma.c
@@ -187,7 +187,15 @@ fle_sdd_pre_populate(struct qdma_cntx_fle_sdd *fle_sdd,
 {
 	struct qbman_fle *fle = fle_sdd->fle;
 	struct qdma_sdd *sdd = fle_sdd->sdd;
-	uint64_t sdd_iova = DPAA2_VADDR_TO_IOVA(sdd);
+	uint64_t sdd_iova, iova_size;
+
+	iova_size = sizeof(struct qdma_sdd) * DPAA2_QDMA_MAX_SDD;
+	sdd_iova = DPAA2_VADDR_TO_IOVA_AND_CHECK(sdd, iova_size);
+	if (sdd_iova == RTE_BAD_IOVA) {
+		DPAA2_QDMA_ERR("No IOMMU map for sdd(%p)(size=%" PRIu64 ")",
+			sdd, iova_size);
+		return -ENOMEM;
+	}
 
 	/* first frame list to source descriptor */
 	DPAA2_SET_FLE_ADDR(&fle[DPAA2_QDMA_SDD_FLE], sdd_iova);
@@ -285,22 +293,36 @@ sg_entry_pre_populate(struct qdma_cntx_sg *sg_cntx)
 	}
 }
 
-static void
+static int
 fle_sdd_sg_pre_populate(struct qdma_cntx_sg *sg_cntx,
 	struct qdma_virt_queue *qdma_vq)
 {
 	struct qdma_sg_entry *src_sge = sg_cntx->sg_src_entry;
 	struct qdma_sg_entry *dst_sge = sg_cntx->sg_dst_entry;
-	rte_iova_t src_sge_iova, dst_sge_iova;
+	rte_iova_t src_sge_iova, dst_sge_iova, iova_size;
 	struct dpaa2_qdma_rbp *rbp = &qdma_vq->rbp;
 
 	memset(sg_cntx, 0, sizeof(struct qdma_cntx_sg));
 
-	src_sge_iova = DPAA2_VADDR_TO_IOVA(src_sge);
-	dst_sge_iova = DPAA2_VADDR_TO_IOVA(dst_sge);
+	iova_size = RTE_DPAAX_QDMA_JOB_SUBMIT_MAX *
+		sizeof(struct qdma_sg_entry);
+
+	src_sge_iova = DPAA2_VADDR_TO_IOVA_AND_CHECK(src_sge, iova_size);
+	if (src_sge_iova == RTE_BAD_IOVA) {
+		DPAA2_QDMA_ERR("No IOMMU map for src_sge(%p)(size=%" PRIu64 ")",
+			src_sge, (uint64_t)iova_size);
+		return -ENOMEM;
+	}
+
+	dst_sge_iova = DPAA2_VADDR_TO_IOVA_AND_CHECK(dst_sge, iova_size);
+	if (dst_sge_iova == RTE_BAD_IOVA) {
+		DPAA2_QDMA_ERR("No IOMMU map for dst_sge(%p)(size=%" PRIu64 ")",
+			dst_sge, (uint64_t)iova_size);
+		return -ENOMEM;
+	}
 
 	sg_entry_pre_populate(sg_cntx);
-	fle_sdd_pre_populate(&sg_cntx->fle_sdd,
+	return fle_sdd_pre_populate(&sg_cntx->fle_sdd,
 		rbp, src_sge_iova, dst_sge_iova,
 		QBMAN_FLE_WORD4_FMT_SGE);
 }
@@ -671,7 +693,13 @@ dpaa2_qdma_copy_sg(void *dev_private,
 
 	if (qdma_vq->fle_pre_populate) {
 		if (unlikely(!fle[DPAA2_QDMA_SRC_FLE].length)) {
-			fle_sdd_sg_pre_populate(cntx_sg, qdma_vq);
+			ret = fle_sdd_sg_pre_populate(cntx_sg, qdma_vq);
+			if (unlikely(ret)) {
+				if (!qdma_dev->is_silent)
+					rte_mempool_put(qdma_vq->fle_pool,
+						cntx_sg);
+				return ret;
+			}
 			if (!qdma_dev->is_silent && cntx_sg && idx_addr) {
 				for (i = 0; i < nb_src; i++)
 					cntx_sg->cntx_idx[i] = idx_addr[i];
-- 
2.43.0


  parent reply	other threads:[~2026-09-10 13:53 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-03 13:53 [PATCH 00/45] net/dpaa2: features and fixes for NXP DPAA2 drivers Prashant Gupta
2026-09-03 13:53 ` [PATCH 01/45] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt Prashant Gupta
2026-09-03 13:53 ` [PATCH 02/45] crypto/dpaa2_sec: fix FLE pool leak on sec FD build failure Prashant Gupta
2026-09-03 13:53 ` [PATCH 03/45] crypto/dpaa2_sec: support AES-GMAC Prashant Gupta
2026-09-03 13:53 ` [PATCH 04/45] crypto/dpaa2_sec: increase ivsize range for AES-CTR Prashant Gupta
2026-09-03 13:53 ` [PATCH 05/45] crypto/dpaa2_sec: add missing ECN capability Prashant Gupta
2026-09-03 13:53 ` [PATCH 06/45] crypto/dpaa2_sec: add support for env variables Prashant Gupta
2026-09-03 13:53 ` [PATCH 07/45] drivers: fix double free of dpaa2 device on uninit Prashant Gupta
2026-09-03 14:05   ` David Marchand
2026-09-03 13:53 ` [PATCH 08/45] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-03 13:53 ` [PATCH 09/45] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-03 13:53 ` [PATCH 10/45] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-03 13:53 ` [PATCH 11/45] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-03 13:53 ` [PATCH 12/45] dma/dpaa2: optimize context index ring enqueue Prashant Gupta
2026-09-03 13:53 ` [PATCH 13/45] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-03 13:53 ` [PATCH 14/45] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-03 13:53 ` [PATCH 15/45] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-03 13:53 ` [PATCH 16/45] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-03 13:53 ` [PATCH 17/45] net/dpaa2: support larger burst size Prashant Gupta
2026-09-03 13:53 ` [PATCH 18/45] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-03 13:53 ` [PATCH 19/45] net/dpaa2: support meter and policing Prashant Gupta
2026-09-03 13:53 ` [PATCH 20/45] net/dpaa2: support flow drop action Prashant Gupta
2026-09-03 13:53 ` [PATCH 21/45] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-03 13:53 ` [PATCH 22/45] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-03 13:53 ` [PATCH 23/45] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-03 13:53 ` [PATCH 24/45] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-03 13:53 ` [PATCH 25/45] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-03 13:53 ` [PATCH 26/45] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-03 13:53 ` [PATCH 27/45] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-03 13:53 ` [PATCH 28/45] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-03 13:53 ` [PATCH 29/45] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-03 13:53 ` [PATCH 30/45] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-03 13:53 ` [PATCH 31/45] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-03 13:53 ` [PATCH 32/45] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-03 13:53 ` [PATCH 33/45] net/dpaa2: ptp enhancements Prashant Gupta
2026-09-03 13:53 ` [PATCH 34/45] net/dpaa2: remove unused soft parser Tx code Prashant Gupta
2026-09-03 13:53 ` [PATCH 35/45] net/dpaa2: update MC dpni QoS and flow steering API Prashant Gupta
2026-09-03 13:53 ` [PATCH 36/45] net/dpaa2: enhance xstat implementation Prashant Gupta
2026-09-03 13:53 ` [PATCH 37/45] net/dpaa2: rework flow engine Prashant Gupta
2026-09-03 13:53 ` [PATCH 38/45] net/dpaa2: support Rx mempool per traffic class Prashant Gupta
2026-09-03 13:53 ` [PATCH 39/45] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-03 13:53 ` [PATCH 40/45] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-03 13:53 ` [PATCH 41/45] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-09-03 13:53 ` [PATCH 42/45] net/dpaa2: read MC version from device private data Prashant Gupta
2026-09-03 13:53 ` [PATCH 43/45] net/dpaa2: do not overwrite mbuf hash with drop priority Prashant Gupta
2026-09-03 13:53 ` [PATCH 44/45] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-03 13:53 ` [PATCH 45/45] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-09-07 20:35 ` [PATCH 00/45] net/dpaa2: features and fixes for NXP DPAA2 drivers Stephen Hemminger
2026-09-07 20:47 ` Stephen Hemminger
2026-09-07 21:03 ` Stephen Hemminger
2026-09-07 21:10 ` Stephen Hemminger
2026-09-07 21:22 ` Stephen Hemminger
2026-09-10 13:51 ` [PATCH v2 00/47] NXP DPAA2 driver updates and fixes Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 01/47] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 02/47] crypto/dpaa2_sec: fix FLE pool leak on sec FD build failure Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 03/47] crypto/dpaa2_sec: support AES-GMAC Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 04/47] crypto/dpaa2_sec: increase ivsize range for AES-CTR Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 05/47] crypto/dpaa2_sec: add missing ECN capability Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 06/47] crypto/dpaa2_sec: add support for env variables Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 07/47] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 08/47] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 09/47] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-10 13:51   ` Prashant Gupta [this message]
2026-09-10 13:51   ` [PATCH v2 11/47] dma/dpaa2: optimize context index ring enqueue Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 12/47] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 13/47] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 14/47] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 15/47] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 16/47] net/dpaa2: support larger burst size Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 17/47] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 18/47] net/dpaa2: support meter and policing Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 19/47] net/dpaa2: support flow drop action Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 20/47] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 21/47] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 22/47] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 23/47] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 24/47] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 25/47] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 26/47] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 27/47] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 28/47] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 29/47] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 30/47] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 31/47] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 32/47] net/dpaa2: ptp enhancements Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 33/47] net/dpaa2: remove unused soft parser Tx code Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 34/47] net/dpaa2: update MC dpni QoS and flow steering API Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 35/47] net/dpaa2: enhance xstat implementation Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 36/47] net/dpaa2: rework flow engine Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 37/47] net/dpaa2: support GENEVE flow item Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 38/47] net/dpaa2: support flow meter and policer actions Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 39/47] net/dpaa2: support flow table miss actions Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 40/47] net/dpaa2: support Rx mempool per traffic class Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 41/47] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 42/47] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 43/47] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 44/47] net/dpaa2: read MC version from device private data Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 45/47] net/dpaa2: do not overwrite mbuf hash with drop priority Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 46/47] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 47/47] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-09-10 16:57   ` [PATCH v2 00/47] NXP DPAA2 driver updates and fixes Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260910135158.2181141-11-prashant.gupta_3@nxp.com \
    --to=prashant.gupta_3@nxp.com \
    --cc=dev@dpdk.org \
    --cc=g.singh@nxp.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox