[PATCH 1/3] drm/i915: Store frontbuffer_bits in the plane

[PATCH 1/3] drm/i915: Store frontbuffer_bits in the plane

[ville.syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Avoid some 'switch (plane->type)' by storing the fronbuffer_bits in
intel_plane.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++--------------------------
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 drivers/gpu/drm/i915/intel_sprite.c  |  1 +
 3 files changed, 22 insertions(+), 55 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4c829b9..ae65516 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2604,7 +2604,7 @@ valid_fb:
 	primary->crtc = primary->state->crtc = &intel_crtc->base;
 	update_state_fb(primary);
 	intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
-	obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
+	obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bits;
 }
 
 static void i9xx_update_primary_plane(struct drm_crtc *crtc,
@@ -4733,25 +4733,12 @@ static void intel_pre_plane_update(struct intel_crtc *crtc)
 	struct drm_plane *p;
 
 	/* Track fb's for any planes being disabled */
-
 	drm_for_each_plane_mask(p, dev, atomic->disabled_planes) {
 		struct intel_plane *plane = to_intel_plane(p);
-		unsigned fb_bits = 0;
-
-		switch (p->type) {
-		case DRM_PLANE_TYPE_PRIMARY:
-			fb_bits = INTEL_FRONTBUFFER_PRIMARY(plane->pipe);
-			break;
-		case DRM_PLANE_TYPE_CURSOR:
-			fb_bits = INTEL_FRONTBUFFER_CURSOR(plane->pipe);
-			break;
-		case DRM_PLANE_TYPE_OVERLAY:
-			fb_bits = INTEL_FRONTBUFFER_SPRITE(plane->pipe);
-			break;
-		}
 
 		mutex_lock(&dev->struct_mutex);
-		i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL, fb_bits);
+		i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL,
+				  plane->frontbuffer_bits);
 		mutex_unlock(&dev->struct_mutex);
 	}
 
@@ -10717,11 +10704,12 @@ static void intel_unpin_work_fn(struct work_struct *__work)
 {
 	struct intel_unpin_work *work =
 		container_of(__work, struct intel_unpin_work, work);
-	struct drm_device *dev = work->crtc->dev;
-	enum pipe pipe = to_intel_crtc(work->crtc)->pipe;
+	struct intel_crtc *crtc = to_intel_crtc(work->crtc);
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_plane *primary = crtc->base.primary;
 
 	mutex_lock(&dev->struct_mutex);
-	intel_unpin_fb_obj(work->old_fb, work->crtc->primary->state);
+	intel_unpin_fb_obj(work->old_fb, primary->state);
 	drm_gem_object_unreference(&work->pending_flip_obj->base);
 
 	intel_fbc_update(dev);
@@ -10730,11 +10718,11 @@ static void intel_unpin_work_fn(struct work_struct *__work)
 		i915_gem_request_assign(&work->flip_queued_req, NULL);
 	mutex_unlock(&dev->struct_mutex);
 
-	intel_frontbuffer_flip_complete(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+	intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bits);
 	drm_framebuffer_unreference(work->old_fb);
 
-	BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
-	atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
+	BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
+	atomic_dec(&crtc->unpin_work_count);
 
 	kfree(work);
 }
@@ -11495,10 +11483,11 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	work->enable_stall_check = true;
 
 	i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
-			  INTEL_FRONTBUFFER_PRIMARY(pipe));
+			  to_intel_plane(primary)->frontbuffer_bits);
 
 	intel_fbc_disable(dev);
-	intel_frontbuffer_flip_prepare(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
+	intel_frontbuffer_flip_prepare(dev,
+				       to_intel_plane(primary)->frontbuffer_bits);
 	mutex_unlock(&dev->struct_mutex);
 
 	trace_i915_flip_request(intel_crtc->plane, obj);
@@ -11651,12 +11640,12 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
 	if (intel_wm_need_update(plane, plane_state))
 		intel_crtc->atomic.update_wm = true;
 
+	if (visible)
+		intel_crtc->atomic.fb_bits |=
+			to_intel_plane(plane)->frontbuffer_bits;
+
 	switch (plane->type) {
 	case DRM_PLANE_TYPE_PRIMARY:
-		if (visible)
-			intel_crtc->atomic.fb_bits |=
-			    INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
-
 		intel_crtc->atomic.wait_for_flips = true;
 		intel_crtc->atomic.pre_disable_primary = turn_off;
 		intel_crtc->atomic.post_enable_primary = turn_on;
@@ -11692,25 +11681,13 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
 		intel_crtc->atomic.update_fbc |= visible || mode_changed;
 		break;
 	case DRM_PLANE_TYPE_CURSOR:
-		if (visible)
-			intel_crtc->atomic.fb_bits |=
-			    INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe);
 		break;
 	case DRM_PLANE_TYPE_OVERLAY:
-		/*
-		 * 'prepare' is never called when plane is being disabled, so
-		 * we need to handle frontbuffer tracking as a special case
-		 */
-		if (visible)
-			intel_crtc->atomic.fb_bits |=
-			    INTEL_FRONTBUFFER_SPRITE(intel_crtc->pipe);
-
 		if (turn_off && !mode_changed) {
 			intel_crtc->atomic.wait_vblank = true;
 			intel_crtc->atomic.update_sprite_watermarks |=
 				1 << i;
 		}
-		break;
 	}
 	return 0;
 }
@@ -13592,27 +13569,13 @@ intel_prepare_plane_fb(struct drm_plane *plane,
 {
 	struct drm_device *dev = plane->dev;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
-	enum pipe pipe = intel_plane->pipe;
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
-	unsigned frontbuffer_bits = 0;
 	int ret = 0;
 
 	if (!obj)
 		return 0;
 
-	switch (plane->type) {
-	case DRM_PLANE_TYPE_PRIMARY:
-		frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe);
-		break;
-	case DRM_PLANE_TYPE_CURSOR:
-		frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe);
-		break;
-	case DRM_PLANE_TYPE_OVERLAY:
-		frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe);
-		break;
-	}
-
 	mutex_lock(&dev->struct_mutex);
 
 	if (plane->type == DRM_PLANE_TYPE_CURSOR &&
@@ -13626,7 +13589,7 @@ intel_prepare_plane_fb(struct drm_plane *plane,
 	}
 
 	if (ret == 0)
-		i915_gem_track_fb(old_obj, obj, frontbuffer_bits);
+		i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bits);
 
 	mutex_unlock(&dev->struct_mutex);
 
@@ -13845,6 +13808,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 	}
 	primary->pipe = pipe;
 	primary->plane = pipe;
+	primary->frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe);
 	primary->check_plane = intel_check_primary_plane;
 	primary->commit_plane = intel_commit_primary_plane;
 	primary->disable_plane = intel_disable_primary_plane;
@@ -14000,6 +13964,7 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
 	cursor->max_downscale = 1;
 	cursor->pipe = pipe;
 	cursor->plane = pipe;
+	cursor->frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe);
 	cursor->check_plane = intel_check_cursor_plane;
 	cursor->commit_plane = intel_commit_cursor_plane;
 	cursor->disable_plane = intel_disable_cursor_plane;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index e2174fd..de2cc26 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -590,6 +590,7 @@ struct intel_plane {
 	enum pipe pipe;
 	bool can_scale;
 	int max_downscale;
+	uint32_t frontbuffer_bits;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index e0045aa..3806f83 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1130,6 +1130,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe);
 	intel_plane->check_plane = intel_check_sprite_plane;
 	intel_plane->commit_plane = intel_commit_sprite_plane;
 	possible_crtcs = (1 << pipe);
-- 
2.3.6

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/3] drm/i915: Add debug messages for pipe enable/disable

[ville.syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Currently we don't have any real indication when a pipe gets
enabled/disabled. Add some.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ae65516..cd8fa05 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2110,6 +2110,8 @@ static void intel_enable_pipe(struct intel_crtc *crtc)
 	int reg;
 	u32 val;
 
+	DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
+
 	assert_planes_disabled(dev_priv, pipe);
 	assert_cursor_disabled(dev_priv, pipe);
 	assert_sprites_disabled(dev_priv, pipe);
@@ -2169,6 +2171,8 @@ static void intel_disable_pipe(struct intel_crtc *crtc)
 	int reg;
 	u32 val;
 
+	DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
+
 	/*
 	 * Make sure planes won't keep trying to pump pixels to us,
 	 * or we might hang the display.
-- 
2.3.6

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 3/3] drm/i915: Don't set cursor rotate bits when cursor is disabled

[ville.syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Let's keep the cursor control register at 0 when the cursor is disabled.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cd8fa05..29c584c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9896,10 +9896,10 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
 
 		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 			cntl |= CURSOR_PIPE_CSC_ENABLE;
-	}
 
-	if (crtc->cursor->state->rotation == BIT(DRM_ROTATE_180))
-		cntl |= CURSOR_ROTATE_180;
+		if (crtc->cursor->state->rotation == BIT(DRM_ROTATE_180))
+			cntl |= CURSOR_ROTATE_180;
+	}
 
 	if (intel_crtc->cursor_cntl != cntl) {
 		I915_WRITE(CURCNTR(pipe), cntl);
-- 
2.3.6

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 1/3] drm/i915: Store frontbuffer_bits in the plane

[Daniel Vetter]

On Wed, Jun 24, 2015 at 09:59:34PM +0300, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Avoid some 'switch (plane->type)' by storing the fronbuffer_bits in
> intel_plane.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Hm I just realized that we never got around to adding FB bits for the
additional sprite planes on vlv and gen9+. And that's been broken since
introduction, since the vlv sprite support is 1 year older than the FB
tracking. But at least with your patch here that's easy to fix.
-Daniel

> ---
>  drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++--------------------------
>  drivers/gpu/drm/i915/intel_drv.h     |  1 +
>  drivers/gpu/drm/i915/intel_sprite.c  |  1 +
>  3 files changed, 22 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4c829b9..ae65516 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2604,7 +2604,7 @@ valid_fb:
>  	primary->crtc = primary->state->crtc = &intel_crtc->base;
>  	update_state_fb(primary);
>  	intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
> -	obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
> +	obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bits;
>  }
>  
>  static void i9xx_update_primary_plane(struct drm_crtc *crtc,
> @@ -4733,25 +4733,12 @@ static void intel_pre_plane_update(struct intel_crtc *crtc)
>  	struct drm_plane *p;
>  
>  	/* Track fb's for any planes being disabled */
> -
>  	drm_for_each_plane_mask(p, dev, atomic->disabled_planes) {
>  		struct intel_plane *plane = to_intel_plane(p);
> -		unsigned fb_bits = 0;
> -
> -		switch (p->type) {
> -		case DRM_PLANE_TYPE_PRIMARY:
> -			fb_bits = INTEL_FRONTBUFFER_PRIMARY(plane->pipe);
> -			break;
> -		case DRM_PLANE_TYPE_CURSOR:
> -			fb_bits = INTEL_FRONTBUFFER_CURSOR(plane->pipe);
> -			break;
> -		case DRM_PLANE_TYPE_OVERLAY:
> -			fb_bits = INTEL_FRONTBUFFER_SPRITE(plane->pipe);
> -			break;
> -		}
>  
>  		mutex_lock(&dev->struct_mutex);
> -		i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL, fb_bits);
> +		i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL,
> +				  plane->frontbuffer_bits);
>  		mutex_unlock(&dev->struct_mutex);
>  	}
>  
> @@ -10717,11 +10704,12 @@ static void intel_unpin_work_fn(struct work_struct *__work)
>  {
>  	struct intel_unpin_work *work =
>  		container_of(__work, struct intel_unpin_work, work);
> -	struct drm_device *dev = work->crtc->dev;
> -	enum pipe pipe = to_intel_crtc(work->crtc)->pipe;
> +	struct intel_crtc *crtc = to_intel_crtc(work->crtc);
> +	struct drm_device *dev = crtc->base.dev;
> +	struct drm_plane *primary = crtc->base.primary;
>  
>  	mutex_lock(&dev->struct_mutex);
> -	intel_unpin_fb_obj(work->old_fb, work->crtc->primary->state);
> +	intel_unpin_fb_obj(work->old_fb, primary->state);
>  	drm_gem_object_unreference(&work->pending_flip_obj->base);
>  
>  	intel_fbc_update(dev);
> @@ -10730,11 +10718,11 @@ static void intel_unpin_work_fn(struct work_struct *__work)
>  		i915_gem_request_assign(&work->flip_queued_req, NULL);
>  	mutex_unlock(&dev->struct_mutex);
>  
> -	intel_frontbuffer_flip_complete(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
> +	intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bits);
>  	drm_framebuffer_unreference(work->old_fb);
>  
> -	BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
> -	atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
> +	BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
> +	atomic_dec(&crtc->unpin_work_count);
>  
>  	kfree(work);
>  }
> @@ -11495,10 +11483,11 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
>  	work->enable_stall_check = true;
>  
>  	i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
> -			  INTEL_FRONTBUFFER_PRIMARY(pipe));
> +			  to_intel_plane(primary)->frontbuffer_bits);
>  
>  	intel_fbc_disable(dev);
> -	intel_frontbuffer_flip_prepare(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
> +	intel_frontbuffer_flip_prepare(dev,
> +				       to_intel_plane(primary)->frontbuffer_bits);
>  	mutex_unlock(&dev->struct_mutex);
>  
>  	trace_i915_flip_request(intel_crtc->plane, obj);
> @@ -11651,12 +11640,12 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>  	if (intel_wm_need_update(plane, plane_state))
>  		intel_crtc->atomic.update_wm = true;
>  
> +	if (visible)
> +		intel_crtc->atomic.fb_bits |=
> +			to_intel_plane(plane)->frontbuffer_bits;
> +
>  	switch (plane->type) {
>  	case DRM_PLANE_TYPE_PRIMARY:
> -		if (visible)
> -			intel_crtc->atomic.fb_bits |=
> -			    INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
> -
>  		intel_crtc->atomic.wait_for_flips = true;
>  		intel_crtc->atomic.pre_disable_primary = turn_off;
>  		intel_crtc->atomic.post_enable_primary = turn_on;
> @@ -11692,25 +11681,13 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>  		intel_crtc->atomic.update_fbc |= visible || mode_changed;
>  		break;
>  	case DRM_PLANE_TYPE_CURSOR:
> -		if (visible)
> -			intel_crtc->atomic.fb_bits |=
> -			    INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe);
>  		break;
>  	case DRM_PLANE_TYPE_OVERLAY:
> -		/*
> -		 * 'prepare' is never called when plane is being disabled, so
> -		 * we need to handle frontbuffer tracking as a special case
> -		 */
> -		if (visible)
> -			intel_crtc->atomic.fb_bits |=
> -			    INTEL_FRONTBUFFER_SPRITE(intel_crtc->pipe);
> -
>  		if (turn_off && !mode_changed) {
>  			intel_crtc->atomic.wait_vblank = true;
>  			intel_crtc->atomic.update_sprite_watermarks |=
>  				1 << i;
>  		}
> -		break;
>  	}
>  	return 0;
>  }
> @@ -13592,27 +13569,13 @@ intel_prepare_plane_fb(struct drm_plane *plane,
>  {
>  	struct drm_device *dev = plane->dev;
>  	struct intel_plane *intel_plane = to_intel_plane(plane);
> -	enum pipe pipe = intel_plane->pipe;
>  	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
>  	struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
> -	unsigned frontbuffer_bits = 0;
>  	int ret = 0;
>  
>  	if (!obj)
>  		return 0;
>  
> -	switch (plane->type) {
> -	case DRM_PLANE_TYPE_PRIMARY:
> -		frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe);
> -		break;
> -	case DRM_PLANE_TYPE_CURSOR:
> -		frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe);
> -		break;
> -	case DRM_PLANE_TYPE_OVERLAY:
> -		frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe);
> -		break;
> -	}
> -
>  	mutex_lock(&dev->struct_mutex);
>  
>  	if (plane->type == DRM_PLANE_TYPE_CURSOR &&
> @@ -13626,7 +13589,7 @@ intel_prepare_plane_fb(struct drm_plane *plane,
>  	}
>  
>  	if (ret == 0)
> -		i915_gem_track_fb(old_obj, obj, frontbuffer_bits);
> +		i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bits);
>  
>  	mutex_unlock(&dev->struct_mutex);
>  
> @@ -13845,6 +13808,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
>  	}
>  	primary->pipe = pipe;
>  	primary->plane = pipe;
> +	primary->frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(pipe);
>  	primary->check_plane = intel_check_primary_plane;
>  	primary->commit_plane = intel_commit_primary_plane;
>  	primary->disable_plane = intel_disable_primary_plane;
> @@ -14000,6 +13964,7 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
>  	cursor->max_downscale = 1;
>  	cursor->pipe = pipe;
>  	cursor->plane = pipe;
> +	cursor->frontbuffer_bits = INTEL_FRONTBUFFER_CURSOR(pipe);
>  	cursor->check_plane = intel_check_cursor_plane;
>  	cursor->commit_plane = intel_commit_cursor_plane;
>  	cursor->disable_plane = intel_disable_cursor_plane;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index e2174fd..de2cc26 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -590,6 +590,7 @@ struct intel_plane {
>  	enum pipe pipe;
>  	bool can_scale;
>  	int max_downscale;
> +	uint32_t frontbuffer_bits;
>  
>  	/* Since we need to change the watermarks before/after
>  	 * enabling/disabling the planes, we need to store the parameters here
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index e0045aa..3806f83 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -1130,6 +1130,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
>  
>  	intel_plane->pipe = pipe;
>  	intel_plane->plane = plane;
> +	intel_plane->frontbuffer_bits = INTEL_FRONTBUFFER_SPRITE(pipe);
>  	intel_plane->check_plane = intel_check_sprite_plane;
>  	intel_plane->commit_plane = intel_commit_sprite_plane;
>  	possible_crtcs = (1 << pipe);
> -- 
> 2.3.6
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 3/3] drm/i915: Don't set cursor rotate bits when cursor is disabled

[Daniel Vetter]

On Wed, Jun 24, 2015 at 09:59:36PM +0300, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Let's keep the cursor control register at 0 when the cursor is disabled.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

All merged, with the slight naming bikeshed we discussed on irc squashed
into patch 1.

Thanks, Daniel

> ---
>  drivers/gpu/drm/i915/intel_display.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index cd8fa05..29c584c 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9896,10 +9896,10 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
>  
>  		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
>  			cntl |= CURSOR_PIPE_CSC_ENABLE;
> -	}
>  
> -	if (crtc->cursor->state->rotation == BIT(DRM_ROTATE_180))
> -		cntl |= CURSOR_ROTATE_180;
> +		if (crtc->cursor->state->rotation == BIT(DRM_ROTATE_180))
> +			cntl |= CURSOR_ROTATE_180;
> +	}
>  
>  	if (intel_crtc->cursor_cntl != cntl) {
>  		I915_WRITE(CURCNTR(pipe), cntl);
> -- 
> 2.3.6
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx