From: naresh.kumar.kachhi@intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 2/3] drm/i915: wait for rings to become idle once disabled
Date: Wed, 12 Mar 2014 16:39:41 +0530 [thread overview]
Message-ID: <1394622582-21762-3-git-send-email-naresh.kumar.kachhi@intel.com> (raw)
In-Reply-To: <1394622582-21762-1-git-send-email-naresh.kumar.kachhi@intel.com>
From: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
make sure we wait for rings to become idle once they are
disabled. In case of timeout print an error message
Signed-off-by: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 2 ++
drivers/gpu/drm/i915/intel_ringbuffer.c | 6 ++++++
drivers/gpu/drm/i915/intel_ringbuffer.h | 2 ++
3 files changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 146609a..6174fda 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -748,6 +748,7 @@ enum punit_power_well {
#define RING_INSTPS(base) ((base)+0x70)
#define RING_DMA_FADD(base) ((base)+0x78)
#define RING_INSTPM(base) ((base)+0xc0)
+#define RING_MI_MODE(base) ((base)+0x9c)
#define INSTPS 0x02070 /* 965+ only */
#define INSTDONE1 0x0207c /* 965+ only */
#define ACTHD_I965 0x02074
@@ -824,6 +825,7 @@ enum punit_power_well {
# define VS_TIMER_DISPATCH (1 << 6)
# define MI_FLUSH_ENABLE (1 << 12)
# define ASYNC_FLIP_PERF_DISABLE (1 << 14)
+# define MODE_IDLE (1 << 9)
#define GEN6_GT_MODE 0x20d0
#define GEN7_GT_MODE 0x7008
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 42b4001..4da2211 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -445,6 +445,11 @@ static int init_ring_common(struct intel_ring_buffer *ring)
I915_WRITE_HEAD(ring, 0);
ring->write_tail(ring, 0);
+ /* Wait for idle */
+ if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000))
+ /* don't fail here, log a message to keep track */
+ DRM_ERROR("%s :timed out trying to stop ring", ring->name);
+
if (I915_NEED_GFX_HWS(dev))
intel_ring_setup_status_page(ring);
else
@@ -982,6 +987,7 @@ void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
/* Flush the TLB for this page */
if (INTEL_INFO(dev)->gen >= 6) {
u32 reg = RING_INSTPM(ring->mmio_base);
+
I915_WRITE(reg,
_MASKED_BIT_ENABLE(INSTPM_TLB_INVALIDATE |
INSTPM_SYNC_FLUSH));
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 09af920..f11ceb2 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -33,6 +33,8 @@ struct intel_hw_status_page {
#define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base))
#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
+#define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base))
+
enum intel_ring_hangcheck_action {
HANGCHECK_IDLE = 0,
HANGCHECK_WAIT,
--
1.8.5.3
next prev parent reply other threads:[~2014-03-12 11:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-04 5:16 [PATCH] drm/i915: stop command parser before sync flush naresh.kumar.kachhi
2014-03-04 7:39 ` Chris Wilson
2014-03-12 6:50 ` [PATCH v1 0/2] disable rings " naresh.kumar.kachhi
2014-03-12 6:50 ` [PATCH v1 1/2] drm/i915: disable rings before HW status page setup naresh.kumar.kachhi
2014-03-12 6:50 ` [PATCH v1 2/2] drm/i915: warn if ring is active before sync flush naresh.kumar.kachhi
2014-03-12 8:06 ` [PATCH v1 0/2] disable rings " Chris Wilson
2014-03-12 8:12 ` Chris Wilson
2014-03-12 11:09 ` [PATCH v2 0/3] " naresh.kumar.kachhi
2014-03-12 11:09 ` [PATCH v2 1/3] drm/i915: disable rings before HW status page setup naresh.kumar.kachhi
2014-03-12 11:09 ` naresh.kumar.kachhi [this message]
2014-03-12 11:18 ` [PATCH v2 2/3] drm/i915: wait for rings to become idle once disabled Chris Wilson
2014-03-12 11:09 ` [PATCH v2 3/3] drm/i915: warn if ring is active before sync flush naresh.kumar.kachhi
2014-03-12 11:28 ` [PATCH v2 0/3] disable rings " Chris Wilson
2014-03-12 15:07 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394622582-21762-3-git-send-email-naresh.kumar.kachhi@intel.com \
--to=naresh.kumar.kachhi@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox