From: Ben Widawsky <ben@bwidawsk.net>
To: intel-gfx@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Subject: [PATCH 13/18] drm/i915: consolidate interrupt naming scheme
Date: Tue, 6 Nov 2012 16:25:37 +0000 [thread overview]
Message-ID: <1352219142-1395-14-git-send-email-ben@bwidawsk.net> (raw)
In-Reply-To: <1352219142-1395-1-git-send-email-ben@bwidawsk.net>
The motivation here is we're going to add some new interrupt definitions
and handling outside of the GT interrupts which is all we've managed so
far (with some RPS exceptions). By consolidating the names in the future
we can make thing a bit cleaner as we don't need to define register
names twice, and we can leverage pretty decent overlap in HW registers
since ILK.
To explain briefly what is in the comments: there are two sets of
interrupt masking/enabling registers. At least so far, the definitions
of the two sets overlap. The old code setup distinct names for
interrupts in each set, ie. one for global, and one for ring. This made
things confusing when using the wrong defines in the wrong places.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
---
drivers/gpu/drm/i915/i915_irq.c | 58 +++++++++---------
drivers/gpu/drm/i915/i915_reg.h | 101 ++++++++++++++------------------
drivers/gpu/drm/i915/intel_ringbuffer.c | 17 +++---
3 files changed, 79 insertions(+), 97 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4ac4522..d3838c6 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -438,7 +438,7 @@ static void ivybridge_parity_work(struct work_struct *work)
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
spin_lock_irqsave(&dev_priv->irq_lock, flags);
- dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ dev_priv->gt_irq_mask &= ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
@@ -470,7 +470,7 @@ static void ivybridge_handle_parity_error(struct drm_device *dev)
return;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
- dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ dev_priv->gt_irq_mask |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
@@ -482,22 +482,21 @@ static void snb_gt_irq_handler(struct drm_device *dev,
u32 gt_iir)
{
- if (gt_iir & (GEN6_RENDER_USER_INTERRUPT |
- GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT))
+ if (gt_iir & (GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
- if (gt_iir & GEN6_BSD_USER_INTERRUPT)
+ if (gt_iir & GT_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
- if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
+ if (gt_iir & GT_BLT_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
- if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
- GT_GEN6_BSD_CS_ERROR_INTERRUPT |
- GT_RENDER_CS_ERROR_INTERRUPT)) {
+ if (gt_iir & (GT_BLT_CS_ERROR_INTERRUPT |
+ GT_BSD_CS_ERROR_INTERRUPT |
+ GT_RENDER_MASTER_ERROR_INTERRUPT)) {
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
i915_handle_error(dev, false);
}
- if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT)
+ if (gt_iir & GT_RENDER_L3_PARITY_ERROR_INTERRUPT)
ivybridge_handle_parity_error(dev);
}
@@ -776,9 +775,9 @@ static void ilk_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
{
- if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
+ if (gt_iir & (GT_RENDER_USER_INTERRUPT | GT_RENDER_PIPECTL_NOTIFY_INTERRUPT))
notify_ring(dev, &dev_priv->ring[RCS]);
- if (gt_iir & GT_BSD_USER_INTERRUPT)
+ if (gt_iir & ILK_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
}
@@ -1898,7 +1897,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
- u32 render_irqs;
+ u32 gt_irqs;
u32 hotplug_mask;
dev_priv->irq_mask = ~display_mask;
@@ -1914,17 +1913,14 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ gt_irqs = GT_RENDER_USER_INTERRUPT;
+
if (IS_GEN6(dev))
- render_irqs =
- GT_USER_INTERRUPT |
- GEN6_BSD_USER_INTERRUPT |
- GEN6_BLITTER_USER_INTERRUPT;
+ gt_irqs |= GT_BLT_USER_INTERRUPT | GT_BSD_USER_INTERRUPT;
else
- render_irqs =
- GT_USER_INTERRUPT |
- GT_PIPE_NOTIFY |
- GT_BSD_USER_INTERRUPT;
- I915_WRITE(GTIER, render_irqs);
+ gt_irqs |= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT | ILK_BSD_USER_INTERRUPT;
+
+ I915_WRITE(GTIER, gt_irqs);
POSTING_READ(GTIER);
if (HAS_PCH_CPT(dev)) {
@@ -1968,7 +1964,7 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
DE_PLANEC_FLIP_DONE_IVB |
DE_PLANEB_FLIP_DONE_IVB |
DE_PLANEA_FLIP_DONE_IVB;
- u32 render_irqs;
+ u32 gt_irqs;
u32 hotplug_mask;
dev_priv->irq_mask = ~display_mask;
@@ -1983,14 +1979,14 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
DE_PIPEA_VBLANK_IVB);
POSTING_READ(DEIER);
- dev_priv->gt_irq_mask = ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ dev_priv->gt_irq_mask = ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
- GEN6_BLITTER_USER_INTERRUPT | GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
- I915_WRITE(GTIER, render_irqs);
+ gt_irqs = GT_RENDER_USER_INTERRUPT | GT_BSD_USER_INTERRUPT |
+ GT_BLT_USER_INTERRUPT | GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
+ I915_WRITE(GTIER, gt_irqs);
POSTING_READ(GTIER);
hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
@@ -2012,10 +2008,10 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
static int valleyview_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 gt_irqs;
u32 enable_mask;
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
- u32 render_irqs;
u16 msid;
enable_mask = I915_DISPLAY_PORT_INTERRUPT;
@@ -2058,9 +2054,9 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
- GEN6_BLITTER_USER_INTERRUPT;
- I915_WRITE(GTIER, render_irqs);
+ gt_irqs = GT_RENDER_USER_INTERRUPT | GT_BSD_USER_INTERRUPT |
+ GT_BLT_USER_INTERRUPT;
+ I915_WRITE(GTIER, gt_irqs);
POSTING_READ(GTIER);
/* ack & enable invalid PTE error interrupts */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 70f9ad7..b83928d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -574,24 +574,6 @@
#define VLV_IIR 0x1820a4
#define VLV_IMR 0x1820a8
#define VLV_ISR 0x1820ac
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
-#define I915_HWB_OOM_INTERRUPT (1<<13)
-#define I915_SYNC_STATUS_INTERRUPT (1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
-#define I915_DEBUG_INTERRUPT (1<<2)
-#define I915_USER_INTERRUPT (1<<1)
-#define I915_ASLE_INTERRUPT (1<<0)
-#define I915_BSD_USER_INTERRUPT (1<<25)
#define EIR 0x020b0
#define EMR 0x020b4
#define ESR 0x020b8
@@ -702,28 +684,6 @@
#define CACHE_MODE_1 0x7004 /* IVB+ */
#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
-/* GEN6 interrupt control
- * Note that the per-ring interrupt bits do alias with the global interrupt bits
- * in GTIMR. */
-#define GEN6_RENDER_HWSTAM 0x2098
-#define GEN6_RENDER_IMR 0x20a8
-#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
-#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
-#define GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED (1 << 6)
-#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
-#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
-#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
-#define GEN6_RENDER_SYNC_STATUS (1 << 2)
-#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
-#define GEN6_RENDER_USER_INTERRUPT (1 << 0)
-
-#define GEN6_BLITTER_HWSTAM 0x22098
-#define GEN6_BLITTER_IMR 0x220a8
-#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
-#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
-#define GEN6_BLITTER_SYNC_STATUS (1 << 24)
-#define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
-
#define GEN6_BLITTER_ECOSKPD 0x221d0
#define GEN6_BLITTER_LOCK_SHIFT 16
#define GEN6_BLITTER_FBC_NOTIFY (1<<3)
@@ -734,9 +694,49 @@
#define GEN6_BSD_SLEEP_INDICATOR (1 << 3)
#define GEN6_BSD_GO_INDICATOR (1 << 4)
-#define GEN6_BSD_HWSTAM 0x12098
-#define GEN6_BSD_IMR 0x120a8
-#define GEN6_BSD_USER_INTERRUPT (1 << 12)
+/* On modern GEN architectures interrupt control consists of two sets
+ * of registers. The first set pertains to the ring generating the
+ * interrupt. The second control is for the functional block generating the
+ * interrupt. These are PM, GT, DE, etc.
+ *
+ * Luckily *knocks on wood* all the ring interrupt bits match up with the
+ * GT interrupt bits, so we don't need to duplicate the defines.
+ *
+ * These defines should cover us well from SNB->HSW with minor exceptions
+ * it can also work on ILK.
+ */
+#define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
+#define GT_BLT_CS_ERROR_INTERRUPT (1 << 25)
+#define GT_BLT_USER_INTERRUPT (1 << 22)
+#define GT_BSD_CS_ERROR_INTERRUPT (1 << 15)
+#define GT_BSD_USER_INTERRUPT (1 << 12)
+#define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */
+#define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4)
+#define GT_RENDER_MASTER_ERROR_INTERRUPT (1 << 3)
+#define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2)
+#define GT_RENDER_DEBUG_INTERRUPT (1 << 1)
+#define GT_RENDER_USER_INTERRUPT (1 << 0)
+
+/* These are all the "old" interrupts */
+#define ILK_BSD_USER_INTERRUPT (1<<5)
+#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
+#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
+#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
+#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
+#define I915_HWB_OOM_INTERRUPT (1<<13)
+#define I915_SYNC_STATUS_INTERRUPT (1<<12)
+#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
+#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
+#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
+#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
+#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
+#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
+#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
+#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
+#define I915_DEBUG_INTERRUPT (1<<2)
+#define I915_USER_INTERRUPT (1<<1)
+#define I915_ASLE_INTERRUPT (1<<0)
+#define I915_BSD_USER_INTERRUPT (1 << 25)
#define GEN6_BSD_RNCID 0x12198
@@ -3431,21 +3431,6 @@
#define DEIIR 0x44008
#define DEIER 0x4400c
-/* GT interrupt.
- * Note that for gen6+ the ring-specific interrupt bits do alias with the
- * corresponding bits in the per-ring interrupt control registers. */
-#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
-#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
-#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
-#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
-#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
-#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
-#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
-#define GT_PIPE_NOTIFY (1 << 4)
-#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
-#define GT_SYNC_STATUS (1 << 2)
-#define GT_USER_INTERRUPT (1 << 0)
-
#define GTISR 0x44010
#define GTIMR 0x44014
#define GTIIR 0x44018
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 9cfe633..33b176a 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -540,7 +540,7 @@ static int init_render_ring(struct intel_ring_buffer *ring)
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
if (HAS_L3_GPU_CACHE(dev))
- I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
+ I915_WRITE_IMR(ring, ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT);
return ret;
}
@@ -936,7 +936,7 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring)
if (ring->irq_refcount.gt++ == 0) {
if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
I915_WRITE_IMR(ring, ~(ring->irq_enable_mask |
- GEN6_RENDER_L3_PARITY_ERROR));
+ GT_RENDER_L3_PARITY_ERROR_INTERRUPT));
else
I915_WRITE_IMR(ring, ~ring->irq_enable_mask);
dev_priv->gt_irq_mask &= ~ring->irq_enable_mask;
@@ -958,7 +958,7 @@ gen6_ring_put_irq(struct intel_ring_buffer *ring)
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (--ring->irq_refcount.gt == 0) {
if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
- I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
+ I915_WRITE_IMR(ring, ~GT_RENDER_L3_PARITY_ERROR_INTERRUPT);
else
I915_WRITE_IMR(ring, ~0);
dev_priv->gt_irq_mask |= ring->irq_enable_mask;
@@ -1507,7 +1507,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
ring->flush = gen6_render_ring_flush;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
- ring->irq_enable_mask = GT_USER_INTERRUPT;
+ ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
ring->get_seqno = gen6_ring_get_seqno;
ring->sync_to = gen6_ring_sync;
ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_INVALID;
@@ -1524,7 +1524,8 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
ring->get_seqno = pc_render_get_seqno;
ring->irq_get = gen5_ring_get_irq;
ring->irq_put = gen5_ring_put_irq;
- ring->irq_enable_mask = GT_USER_INTERRUPT | GT_PIPE_NOTIFY;
+ ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT |
+ GT_RENDER_PIPECTL_NOTIFY_INTERRUPT;
} else {
ring->add_request = i9xx_add_request;
if (INTEL_INFO(dev)->gen < 4)
@@ -1644,7 +1645,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
ring->flush = gen6_bsd_ring_flush;
ring->add_request = gen6_add_request;
ring->get_seqno = gen6_ring_get_seqno;
- ring->irq_enable_mask = GEN6_BSD_USER_INTERRUPT;
+ ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
@@ -1663,7 +1664,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
ring->add_request = i9xx_add_request;
ring->get_seqno = ring_get_seqno;
if (IS_GEN5(dev)) {
- ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
+ ring->irq_enable_mask = ILK_BSD_USER_INTERRUPT;
ring->irq_get = gen5_ring_get_irq;
ring->irq_put = gen5_ring_put_irq;
} else {
@@ -1692,7 +1693,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
ring->flush = gen6_ring_flush;
ring->add_request = gen6_add_request;
ring->get_seqno = gen6_ring_get_seqno;
- ring->irq_enable_mask = GEN6_BLITTER_USER_INTERRUPT;
+ ring->irq_enable_mask = GT_BLT_USER_INTERRUPT;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
--
1.8.0
next prev parent reply other threads:[~2012-11-06 16:26 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-06 16:25 [PATCH 00/18] [RFC] Introduce the Haswell VECS Ben Widawsky
2012-11-06 16:25 ` [PATCH 01/18] drm/i915: Comments for semaphore clarification Ben Widawsky
2012-11-07 13:30 ` Jani Nikula
2012-11-06 16:25 ` [PATCH 02/18] drm/i915: Semaphore MBOX update generalization Ben Widawsky
2012-11-07 14:00 ` Jani Nikula
2012-11-06 16:25 ` [PATCH 03/18] drm/i915: Introduce VECS: the 4th ring Ben Widawsky
2012-11-06 16:25 ` [PATCH 04/18] drm/i915: Add VECS semaphore bits Ben Widawsky
2012-11-06 16:25 ` [PATCH 05/18] drm/i915: Rename ring flush functions Ben Widawsky
2012-11-07 14:47 ` Jani Nikula
2012-11-06 16:25 ` [PATCH 06/18] drm/i915: add HAS_VEBOX Ben Widawsky
2012-11-07 14:59 ` Jani Nikula
2012-11-06 16:25 ` [PATCH 07/18] drm/i915: Vebox ringbuffer init Ben Widawsky
2012-11-06 16:25 ` [PATCH 08/18] drm/i915: Create a more generic pm handler for hsw+ Ben Widawsky
2012-11-06 16:25 ` [PATCH 09/18] drm/i915: make PM interrupt writes non-destructive Ben Widawsky
2012-11-07 10:17 ` Chris Wilson
2012-11-07 11:53 ` Ben Widawsky
2012-11-12 19:11 ` [PATCH 09/18 v3] " Ben Widawsky
2012-11-12 19:39 ` [PATCH 09/18 v4] " Ben Widawsky
2012-11-06 16:25 ` [PATCH 10/18] drm/i915: Create an ivybridge_irq_preinstall Ben Widawsky
2012-11-06 16:25 ` [PATCH 11/18] drm/i915: Add PM regs to pre install Ben Widawsky
2012-11-06 16:25 ` [PATCH 12/18] drm/i915: Convert irq_refounct to struct Ben Widawsky
2012-11-06 16:25 ` Ben Widawsky [this message]
2012-11-06 16:25 ` [PATCH 14/18] drm/i915: vebox interrupt get/put Ben Widawsky
2013-02-13 19:28 ` Daniel Vetter
2012-11-06 16:25 ` [PATCH 15/18] drm/i915: Enable vebox interrupts Ben Widawsky
2012-11-06 16:25 ` [PATCH 16/18] drm/i915: add VEBOX into debugfs Ben Widawsky
2012-11-06 16:25 ` [PATCH 17/18] drm/i915: add I915_EXEC_VEBOX to i915_gem_do_execbuffer() Ben Widawsky
2012-11-06 16:25 ` [PATCH 18/18] drm/i915: add I915_PARAM_HAS_VEBOX to i915_getparam Ben Widawsky
2012-11-07 12:03 ` [PATCH 00/18] [RFC] Introduce the Haswell VECS Ben Widawsky
-- strict thread matches above, loose matches on Subject: below --
2013-04-28 0:59 [PATCH 00/18] " Ben Widawsky
2013-04-28 0:59 ` [PATCH 13/18] drm/i915: consolidate interrupt naming scheme Ben Widawsky
2013-05-28 14:01 ` Damien Lespiau
2013-05-28 18:50 ` Ben Widawsky
2013-05-29 15:51 ` Damien Lespiau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352219142-1395-14-git-send-email-ben@bwidawsk.net \
--to=ben@bwidawsk.net \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox