From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 01/10] drm/i915/lvds: Rename intel_lvds to intel_lvds_encoder
Date: Fri, 19 Oct 2012 09:46:16 -0700 [thread overview]
Message-ID: <20121019094616.1793bb18@jbarnes-desktop> (raw)
In-Reply-To: <43fb09cb4205dc39af0be3ea589a31481906bd14.1350644022.git.jani.nikula@intel.com>
On Fri, 19 Oct 2012 14:51:43 +0300
Jani Nikula <jani.nikula@intel.com> wrote:
> In preparation for introducing intel_lvds_connector to move some of the
> LVDS specific storage away from drm_i915_private, first rename the encoder
> to avoid potential confusion.
>
> Based on earlier work by Chris Wilson <chris@chris-wilson.co.uk>
>
> CC: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/intel_lvds.c | 129 ++++++++++++++++++-------------------
> 1 file changed, 61 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 40d72bd..61bdf4c 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -41,7 +41,7 @@
> #include <linux/acpi.h>
>
> /* Private structure for the integrated LVDS support */
> -struct intel_lvds {
> +struct intel_lvds_encoder {
> struct intel_encoder base;
>
> struct edid *edid;
> @@ -54,15 +54,15 @@ struct intel_lvds {
> struct drm_display_mode *fixed_mode;
> };
>
> -static struct intel_lvds *to_intel_lvds(struct drm_encoder *encoder)
> +static struct intel_lvds_encoder *to_lvds_encoder(struct drm_encoder *encoder)
> {
> - return container_of(encoder, struct intel_lvds, base.base);
> + return container_of(encoder, struct intel_lvds_encoder, base.base);
> }
>
> -static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
> +static struct intel_lvds_encoder *intel_attached_lvds(struct drm_connector *connector)
> {
> return container_of(intel_attached_encoder(connector),
> - struct intel_lvds, base);
> + struct intel_lvds_encoder, base);
> }
>
> static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
> @@ -97,7 +97,7 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
> static void intel_enable_lvds(struct intel_encoder *encoder)
> {
> struct drm_device *dev = encoder->base.dev;
> - struct intel_lvds *intel_lvds = to_intel_lvds(&encoder->base);
> + struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> struct drm_i915_private *dev_priv = dev->dev_private;
> u32 ctl_reg, lvds_reg, stat_reg;
> @@ -114,7 +114,7 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
>
> I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
>
> - if (intel_lvds->pfit_dirty) {
> + if (lvds_encoder->pfit_dirty) {
> /*
> * Enable automatic panel scaling so that non-native modes
> * fill the screen. The panel fitter should only be
> @@ -122,12 +122,12 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
> * register description and PRM.
> */
> DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
> - intel_lvds->pfit_control,
> - intel_lvds->pfit_pgm_ratios);
> + lvds_encoder->pfit_control,
> + lvds_encoder->pfit_pgm_ratios);
>
> - I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
> - I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
> - intel_lvds->pfit_dirty = false;
> + I915_WRITE(PFIT_PGM_RATIOS, lvds_encoder->pfit_pgm_ratios);
> + I915_WRITE(PFIT_CONTROL, lvds_encoder->pfit_control);
> + lvds_encoder->pfit_dirty = false;
> }
>
> I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
> @@ -141,7 +141,7 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
> static void intel_disable_lvds(struct intel_encoder *encoder)
> {
> struct drm_device *dev = encoder->base.dev;
> - struct intel_lvds *intel_lvds = to_intel_lvds(&encoder->base);
> + struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
> struct drm_i915_private *dev_priv = dev->dev_private;
> u32 ctl_reg, lvds_reg, stat_reg;
>
> @@ -161,9 +161,9 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
> if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
> DRM_ERROR("timed out waiting for panel to power off\n");
>
> - if (intel_lvds->pfit_control) {
> + if (lvds_encoder->pfit_control) {
> I915_WRITE(PFIT_CONTROL, 0);
> - intel_lvds->pfit_dirty = true;
> + lvds_encoder->pfit_dirty = true;
> }
>
> I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
> @@ -173,8 +173,8 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
> static int intel_lvds_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> - struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
> - struct drm_display_mode *fixed_mode = intel_lvds->fixed_mode;
> + struct intel_lvds_encoder *lvds_encoder = intel_attached_lvds(connector);
> + struct drm_display_mode *fixed_mode = lvds_encoder->fixed_mode;
>
> if (mode->hdisplay > fixed_mode->hdisplay)
> return MODE_PANEL;
> @@ -250,8 +250,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> {
> struct drm_device *dev = encoder->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
> - struct intel_crtc *intel_crtc = intel_lvds->base.new_crtc;
> + struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
> + struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
> u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
> int pipe;
>
> @@ -261,7 +261,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> return false;
> }
>
> - if (intel_encoder_check_is_cloned(&intel_lvds->base))
> + if (intel_encoder_check_is_cloned(&lvds_encoder->base))
> return false;
>
> /*
> @@ -270,10 +270,10 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> * with the panel scaling set up to source from the H/VDisplay
> * of the original mode.
> */
> - intel_fixed_panel_mode(intel_lvds->fixed_mode, adjusted_mode);
> + intel_fixed_panel_mode(lvds_encoder->fixed_mode, adjusted_mode);
>
> if (HAS_PCH_SPLIT(dev)) {
> - intel_pch_panel_fitting(dev, intel_lvds->fitting_mode,
> + intel_pch_panel_fitting(dev, lvds_encoder->fitting_mode,
> mode, adjusted_mode);
> return true;
> }
> @@ -299,7 +299,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
>
> drm_mode_set_crtcinfo(adjusted_mode, 0);
>
> - switch (intel_lvds->fitting_mode) {
> + switch (lvds_encoder->fitting_mode) {
> case DRM_MODE_SCALE_CENTER:
> /*
> * For centered modes, we have to calculate border widths &
> @@ -397,11 +397,11 @@ out:
> if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
> pfit_control |= PANEL_8TO6_DITHER_ENABLE;
>
> - if (pfit_control != intel_lvds->pfit_control ||
> - pfit_pgm_ratios != intel_lvds->pfit_pgm_ratios) {
> - intel_lvds->pfit_control = pfit_control;
> - intel_lvds->pfit_pgm_ratios = pfit_pgm_ratios;
> - intel_lvds->pfit_dirty = true;
> + if (pfit_control != lvds_encoder->pfit_control ||
> + pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) {
> + lvds_encoder->pfit_control = pfit_control;
> + lvds_encoder->pfit_pgm_ratios = pfit_pgm_ratios;
> + lvds_encoder->pfit_dirty = true;
> }
> dev_priv->lvds_border_bits = border;
>
> @@ -450,14 +450,14 @@ intel_lvds_detect(struct drm_connector *connector, bool force)
> */
> static int intel_lvds_get_modes(struct drm_connector *connector)
> {
> - struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
> + struct intel_lvds_encoder *lvds_encoder = intel_attached_lvds(connector);
> struct drm_device *dev = connector->dev;
> struct drm_display_mode *mode;
>
> - if (intel_lvds->edid)
> - return drm_add_edid_modes(connector, intel_lvds->edid);
> + if (lvds_encoder->edid)
> + return drm_add_edid_modes(connector, lvds_encoder->edid);
>
> - mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
> + mode = drm_mode_duplicate(dev, lvds_encoder->fixed_mode);
> if (mode == NULL)
> return 0;
>
> @@ -558,22 +558,22 @@ static int intel_lvds_set_property(struct drm_connector *connector,
> struct drm_property *property,
> uint64_t value)
> {
> - struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
> + struct intel_lvds_encoder *lvds_encoder = intel_attached_lvds(connector);
> struct drm_device *dev = connector->dev;
>
> if (property == dev->mode_config.scaling_mode_property) {
> - struct drm_crtc *crtc = intel_lvds->base.base.crtc;
> + struct drm_crtc *crtc = lvds_encoder->base.base.crtc;
>
> if (value == DRM_MODE_SCALE_NONE) {
> DRM_DEBUG_KMS("no scaling not supported\n");
> return -EINVAL;
> }
>
> - if (intel_lvds->fitting_mode == value) {
> + if (lvds_encoder->fitting_mode == value) {
> /* the LVDS scaling property is not changed */
> return 0;
> }
> - intel_lvds->fitting_mode = value;
> + lvds_encoder->fitting_mode = value;
> if (crtc && crtc->enabled) {
> /*
> * If the CRTC is enabled, the display will be changed
> @@ -905,7 +905,7 @@ static bool intel_lvds_supported(struct drm_device *dev)
> bool intel_lvds_init(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_lvds *intel_lvds;
> + struct intel_lvds_encoder *lvds_encoder;
> struct intel_encoder *intel_encoder;
> struct intel_connector *intel_connector;
> struct drm_connector *connector;
> @@ -938,22 +938,21 @@ bool intel_lvds_init(struct drm_device *dev)
> }
> }
>
> - intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
> - if (!intel_lvds) {
> + lvds_encoder = kzalloc(sizeof(struct intel_lvds_encoder), GFP_KERNEL);
> + if (!lvds_encoder)
> return false;
> - }
>
> intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
> if (!intel_connector) {
> - kfree(intel_lvds);
> + kfree(lvds_encoder);
> return false;
> }
>
> if (!HAS_PCH_SPLIT(dev)) {
> - intel_lvds->pfit_control = I915_READ(PFIT_CONTROL);
> + lvds_encoder->pfit_control = I915_READ(PFIT_CONTROL);
> }
>
> - intel_encoder = &intel_lvds->base;
> + intel_encoder = &lvds_encoder->base;
> encoder = &intel_encoder->base;
> connector = &intel_connector->base;
> drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
> @@ -993,7 +992,7 @@ bool intel_lvds_init(struct drm_device *dev)
> drm_connector_attach_property(&intel_connector->base,
> dev->mode_config.scaling_mode_property,
> DRM_MODE_SCALE_ASPECT);
> - intel_lvds->fitting_mode = DRM_MODE_SCALE_ASPECT;
> + lvds_encoder->fitting_mode = DRM_MODE_SCALE_ASPECT;
> /*
> * LVDS discovery:
> * 1) check for EDID on DDC
> @@ -1008,20 +1007,18 @@ bool intel_lvds_init(struct drm_device *dev)
> * Attempt to get the fixed panel mode from DDC. Assume that the
> * preferred mode is the right one.
> */
> - intel_lvds->edid = drm_get_edid(connector,
> - intel_gmbus_get_adapter(dev_priv,
> - pin));
> - if (intel_lvds->edid) {
> - if (drm_add_edid_modes(connector,
> - intel_lvds->edid)) {
> + lvds_encoder->edid = drm_get_edid(connector,
> + intel_gmbus_get_adapter(dev_priv, pin));
> + if (lvds_encoder->edid) {
> + if (drm_add_edid_modes(connector, lvds_encoder->edid)) {
> drm_mode_connector_update_edid_property(connector,
> - intel_lvds->edid);
> + lvds_encoder->edid);
> } else {
> - kfree(intel_lvds->edid);
> - intel_lvds->edid = NULL;
> + kfree(lvds_encoder->edid);
> + lvds_encoder->edid = NULL;
> }
> }
> - if (!intel_lvds->edid) {
> + if (!lvds_encoder->edid) {
> /* Didn't get an EDID, so
> * Set wide sync ranges so we get all modes
> * handed to valid_mode for checking
> @@ -1034,10 +1031,8 @@ bool intel_lvds_init(struct drm_device *dev)
>
> list_for_each_entry(scan, &connector->probed_modes, head) {
> if (scan->type & DRM_MODE_TYPE_PREFERRED) {
> - intel_lvds->fixed_mode =
> - drm_mode_duplicate(dev, scan);
> - intel_find_lvds_downclock(dev,
> - intel_lvds->fixed_mode,
> + lvds_encoder->fixed_mode = drm_mode_duplicate(dev, scan);
> + intel_find_lvds_downclock(dev, lvds_encoder->fixed_mode,
> connector);
> goto out;
> }
> @@ -1045,11 +1040,10 @@ bool intel_lvds_init(struct drm_device *dev)
>
> /* Failed to get EDID, what about VBT? */
> if (dev_priv->lfp_lvds_vbt_mode) {
> - intel_lvds->fixed_mode =
> + lvds_encoder->fixed_mode =
> drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
> - if (intel_lvds->fixed_mode) {
> - intel_lvds->fixed_mode->type |=
> - DRM_MODE_TYPE_PREFERRED;
> + if (lvds_encoder->fixed_mode) {
> + lvds_encoder->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> goto out;
> }
> }
> @@ -1069,16 +1063,15 @@ bool intel_lvds_init(struct drm_device *dev)
> crtc = intel_get_crtc_for_pipe(dev, pipe);
>
> if (crtc && (lvds & LVDS_PORT_EN)) {
> - intel_lvds->fixed_mode = intel_crtc_mode_get(dev, crtc);
> - if (intel_lvds->fixed_mode) {
> - intel_lvds->fixed_mode->type |=
> - DRM_MODE_TYPE_PREFERRED;
> + lvds_encoder->fixed_mode = intel_crtc_mode_get(dev, crtc);
> + if (lvds_encoder->fixed_mode) {
> + lvds_encoder->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> goto out;
> }
> }
>
> /* If we still don't have a mode after all that, give up. */
> - if (!intel_lvds->fixed_mode)
> + if (!lvds_encoder->fixed_mode)
> goto failed;
>
> out:
> @@ -1110,7 +1103,7 @@ failed:
> DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
> drm_connector_cleanup(connector);
> drm_encoder_cleanup(encoder);
> - kfree(intel_lvds);
> + kfree(lvds_encoder);
> kfree(intel_connector);
> return false;
> }
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
--
Jesse Barnes, Intel Open Source Technology Center
next prev parent reply other threads:[~2012-10-19 16:45 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 11:51 [PATCH 00/10] drm/i915: LVDS/eDP panel, EDID and fixed mode refactoring Jani Nikula
2012-10-19 11:51 ` [PATCH 01/10] drm/i915/lvds: Rename intel_lvds to intel_lvds_encoder Jani Nikula
2012-10-19 16:46 ` Jesse Barnes [this message]
2012-10-19 11:51 ` [PATCH 02/10] drm/i915/lvds: Introduce intel_lvds_connector Jani Nikula
2012-10-19 16:47 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 03/10] drm/i915/lvds: Move the acpi_lid_notifier from drm_i915_private to the connector Jani Nikula
2012-10-19 16:48 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 04/10] drm/i915: Backlight setup requires connector so pass it as parameter Jani Nikula
2012-10-19 16:54 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 05/10] drm/i915/lvds: Move some connector specific info across from the encoder Jani Nikula
2012-10-19 16:55 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 06/10] drm/i915/dp: Initialize eDP fixed mode in intel_dp_init Jani Nikula
2012-10-19 17:00 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 07/10] drm/i915: Create generic intel_panel for LVDS and eDP Jani Nikula
2012-10-19 17:04 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 08/10] drm/i915: Move the fixed mode to intel_panel Jani Nikula
2012-10-19 17:09 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 09/10] drm/i915: Do not free the passed EDID in intel_connector_update_modes() Jani Nikula
2012-10-19 17:10 ` Jesse Barnes
2012-10-19 11:51 ` [PATCH 10/10] drm/i915: Move cached EDID to intel_connector Jani Nikula
2012-10-19 17:13 ` Jesse Barnes
2012-10-19 17:58 ` [PATCH 00/10] drm/i915: LVDS/eDP panel, EDID and fixed mode refactoring Chris Wilson
2012-10-22 17:37 ` Daniel Vetter
-- strict thread matches above, loose matches on Subject: below --
2011-04-22 9:19 Share common logic between eDP and LVDS in panel Chris Wilson
2011-04-22 9:19 ` [PATCH 01/10] drm/i915/lvds: Rename intel_lvds to intel_lvds_encoder Chris Wilson
2011-04-22 16:18 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121019094616.1793bb18@jbarnes-desktop \
--to=jbarnes@virtuousgeek.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox