DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Prashant Gupta <prashant.gupta_3@nxp.com>
To: stephen@networkplumber.org, dev@dpdk.org
Cc: Jun Yang <jun.yang@nxp.com>, Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [PATCH v2 13/47] mempool/dpaa2: support ops index from primary in secondary
Date: Thu, 10 Sep 2026 19:21:24 +0530	[thread overview]
Message-ID: <20260910135158.2181141-14-prashant.gupta_3@nxp.com> (raw)
In-Reply-To: <20260910135158.2181141-1-prashant.gupta_3@nxp.com>

From: Jun Yang <jun.yang@nxp.com>

Secondary processes call rte_dpaa2_mpool_get_ops_idx() but the ops
index is registered only in the primary process. The secondary had no
way to learn the index, causing it to use the initial sentinel value
RTE_MEMPOOL_MAX_OPS_IDX and return an error.

Register an IPC action handler in the primary during pool creation.
Secondary processes send DPAA2_POOL_OPS_IDX_REQ over the
dpaa2_pool_mp_sync channel and receive the ops index back.

Also handle the case where rte_mp_action_register returns ENOTSUP
(e.g. no secondary process support enabled at build time) by
treating it as non-fatal, and improve the error message in
rte_hw_mbuf_free_pool to include the pool name.

Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 drivers/mempool/dpaa2/dpaa2_hw_mempool.c | 88 +++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 3 deletions(-)

diff --git a/drivers/mempool/dpaa2/dpaa2_hw_mempool.c b/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
index ee001d8ce0..f19b6c039a 100644
--- a/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
+++ b/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
@@ -34,16 +34,90 @@
 
 #include <dpaax_iova_table.h>
 
+#define DPAA2_POOL_MP_SYNC "dpaa2_pool_mp_sync"
+#define DPAA2_POOL_OPS_IDX_REQ 0x100
+#define DPAA2_POOL_OPS_IDX_RSP 0x101
+
+static int s_dpaa2_pool_mp_msg_setup;
+
+struct dpaa2_pool_mp_msg {
+	uint16_t msg_type;
+	uint8_t msg_data[];
+};
+
 RTE_EXPORT_INTERNAL_SYMBOL(rte_dpaa2_bpid_info)
 struct dpaa2_bp_info *rte_dpaa2_bpid_info;
 static struct dpaa2_bp_list *h_bp_list;
 
 static int16_t s_dpaa2_pool_ops_idx = RTE_MEMPOOL_MAX_OPS_IDX;
 
+static int
+dpaa2_mbuf_pool_mp_primary(const struct rte_mp_msg *msg,
+	const void *peer)
+{
+	struct rte_mp_msg reply;
+	const struct dpaa2_pool_mp_msg *req_msg = (const void *)msg->param;
+	struct dpaa2_pool_mp_msg *rsp_msg = (void *)reply.param;
+
+	memset(&reply, 0, sizeof(reply));
+
+	switch (req_msg->msg_type) {
+	case DPAA2_POOL_OPS_IDX_REQ:
+		rsp_msg->msg_type = DPAA2_POOL_OPS_IDX_RSP;
+		rte_memcpy(rsp_msg->msg_data, &s_dpaa2_pool_ops_idx,
+			sizeof(s_dpaa2_pool_ops_idx));
+		break;
+	default:
+		DPAA2_MEMPOOL_ERR("%s received invalid request(%d)",
+			__func__, req_msg->msg_type);
+		return -ENOTSUP;
+	}
+
+	strlcpy(reply.name, DPAA2_POOL_MP_SYNC, sizeof(reply.name));
+	return rte_mp_reply(&reply, peer);
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(rte_dpaa2_mpool_get_ops_idx)
 int rte_dpaa2_mpool_get_ops_idx(void)
 {
-	return s_dpaa2_pool_ops_idx;
+	struct rte_mp_msg mp_req;
+	struct rte_mp_reply mp_reply;
+	struct timespec ts = {.tv_sec = 5, .tv_nsec = 0};
+	int ret = 0;
+	struct dpaa2_pool_mp_msg *req_msg = (void *)mp_req.param;
+	struct dpaa2_pool_mp_msg *rsp_msg;
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY ||
+		s_dpaa2_pool_ops_idx != RTE_MEMPOOL_MAX_OPS_IDX)
+		return s_dpaa2_pool_ops_idx;
+
+	strlcpy(mp_req.name, DPAA2_POOL_MP_SYNC, sizeof(mp_req.name));
+	req_msg->msg_type = DPAA2_POOL_OPS_IDX_REQ;
+	memset(&mp_reply, 0, sizeof(struct rte_mp_reply));
+	ret = rte_mp_request_sync(&mp_req, &mp_reply, &ts);
+	if (ret) {
+		DPAA2_MEMPOOL_ERR("%s Failed to get response(%d)",
+			__func__, ret);
+		return ret;
+	}
+	if (!mp_reply.msgs) {
+		DPAA2_MEMPOOL_ERR("%s Failed to get response message",
+			__func__);
+		return -EINVAL;
+	}
+	rsp_msg = (void *)mp_reply.msgs;
+	if (rsp_msg->msg_type == DPAA2_POOL_OPS_IDX_RSP) {
+		rte_memcpy(&s_dpaa2_pool_ops_idx, rsp_msg->msg_data,
+			sizeof(s_dpaa2_pool_ops_idx));
+		ret = 0;
+	} else {
+		DPAA2_MEMPOOL_ERR("%s received invalid response(%d)",
+			__func__, rsp_msg->msg_type);
+		ret = -EINVAL;
+	}
+	free(mp_reply.msgs);
+
+	return ret;
 }
 
 static int
@@ -128,10 +202,18 @@ rte_hw_mbuf_create_pool(struct rte_mempool *mp)
 	if (s_dpaa2_pool_ops_idx == RTE_MEMPOOL_MAX_OPS_IDX) {
 		s_dpaa2_pool_ops_idx = mp->ops_index;
 	} else if (s_dpaa2_pool_ops_idx != mp->ops_index) {
-		DPAA2_MEMPOOL_ERR("Only single ops index only");
+		DPAA2_MEMPOOL_ERR("Single ops index only");
 		ret = -EINVAL;
 		goto err4;
 	}
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY &&
+		!s_dpaa2_pool_mp_msg_setup) {
+		ret = rte_mp_action_register(DPAA2_POOL_MP_SYNC,
+			dpaa2_mbuf_pool_mp_primary);
+		if (ret && rte_errno != ENOTSUP)
+			return ret;
+		s_dpaa2_pool_mp_msg_setup = 1;
+	}
 
 	bp_list->next = h_bp_list;
 	bp_list->mp = mp;
@@ -172,7 +254,7 @@ rte_hw_mbuf_free_pool(struct rte_mempool *mp)
 	struct dpaa2_dpbp_dev *dpbp_node;
 
 	if (!mp->pool_data) {
-		DPAA2_MEMPOOL_ERR("Not a valid dpaa2 buffer pool");
+		DPAA2_MEMPOOL_ERR("Not a valid dpaa2 buffer pool %s", mp->name);
 		return;
 	}
 
-- 
2.43.0


  parent reply	other threads:[~2026-09-10 13:53 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-03 13:53 [PATCH 00/45] net/dpaa2: features and fixes for NXP DPAA2 drivers Prashant Gupta
2026-09-03 13:53 ` [PATCH 01/45] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt Prashant Gupta
2026-09-03 13:53 ` [PATCH 02/45] crypto/dpaa2_sec: fix FLE pool leak on sec FD build failure Prashant Gupta
2026-09-03 13:53 ` [PATCH 03/45] crypto/dpaa2_sec: support AES-GMAC Prashant Gupta
2026-09-03 13:53 ` [PATCH 04/45] crypto/dpaa2_sec: increase ivsize range for AES-CTR Prashant Gupta
2026-09-03 13:53 ` [PATCH 05/45] crypto/dpaa2_sec: add missing ECN capability Prashant Gupta
2026-09-03 13:53 ` [PATCH 06/45] crypto/dpaa2_sec: add support for env variables Prashant Gupta
2026-09-03 13:53 ` [PATCH 07/45] drivers: fix double free of dpaa2 device on uninit Prashant Gupta
2026-09-03 14:05   ` David Marchand
2026-09-03 13:53 ` [PATCH 08/45] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-03 13:53 ` [PATCH 09/45] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-03 13:53 ` [PATCH 10/45] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-03 13:53 ` [PATCH 11/45] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-03 13:53 ` [PATCH 12/45] dma/dpaa2: optimize context index ring enqueue Prashant Gupta
2026-09-03 13:53 ` [PATCH 13/45] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-03 13:53 ` [PATCH 14/45] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-03 13:53 ` [PATCH 15/45] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-03 13:53 ` [PATCH 16/45] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-03 13:53 ` [PATCH 17/45] net/dpaa2: support larger burst size Prashant Gupta
2026-09-03 13:53 ` [PATCH 18/45] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-03 13:53 ` [PATCH 19/45] net/dpaa2: support meter and policing Prashant Gupta
2026-09-03 13:53 ` [PATCH 20/45] net/dpaa2: support flow drop action Prashant Gupta
2026-09-03 13:53 ` [PATCH 21/45] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-03 13:53 ` [PATCH 22/45] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-03 13:53 ` [PATCH 23/45] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-03 13:53 ` [PATCH 24/45] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-03 13:53 ` [PATCH 25/45] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-03 13:53 ` [PATCH 26/45] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-03 13:53 ` [PATCH 27/45] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-03 13:53 ` [PATCH 28/45] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-03 13:53 ` [PATCH 29/45] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-03 13:53 ` [PATCH 30/45] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-03 13:53 ` [PATCH 31/45] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-03 13:53 ` [PATCH 32/45] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-03 13:53 ` [PATCH 33/45] net/dpaa2: ptp enhancements Prashant Gupta
2026-09-03 13:53 ` [PATCH 34/45] net/dpaa2: remove unused soft parser Tx code Prashant Gupta
2026-09-03 13:53 ` [PATCH 35/45] net/dpaa2: update MC dpni QoS and flow steering API Prashant Gupta
2026-09-03 13:53 ` [PATCH 36/45] net/dpaa2: enhance xstat implementation Prashant Gupta
2026-09-03 13:53 ` [PATCH 37/45] net/dpaa2: rework flow engine Prashant Gupta
2026-09-03 13:53 ` [PATCH 38/45] net/dpaa2: support Rx mempool per traffic class Prashant Gupta
2026-09-03 13:53 ` [PATCH 39/45] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-03 13:53 ` [PATCH 40/45] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-03 13:53 ` [PATCH 41/45] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-09-03 13:53 ` [PATCH 42/45] net/dpaa2: read MC version from device private data Prashant Gupta
2026-09-03 13:53 ` [PATCH 43/45] net/dpaa2: do not overwrite mbuf hash with drop priority Prashant Gupta
2026-09-03 13:53 ` [PATCH 44/45] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-03 13:53 ` [PATCH 45/45] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-09-07 20:35 ` [PATCH 00/45] net/dpaa2: features and fixes for NXP DPAA2 drivers Stephen Hemminger
2026-09-07 20:47 ` Stephen Hemminger
2026-09-07 21:03 ` Stephen Hemminger
2026-09-07 21:10 ` Stephen Hemminger
2026-09-07 21:22 ` Stephen Hemminger
2026-09-10 13:51 ` [PATCH v2 00/47] NXP DPAA2 driver updates and fixes Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 01/47] crypto/dpaa2_sec: fix buffer overflow in GCM decrypt Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 02/47] crypto/dpaa2_sec: fix FLE pool leak on sec FD build failure Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 03/47] crypto/dpaa2_sec: support AES-GMAC Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 04/47] crypto/dpaa2_sec: increase ivsize range for AES-CTR Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 05/47] crypto/dpaa2_sec: add missing ECN capability Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 06/47] crypto/dpaa2_sec: add support for env variables Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 07/47] net/dpaa2: fix integer overflow in CCSR region mapping Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 08/47] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 09/47] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 10/47] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 11/47] dma/dpaa2: optimize context index ring enqueue Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 12/47] drivers: add dpaa2 DMA bypass memory translation option Prashant Gupta
2026-09-10 13:51   ` Prashant Gupta [this message]
2026-09-10 13:51   ` [PATCH v2 14/47] net/dpaa2: set Tx confirmation on device init Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 15/47] drivers: optimize dpaa2 Tx queue and channel mapping Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 16/47] net/dpaa2: support larger burst size Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 17/47] net/dpaa2: support MPLS and PPPoE flow distribution Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 18/47] net/dpaa2: support meter and policing Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 19/47] net/dpaa2: support flow drop action Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 20/47] net/dpaa2: set default flow miss action per device Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 21/47] net/dpaa2: identify Rx mbuf hash information by FLC Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 22/47] net/dpaa2: add minimum key size support Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 23/47] net/dpaa2: restructure dpaa2 parser processing Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 24/47] net/dpaa2: parse tunnel and fragmented packet types Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 25/47] net/dpaa2: remove unused soft parser driver Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 26/47] drivers: refresh dpaa2 MC and SoC version info Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 27/47] drivers: identify dpaa2 soft parser protocol Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 28/47] drivers: assign dpaa2 Rx CGID per traffic class Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 29/47] drivers: inherit dpaa2 rxq config for event queue Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 30/47] net/dpaa2: rename Rx queue flags Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 31/47] drivers: rework dpaa2 Tx confirmation Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 32/47] net/dpaa2: ptp enhancements Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 33/47] net/dpaa2: remove unused soft parser Tx code Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 34/47] net/dpaa2: update MC dpni QoS and flow steering API Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 35/47] net/dpaa2: enhance xstat implementation Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 36/47] net/dpaa2: rework flow engine Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 37/47] net/dpaa2: support GENEVE flow item Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 38/47] net/dpaa2: support flow meter and policer actions Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 39/47] net/dpaa2: support flow table miss actions Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 40/47] net/dpaa2: support Rx mempool per traffic class Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 41/47] drivers: consume dpaa2 DQRR entries in batches Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 42/47] drivers: resolve dpaa2 endpoint in the net driver Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 43/47] drivers: align dpaa2 event port depths with hardware rings Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 44/47] net/dpaa2: read MC version from device private data Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 45/47] net/dpaa2: do not overwrite mbuf hash with drop priority Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 46/47] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-10 13:51   ` [PATCH v2 47/47] net/dpaa2: reject Rx queue deferred start Prashant Gupta
2026-09-10 16:57   ` [PATCH v2 00/47] NXP DPAA2 driver updates and fixes Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260910135158.2181141-14-prashant.gupta_3@nxp.com \
    --to=prashant.gupta_3@nxp.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    --cc=jun.yang@nxp.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox