public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Ben Widawsky <ben@bwidawsk.net>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] reg_read: basic register read ioctl test
Date: Thu, 12 Jul 2012 10:06:00 +0200	[thread overview]
Message-ID: <20120712080600.GB5039@phenom.ffwll.local> (raw)
In-Reply-To: <1342051680-32560-1-git-send-email-ben@bwidawsk.net>

On Wed, Jul 11, 2012 at 05:08:00PM -0700, Ben Widawsky wrote:
> This will need to get modified when the ioctl expands, and so is only
> here for reference/to make Daniel happy.
> 
> Signed-off-by: Ben Widawsky <ben@bwidawsk.net>

If you go with the (offset, size) table to check things, I think you
should add a test to read a valid reg offset, but with the wrong size.
Otherwise this looks good.
-Daniel
> ---
>  tests/drm_reg_read.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 tests/drm_reg_read.c
> 
> diff --git a/tests/drm_reg_read.c b/tests/drm_reg_read.c
> new file mode 100644
> index 0000000..d28039b
> --- /dev/null
> +++ b/tests/drm_reg_read.c
> @@ -0,0 +1,86 @@
> +/*
> + * Copyright © 2012 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Authors:
> + *    Ben Widawsky <ben@bwidawsk.net>
> + *
> + */
> +
> +#include <stdio.h>
> +#include <string.h>
> +#include "i915_drm.h"
> +#include "drmtest.h"
> +
> +struct local_drm_i915_reg_read {
> +	__u64 offset;
> +	__u32 size;
> +	__u64 val; /* Return value */
> +	__u32 pad;
> +};
> +
> +
> +#define REG_READ_IOCTL DRM_IOWR(DRM_COMMAND_BASE + 0x30, struct local_drm_i915_reg_read)
> +
> +static void handle_bad(int ret, int lerrno, int expected, const char *desc)
> +{
> +	if (ret != 0 && lerrno != expected) {
> +		fprintf(stderr, "%s - errno was %d, but should have been %d\n",
> +				desc, lerrno, expected);
> +		exit(EXIT_FAILURE);
> +	} else if (ret == 0) {
> +		fprintf(stderr, "%s - Command succeeded, but should have failed\n",
> +			desc);
> +		exit(EXIT_FAILURE);
> +	}
> +}
> +
> +int main(int argc, char *argv[])
> +{
> +	struct local_drm_i915_reg_read read;
> +	int ret, fd;
> +
> +	read.offset = 0x2358;
> +	read.size = 4;
> +
> +	fd = drm_open_any();
> +
> +	ret = drmIoctl(fd, REG_READ_IOCTL, &read);
> +	if (ret) {
> +		perror("positive test case failed\n");
> +		exit(EXIT_FAILURE);
> +	}
> +
> +	/* bad reg */
> +	read.offset = 0x12345678;
> +	ret = drmIoctl(fd, REG_READ_IOCTL, &read);
> +	handle_bad(ret, errno, ENXIO, "bad register");
> +
> +	/* bad size */
> +	read.offset = 0x2358;
> +	read.size = 5;
> +	ret = drmIoctl(fd, REG_READ_IOCTL, &read);
> +	handle_bad(ret, errno, EINVAL, "bad size");
> +
> +	close(fd);
> +
> +	exit(EXIT_SUCCESS);
> +}
> -- 
> 1.7.11.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48

  reply	other threads:[~2012-07-12  8:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-12  0:07 [PATCH] drm/i915: add register read IOCTL Ben Widawsky
2012-07-12  0:08 ` [PATCH] reg_read: basic register read ioctl test Ben Widawsky
2012-07-12  8:06   ` Daniel Vetter [this message]
2012-07-12  7:58 ` [PATCH] drm/i915: add register read IOCTL Daniel Vetter
2012-07-12  8:11   ` Chris Wilson
2012-07-12 18:01 ` [PATCH v2] " Ben Widawsky
2012-07-12 18:01   ` [PATCH] reg_read: basic register read ioctl test Ben Widawsky
2012-07-18 17:14   ` [PATCH v2] drm/i915: add register read IOCTL Eric Anholt
2012-07-18 17:22     ` Ben Widawsky
2012-07-18 18:12       ` Daniel Vetter
2012-07-12 19:42 ` [PATCH] " Eric Anholt
2012-07-12 20:08   ` Ben Widawsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120712080600.GB5039@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=ben@bwidawsk.net \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox