[drm/qxl v3 0/7] qxl: Various cleanups/fixes

[drm/qxl v3 0/7] qxl: Various cleanups/fixes

[Christophe Fergeau]

Hey,

Same series as v2 except that I removed the use of camel case in patch 6/7.
Now it's only using an anonymous enum + int.

Christophe



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[drm/qxl v3 1/7] qxl: Mark some internal functions as static

[Christophe Fergeau]

They are not used outside of their respective source file

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_cmd.c     | 2 +-
 drivers/gpu/drm/qxl/qxl_display.c | 4 ++--
 drivers/gpu/drm/qxl/qxl_drv.h     | 3 ---
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_cmd.c b/drivers/gpu/drm/qxl/qxl_cmd.c
index 04270f5..74fc936 100644
--- a/drivers/gpu/drm/qxl/qxl_cmd.c
+++ b/drivers/gpu/drm/qxl/qxl_cmd.c
@@ -578,7 +578,7 @@ int qxl_hw_surface_dealloc(struct qxl_device *qdev,
 	return 0;
 }
 
-int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf)
+static int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf)
 {
 	struct qxl_rect rect;
 	int ret;
diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 3aef127..8cf5177 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -36,7 +36,7 @@ static bool qxl_head_enabled(struct qxl_head *head)
 	return head->width && head->height;
 }
 
-void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned count)
+static void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned count)
 {
 	if (qdev->client_monitors_config &&
 	    count > qdev->client_monitors_config->count) {
@@ -559,7 +559,7 @@ static bool qxl_crtc_mode_fixup(struct drm_crtc *crtc,
 	return true;
 }
 
-void
+static void
 qxl_send_monitors_config(struct qxl_device *qdev)
 {
 	int i;
diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
index 8e633ca..a3c1131 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -394,13 +394,11 @@ qxl_framebuffer_init(struct drm_device *dev,
 		     struct drm_gem_object *obj,
 		     const struct drm_framebuffer_funcs *funcs);
 void qxl_display_read_client_monitors_config(struct qxl_device *qdev);
-void qxl_send_monitors_config(struct qxl_device *qdev);
 int qxl_create_monitors_object(struct qxl_device *qdev);
 int qxl_destroy_monitors_object(struct qxl_device *qdev);
 
 /* used by qxl_debugfs only */
 void qxl_crtc_set_from_monitors_config(struct qxl_device *qdev);
-void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned count);
 
 /* qxl_gem.c */
 int qxl_gem_init(struct qxl_device *qdev);
@@ -573,6 +571,5 @@ int qxl_bo_check_id(struct qxl_device *qdev, struct qxl_bo *bo);
 struct qxl_drv_surface *
 qxl_surface_lookup(struct drm_device *dev, int surface_id);
 void qxl_surface_evict(struct qxl_device *qdev, struct qxl_bo *surf, bool freeing);
-int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf);
 
 #endif
-- 
2.9.3

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/spice-devel

[drm/qxl v3 2/7] qxl: Remove unused prototype

[Christophe Fergeau]

qxl_crtc_set_from_monitors_config() is defined in qxl_drv.h but never
implemented.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_drv.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
index a3c1131..5a4720a 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -397,9 +397,6 @@ void qxl_display_read_client_monitors_config(struct qxl_device *qdev);
 int qxl_create_monitors_object(struct qxl_device *qdev);
 int qxl_destroy_monitors_object(struct qxl_device *qdev);
 
-/* used by qxl_debugfs only */
-void qxl_crtc_set_from_monitors_config(struct qxl_device *qdev);
-
 /* qxl_gem.c */
 int qxl_gem_init(struct qxl_device *qdev);
 void qxl_gem_fini(struct qxl_device *qdev);
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[drm/qxl v3 3/7] qxl: Add missing '\n' to qxl_io_log() call

[Christophe Fergeau]

The message has to be terminated by a newline as it's not going to get
added automatically.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c
index 28c1423..969c7c1 100644
--- a/drivers/gpu/drm/qxl/qxl_fb.c
+++ b/drivers/gpu/drm/qxl/qxl_fb.c
@@ -198,7 +198,7 @@ static int qxlfb_framebuffer_dirty(struct drm_framebuffer *fb,
 	/*
 	 * we are using a shadow draw buffer, at qdev->surface0_shadow
 	 */
-	qxl_io_log(qdev, "dirty x[%d, %d], y[%d, %d]", clips->x1, clips->x2,
+	qxl_io_log(qdev, "dirty x[%d, %d], y[%d, %d]\n", clips->x1, clips->x2,
 		   clips->y1, clips->y2);
 	image->dx = clips->x1;
 	image->dy = clips->y1;
-- 
2.9.3

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/spice-devel

[drm/qxl v3 4/7] qxl: Call qxl_gem_{init,fini}

[Christophe Fergeau]

qdev->gem.objects was initialized directly in qxl_device_init() rather
than going through qxl_gem_init(), and qxl_gem_fini() was never called.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_kms.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c
index e642242..af685f1 100644
--- a/drivers/gpu/drm/qxl/qxl_kms.c
+++ b/drivers/gpu/drm/qxl/qxl_kms.c
@@ -131,7 +131,7 @@ static int qxl_device_init(struct qxl_device *qdev,
 	mutex_init(&qdev->update_area_mutex);
 	mutex_init(&qdev->release_mutex);
 	mutex_init(&qdev->surf_evict_mutex);
-	INIT_LIST_HEAD(&qdev->gem.objects);
+	qxl_gem_init(qdev);
 
 	qdev->rom_base = pci_resource_start(pdev, 2);
 	qdev->rom_size = pci_resource_len(pdev, 2);
@@ -273,6 +273,7 @@ static void qxl_device_fini(struct qxl_device *qdev)
 	qxl_ring_free(qdev->command_ring);
 	qxl_ring_free(qdev->cursor_ring);
 	qxl_ring_free(qdev->release_ring);
+	qxl_gem_fini(qdev);
 	qxl_bo_fini(qdev);
 	io_mapping_free(qdev->surface_mapping);
 	io_mapping_free(qdev->vram_mapping);
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[drm/qxl v3 5/7] qxl: Remove qxl_bo_init() return value

[Christophe Fergeau]

It's always returning 0, and it's always ignored.
---
 drivers/gpu/drm/qxl/qxl_drv.h | 2 +-
 drivers/gpu/drm/qxl/qxl_gem.c | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
index 5a4720a..feac7e6 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -398,7 +398,7 @@ int qxl_create_monitors_object(struct qxl_device *qdev);
 int qxl_destroy_monitors_object(struct qxl_device *qdev);
 
 /* qxl_gem.c */
-int qxl_gem_init(struct qxl_device *qdev);
+void qxl_gem_init(struct qxl_device *qdev);
 void qxl_gem_fini(struct qxl_device *qdev);
 int qxl_gem_object_create(struct qxl_device *qdev, int size,
 			  int alignment, int initial_domain,
diff --git a/drivers/gpu/drm/qxl/qxl_gem.c b/drivers/gpu/drm/qxl/qxl_gem.c
index d9746e9..3f185c4 100644
--- a/drivers/gpu/drm/qxl/qxl_gem.c
+++ b/drivers/gpu/drm/qxl/qxl_gem.c
@@ -111,10 +111,9 @@ void qxl_gem_object_close(struct drm_gem_object *obj,
 {
 }
 
-int qxl_gem_init(struct qxl_device *qdev)
+void qxl_gem_init(struct qxl_device *qdev)
 {
 	INIT_LIST_HEAD(&qdev->gem.objects);
-	return 0;
 }
 
 void qxl_gem_fini(struct qxl_device *qdev)
-- 
2.9.3

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/spice-devel

Re: [drm/qxl v3 5/7] qxl: Remove qxl_bo_init() return value

[Frediano Ziglio]

> 
> It's always returning 0, and it's always ignored.

Missing the Signed-off-by.

Acked-by: Frediano Ziglio <fziglio@redhat.com>

You should add the Acked-by message when posting new
versions of the patch series.

Frediano


> ---
>  drivers/gpu/drm/qxl/qxl_drv.h | 2 +-
>  drivers/gpu/drm/qxl/qxl_gem.c | 3 +--
>  2 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h
> index 5a4720a..feac7e6 100644
> --- a/drivers/gpu/drm/qxl/qxl_drv.h
> +++ b/drivers/gpu/drm/qxl/qxl_drv.h
> @@ -398,7 +398,7 @@ int qxl_create_monitors_object(struct qxl_device *qdev);
>  int qxl_destroy_monitors_object(struct qxl_device *qdev);
>  
>  /* qxl_gem.c */
> -int qxl_gem_init(struct qxl_device *qdev);
> +void qxl_gem_init(struct qxl_device *qdev);
>  void qxl_gem_fini(struct qxl_device *qdev);
>  int qxl_gem_object_create(struct qxl_device *qdev, int size,
>  			  int alignment, int initial_domain,
> diff --git a/drivers/gpu/drm/qxl/qxl_gem.c b/drivers/gpu/drm/qxl/qxl_gem.c
> index d9746e9..3f185c4 100644
> --- a/drivers/gpu/drm/qxl/qxl_gem.c
> +++ b/drivers/gpu/drm/qxl/qxl_gem.c
> @@ -111,10 +111,9 @@ void qxl_gem_object_close(struct drm_gem_object *obj,
>  {
>  }
>  
> -int qxl_gem_init(struct qxl_device *qdev)
> +void qxl_gem_init(struct qxl_device *qdev)
>  {
>  	INIT_LIST_HEAD(&qdev->gem.objects);
> -	return 0;
>  }
>  
>  void qxl_gem_fini(struct qxl_device *qdev)
_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/spice-devel

[drm/qxl v3 6/7] qxl: Don't notify userspace when monitors config is unchanged

[Christophe Fergeau]

When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt,
we currently always notify userspace that there was some hotplug event.

However, gnome-shell/mutter is reacting to this event by attempting a
resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
and then drmModeSetCrtc. This has the side-effect of causing
qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
surface was destroyed and created. After going through QEMU and then the
remote SPICE client, a new identical monitors config message will be
sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
be emitted, and the same scenario occurring again.

As destroying/creating the primary surface causes a visible screen
flicker, this makes the guest hard to use (
https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).

This commit checks if the screen configuration we received is the same
one as the current one, and does not notify userspace about it if that's
the case.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_display.c | 62 ++++++++++++++++++++++++++++++++-------
 1 file changed, 52 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 8cf5177..518333c 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -57,11 +57,18 @@ static void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned c
 	qdev->client_monitors_config->count = count;
 }
 
+enum {
+	MONITORS_CONFIG_MODIFIED,
+	MONITORS_CONFIG_UNCHANGED,
+	MONITORS_CONFIG_BAD_CRC,
+};
+
 static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
 {
 	int i;
 	int num_monitors;
 	uint32_t crc;
+	int status = MONITORS_CONFIG_UNCHANGED;
 
 	num_monitors = qdev->rom->client_monitors_config.count;
 	crc = crc32(0, (const uint8_t *)&qdev->rom->client_monitors_config,
@@ -70,7 +77,7 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
 		qxl_io_log(qdev, "crc mismatch: have %X (%zd) != %X\n", crc,
 			   sizeof(qdev->rom->client_monitors_config),
 			   qdev->rom->client_monitors_config_crc);
-		return 1;
+		return MONITORS_CONFIG_BAD_CRC;
 	}
 	if (num_monitors > qdev->monitors_config->max_allowed) {
 		DRM_DEBUG_KMS("client monitors list will be truncated: %d < %d\n",
@@ -79,6 +86,10 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
 	} else {
 		num_monitors = qdev->rom->client_monitors_config.count;
 	}
+	if (qdev->client_monitors_config
+	      && (num_monitors != qdev->client_monitors_config->count)) {
+		status = MONITORS_CONFIG_MODIFIED;
+	}
 	qxl_alloc_client_monitors_config(qdev, num_monitors);
 	/* we copy max from the client but it isn't used */
 	qdev->client_monitors_config->max_allowed =
@@ -88,17 +99,39 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
 			&qdev->rom->client_monitors_config.heads[i];
 		struct qxl_head *client_head =
 			&qdev->client_monitors_config->heads[i];
-		client_head->x = c_rect->left;
-		client_head->y = c_rect->top;
-		client_head->width = c_rect->right - c_rect->left;
-		client_head->height = c_rect->bottom - c_rect->top;
-		client_head->surface_id = 0;
-		client_head->id = i;
-		client_head->flags = 0;
+		if (client_head->x != c_rect->left) {
+			client_head->x = c_rect->left;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
+		if (client_head->y != c_rect->top) {
+			client_head->y = c_rect->top;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
+		if (client_head->width != c_rect->right - c_rect->left) {
+			client_head->width = c_rect->right - c_rect->left;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
+		if (client_head->height != c_rect->bottom - c_rect->top) {
+			client_head->height = c_rect->bottom - c_rect->top;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
+		if (client_head->surface_id != 0) {
+			client_head->surface_id = 0;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
+		if (client_head->id != i) {
+			client_head->id = i;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
+		if (client_head->flags != 0) {
+			client_head->flags = 0;
+			status = MONITORS_CONFIG_MODIFIED;
+		}
 		DRM_DEBUG_KMS("read %dx%d+%d+%d\n", client_head->width, client_head->height,
 			  client_head->x, client_head->y);
 	}
-	return 0;
+
+	return status;
 }
 
 static void qxl_update_offset_props(struct qxl_device *qdev)
@@ -124,9 +157,18 @@ void qxl_display_read_client_monitors_config(struct qxl_device *qdev)
 {
 
 	struct drm_device *dev = qdev->ddev;
-	while (qxl_display_copy_rom_client_monitors_config(qdev)) {
+	int status;
+
+	status = qxl_display_copy_rom_client_monitors_config(qdev);
+	while (status == MONITORS_CONFIG_BAD_CRC) {
 		qxl_io_log(qdev, "failed crc check for client_monitors_config,"
 				 " retrying\n");
+		status = qxl_display_copy_rom_client_monitors_config(qdev);
+	}
+	if (status == MONITORS_CONFIG_UNCHANGED) {
+		qxl_io_log(qdev, "config unchanged\n");
+		DRM_DEBUG("ignoring unchanged client monitors config");
+		return;
 	}
 
 	drm_modeset_lock_all(dev);
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [Spice-devel] [drm/qxl v3 6/7] qxl: Don't notify userspace when monitors config is unchanged

[Frediano Ziglio]

> 
> When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG
> interrupt,
> we currently always notify userspace that there was some hotplug event.
> 
> However, gnome-shell/mutter is reacting to this event by attempting a
> resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
> and then drmModeSetCrtc. This has the side-effect of causing
> qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
> surface was destroyed and created. After going through QEMU and then the
> remote SPICE client, a new identical monitors config message will be
> sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
> be emitted, and the same scenario occurring again.
> 
> As destroying/creating the primary surface causes a visible screen
> flicker, this makes the guest hard to use (
> https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).
> 
> This commit checks if the screen configuration we received is the same
> one as the current one, and does not notify userspace about it if that's
> the case.
> 
> Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
> ---
>  drivers/gpu/drm/qxl/qxl_display.c | 62
>  ++++++++++++++++++++++++++++++++-------
>  1 file changed, 52 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/qxl/qxl_display.c
> b/drivers/gpu/drm/qxl/qxl_display.c
> index 8cf5177..518333c 100644
> --- a/drivers/gpu/drm/qxl/qxl_display.c
> +++ b/drivers/gpu/drm/qxl/qxl_display.c
> @@ -57,11 +57,18 @@ static void qxl_alloc_client_monitors_config(struct
> qxl_device *qdev, unsigned c
>  	qdev->client_monitors_config->count = count;
>  }
>  
> +enum {
> +	MONITORS_CONFIG_MODIFIED,
> +	MONITORS_CONFIG_UNCHANGED,
> +	MONITORS_CONFIG_BAD_CRC,
> +};
> +
>  static int qxl_display_copy_rom_client_monitors_config(struct qxl_device
>  *qdev)
>  {
>  	int i;
>  	int num_monitors;
>  	uint32_t crc;
> +	int status = MONITORS_CONFIG_UNCHANGED;
>  
>  	num_monitors = qdev->rom->client_monitors_config.count;
>  	crc = crc32(0, (const uint8_t *)&qdev->rom->client_monitors_config,
> @@ -70,7 +77,7 @@ static int
> qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
>  		qxl_io_log(qdev, "crc mismatch: have %X (%zd) != %X\n", crc,
>  			   sizeof(qdev->rom->client_monitors_config),
>  			   qdev->rom->client_monitors_config_crc);
> -		return 1;
> +		return MONITORS_CONFIG_BAD_CRC;
>  	}
>  	if (num_monitors > qdev->monitors_config->max_allowed) {
>  		DRM_DEBUG_KMS("client monitors list will be truncated: %d < %d\n",
> @@ -79,6 +86,10 @@ static int
> qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
>  	} else {
>  		num_monitors = qdev->rom->client_monitors_config.count;
>  	}
> +	if (qdev->client_monitors_config
> +	      && (num_monitors != qdev->client_monitors_config->count)) {
> +		status = MONITORS_CONFIG_MODIFIED;
> +	}
>  	qxl_alloc_client_monitors_config(qdev, num_monitors);
>  	/* we copy max from the client but it isn't used */
>  	qdev->client_monitors_config->max_allowed =
> @@ -88,17 +99,39 @@ static int
> qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
>  			&qdev->rom->client_monitors_config.heads[i];
>  		struct qxl_head *client_head =
>  			&qdev->client_monitors_config->heads[i];
> -		client_head->x = c_rect->left;
> -		client_head->y = c_rect->top;
> -		client_head->width = c_rect->right - c_rect->left;
> -		client_head->height = c_rect->bottom - c_rect->top;
> -		client_head->surface_id = 0;
> -		client_head->id = i;
> -		client_head->flags = 0;
> +		if (client_head->x != c_rect->left) {
> +			client_head->x = c_rect->left;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
> +		if (client_head->y != c_rect->top) {
> +			client_head->y = c_rect->top;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
> +		if (client_head->width != c_rect->right - c_rect->left) {
> +			client_head->width = c_rect->right - c_rect->left;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
> +		if (client_head->height != c_rect->bottom - c_rect->top) {
> +			client_head->height = c_rect->bottom - c_rect->top;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
> +		if (client_head->surface_id != 0) {
> +			client_head->surface_id = 0;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
> +		if (client_head->id != i) {
> +			client_head->id = i;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
> +		if (client_head->flags != 0) {
> +			client_head->flags = 0;
> +			status = MONITORS_CONFIG_MODIFIED;
> +		}
>  		DRM_DEBUG_KMS("read %dx%d+%d+%d\n", client_head->width,
>  		client_head->height,
>  			  client_head->x, client_head->y);
>  	}
> -	return 0;
> +
> +	return status;
>  }
>  
>  static void qxl_update_offset_props(struct qxl_device *qdev)
> @@ -124,9 +157,18 @@ void qxl_display_read_client_monitors_config(struct
> qxl_device *qdev)
>  {
>  
>  	struct drm_device *dev = qdev->ddev;
> -	while (qxl_display_copy_rom_client_monitors_config(qdev)) {
> +	int status;
> +
> +	status = qxl_display_copy_rom_client_monitors_config(qdev);
> +	while (status == MONITORS_CONFIG_BAD_CRC) {
>  		qxl_io_log(qdev, "failed crc check for client_monitors_config,"
>  				 " retrying\n");
> +		status = qxl_display_copy_rom_client_monitors_config(qdev);
> +	}
> +	if (status == MONITORS_CONFIG_UNCHANGED) {
> +		qxl_io_log(qdev, "config unchanged\n");
> +		DRM_DEBUG("ignoring unchanged client monitors config");

Why log and debug? Looks like a missing debug cleanup.

> +		return;
>  	}
>  
>  	drm_modeset_lock_all(dev);

Frediano
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [drm/qxl v3 6/7] qxl: Don't notify userspace when monitors config is unchanged

[Christophe Fergeau]

[-- Attachment #1.1: Type: text/plain, Size: 953 bytes --]

On Mon, Nov 07, 2016 at 04:08:48AM -0500, Frediano Ziglio wrote:
> > @@ -124,9 +157,18 @@ void qxl_display_read_client_monitors_config(struct
> > qxl_device *qdev)
> >  {
> >  
> >  	struct drm_device *dev = qdev->ddev;
> > -	while (qxl_display_copy_rom_client_monitors_config(qdev)) {
> > +	int status;
> > +
> > +	status = qxl_display_copy_rom_client_monitors_config(qdev);
> > +	while (status == MONITORS_CONFIG_BAD_CRC) {
> >  		qxl_io_log(qdev, "failed crc check for client_monitors_config,"
> >  				 " retrying\n");
> > +		status = qxl_display_copy_rom_client_monitors_config(qdev);
> > +	}
> > +	if (status == MONITORS_CONFIG_UNCHANGED) {
> > +		qxl_io_log(qdev, "config unchanged\n");
> > +		DRM_DEBUG("ignoring unchanged client monitors config");
> 
> Why log and debug? Looks like a missing debug cleanup.

qxl_io_log is going to be output host-side, DRM_DEBUG is guest-side,
having both was intentional.

Christophe

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[-- Attachment #2: Type: text/plain, Size: 166 bytes --]

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/spice-devel

[drm/qxl v3 7/7] qxl: Allow resolution which are not multiple of 8

[Christophe Fergeau]

The use of drm_cvt_mode() in qxl_add_monitors_config_modes() means that
the resolutions we are going to present to user-space are going to be
rounded down to a multiple of 8. In the QXL arbitrary resolution case,
this is not useful.
This commit forces the actual width/height that was requested by the
client in the drm_display_mode structure rather than keeping the
rounded version.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_display.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 518333c..fa99481 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -199,6 +199,9 @@ static int qxl_add_monitors_config_modes(struct drm_connector *connector,
 	mode = drm_cvt_mode(dev, head->width, head->height, 60, false, false,
 			    false);
 	mode->type |= DRM_MODE_TYPE_PREFERRED;
+	mode->hdisplay = head->width;
+	mode->vdisplay = head->height;
+	drm_mode_set_name(mode);
 	*pwidth = head->width;
 	*pheight = head->height;
 	drm_mode_probed_add(connector, mode);
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [drm/qxl v3 0/7] qxl: Various cleanups/fixes

[Gerd Hoffmann]

On Mo, 2016-11-07 at 09:00 +0100, Christophe Fergeau wrote:
> Hey,
> 
> Same series as v2 except that I removed the use of camel case in patch 6/7.
> Now it's only using an anonymous enum + int.

Can you please not drop the "PATCH" from $subject?

thanks,
  Gerd

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel