From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 06/14] drm/i915: convert PIPE_MSA_MISC to transcoder
Date: Thu, 18 Oct 2012 18:21:36 -0300 [thread overview]
Message-ID: <1350595304-18237-7-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1350595304-18237-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Same as the other registers. This one also appeared on Haswell for the
first time, so that's why we are renaming it.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 19 ++++++++++---------
drivers/gpu/drm/i915/intel_ddi.c | 18 +++++++++---------
2 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9fecd3b..9eab732 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4552,15 +4552,16 @@
#define TRANS_CLK_SEL_DISABLED (0x0<<29)
#define TRANS_CLK_SEL_PORT(x) ((x+1)<<29)
-#define _PIPEA_MSA_MISC 0x60410
-#define _PIPEB_MSA_MISC 0x61410
-#define PIPE_MSA_MISC(pipe) _PIPE(pipe, _PIPEA_MSA_MISC, _PIPEB_MSA_MISC)
-#define PIPE_MSA_SYNC_CLK (1<<0)
-#define PIPE_MSA_6_BPC (0<<5)
-#define PIPE_MSA_8_BPC (1<<5)
-#define PIPE_MSA_10_BPC (2<<5)
-#define PIPE_MSA_12_BPC (3<<5)
-#define PIPE_MSA_16_BPC (4<<5)
+#define _TRANSA_MSA_MISC 0x60410
+#define _TRANSB_MSA_MISC 0x61410
+#define TRANS_MSA_MISC(tran) _TRANSCODER(tran, _TRANSA_MSA_MISC, \
+ _TRANSB_MSA_MISC)
+#define TRANS_MSA_SYNC_CLK (1<<0)
+#define TRANS_MSA_6_BPC (0<<5)
+#define TRANS_MSA_8_BPC (1<<5)
+#define TRANS_MSA_10_BPC (2<<5)
+#define TRANS_MSA_12_BPC (3<<5)
+#define TRANS_MSA_16_BPC (4<<5)
/* LCPLL Control */
#define LCPLL_CTL 0x130040
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 8d3ce3a..c30cb14 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -888,32 +888,32 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
- enum pipe pipe = intel_crtc->pipe;
+ enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
int type = intel_encoder->type;
uint32_t temp;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
- temp = PIPE_MSA_SYNC_CLK;
+ temp = TRANS_MSA_SYNC_CLK;
switch (intel_crtc->bpp) {
case 18:
- temp |= PIPE_MSA_6_BPC;
+ temp |= TRANS_MSA_6_BPC;
break;
case 24:
- temp |= PIPE_MSA_8_BPC;
+ temp |= TRANS_MSA_8_BPC;
break;
case 30:
- temp |= PIPE_MSA_10_BPC;
+ temp |= TRANS_MSA_10_BPC;
break;
case 36:
- temp |= PIPE_MSA_12_BPC;
+ temp |= TRANS_MSA_12_BPC;
break;
default:
- temp |= PIPE_MSA_8_BPC;
- WARN(1, "%d bpp unsupported by pipe DDI function\n",
+ temp |= TRANS_MSA_8_BPC;
+ WARN(1, "%d bpp unsupported by DDI function\n",
intel_crtc->bpp);
}
- I915_WRITE(PIPE_MSA_MISC(pipe), temp);
+ I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
}
}
--
1.7.11.4
next prev parent reply other threads:[~2012-10-18 21:22 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 21:21 [PATCH 00/14] Haswell eDP enablement Paulo Zanoni
2012-10-18 21:21 ` [PATCH 01/14] drm/i915: add TRANSCODER_EDP Paulo Zanoni
2012-10-18 22:00 ` Daniel Vetter
2012-10-18 21:21 ` [PATCH 02/14] drm/i915: convert PIPE_CLK_SEL to transcoder Paulo Zanoni
2012-10-18 21:21 ` [PATCH 03/14] drm/i915: convert DDI_FUNC_CTL " Paulo Zanoni
2012-10-18 21:21 ` [PATCH 04/14] drm/i915: check TRANSCODER_EDP on intel_modeset_setup_hw_state Paulo Zanoni
2012-10-18 22:02 ` Daniel Vetter
2012-10-19 19:30 ` Paulo Zanoni
2012-10-18 21:21 ` [PATCH 05/14] drm/i915: convert PIPECONF to use transcoder instead of pipe Paulo Zanoni
2012-10-18 22:23 ` Daniel Vetter
2012-10-19 18:36 ` Paulo Zanoni
2012-10-18 21:21 ` Paulo Zanoni [this message]
2012-10-18 21:21 ` [PATCH 07/14] drm/i915: convert CPU M/N timings to transcoder Paulo Zanoni
2012-10-18 22:25 ` Daniel Vetter
2012-10-18 21:21 ` [PATCH 08/14] drm/i915: convert pipe timing definitions " Paulo Zanoni
2012-10-18 22:29 ` Daniel Vetter
2012-10-18 21:21 ` [PATCH 09/14] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP Paulo Zanoni
2012-10-18 21:21 ` [PATCH 10/14] drm/i915: select the correct pipe " Paulo Zanoni
2012-10-18 21:21 ` [PATCH 11/14] drm/i915: set the correct eDP aux channel clock divider on DDI Paulo Zanoni
2012-10-18 21:21 ` [PATCH 12/14] drm/i915: set/unset the DDI eDP backlight Paulo Zanoni
2012-10-18 21:21 ` [PATCH 13/14] drm/i915: turn the eDP DDI panel on/off Paulo Zanoni
2012-10-18 21:21 ` [PATCH 14/14] drm/i915: enable DDI eDP Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350595304-18237-7-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox