[PATCH v2 01/10] drm: Add DP PSR2 sink enable bit

[PATCH v2 01/10] drm: Add DP PSR2 sink enable bit

[José Roberto de Souza]

To comply with eDP1.4a this bit should be set when enabling PSR2.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 include/drm/drm_dp_helper.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 62903bae0221..0bac0c7d0dec 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -478,6 +478,7 @@
 # define DP_PSR_FRAME_CAPTURE		    (1 << 3)
 # define DP_PSR_SELECTIVE_UPDATE	    (1 << 4)
 # define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS     (1 << 5)
+# define DP_PSR_ENABLE_PSR2		    (1 << 6) /* eDP 1.4a */
 
 #define DP_ADAPTER_CTRL			    0x1a0
 # define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE   (1 << 0)
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 02/10] drm: Add DP last received PSR SDP VSC register and bits

[José Roberto de Souza]

This is a register to help debug what is in the last SDP VSC
packet revived by sink.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 include/drm/drm_dp_helper.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 0bac0c7d0dec..91c9bcd4196f 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -795,6 +795,15 @@
 # define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_MASK	(0xf << 4)
 # define DP_LAST_ACTUAL_SYNCHRONIZATION_LATENCY_SHIFT	4
 
+#define DP_LAST_RECEIVED_PSR_SDP	    0x200a /* eDP 1.2 */
+# define DP_PSR_STATE_BIT		    (1 << 0) /* eDP 1.2 */
+# define DP_UPDATE_RFB_BIT		    (1 << 1) /* eDP 1.2 */
+# define DP_CRC_VALID_BIT		    (1 << 2) /* eDP 1.2 */
+# define DP_SU_VALID			    (1 << 3) /* eDP 1.4 */
+# define DP_FIRST_SCAN_LINE_SU_REGION	    (1 << 4) /* eDP 1.4 */
+# define DP_LAST_SCAN_LINE_SU_REGION	    (1 << 5) /* eDP 1.4 */
+# define DP_Y_COORDINATE_VALID		    (1 << 6) /* eDP 1.4a */
+
 #define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
 # define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
 
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 03/10] drm/i915/psr: Nuke aux frame sync

[José Roberto de Souza]

eDP spec states that aux frame is required to do PSR2 selective
update but i915 don't fully implement it. It sends the aux frame
sync messages but the value is always zero as the GTC is not enabled
in driver.

Through tests was findout that pannels can do selective update when
the y-coordinate is also included in SDP, that is why it is required
to run PSR2 in i915.

A dummy value is not useful at all to sink, so removing everything
related to aux frame sync, if GTC is enabled we can bring this back.

Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h  |  1 -
 drivers/gpu/drm/i915/intel_psr.c | 24 +-----------------------
 2 files changed, 1 insertion(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 800230ba1c3b..fade9029b6f5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -603,7 +603,6 @@ struct i915_psr {
 	struct delayed_work work;
 	unsigned busy_frontbuffer_bits;
 	bool psr2_support;
-	bool aux_frame_sync;
 	bool link_standby;
 	bool y_cord_support;
 	bool colorimetry_support;
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index b8e083e10029..c0a6f63b586f 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -137,16 +137,9 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 
 	if (INTEL_GEN(dev_priv) >= 9 &&
 	    (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
-		uint8_t frame_sync_cap;
 
 		dev_priv->psr.sink_support = true;
-		if (drm_dp_dpcd_readb(&intel_dp->aux,
-				      DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP,
-				      &frame_sync_cap) != 1)
-			frame_sync_cap = 0;
-		dev_priv->psr.aux_frame_sync = frame_sync_cap & DP_AUX_FRAME_SYNC_CAP;
-		/* PSR2 needs frame sync as well */
-		dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync;
+		dev_priv->psr.psr2_support = true;
 		DRM_DEBUG_KMS("PSR2 %s on sink",
 			      dev_priv->psr.psr2_support ? "supported" : "not supported");
 
@@ -268,12 +261,6 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 	struct drm_device *dev = dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
-
-	/* Enable AUX frame sync at sink */
-	if (dev_priv->psr.aux_frame_sync)
-		drm_dp_dpcd_writeb(&intel_dp->aux,
-				DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
-				DP_AUX_FRAME_SYNC_ENABLE);
 	/* Enable ALPM at sink for psr2 */
 	if (dev_priv->psr.psr2_support && dev_priv->psr.alpm)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
@@ -712,11 +699,6 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 		i915_reg_t psr_status;
 		u32 psr_status_mask;
 
-		if (dev_priv->psr.aux_frame_sync)
-			drm_dp_dpcd_writeb(&intel_dp->aux,
-					DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
-					0);
-
 		if (dev_priv->psr.psr2_support) {
 			psr_status = EDP_PSR2_STATUS;
 			psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
@@ -860,10 +842,6 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 		return;
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.aux_frame_sync)
-			drm_dp_dpcd_writeb(&intel_dp->aux,
-					DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
-					0);
 		if (dev_priv->psr.psr2_support) {
 			val = I915_READ(EDP_PSR2_CTL);
 			WARN_ON(!(val & EDP_PSR2_ENABLE));
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 04/10] drm/i915/psr: Tie PSR2 support to Y coordinate requirement

[José Roberto de Souza]

Although i915 don't implement aux sync frame through tests was
findout that pannels can do selective update when the y-coordinate
is also included in SDP, that is why it is required to run PSR2 in
i915.

So moving to only one place the sink requirements that the actual
driver needs to enable PSR2.

Also intel_psr2_config_valid() is called every time the crtc config
is computed, wasting some time every time it was checking for
Y coordinate requirement.

This allow us to nuke y_cord_support and some of VSC setup code that
was handling a scenario that would never happen(PSR2 without Y
coordinate).

Also here renaming intel_dp_get_y_cord_status() to
intel_dp_get_y_coord_required() as it more accurate to the name and
function of bit according to eDP spec.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h  |  1 -
 drivers/gpu/drm/i915/intel_psr.c | 46 +++++++++++++++++-----------------------
 2 files changed, 19 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fade9029b6f5..92cf6f4e9e00 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -604,7 +604,6 @@ struct i915_psr {
 	unsigned busy_frontbuffer_bits;
 	bool psr2_support;
 	bool link_standby;
-	bool y_cord_support;
 	bool colorimetry_support;
 	bool alpm;
 	bool has_hw_tracking;
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index c0a6f63b586f..fb2d0fe7106b 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -93,7 +93,7 @@ static void psr_aux_io_power_put(struct intel_dp *intel_dp)
 	intel_display_power_put(dev_priv, psr_aux_domain(intel_dp));
 }
 
-static bool intel_dp_get_y_cord_status(struct intel_dp *intel_dp)
+static bool intel_dp_get_y_coord_required(struct intel_dp *intel_dp)
 {
 	uint8_t psr_caps = 0;
 
@@ -130,22 +130,29 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 	drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT, intel_dp->psr_dpcd,
 			 sizeof(intel_dp->psr_dpcd));
 
-	if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
+	if (intel_dp->psr_dpcd[0]) {
 		dev_priv->psr.sink_support = true;
 		DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
 	}
 
 	if (INTEL_GEN(dev_priv) >= 9 &&
-	    (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) {
-
-		dev_priv->psr.sink_support = true;
-		dev_priv->psr.psr2_support = true;
+	    (intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_IS_SUPPORTED)) {
+		/*
+		 * All panels that supports PSR version 03h (PSR2 +
+		 * Y-coordinate) can handle Y-coordinates in VSC but we are
+		 * only sure that it is going to be used when required by the
+		 * panel. This way panel is capable to do selective update
+		 * without a aux frame sync.
+		 *
+		 * To support PSR version 02h and PSR version 03h without
+		 * Y-coordinate requirement panels we would need to enable
+		 * GTC first.
+		 */
+		dev_priv->psr.psr2_support = intel_dp_get_y_coord_required(intel_dp);
 		DRM_DEBUG_KMS("PSR2 %s on sink",
 			      dev_priv->psr.psr2_support ? "supported" : "not supported");
 
 		if (dev_priv->psr.psr2_support) {
-			dev_priv->psr.y_cord_support =
-				intel_dp_get_y_cord_status(intel_dp);
 			dev_priv->psr.colorimetry_support =
 				intel_dp_get_colorimetry_status(intel_dp);
 			dev_priv->psr.alpm =
@@ -191,16 +198,12 @@ static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
 		memset(&psr_vsc, 0, sizeof(psr_vsc));
 		psr_vsc.sdp_header.HB0 = 0;
 		psr_vsc.sdp_header.HB1 = 0x7;
-		if (dev_priv->psr.colorimetry_support &&
-		    dev_priv->psr.y_cord_support) {
+		if (dev_priv->psr.colorimetry_support) {
 			psr_vsc.sdp_header.HB2 = 0x5;
 			psr_vsc.sdp_header.HB3 = 0x13;
-		} else if (dev_priv->psr.y_cord_support) {
+		} else {
 			psr_vsc.sdp_header.HB2 = 0x4;
 			psr_vsc.sdp_header.HB3 = 0xe;
-		} else {
-			psr_vsc.sdp_header.HB2 = 0x3;
-			psr_vsc.sdp_header.HB3 = 0xc;
 		}
 	} else {
 		/* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
@@ -457,15 +460,6 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 		return false;
 	}
 
-	/*
-	 * FIXME:enable psr2 only for y-cordinate psr2 panels
-	 * After gtc implementation , remove this restriction.
-	 */
-	if (!dev_priv->psr.y_cord_support) {
-		DRM_DEBUG_KMS("PSR2 not enabled, panel does not support Y coordinate\n");
-		return false;
-	}
-
 	return true;
 }
 
@@ -565,7 +559,6 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 	struct drm_device *dev = dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	u32 chicken;
 
 	psr_aux_io_power_get(intel_dp);
 
@@ -576,9 +569,8 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 		hsw_psr_setup_aux(intel_dp);
 
 	if (dev_priv->psr.psr2_support) {
-		chicken = PSR2_VSC_ENABLE_PROG_HEADER;
-		if (dev_priv->psr.y_cord_support)
-			chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
+		u32 chicken = PSR2_VSC_ENABLE_PROG_HEADER
+			      | PSR2_ADD_VERTICAL_LINE_COUNT;
 		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
 
 		I915_WRITE(EDP_PSR_DEBUG,
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 05/10] drm/i915/psr/cnl: Enable Y-coordinate support in source

[José Roberto de Souza]

From: "Souza, Jose" <jose.souza@intel.com>

For Geminilake and Cannonlake+ the Y-coordinate support must be
enabled in PSR2_CTL too.

Spec: 7713 and 7720

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  |  3 +++
 drivers/gpu/drm/i915/intel_psr.c | 16 ++++++++++++----
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1bca695f404b..1c6f463bc919 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4052,6 +4052,8 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
+#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+ */
 #define   EDP_MAX_SU_DISABLE_TIME(t)	((t)<<20)
 #define   EDP_MAX_SU_DISABLE_TIME_MASK	(0x1f<<20)
 #define   EDP_PSR2_TP2_TIME_500		(0<<8)
@@ -7058,6 +7060,7 @@ enum {
 #define CHICKEN_TRANS_A         0x420c0
 #define CHICKEN_TRANS_B         0x420c4
 #define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A, CHICKEN_TRANS_B)
+#define  VSC_DATA_SEL_SOFTWARE_CONTROL	(1<<25) /* GLK and CNL+ */
 #define  DDI_TRAINING_OVERRIDE_ENABLE	(1<<19)
 #define  DDI_TRAINING_OVERRIDE_VALUE	(1<<18)
 #define  DDIE_TRAINING_OVERRIDE_ENABLE	(1<<17) /* CHICKEN_TRANS_A only */
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index fb2d0fe7106b..84e1f8be5c48 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -386,8 +386,10 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	/* FIXME: selective update is probably totally broken because it doesn't
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
 	 * good enough. */
-	val |= EDP_PSR2_ENABLE |
-		EDP_SU_TRACK_ENABLE;
+	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
+		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
+	}
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 				DP_SYNCHRONIZATION_LATENCY_IN_SINK,
@@ -569,8 +571,14 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 		hsw_psr_setup_aux(intel_dp);
 
 	if (dev_priv->psr.psr2_support) {
-		u32 chicken = PSR2_VSC_ENABLE_PROG_HEADER
-			      | PSR2_ADD_VERTICAL_LINE_COUNT;
+		u32 chicken = I915_READ(CHICKEN_TRANS(cpu_transcoder));
+
+		if (INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv))
+			chicken |= (PSR2_VSC_ENABLE_PROG_HEADER
+				   | PSR2_ADD_VERTICAL_LINE_COUNT);
+
+		else
+			chicken &= ~VSC_DATA_SEL_SOFTWARE_CONTROL;
 		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
 
 		I915_WRITE(EDP_PSR_DEBUG,
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 06/10] drm/i915/psr: Do not override PSR2 sink support

[José Roberto de Souza]

Sink can support our PSR2 requirements but userspace can request
a resolution that PSR2 hardware do not support, in this case it
was overwritten the PSR2 sink support.
Adding another flag here, this way if requested resolution changed
to a value that PSR2 hardware can handle, PSR2 can be enabled.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c |  4 ++--
 drivers/gpu/drm/i915/i915_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_psr.c    | 33 +++++++++++++++++----------------
 3 files changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 7816cd53100a..16f9977995df 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2630,7 +2630,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 		   yesno(work_busy(&dev_priv->psr.work.work)));
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
 		else
 			enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
@@ -2678,7 +2678,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 
 		seq_printf(m, "Performance_Counter: %u\n", psrperf);
 	}
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		u32 psr2 = I915_READ(EDP_PSR2_STATUS);
 
 		seq_printf(m, "EDP_PSR2_STATUS: %x [%s]\n",
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 92cf6f4e9e00..46cae097201c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -602,11 +602,12 @@ struct i915_psr {
 	bool active;
 	struct delayed_work work;
 	unsigned busy_frontbuffer_bits;
-	bool psr2_support;
+	bool sink_psr2_support;
 	bool link_standby;
 	bool colorimetry_support;
 	bool alpm;
 	bool has_hw_tracking;
+	bool psr2_enabled;
 
 	void (*enable_source)(struct intel_dp *,
 			      const struct intel_crtc_state *);
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 84e1f8be5c48..5efddd920681 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -148,11 +148,12 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 		 * Y-coordinate requirement panels we would need to enable
 		 * GTC first.
 		 */
-		dev_priv->psr.psr2_support = intel_dp_get_y_coord_required(intel_dp);
-		DRM_DEBUG_KMS("PSR2 %s on sink",
-			      dev_priv->psr.psr2_support ? "supported" : "not supported");
+		dev_priv->psr.sink_psr2_support =
+				intel_dp_get_y_coord_required(intel_dp);
+		DRM_DEBUG_KMS("PSR2 %s on sink", dev_priv->psr.sink_psr2_support
+			      ? "supported" : "not supported");
 
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.sink_psr2_support) {
 			dev_priv->psr.colorimetry_support =
 				intel_dp_get_colorimetry_status(intel_dp);
 			dev_priv->psr.alpm =
@@ -193,7 +194,7 @@ static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 	struct edp_vsc_psr psr_vsc;
 
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
 		memset(&psr_vsc, 0, sizeof(psr_vsc));
 		psr_vsc.sdp_header.HB0 = 0;
@@ -265,7 +266,7 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
 	/* Enable ALPM at sink for psr2 */
-	if (dev_priv->psr.psr2_support && dev_priv->psr.alpm)
+	if (dev_priv->psr.psr2_enabled && dev_priv->psr.alpm)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				DP_RECEIVER_ALPM_CONFIG,
 				DP_ALPM_ENABLE);
@@ -424,7 +425,7 @@ static void hsw_psr_activate(struct intel_dp *intel_dp)
 	 */
 
 	/* psr1 and psr2 are mutually exclusive.*/
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		hsw_activate_psr2(intel_dp);
 	else
 		hsw_activate_psr1(intel_dp);
@@ -444,7 +445,7 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	 * dynamically during PSR enable, and extracted from sink
 	 * caps during eDP detection.
 	 */
-	if (!dev_priv->psr.psr2_support)
+	if (!dev_priv->psr.sink_psr2_support)
 		return false;
 
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
@@ -543,7 +544,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
 	else
 		WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
@@ -570,7 +571,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
 		hsw_psr_setup_aux(intel_dp);
 
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		u32 chicken = I915_READ(CHICKEN_TRANS(cpu_transcoder));
 
 		if (INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv))
@@ -629,7 +630,7 @@ void intel_psr_enable(struct intel_dp *intel_dp,
 		goto unlock;
 	}
 
-	dev_priv->psr.psr2_support = crtc_state->has_psr2;
+	dev_priv->psr.psr2_enabled = crtc_state->has_psr2;
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 
 	dev_priv->psr.setup_vsc(intel_dp, crtc_state);
@@ -699,7 +700,7 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 		i915_reg_t psr_status;
 		u32 psr_status_mask;
 
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			psr_status = EDP_PSR2_STATUS;
 			psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
 
@@ -723,7 +724,7 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 
 		dev_priv->psr.active = false;
 	} else {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
 		else
 			WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
@@ -783,7 +784,7 @@ static void intel_psr_work(struct work_struct *work)
 	 * and be ready for re-enable.
 	 */
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			if (intel_wait_for_register(dev_priv,
 						    EDP_PSR2_STATUS,
 						    EDP_PSR2_STATUS_STATE_MASK,
@@ -842,7 +843,7 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 		return;
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			val = I915_READ(EDP_PSR2_CTL);
 			WARN_ON(!(val & EDP_PSR2_ENABLE));
 			I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
@@ -1011,7 +1012,7 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
 
 	/* By definition flush = invalidate + flush */
 	if (frontbuffer_bits) {
-		if (dev_priv->psr.psr2_support ||
+		if (dev_priv->psr.psr2_enabled ||
 		    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 			intel_psr_exit(dev_priv);
 		} else {
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 07/10] drm/i915/psr: Use PSR2 macro for PSR2

[José Roberto de Souza]

Cosmetic change.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  | 3 ++-
 drivers/gpu/drm/i915/intel_psr.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1c6f463bc919..219a4da284aa 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4063,8 +4063,9 @@ enum {
 #define   EDP_PSR2_TP2_TIME_MASK	(3<<8)
 #define   EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4
 #define   EDP_PSR2_FRAME_BEFORE_SU_MASK	(0xf<<4)
-#define   EDP_PSR2_IDLE_MASK		0xf
 #define   EDP_PSR2_FRAME_BEFORE_SU(a)	((a)<<4)
+#define   EDP_PSR2_IDLE_FRAME_MASK	0xf
+#define   EDP_PSR2_IDLE_FRAME_SHIFT	0
 
 #define EDP_PSR2_STATUS			_MMIO(0x6f940)
 #define EDP_PSR2_STATUS_STATE_MASK     (0xf<<28)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 5efddd920681..bec455e28943 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -382,7 +382,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	uint32_t val;
 	uint8_t sink_latency;
 
-	val = idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
+	val = idle_frames << EDP_PSR2_IDLE_FRAME_SHIFT;
 
 	/* FIXME: selective update is probably totally broken because it doesn't
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
-- 
2.16.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 08/10] drm/i915/psr: Cache sink synchronization latency

[José Roberto de Souza]

This value do not change overtime so better cache it than
fetch it every PSR enable.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h  |  1 +
 drivers/gpu/drm/i915/intel_psr.c | 28 ++++++++++++++++------------
 2 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 46cae097201c..5373b171bb96 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -608,6 +608,7 @@ struct i915_psr {
 	bool alpm;
 	bool has_hw_tracking;
 	bool psr2_enabled;
+	u8 sink_sync_latency;
 
 	void (*enable_source)(struct intel_dp *,
 			      const struct intel_crtc_state *);
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index bec455e28943..d079cf0b034c 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -122,6 +122,18 @@ static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
 	return alpm_caps & DP_ALPM_CAP;
 }
 
+static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp)
+{
+	u8 val = 0;
+
+	if (drm_dp_dpcd_readb(&intel_dp->aux,
+			      DP_SYNCHRONIZATION_LATENCY_IN_SINK, &val) == 1)
+		val &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
+	else
+		DRM_ERROR("Unable to get sink synchronization latency\n");
+	return val;
+}
+
 void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv =
@@ -158,6 +170,8 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 				intel_dp_get_colorimetry_status(intel_dp);
 			dev_priv->psr.alpm =
 				intel_dp_get_alpm_status(intel_dp);
+			dev_priv->psr.sink_sync_latency =
+				intel_dp_get_sink_sync_latency(intel_dp);
 		}
 	}
 }
@@ -379,10 +393,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	 * with the 5 or 6 idle patterns.
 	 */
 	uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
-	uint32_t val;
-	uint8_t sink_latency;
-
-	val = idle_frames << EDP_PSR2_IDLE_FRAME_SHIFT;
+	u32 val = idle_frames << EDP_PSR2_IDLE_FRAME_SHIFT;
 
 	/* FIXME: selective update is probably totally broken because it doesn't
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
@@ -392,14 +403,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
 	}
 
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-				DP_SYNCHRONIZATION_LATENCY_IN_SINK,
-				&sink_latency) == 1) {
-		sink_latency &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
-	} else {
-		sink_latency = 0;
-	}
-	val |= EDP_PSR2_FRAME_BEFORE_SU(sink_latency + 1);
+	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv->psr.sink_sync_latency + 1);
 
 	if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
 		val |= EDP_PSR2_TP2_TIME_2500;
-- 
2.16.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 09/10] drm/i915/psr: Set DPCD PSR2 enable bit when needed

[José Roberto de Souza]

In the 2 eDP1.4a pannels tested set or not set bit have no effect
but is better set it and comply with specification.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
 drivers/gpu/drm/i915/intel_psr.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index d079cf0b034c..2d53f7398a6d 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -278,18 +278,19 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
+	u8 dpcd_val = DP_PSR_ENABLE;
 
 	/* Enable ALPM at sink for psr2 */
 	if (dev_priv->psr.psr2_enabled && dev_priv->psr.alpm)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				DP_RECEIVER_ALPM_CONFIG,
 				DP_ALPM_ENABLE);
+
+	if (dev_priv->psr.psr2_enabled)
+		dpcd_val |= DP_PSR_ENABLE_PSR2;
 	if (dev_priv->psr.link_standby)
-		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
-				   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
-	else
-		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
-				   DP_PSR_ENABLE);
+		dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
+	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
 
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
 }
-- 
2.16.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 10/10] drm/i915/debugfs: Print sink PSR status

[José Roberto de Souza]

IGT tests could be improved with sink status, knowing for sure that
hardware have activate or exit PSR.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 16f9977995df..91a8f70ffdd3 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2603,6 +2603,26 @@ static const char *psr2_live_status(u32 val)
 	return "unknown";
 }
 
+static const char *psr_sink_self_refresh_status(u8 val)
+{
+	static const char * const sink_status[] = {
+		"inactive",
+		"transitioning to active",
+		"active",
+		"active receiving selective update",
+		"transitioning to inactive",
+		"reserved",
+		"reserved",
+		"sink internal error"
+	};
+
+	val &= DP_PSR_SINK_STATE_MASK;
+	if (val < ARRAY_SIZE(sink_status))
+		return sink_status[val];
+
+	return "unknown";
+}
+
 static int i915_edp_psr_status(struct seq_file *m, void *data)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
@@ -2684,6 +2704,15 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 		seq_printf(m, "EDP_PSR2_STATUS: %x [%s]\n",
 			   psr2, psr2_live_status(psr2));
 	}
+
+	if (dev_priv->psr.enabled) {
+		struct drm_dp_aux *aux = &dev_priv->psr.enabled->aux;
+		u8 val;
+
+		if (drm_dp_dpcd_readb(aux, DP_PSR_STATUS, &val) == 1)
+			seq_printf(m, "Sink self refresh status: 0x%x [%s]\n",
+				   val, psr_sink_self_refresh_status(val));
+	}
 	mutex_unlock(&dev_priv->psr.lock);
 
 	intel_runtime_pm_put(dev_priv);
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx