From: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
To: "puthik@chromium.org" <puthik@chromium.org>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v6 6/9] drm/i915: Support dynamic backlight via DPCD register
Date: Thu, 11 May 2017 05:45:24 +0000 [thread overview]
Message-ID: <1494482718.23186.23.camel@dk-H97M-D3H> (raw)
In-Reply-To: <20170509234052.189575-7-puthik@chromium.org>
On Tue, 2017-05-09 at 16:40 -0700, Puthikorn Voravootivat wrote:
> This patch enables dynamic backlight by default for eDP
> panel that supports this feature via DPCD register and
> set minimum / maximum brightness to 0% and 100% of the
> normal brightness.
I realized I replied to the previous version of this patch.
Should there be a switch for a feature like this that can affect image
quality?
-DK
>
> Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
> ---
> drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 39 ++++++++++++++++++++++-----
> 1 file changed, 33 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> index 5ef3ade7c40e..7d323af96636 100644
> --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> @@ -97,10 +97,27 @@ intel_dp_aux_set_backlight(struct intel_connector *connector, u32 level)
> }
> }
>
> +/*
> + * Set minimum / maximum dynamic brightness percentage. This value is expressed
> + * as the percentage of normal brightness in 5% increments.
> + */
> +static void
> +intel_dp_aux_set_dynamic_backlight_percent(struct intel_dp *intel_dp,
> + u32 min, u32 max)
> +{
> + u8 dbc[] = { DIV_ROUND_CLOSEST(min, 5), DIV_ROUND_CLOSEST(max, 5) };
> +
> + if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET,
> + dbc, sizeof(dbc) < 0)) {
> + DRM_DEBUG_KMS("Failed to write aux DBC brightness level\n");
> + }
> +}
> +
> static void intel_dp_aux_enable_backlight(struct intel_connector *connector)
> {
> struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
> uint8_t dpcd_buf = 0;
> + uint8_t new_dpcd_buf = 0;
> uint8_t edp_backlight_mode = 0;
>
> if (drm_dp_dpcd_readb(&intel_dp->aux,
> @@ -110,18 +127,15 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector)
> return;
> }
>
> + new_dpcd_buf = dpcd_buf;
> edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
>
> switch (edp_backlight_mode) {
> case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM:
> case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET:
> case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT:
> - dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> - dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> - if (drm_dp_dpcd_writeb(&intel_dp->aux,
> - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf) < 0) {
> - DRM_DEBUG_KMS("Failed to write aux backlight mode\n");
> - }
> + new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> + new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> break;
>
> /* Do nothing when it is already DPCD mode */
> @@ -130,6 +144,19 @@ static void intel_dp_aux_enable_backlight(struct intel_connector *connector)
> break;
> }
>
> + if (intel_dp->edp_dpcd[2] & DP_EDP_DYNAMIC_BACKLIGHT_CAP) {
> + new_dpcd_buf |= DP_EDP_DYNAMIC_BACKLIGHT_ENABLE;
> + intel_dp_aux_set_dynamic_backlight_percent(intel_dp, 0, 100);
> + DRM_DEBUG_KMS("Enable dynamic brightness.\n");
> + }
> +
> + if (new_dpcd_buf != dpcd_buf) {
> + if (drm_dp_dpcd_writeb(&intel_dp->aux,
> + DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
> + DRM_DEBUG_KMS("Failed to write aux backlight mode\n");
> + }
> + }
> +
> set_aux_backlight_enable(intel_dp, true);
> }
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-05-11 5:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-09 23:40 [PATCH v6 0/9] Enhancement to intel_dp_aux_backlight driver Puthikorn Voravootivat
2017-05-09 23:40 ` [PATCH v6 1/9] drm/i915: Fix cap check for " Puthikorn Voravootivat
2017-05-11 0:14 ` Pandiyan, Dhinakaran
2017-05-09 23:40 ` [PATCH v6 2/9] drm/i915: Correctly enable backlight brightness adjustment via DPCD Puthikorn Voravootivat
2017-05-09 23:40 ` [PATCH v6 3/9] drm/i915: Drop AUX backlight enable check for backlight control Puthikorn Voravootivat
2017-05-11 0:39 ` Pandiyan, Dhinakaran
2017-05-11 21:01 ` Puthikorn Voravootivat
2017-05-09 23:40 ` [PATCH v6 4/9] drm/i915: Allow choosing how to adjust brightness if both supported Puthikorn Voravootivat
2017-05-11 0:50 ` Pandiyan, Dhinakaran
2017-05-09 23:40 ` [PATCH v6 5/9] drm/i915: Set backlight mode before enable backlight Puthikorn Voravootivat
2017-05-09 23:40 ` [PATCH v6 6/9] drm/i915: Support dynamic backlight via DPCD register Puthikorn Voravootivat
2017-05-11 5:45 ` Pandiyan, Dhinakaran [this message]
2017-05-09 23:40 ` [PATCH v6 7/9] drm/i915: Restore brightness level in aux backlight driver Puthikorn Voravootivat
2017-05-09 23:40 ` [PATCH v6 8/9] drm: Add definition for eDP backlight frequency Puthikorn Voravootivat
2017-05-11 1:09 ` Pandiyan, Dhinakaran
2017-05-09 23:40 ` [PATCH v6 9/9] drm/i915: Set PWM divider to match desired frequency in vbt Puthikorn Voravootivat
2017-05-10 7:45 ` ✗ Fi.CI.BAT: failure for Enhancement to intel_dp_aux_backlight driver (rev5) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494482718.23186.23.camel@dk-H97M-D3H \
--to=dhinakaran.pandiyan@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=puthik@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox