From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: dhinakaran.pandiyan@intel.com
Subject: [PATCH 6/6] drm/i915/psr/hsw+: Enable CRC check in the static frame on the sink side
Date: Fri, 23 Feb 2018 18:03:11 -0800 [thread overview]
Message-ID: <20180224020311.14813-6-jose.souza@intel.com> (raw)
In-Reply-To: <20180224020311.14813-1-jose.souza@intel.com>
Sink can be configured to calculate the CRC over the static frame and
compare with the CRC calculated and transmited in the VSC SDP by
source, if there is a mismatch sink will do a short pulse in HPD
and set DP_PSR_LINK_CRC_ERROR on DP_PSR_ERROR_STATUS.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_psr.c | 15 +++++++--------
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f36e839b4b4f..ca68eef8d90a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4122,6 +4122,7 @@ enum {
#define EDP_PSR_SKIP_AUX_EXIT (1<<12)
#define EDP_PSR_TP1_TP2_SEL (0<<11)
#define EDP_PSR_TP1_TP3_SEL (1<<11)
+#define EDP_PSR_CRC_ENABLE (1<<10)
#define EDP_PSR_TP2_TP3_TIME_500us (0<<8)
#define EDP_PSR_TP2_TP3_TIME_100us (1<<8)
#define EDP_PSR_TP2_TP3_TIME_2500us (2<<8)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 4e73edf1ea5b..f6af8e8039c9 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -160,6 +160,7 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
enum port port = dig_port->base.port;
u32 aux_ctl;
int i;
+ uint8_t val;
BUILD_BUG_ON(sizeof(aux_msg) > 20);
@@ -175,12 +176,10 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_RECEIVER_ALPM_CONFIG,
DP_ALPM_ENABLE);
+ val = DP_PSR_ENABLE | DP_PSR_CRC_VERIFICATION;
if (dev_priv->psr.link_standby)
- drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
- DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
- else
- drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
- DP_PSR_ENABLE);
+ val |= DP_PSR_MAIN_LINK_ACTIVE;
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, val);
aux_ctl_reg = psr_aux_ctl_reg(dev_priv, port);
@@ -241,7 +240,7 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
* with the 5 or 6 idle patterns.
*/
uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
- uint32_t val = EDP_PSR_ENABLE;
+ uint32_t val = EDP_PSR_ENABLE | EDP_PSR_CRC_ENABLE;
val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT;
val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
@@ -1015,12 +1014,12 @@ void intel_psr_hpd_short_pulse_handle(struct intel_dp *intel_dp)
goto dpcd_read_error;
}
- if (val & DP_PSR_RFB_STORAGE_ERROR)
+ if (val & (DP_PSR_RFB_STORAGE_ERROR | DP_PSR_LINK_CRC_ERROR))
dev_priv->psr.exit(intel_dp, false);
/* clear status register */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ERROR_STATUS, val);
- /* TODO: handle other PSR/PSR2 errors */
+ /* TODO: handle PSR2 errors */
dpcd_read_error:
intel_psr_active_schedule(psr, PSR_ACTIVE_DELAY_MSEC);
out:
--
2.16.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-02-24 2:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-24 2:03 [PATCH 1/6] drm/i915/skl+: Add and enable DP AUX CH mutex José Roberto de Souza
2018-02-24 2:03 ` [PATCH 2/6] drm/i915/psr: Share the common code between PSR exit and disable José Roberto de Souza
2018-02-24 2:03 ` [PATCH 3/6] drm/i915: Exit PSR before do a aux transaction in gen < 9 José Roberto de Souza
2018-02-27 20:35 ` Pandiyan, Dhinakaran
2018-02-24 2:03 ` [PATCH 4/6] drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink José Roberto de Souza
2018-02-24 2:03 ` [PATCH 5/6] drm/i915/psr: Handle PSR RFB storage error José Roberto de Souza
2018-02-24 2:03 ` José Roberto de Souza [this message]
2018-02-24 2:42 ` ✗ Fi.CI.BAT: failure for series starting with [1/6] drm/i915/skl+: Add and enable DP AUX CH mutex Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180224020311.14813-6-jose.souza@intel.com \
--to=jose.souza@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox