From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: Xiong Zhou <xzhou@redhat.com>
Cc: eguan@redhat.com, linux-nvdimm@ml01.01.org, fstests@vger.kernel.org
Subject: Re: [PATCH v2 1/2] xfs: test per-inode DAX flag by IO
Date: Thu, 19 Jan 2017 13:49:25 -0700 [thread overview]
Message-ID: <20170119204925.GB28456@linux.intel.com> (raw)
In-Reply-To: <1484820838-5098-2-git-send-email-xzhou@redhat.com>
On Thu, Jan 19, 2017 at 06:13:57PM +0800, Xiong Zhou wrote:
> In a DAX mountpoint, do IO betwen files with and
> without DAX per-inode flag. We do mmap and O_DIRECT
> read/write IO in this case. Then test again in the
> same device without dax mountoption.
>
> Add help _require_scratch_dax to make sure we can
> test DAX feature on SCRATCH_DEV.
>
> Add mmap dio test programme to test read/write
> between a mmap area of one file and another file
> directly, with different size.
>
> Signed-off-by: Xiong Zhou <xzhou@redhat.com>
> ---
> .gitignore | 1 +
> common/rc | 14 +++++++
> src/Makefile | 2 +-
> src/t_mmap_dio.c | 81 ++++++++++++++++++++++++++++++++++++++++
> tests/xfs/138 | 110 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/138.out | 2 +
> tests/xfs/group | 1 +
> 7 files changed, 210 insertions(+), 1 deletion(-)
> create mode 100644 src/t_mmap_dio.c
> create mode 100755 tests/xfs/138
> create mode 100644 tests/xfs/138.out
>
> diff --git a/.gitignore b/.gitignore
> index 7dcea14..48a40a0 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -129,6 +129,7 @@
> /src/cloner
> /src/renameat2
> /src/t_rename_overwrite
> +/src/t_mmap_dio
>
> # dmapi/ binaries
> /dmapi/src/common/cmd/read_invis
> diff --git a/common/rc b/common/rc
> index 892c46e..3706620 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2632,6 +2632,20 @@ _require_scratch_shutdown()
> _scratch_unmount
> }
>
> +# Does dax mount option work on this dev/fs?
> +_require_scratch_dax()
> +{
> + _require_scratch
> + _scratch_mkfs > /dev/null 2>&1
> + _scratch_mount -o dax
> + # Check options to be sure. XFS ignores dax option
> + # and goes on if dev underneath does not support dax.
> + _fs_options $SCRATCH_DEV | grep -w "dax" > /dev/null 2>&1
> + [ $? -ne 0 ] && \
> + _notrun "$SCRATCH_DEV $FSTYP does not support -o dax"
> + _scratch_unmount
> +}
> +
> # Does norecovery support by this fs?
> _require_norecovery()
> {
> diff --git a/src/Makefile b/src/Makefile
> index 94d74aa..eb5a56c 100644
> --- a/src/Makefile
> +++ b/src/Makefile
> @@ -12,7 +12,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
> godown resvtest writemod makeextents itrash rename \
> multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
> t_mmap_writev t_truncate_cmtime dirhash_collide t_rename_overwrite \
> - holetest t_truncate_self
> + holetest t_truncate_self t_mmap_dio
>
> LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
> preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
> diff --git a/src/t_mmap_dio.c b/src/t_mmap_dio.c
> new file mode 100644
> index 0000000..1a26e1b
> --- /dev/null
> +++ b/src/t_mmap_dio.c
> @@ -0,0 +1,81 @@
> +/*
> + * This programme was originally written by
> + * Jeff Moyer <jmoyer@redhat.com>
> + */
> +#define _GNU_SOURCE 1
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <fcntl.h>
> +#include <sys/mman.h>
> +#include <libaio.h>
> +#include <errno.h>
> +#include <sys/time.h>
> +
> +void usage(char *prog)
> +{
> + fprintf(stderr,
> + "usage: %s <src file> <dest file> <size> <msg>\n",
> + prog);
> + exit(1);
> +}
> +
> +void err_exit(char *op, unsigned long len, char *s)
> +{
> + fprintf(stderr, "%s(%s) len %lu %s\n",
> + op, strerror(errno), len, s);
> + exit(1);
> +}
> +
> +int main(int argc, char **argv)
> +{
> + int fd, fd2, ret;
> + char *map;
> + unsigned long len;
> +
> + if (argc < 3)
> + usage(basename(argv[0]));
> +
> + len = strtoul(argv[3], NULL, 10);
> + if (errno == ERANGE)
> + err_exit("strtoul", 0, argv[4]);
> +
> + /* Open source file and mmap*/
> + fd = open(argv[1], O_RDWR, 0644);
> + if (fd < 0)
> + err_exit("open s", len, argv[4]);
> +
> + map = (char *)mmap(NULL, len,
> + PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
> + if (map == MAP_FAILED)
> + err_exit("mmap", len, argv[4]);
> +
> + /* Open dest file with O_DIRECT */
> + fd2 = open(argv[2], O_RDWR|O_DIRECT, 0644);
> + if (fd2 < 0)
> + err_exit("open d", len, argv[4]);
> +
> + /* First, test storing to dest file from source mapping */
> + ret = write(fd2, map, len);
> + if (ret != len)
> + err_exit("write", len, argv[4]);
> +
> + ret = (int)lseek(fd2, 0, SEEK_SET);
> + if (ret == -1)
> + err_exit("lseek", len, argv[4]);
> +
> + /* Next, test reading from dest file into source mapping */
> + ret = read(fd2, map, len);
> + if (ret != len)
> + err_exit("read", len, argv[4]);
> + ret = msync(map, len, MS_SYNC);
> + if (ret < 0)
> + err_exit("msync", len, argv[4]);
> +
> + ret = munmap(map, len);
> + if (ret < 0)
> + err_exit("munmap", len, argv[4]);
Small nit: you munmap() to clean up the mmap(), but you don't close fd or fd2.
next prev parent reply other threads:[~2017-01-19 20:52 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-18 3:07 [PATCH 0/4] mmap dio and DAX Xiong Zhou
2017-01-18 3:07 ` [PATCH 1/4] common/rc: add _require_scratch_dax Xiong Zhou
2017-01-19 4:17 ` Eryu Guan
2017-01-18 3:07 ` [PATCH 2/4] src/t_mmap_dio: add mmap dio test Xiong Zhou
2017-01-18 3:07 ` [PATCH 3/4] xfs: test per-inode DAX flag by IO Xiong Zhou
2017-01-19 4:24 ` Eryu Guan
2017-01-18 3:07 ` [PATCH 4/4] generic: test mmap dio through DAX and non-DAX Xiong Zhou
2017-01-19 5:54 ` Eryu Guan
2017-01-19 10:13 ` [PATCH v2 0/2] mmap dio and DAX Xiong Zhou
2017-01-19 10:13 ` [PATCH v2 1/2] xfs: test per-inode DAX flag by IO Xiong Zhou
2017-01-19 20:49 ` Ross Zwisler [this message]
2017-01-20 1:15 ` Xiong Zhou
2017-01-20 2:21 ` [PATCH v3] " Xiong Zhou
2017-01-20 6:15 ` [PATCH v4 0/2] mmap dio and DAX Xiong Zhou
2017-01-20 6:15 ` [PATCH v4 1/2] xfs: test per-inode DAX flag by IO Xiong Zhou
2017-02-04 15:17 ` [PATCH] fixup! " Ross Zwisler
2017-02-05 6:21 ` [PATCH v5 0/2] mmap dio and DAX Xiong Zhou
2017-02-05 6:21 ` [PATCH v5 1/2] xfs: test per-inode DAX flag by IO Xiong Zhou
2017-02-06 19:13 ` Ross Zwisler
2017-02-05 6:21 ` [PATCH v5 2/2] generic: test mmap io through DAX and non-DAX Xiong Zhou
2017-02-06 19:17 ` Ross Zwisler
2017-02-08 4:11 ` [PATCH v6 0/2] mmap dio and DAX Xiong Zhou
2017-02-08 4:11 ` [PATCH v6 1/2] xfs: test per-inode DAX flag by IO Xiong Zhou
2017-02-08 4:11 ` [PATCH v6 2/2] generic: test mmap io through DAX and non-DAX Xiong Zhou
2017-02-17 6:46 ` Eryu Guan
2017-02-17 6:52 ` Xiong Zhou
2017-01-20 6:15 ` [PATCH v4 " Xiong Zhou
2017-01-24 22:28 ` [PATCH v4 0/2] mmap dio and DAX Ross Zwisler
2017-02-03 5:57 ` Xiong Zhou
2017-02-03 6:29 ` Eryu Guan
2017-02-03 16:57 ` Ross Zwisler
2017-02-04 10:14 ` Xiong Zhou
2017-01-19 10:13 ` [PATCH v2 2/2] generic: test mmap dio through DAX and non-DAX Xiong Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170119204925.GB28456@linux.intel.com \
--to=ross.zwisler@linux.intel.com \
--cc=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=linux-nvdimm@ml01.01.org \
--cc=xzhou@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox