From: Michel Thierry <michel.thierry@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v7 15/20] drm/i915: Watchdog timeout: Pass GuC shared data structure during param load
Date: Thu, 27 Apr 2017 16:12:55 -0700 [thread overview]
Message-ID: <20170427231300.32841-16-michel.thierry@intel.com> (raw)
In-Reply-To: <20170427231300.32841-1-michel.thierry@intel.com>
For watchdog / media reset, the firmware must know the address of the shared
data page (the first page of the default context).
This information should be in DWORD 9 of the GUC_CTL structure.
v2: Use guc_ggtt_offset (Chris).
Store the ggtt offset of the default ctx as we needed for
suspend/resume/reset (Daniele).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
---
drivers/gpu/drm/i915/i915_guc_submission.c | 21 ++++++---------------
drivers/gpu/drm/i915/intel_guc_fwif.h | 2 +-
drivers/gpu/drm/i915/intel_guc_loader.c | 11 +++++++++++
drivers/gpu/drm/i915/intel_uc.h | 2 ++
4 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 57815edfc4df..97392e1c04d1 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -1370,7 +1370,6 @@ void i915_guc_submission_reenable_engine(struct intel_engine_cs *engine)
int intel_guc_suspend(struct drm_i915_private *dev_priv)
{
struct intel_guc *guc = &dev_priv->guc;
- struct i915_gem_context *ctx;
u32 data[3];
if (guc->fw.load_status != INTEL_UC_FIRMWARE_SUCCESS)
@@ -1378,13 +1377,11 @@ int intel_guc_suspend(struct drm_i915_private *dev_priv)
gen9_disable_guc_interrupts(dev_priv);
- ctx = dev_priv->kernel_context;
-
data[0] = INTEL_GUC_ACTION_ENTER_S_STATE;
/* any value greater than GUC_POWER_D0 */
data[1] = GUC_POWER_D1;
- /* first page is shared data with GuC */
- data[2] = guc_ggtt_offset(ctx->engine[RCS].state);
+ /* first page of default ctx is shared data with GuC */
+ data[2] = guc->shared_data_offset;
return intel_guc_send(guc, data, ARRAY_SIZE(data));
}
@@ -1396,7 +1393,6 @@ int intel_guc_suspend(struct drm_i915_private *dev_priv)
int intel_guc_resume(struct drm_i915_private *dev_priv)
{
struct intel_guc *guc = &dev_priv->guc;
- struct i915_gem_context *ctx;
u32 data[3];
if (guc->fw.load_status != INTEL_UC_FIRMWARE_SUCCESS)
@@ -1405,12 +1401,10 @@ int intel_guc_resume(struct drm_i915_private *dev_priv)
if (i915.guc_log_level >= 0)
gen9_enable_guc_interrupts(dev_priv);
- ctx = dev_priv->kernel_context;
-
data[0] = INTEL_GUC_ACTION_EXIT_S_STATE;
data[1] = GUC_POWER_D0;
- /* first page is shared data with GuC */
- data[2] = guc_ggtt_offset(ctx->engine[RCS].state);
+ /* first page of default ctx is shared data with GuC */
+ data[2] = guc->shared_data_offset;
return intel_guc_send(guc, data, ARRAY_SIZE(data));
}
@@ -1419,14 +1413,11 @@ int i915_guc_reset_engine(struct intel_engine_cs *engine)
{
struct drm_i915_private *dev_priv = engine->i915;
struct intel_guc *guc = &dev_priv->guc;
- struct i915_gem_context *ctx;
u32 data[7];
if (!i915.enable_guc_submission)
return 0;
- ctx = dev_priv->kernel_context;
-
/*
* The affected context report is populated by GuC and is provided
* to the driver using the shared page. We request for it but don't
@@ -1438,8 +1429,8 @@ int i915_guc_reset_engine(struct intel_engine_cs *engine)
data[3] = 0;
data[4] = 0;
data[5] = guc->execbuf_client->stage_id;
- /* first page is shared data with GuC */
- data[6] = guc_ggtt_offset(ctx->engine[RCS].state);
+ /* first page of default ctx is shared data with GuC */
+ data[6] = guc->shared_data_offset;
return intel_guc_send(guc, data, ARRAY_SIZE(data));
}
diff --git a/drivers/gpu/drm/i915/intel_guc_fwif.h b/drivers/gpu/drm/i915/intel_guc_fwif.h
index 081f2cf614e6..a2d0cba2f8b9 100644
--- a/drivers/gpu/drm/i915/intel_guc_fwif.h
+++ b/drivers/gpu/drm/i915/intel_guc_fwif.h
@@ -135,7 +135,7 @@
#define GUC_ADS_ADDR_SHIFT 11
#define GUC_ADS_ADDR_MASK 0xfffff800
-#define GUC_CTL_RSRVD 9
+#define GUC_CTL_SHARED_DATA 9
#define GUC_CTL_MAX_DWORDS (SOFT_SCRATCH_COUNT - 2) /* [1..14] */
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index d9045b6e897b..8cd5c2bf9510 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -108,6 +108,7 @@ static void guc_params_init(struct drm_i915_private *dev_priv)
{
struct intel_guc *guc = &dev_priv->guc;
u32 params[GUC_CTL_MAX_DWORDS];
+ struct i915_gem_context *ctx;
int i;
memset(¶ms, 0, sizeof(params));
@@ -156,6 +157,16 @@ static void guc_params_init(struct drm_i915_private *dev_priv)
params[GUC_CTL_FEATURE] &= ~GUC_CTL_DISABLE_SCHEDULER;
}
+ /*
+ * For watchdog / media reset, GuC must know the address of the shared
+ * data page, which is the first page of the default context.
+ * We will also use this page in several places (suspend/resume/reset),
+ * so save the ggtt offset.
+ */
+ ctx = dev_priv->kernel_context;
+ guc->shared_data_offset = guc_ggtt_offset(ctx->engine[RCS].state);
+ params[GUC_CTL_SHARED_DATA] = guc->shared_data_offset;
+
I915_WRITE(SOFT_SCRATCH(0), 0);
for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
index a348d08ce227..c686f20082d7 100644
--- a/drivers/gpu/drm/i915/intel_uc.h
+++ b/drivers/gpu/drm/i915/intel_uc.h
@@ -195,6 +195,8 @@ struct intel_guc {
DECLARE_BITMAP(doorbell_bitmap, GUC_NUM_DOORBELLS);
uint32_t db_cacheline; /* Cyclic counter mod pagesize */
+ uint32_t shared_data_offset; /* First page of default ctx */
+
/* Action status & statistics */
uint64_t action_count; /* Total commands issued */
uint32_t action_cmd; /* Last command word */
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-04-27 23:13 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-27 23:12 [PATCH v7 00/20] Gen8+ engine-reset Michel Thierry
2017-04-27 23:12 ` [PATCH v7 01/20] drm/i915: Update i915.reset to handle engine resets Michel Thierry
2017-04-27 23:12 ` [PATCH v7 02/20] drm/i915: Modify error handler for per engine hang recovery Michel Thierry
2017-04-29 14:19 ` Chris Wilson
2017-05-08 18:31 ` Michel Thierry
2017-05-12 20:55 ` Michel Thierry
2017-05-12 21:09 ` Chris Wilson
2017-05-12 21:23 ` Michel Thierry
2017-05-15 21:14 ` [PATCH " Michel Thierry
2017-04-27 23:12 ` [PATCH v7 03/20] drm/i915: Add support for per engine reset recovery Michel Thierry
2017-04-27 23:50 ` Chris Wilson
2017-04-28 21:59 ` Michel Thierry
2017-05-04 0:26 ` Michel Thierry
2017-05-15 21:18 ` [PATCH " Michel Thierry
2017-04-27 23:12 ` [PATCH v7 04/20] drm/i915: Skip reset request if there is one already Michel Thierry
2017-04-29 14:21 ` Chris Wilson
2017-05-01 21:15 ` Michel Thierry
2017-04-27 23:12 ` [PATCH v7 05/20] drm/i915: Cancel reset-engine if we couldn't find an active request Michel Thierry
2017-04-29 14:26 ` Chris Wilson
2017-05-15 21:20 ` [PATCH " Michel Thierry
2017-05-15 21:31 ` Chris Wilson
2017-05-15 21:47 ` Chris Wilson
2017-05-15 22:25 ` Michel Thierry
2017-05-16 7:54 ` Chris Wilson
2017-05-17 0:13 ` Michel Thierry
2017-05-17 7:19 ` Chris Wilson
2017-05-17 20:41 ` [PATCH] " Michel Thierry
2017-05-17 20:52 ` Chris Wilson
2017-05-18 1:11 ` Michel Thierry
2017-05-18 7:56 ` Chris Wilson
2017-05-18 17:19 ` Michel Thierry
2017-05-18 18:22 ` [PATCH] drm/i915: Look for active requests earlier in the reset path Michel Thierry
2017-05-18 18:26 ` Michel Thierry
2017-05-18 19:55 ` Chris Wilson
2017-05-18 21:11 ` Michel Thierry
2017-05-18 21:16 ` Chris Wilson
2017-05-18 21:34 ` Michel Thierry
2017-04-27 23:12 ` [PATCH v7 06/20] drm/i915: Add engine reset count to error state Michel Thierry
2017-04-27 23:12 ` [PATCH v7 07/20] drm/i915: Export per-engine reset count info to debugfs Michel Thierry
2017-04-27 23:12 ` [PATCH v7 08/20] drm/i915: Enable Engine reset and recovery support Michel Thierry
2017-04-27 23:12 ` [PATCH v7 09/20] drm/i915: Add engine reset count in get-reset-stats ioctl Michel Thierry
2017-04-27 23:12 ` [PATCH v7 10/20] drm/i915/selftests: reset engine self tests Michel Thierry
2017-04-27 23:12 ` [PATCH v7 11/20] drm/i915/guc: fix mmio whitelist mmio_start offset and add reminder Michel Thierry
2017-04-27 23:12 ` [PATCH v7 12/20] drm/i915/guc: Provide register list to be saved/restored during engine reset Michel Thierry
2017-04-27 23:58 ` Chris Wilson
2017-04-28 15:36 ` Michel Thierry
2017-04-27 23:12 ` [PATCH v7 13/20] drm/i915/guc: Rename the function that resets the GuC Michel Thierry
2017-04-28 7:40 ` Tvrtko Ursulin
2017-05-01 20:09 ` Michel Thierry
2017-04-27 23:12 ` [PATCH v7 14/20] drm/i915/guc: Add support for reset engine using GuC commands Michel Thierry
2017-04-27 23:12 ` Michel Thierry [this message]
2017-04-27 23:12 ` [PATCH v7 16/20] drm/i915: Watchdog timeout: IRQ handler for gen8+ Michel Thierry
2017-04-27 23:12 ` [PATCH v7 17/20] drm/i915: Watchdog timeout: Ringbuffer command emission " Michel Thierry
2017-04-27 23:12 ` [PATCH v7 18/20] drm/i915: Watchdog timeout: DRM kernel interface to set the timeout Michel Thierry
2017-04-27 23:12 ` [PATCH v7 19/20] drm/i915: Watchdog timeout: Include threshold value in error state Michel Thierry
2017-04-27 23:13 ` [PATCH v7 20/20] drm/i915: Watchdog timeout: Export media reset count from GuC to debugfs Michel Thierry
2017-04-27 23:30 ` ✓ Fi.CI.BAT: success for Gen8+ engine-reset (rev4) Patchwork
2017-05-15 21:32 ` ✓ Fi.CI.BAT: success for Gen8+ engine-reset (rev5) Patchwork
2017-05-15 21:48 ` ✓ Fi.CI.BAT: success for Gen8+ engine-reset (rev7) Patchwork
2017-05-17 21:09 ` ✓ Fi.CI.BAT: success for Gen8+ engine-reset (rev8) Patchwork
2017-05-18 18:40 ` ✓ Fi.CI.BAT: success for Gen8+ engine-reset (rev9) Patchwork
2017-05-18 21:29 ` ✓ Fi.CI.BAT: success for Gen8+ engine-reset (rev10) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170427231300.32841-16-michel.thierry@intel.com \
--to=michel.thierry@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox