[PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages

Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
@ 2017-04-28  8:02 Ander Conselvan de Oliveira
  2017-04-28  8:50 ` Chauhan, Madhav
  2017-04-28 11:02 ` ✓ Fi.CI.BAT: success for " Patchwork
  0 siblings, 2 replies; 6+ messages in thread
From: Ander Conselvan de Oliveira @ 2017-04-28  8:02 UTC (permalink / raw)
  To: intel-gfx
  Cc: Ander Conselvan de Oliveira, Deepak M, Jani Nikula,
	drm-intel-fixes, Daniel Vetter

The sequence in glk_dsi_device_ready() enters ULPS then waits until it is
*not* active to then disable it. The correct sequence according to the
spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is
zero, i.e., ULPS is active, and then disable ULPS.

Fixing the codition gets rid of the following spurious error messages:

[drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active

Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
Cc: Deepak M <m.deepak@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3ffe8b1..fc0ef49 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
 		val |= (ULPS_STATE_ENTER | DEVICE_READY);
 		I915_WRITE(MIPI_DEVICE_READY(port), val);
 
-		/* Wait for ULPS Not active */
+		/* Wait for ULPS active */
 		if (intel_wait_for_register(dev_priv,
-				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
-				GLK_ULPS_NOT_ACTIVE, 20))
-			DRM_ERROR("ULPS is still active\n");
+				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20))
+			DRM_ERROR("ULPS not active\n");
 
 		/* Exit ULPS */
 		val = I915_READ(MIPI_DEVICE_READY(port));
-- 
2.9.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
  2017-04-28  8:02 [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages Ander Conselvan de Oliveira
@ 2017-04-28  8:50 ` Chauhan, Madhav
  2017-04-28  8:57   ` Ander Conselvan De Oliveira
  2017-04-28 11:02 ` ✓ Fi.CI.BAT: success for " Patchwork
  1 sibling, 1 reply; 6+ messages in thread
From: Chauhan, Madhav @ 2017-04-28  8:50 UTC (permalink / raw)
  To: Conselvan De Oliveira, Ander, intel-gfx@lists.freedesktop.org
  Cc: Deepak M, Nikula, Jani, drm-intel-fixes@lists.freedesktop.org,
	Vetter, Daniel

> -----Original Message-----
> From: Conselvan De Oliveira, Ander
> Sent: Friday, April 28, 2017 1:32 PM
> To: intel-gfx@lists.freedesktop.org
> Cc: Conselvan De Oliveira, Ander <ander.conselvan.de.oliveira@intel.com>;
> Deepak M <m.deepak@intel.com>; Chauhan, Madhav
> <madhav.chauhan@intel.com>; Nikula, Jani <jani.nikula@intel.com>; Vetter,
> Daniel <daniel.vetter@intel.com>; Jani Nikula <jani.nikula@linux.intel.com>;
> drm-intel-fixes@lists.freedesktop.org
> Subject: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active"
> messages
> 
> The sequence in glk_dsi_device_ready() enters ULPS then waits until it is
> *not* active to then disable it. The correct sequence according to the spec is
> to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is zero, i.e., ULPS
> is active, and then disable ULPS.
> 
> Fixing the codition gets rid of the following spurious error messages:

Please correct the typo error to "condition", otherwise looks good.
Thanks for catching this.

> 
> [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active
> 
> Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
> Cc: Deepak M <m.deepak@intel.com>
> Cc: Madhav Chauhan <madhav.chauhan@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: intel-gfx@lists.freedesktop.org
> Cc: <drm-intel-fixes@lists.freedesktop.org>
> Signed-off-by: Ander Conselvan de Oliveira
> <ander.conselvan.de.oliveira@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index 3ffe8b1..fc0ef49 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct
> intel_encoder *encoder)
>  		val |= (ULPS_STATE_ENTER | DEVICE_READY);
>  		I915_WRITE(MIPI_DEVICE_READY(port), val);
> 
> -		/* Wait for ULPS Not active */
> +		/* Wait for ULPS active */
>  		if (intel_wait_for_register(dev_priv,
> -				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
> -				GLK_ULPS_NOT_ACTIVE, 20))
> -			DRM_ERROR("ULPS is still active\n");
> +				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0,
> 20))
> +			DRM_ERROR("ULPS not active\n");
> 
>  		/* Exit ULPS */
>  		val = I915_READ(MIPI_DEVICE_READY(port));
> --
> 2.9.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
  2017-04-28  8:50 ` Chauhan, Madhav
@ 2017-04-28  8:57   ` Ander Conselvan De Oliveira
  2017-04-28 12:44     ` Chauhan, Madhav
  0 siblings, 1 reply; 6+ messages in thread
From: Ander Conselvan De Oliveira @ 2017-04-28  8:57 UTC (permalink / raw)
  To: Chauhan, Madhav, intel-gfx@lists.freedesktop.org
  Cc: Deepak M, Nikula, Jani, drm-intel-fixes@lists.freedesktop.org,
	Vetter, Daniel

On Fri, 2017-04-28 at 08:50 +0000, Chauhan, Madhav wrote:
> > -----Original Message-----
> > From: Conselvan De Oliveira, Ander
> > Sent: Friday, April 28, 2017 1:32 PM
> > To: intel-gfx@lists.freedesktop.org
> > Cc: Conselvan De Oliveira, Ander <ander.conselvan.de.oliveira@intel.com>;
> > Deepak M <m.deepak@intel.com>; Chauhan, Madhav
> > <madhav.chauhan@intel.com>; Nikula, Jani <jani.nikula@intel.com>; Vetter,
> > Daniel <daniel.vetter@intel.com>; Jani Nikula <jani.nikula@linux.intel.com>;
> > drm-intel-fixes@lists.freedesktop.org
> > Subject: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active"
> > messages
> > 
> > The sequence in glk_dsi_device_ready() enters ULPS then waits until it is
> > *not* active to then disable it. The correct sequence according to the spec is
> > to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is zero, i.e., ULPS
> > is active, and then disable ULPS.
> > 
> > Fixing the codition gets rid of the following spurious error messages:
> 
> Please correct the typo error to "condition", otherwise looks good.
> Thanks for catching this.

If you upgrade the above statement to a Reviewed-by, I can fix the typo while
merging?

Ander

> 
> > 
> > [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active
> > 
> > Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
> > Cc: Deepak M <m.deepak@intel.com>
> > Cc: Madhav Chauhan <madhav.chauhan@intel.com>
> > Cc: Jani Nikula <jani.nikula@intel.com>
> > Cc: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: Jani Nikula <jani.nikula@linux.intel.com>
> > Cc: intel-gfx@lists.freedesktop.org
> > Cc: <drm-intel-fixes@lists.freedesktop.org>
> > Signed-off-by: Ander Conselvan de Oliveira
> > <ander.conselvan.de.oliveira@intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_dsi.c | 7 +++----
> >  1 file changed, 3 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > b/drivers/gpu/drm/i915/intel_dsi.c
> > index 3ffe8b1..fc0ef49 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct
> > intel_encoder *encoder)
> >  		val |= (ULPS_STATE_ENTER | DEVICE_READY);
> >  		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > 
> > -		/* Wait for ULPS Not active */
> > +		/* Wait for ULPS active */
> >  		if (intel_wait_for_register(dev_priv,
> > -				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
> > -				GLK_ULPS_NOT_ACTIVE, 20))
> > -			DRM_ERROR("ULPS is still active\n");
> > +				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0,
> > 20))
> > +			DRM_ERROR("ULPS not active\n");
> > 
> >  		/* Exit ULPS */
> >  		val = I915_READ(MIPI_DEVICE_READY(port));
> > --
> > 2.9.3
> 
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
  2017-04-28  8:57   ` Ander Conselvan De Oliveira
@ 2017-04-28 12:44     ` Chauhan, Madhav
  2017-04-28 14:16       ` Ander Conselvan De Oliveira
  0 siblings, 1 reply; 6+ messages in thread
From: Chauhan, Madhav @ 2017-04-28 12:44 UTC (permalink / raw)
  To: 'Ander Conselvan De Oliveira',
	intel-gfx@lists.freedesktop.org
  Cc: Deepak M, Nikula, Jani, drm-intel-fixes@lists.freedesktop.org,
	Vetter, Daniel

> -----Original Message-----
> From: Ander Conselvan De Oliveira [mailto:conselvan2@gmail.com]
> Sent: Friday, April 28, 2017 2:28 PM
> To: Chauhan, Madhav <madhav.chauhan@intel.com>; intel-
> gfx@lists.freedesktop.org
> Cc: Deepak M <m.deepak@intel.com>; Nikula, Jani <jani.nikula@intel.com>;
> Vetter, Daniel <daniel.vetter@intel.com>; Jani Nikula
> <jani.nikula@linux.intel.com>; drm-intel-fixes@lists.freedesktop.org
> Subject: Re: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active"
> messages
> 
> On Fri, 2017-04-28 at 08:50 +0000, Chauhan, Madhav wrote:
> > > -----Original Message-----
> > > From: Conselvan De Oliveira, Ander
> > > Sent: Friday, April 28, 2017 1:32 PM
> > > To: intel-gfx@lists.freedesktop.org
> > > Cc: Conselvan De Oliveira, Ander
> > > <ander.conselvan.de.oliveira@intel.com>;
> > > Deepak M <m.deepak@intel.com>; Chauhan, Madhav
> > > <madhav.chauhan@intel.com>; Nikula, Jani <jani.nikula@intel.com>;
> > > Vetter, Daniel <daniel.vetter@intel.com>; Jani Nikula
> > > <jani.nikula@linux.intel.com>; drm-intel-fixes@lists.freedesktop.org
> > > Subject: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active"
> > > messages
> > >
> > > The sequence in glk_dsi_device_ready() enters ULPS then waits until
> > > it is
> > > *not* active to then disable it. The correct sequence according to
> > > the spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE
> > > bit is zero, i.e., ULPS is active, and then disable ULPS.
> > >
> > > Fixing the codition gets rid of the following spurious error messages:
> >
> > Please correct the typo error to "condition", otherwise looks good.
> > Thanks for catching this.
> 
> If you upgrade the above statement to a Reviewed-by, I can fix the typo while
> merging?
> 
> Ander
> 
> >
> > >
> > > [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active
> > >
> > > Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable
> > > sequence")
> > > Cc: Deepak M <m.deepak@intel.com>
> > > Cc: Madhav Chauhan <madhav.chauhan@intel.com>
> > > Cc: Jani Nikula <jani.nikula@intel.com>
> > > Cc: Daniel Vetter <daniel.vetter@intel.com>
> > > Cc: Jani Nikula <jani.nikula@linux.intel.com>
> > > Cc: intel-gfx@lists.freedesktop.org
> > > Cc: <drm-intel-fixes@lists.freedesktop.org>
> > > Signed-off-by: Ander Conselvan de Oliveira
> > > <ander.conselvan.de.oliveira@intel.com>

Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>


> > > ---
> > >  drivers/gpu/drm/i915/intel_dsi.c | 7 +++----
> > >  1 file changed, 3 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > > b/drivers/gpu/drm/i915/intel_dsi.c
> > > index 3ffe8b1..fc0ef49 100644
> > > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > > @@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct
> > > intel_encoder *encoder)
> > >  		val |= (ULPS_STATE_ENTER | DEVICE_READY);
> > >  		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > >
> > > -		/* Wait for ULPS Not active */
> > > +		/* Wait for ULPS active */
> > >  		if (intel_wait_for_register(dev_priv,
> > > -				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
> > > -				GLK_ULPS_NOT_ACTIVE, 20))
> > > -			DRM_ERROR("ULPS is still active\n");
> > > +				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0,
> > > 20))
> > > +			DRM_ERROR("ULPS not active\n");
> > >
> > >  		/* Exit ULPS */
> > >  		val = I915_READ(MIPI_DEVICE_READY(port));
> > > --
> > > 2.9.3
> >
> >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
  2017-04-28 12:44     ` Chauhan, Madhav
@ 2017-04-28 14:16       ` Ander Conselvan De Oliveira
  0 siblings, 0 replies; 6+ messages in thread
From: Ander Conselvan De Oliveira @ 2017-04-28 14:16 UTC (permalink / raw)
  To: Chauhan, Madhav, intel-gfx@lists.freedesktop.org
  Cc: Deepak M, Nikula, Jani, drm-intel-fixes@lists.freedesktop.org,
	Vetter, Daniel

On Fri, 2017-04-28 at 12:44 +0000, Chauhan, Madhav wrote:
> > -----Original Message-----
> > From: Ander Conselvan De Oliveira [mailto:conselvan2@gmail.com]
> > Sent: Friday, April 28, 2017 2:28 PM
> > To: Chauhan, Madhav <madhav.chauhan@intel.com>; intel-
> > gfx@lists.freedesktop.org
> > Cc: Deepak M <m.deepak@intel.com>; Nikula, Jani <jani.nikula@intel.com>;
> > Vetter, Daniel <daniel.vetter@intel.com>; Jani Nikula
> > <jani.nikula@linux.intel.com>; drm-intel-fixes@lists.freedesktop.org
> > Subject: Re: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active"
> > messages
> > 
> > On Fri, 2017-04-28 at 08:50 +0000, Chauhan, Madhav wrote:
> > > > -----Original Message-----
> > > > From: Conselvan De Oliveira, Ander
> > > > Sent: Friday, April 28, 2017 1:32 PM
> > > > To: intel-gfx@lists.freedesktop.org
> > > > Cc: Conselvan De Oliveira, Ander
> > > > <ander.conselvan.de.oliveira@intel.com>;
> > > > Deepak M <m.deepak@intel.com>; Chauhan, Madhav
> > > > <madhav.chauhan@intel.com>; Nikula, Jani <jani.nikula@intel.com>;
> > > > Vetter, Daniel <daniel.vetter@intel.com>; Jani Nikula
> > > > <jani.nikula@linux.intel.com>; drm-intel-fixes@lists.freedesktop.org
> > > > Subject: [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active"
> > > > messages
> > > > 
> > > > The sequence in glk_dsi_device_ready() enters ULPS then waits until
> > > > it is
> > > > *not* active to then disable it. The correct sequence according to
> > > > the spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE
> > > > bit is zero, i.e., ULPS is active, and then disable ULPS.
> > > > 
> > > > Fixing the codition gets rid of the following spurious error messages:
> > > 
> > > Please correct the typo error to "condition", otherwise looks good.
> > > Thanks for catching this.
> > 
> > If you upgrade the above statement to a Reviewed-by, I can fix the typo while
> > merging?
> > 
> > Ander
> > 
> > > 
> > > > 
> > > > [drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active
> > > > 
> > > > Fixes: 4644848369c0 ("drm/i915/glk: Add MIPIIO Enable/disable
> > > > sequence")
> > > > Cc: Deepak M <m.deepak@intel.com>
> > > > Cc: Madhav Chauhan <madhav.chauhan@intel.com>
> > > > Cc: Jani Nikula <jani.nikula@intel.com>
> > > > Cc: Daniel Vetter <daniel.vetter@intel.com>
> > > > Cc: Jani Nikula <jani.nikula@linux.intel.com>
> > > > Cc: intel-gfx@lists.freedesktop.org
> > > > Cc: <drm-intel-fixes@lists.freedesktop.org>
> > > > Signed-off-by: Ander Conselvan de Oliveira
> > > > <ander.conselvan.de.oliveira@intel.com>
> 
> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>

Pushed with the typo fixed. Thanks for reviewing.

Ander

> 
> 
> > > > ---
> > > >  drivers/gpu/drm/i915/intel_dsi.c | 7 +++----
> > > >  1 file changed, 3 insertions(+), 4 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > > > b/drivers/gpu/drm/i915/intel_dsi.c
> > > > index 3ffe8b1..fc0ef49 100644
> > > > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > > > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > > > @@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct
> > > > intel_encoder *encoder)
> > > >  		val |= (ULPS_STATE_ENTER | DEVICE_READY);
> > > >  		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > > > 
> > > > -		/* Wait for ULPS Not active */
> > > > +		/* Wait for ULPS active */
> > > >  		if (intel_wait_for_register(dev_priv,
> > > > -				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
> > > > -				GLK_ULPS_NOT_ACTIVE, 20))
> > > > -			DRM_ERROR("ULPS is still active\n");
> > > > +				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0,
> > > > 20))
> > > > +			DRM_ERROR("ULPS not active\n");
> > > > 
> > > >  		/* Exit ULPS */
> > > >  		val = I915_READ(MIPI_DEVICE_READY(port));
> > > > --
> > > > 2.9.3
> > > 
> > > 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 6+ messages in thread

* ✓ Fi.CI.BAT: success for drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
  2017-04-28  8:02 [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages Ander Conselvan de Oliveira
  2017-04-28  8:50 ` Chauhan, Madhav
@ 2017-04-28 11:02 ` Patchwork
  1 sibling, 0 replies; 6+ messages in thread
From: Patchwork @ 2017-04-28 11:02 UTC (permalink / raw)
  To: Ander Conselvan de Oliveira; +Cc: intel-gfx

== Series Details ==

Series: drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
URL   : https://patchwork.freedesktop.org/series/23680/
State : success

== Summary ==

Series 23680v1 drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
https://patchwork.freedesktop.org/api/1.0/series/23680/revisions/1/mbox/

Test gem_exec_suspend:
        Subgroup basic-s4-devices:
                dmesg-warn -> PASS       (fi-kbl-7560u) fdo#100125
Test kms_flip:
        Subgroup basic-flip-vs-dpms:
                pass       -> DMESG-WARN (fi-byt-j1900) fdo#100652

fdo#100125 https://bugs.freedesktop.org/show_bug.cgi?id=100125
fdo#100652 https://bugs.freedesktop.org/show_bug.cgi?id=100652

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time:427s
fi-bdw-gvtdvm    total:278  pass:256  dwarn:8   dfail:0   fail:0   skip:14  time:429s
fi-bsw-n3050     total:278  pass:242  dwarn:0   dfail:0   fail:0   skip:36  time:579s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time:509s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time:542s
fi-byt-j1900     total:278  pass:253  dwarn:1   dfail:0   fail:0   skip:24  time:484s
fi-byt-n2820     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:478s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:406s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time:402s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time:416s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:486s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:471s
fi-kbl-7500u     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time:456s
fi-kbl-7560u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:563s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:455s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time:569s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time:456s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time:493s
fi-skl-gvtdvm    total:278  pass:265  dwarn:0   dfail:0   fail:0   skip:13  time:429s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time:532s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time:400s

86cc4197d2fa4c45b75bf54026765d27d86b84c8 drm-tip: 2017y-04m-28d-09h-14m-47s UTC integration manifest
b7f9ab5 drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4575/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2017-04-28 14:16 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-04-28  8:02 [PATCH] drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages Ander Conselvan de Oliveira
2017-04-28  8:50 ` Chauhan, Madhav
2017-04-28  8:57   ` Ander Conselvan De Oliveira
2017-04-28 12:44     ` Chauhan, Madhav
2017-04-28 14:16       ` Ander Conselvan De Oliveira
2017-04-28 11:02 ` ✓ Fi.CI.BAT: success for " Patchwork

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox