[PATCH 02/15] drm/i915: change how VLV_IIR is reset

[Paulo Zanoni <przanoni@gmail.com>]

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

In the current code VLV_IIR is reset before VLV_IER and VLV_IMR. This
looks wrong because after we reset VLV_IIR and before we clear IMR/IER
we can still get more interrupts, so when we finally disable IMR and
IER, there's no guaranteee that IIR will be clean. So in this patch we
use intel_irq_reg_reset which is the function that is used by
everybody else and should be correct.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 351e30a..292337b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2060,8 +2060,7 @@ static void valleyview_irq_preinstall(struct drm_device *dev)
 	I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 	for_each_pipe(pipe)
 		I915_WRITE(PIPESTAT(pipe), 0xffff);
-	I915_WRITE(VLV_IIR, 0xffffffff);
-	INTEL_IRQ_REG_RESET(VLV_I, false);
+	INTEL_IRQ_REG_RESET(VLV_I, true);
 }
 
 static void ibx_hpd_irq_setup(struct drm_device *dev)
@@ -2283,8 +2282,7 @@ static void valleyview_irq_uninstall(struct drm_device *dev)
 	I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 	for_each_pipe(pipe)
 		I915_WRITE(PIPESTAT(pipe), 0xffff);
-	I915_WRITE(VLV_IIR, 0xffffffff);
-	INTEL_IRQ_REG_RESET(VLV_I, false);
+	INTEL_IRQ_REG_RESET(VLV_I, true);
 }
 
 static void ironlake_irq_uninstall(struct drm_device *dev)
-- 
1.8.1.2