From: Ben Widawsky <ben@bwidawsk.net>
To: intel-gfx@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Subject: [PATCH v2 3/3] tests: rc6 residency test
Date: Sun, 25 Mar 2012 17:33:32 -0700 [thread overview]
Message-ID: <1332722012-4853-6-git-send-email-ben@bwidawsk.net> (raw)
In-Reply-To: <1332722012-4853-1-git-send-email-ben@bwidawsk.net>
This is meant to test the sysfs entry for showing rc6 residency in
milliseconds. Remember, sysfs is a permanent interface.
v2: use new get_card interface to try "all" devices
check rc6p and rc6pp in addition to rc6
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
---
lib/drmtest.h | 1 +
tests/Makefile.am | 1 +
tests/rc6_residency.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 93 insertions(+)
create mode 100644 tests/rc6_residency.c
diff --git a/lib/drmtest.h b/lib/drmtest.h
index 96fbf1a..42f238c 100644
--- a/lib/drmtest.h
+++ b/lib/drmtest.h
@@ -35,6 +35,7 @@
#include "xf86drm.h"
#include "intel_batchbuffer.h"
+int drm_get_card(int master);
int drm_open_any(void);
int drm_open_any_master(void);
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 6544ec7..a8eed88 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -56,6 +56,7 @@ TESTS_progs = \
drm_vma_limiter_cpu \
drm_vma_limiter_gtt \
drm_vma_limiter_cached \
+ rc6_residency \
$(NULL)
# IMPORTANT: The ZZ_ tests need to be run last!
diff --git a/tests/rc6_residency.c b/tests/rc6_residency.c
new file mode 100644
index 0000000..5c2e442
--- /dev/null
+++ b/tests/rc6_residency.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright © 2012 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Ben Widawsky <ben@bwidawsk.net>
+ *
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include "drmtest.h"
+
+static unsigned int readit(const char *path)
+{
+ unsigned int ret;
+
+ FILE *file;
+ file = fopen(path, "r");
+ if (file == NULL) {
+ fprintf(stderr, "Couldn't open %s (%d)\n", path, errno);
+ abort();
+ }
+ fscanf(file, "%u", &ret);
+ fclose(file);
+
+ return ret;
+}
+
+int main(int argc, char *argv[])
+{
+ const int device = drm_get_card(0);
+ char *path, *pathp, *pathpp;
+ int fd, ret;
+ unsigned int value1, value1p, value1pp, value2, value2p, value2pp;
+ int diff;
+
+ /* Use drm_open_any to verify device existence */
+ fd = drm_open_any();
+ close(fd);
+
+ ret = asprintf(&path, "/sys/class/drm/card%d/power/rc6", device);
+ assert(ret != -1);
+ ret = asprintf(&pathp, "/sys/class/drm/card%d/power/rc6p", device);
+ assert(ret != -1);
+ ret = asprintf(&pathpp, "/sys/class/drm/card%d/power/rc6pp", device);
+ assert(ret != -1);
+
+ value1 = readit(path);
+ value1p = readit(pathp);
+ value1pp = readit(pathpp);
+ // Sleep for 3 seconds and compare
+ sleep(3);
+ value2 = readit(path);
+ value2p = readit(pathp);
+ value2pp = readit(pathpp);
+
+ diff = (value2pp - value1pp) +
+ (value2p - value1p) +
+ (value2 - value1);
+
+ /* Plenty of fudge */
+ if (diff > 3900 || diff < 2100) {
+ printf("%d\n", diff);
+ exit(EXIT_FAILURE);
+ }
+
+ free(path);
+ exit(EXIT_SUCCESS);
+}
--
1.7.9.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2012-03-26 0:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-26 0:33 [PATCH v2 1/3] drm/i915: add rc6 residency times to debugfs Ben Widawsky
2012-03-26 0:33 ` [PATCH 2/3] drm/i915: extract intel_enable_rc6() Ben Widawsky
2012-03-26 9:32 ` Daniel Vetter
2012-03-26 0:33 ` [PATCH v2 3/3] drm/i915: rc6 in sysfs Ben Widawsky
2012-03-26 0:33 ` [PATCH 1/3] build: make sure we have asprintf Ben Widawsky
2012-03-26 0:33 ` [PATCH 2/3] drm/i915: extract card getting Ben Widawsky
2012-03-26 9:33 ` Daniel Vetter
2012-03-26 0:33 ` Ben Widawsky [this message]
2012-03-26 9:37 ` [PATCH v2 3/3] tests: rc6 residency test Daniel Vetter
2012-03-26 9:40 ` Daniel Vetter
2012-03-26 21:54 ` Ben Widawsky
2012-03-27 7:22 ` Daniel Vetter
2012-03-27 8:34 ` Daniel Vetter
2012-03-26 9:34 ` [PATCH v2 1/3] drm/i915: add rc6 residency times to debugfs Daniel Vetter
2012-03-26 12:33 ` Eugeni Dodonov
2012-03-26 16:49 ` Ben Widawsky
2012-03-26 22:34 ` Ben Widawsky
2012-03-26 23:04 ` Eugeni Dodonov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332722012-4853-6-git-send-email-ben@bwidawsk.net \
--to=ben@bwidawsk.net \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox