[PATCH 4/4] drm/i915: Move the C3 LP write bit setup to gen3_init_clock_gating() for KMS

[ville.syrjala@linux.intel.com]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Move the MI_ARB_STATE MI_ARB_C3_LP_WRITE_ENABLE setup to
gen3_init_clock_gating() from i915_gem_load() when KMS is enabled. Leave
it in i915_gem_load() for the UMS case, but add an explcit check, just
to make it easier to spot it when we eventually rip out UMS support.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_gem.c | 2 +-
 drivers/gpu/drm/i915/intel_pm.c | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 3618bb0..0b1a360 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4598,7 +4598,7 @@ i915_gem_load(struct drm_device *dev)
 	init_waitqueue_head(&dev_priv->gpu_error.reset_queue);
 
 	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
-	if (IS_GEN3(dev)) {
+	if (!drm_core_check_feature(dev, DRIVER_MODESET) && IS_GEN3(dev)) {
 		I915_WRITE(MI_ARB_STATE,
 			   _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
 	}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index b6ab781..a01dfff 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5123,6 +5123,9 @@ static void gen3_init_clock_gating(struct drm_device *dev)
 
 	/* interrupts should cause a wake up from C3 */
 	I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN));
+
+	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+	I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
 }
 
 static void i85x_init_clock_gating(struct drm_device *dev)
-- 
1.8.3.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx