* [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind
@ 2018-04-14 9:12 Chris Wilson
2018-04-14 9:18 ` ✗ Fi.CI.BAT: failure for " Patchwork
` (4 more replies)
0 siblings, 5 replies; 8+ messages in thread
From: Chris Wilson @ 2018-04-14 9:12 UTC (permalink / raw)
To: intel-gfx; +Cc: Matthew Auld
We have to cleanup after i915_perf_init(), even on the error path, as it
passes a pointer into the module to the sysfs core. If we fail to
unregister the sysctl table, we leave a dangling pointer which then may
explode anytime later the sysctl table, we leave a dangling pointer
which then may explode anytime later.
Fixes: 9f9b2792b6d3 ("drm/i915/perf: reuse timestamp frequency from device info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 9944a03cdea6..beac565ddfe0 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1109,30 +1109,30 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
ret = i915_ggtt_probe_hw(dev_priv);
if (ret)
- return ret;
+ goto err_perf;
/* WARNING: Apparently we must kick fbdev drivers before vgacon,
* otherwise the vga fbdev driver falls over. */
ret = i915_kick_out_firmware_fb(dev_priv);
if (ret) {
DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
- goto out_ggtt;
+ goto err_ggtt;
}
ret = i915_kick_out_vgacon(dev_priv);
if (ret) {
DRM_ERROR("failed to remove conflicting VGA console\n");
- goto out_ggtt;
+ goto err_ggtt;
}
ret = i915_ggtt_init_hw(dev_priv);
if (ret)
- return ret;
+ goto err_ggtt;
ret = i915_ggtt_enable_hw(dev_priv);
if (ret) {
DRM_ERROR("failed to enable GGTT\n");
- goto out_ggtt;
+ goto err_ggtt;
}
pci_set_master(pdev);
@@ -1143,7 +1143,7 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
if (ret) {
DRM_ERROR("failed to set DMA mask\n");
- goto out_ggtt;
+ goto err_ggtt;
}
}
@@ -1161,7 +1161,7 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
if (ret) {
DRM_ERROR("failed to set DMA mask\n");
- goto out_ggtt;
+ goto err_ggtt;
}
}
@@ -1197,13 +1197,14 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
ret = intel_gvt_init(dev_priv);
if (ret)
- goto out_ggtt;
+ goto err_ggtt;
return 0;
-out_ggtt:
+err_ggtt:
i915_ggtt_cleanup_hw(dev_priv);
-
+err_perf:
+ i915_perf_fini(dev_priv);
return ret;
}
--
2.17.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 8+ messages in thread* ✗ Fi.CI.BAT: failure for drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 9:12 [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind Chris Wilson
@ 2018-04-14 9:18 ` Patchwork
2018-04-14 15:28 ` Arkadiusz Hiler
2018-04-14 15:40 ` [PATCH] " Lionel Landwerlin
` (3 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Patchwork @ 2018-04-14 9:18 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: drm/i915: Call i915_perf_fini() on init_hw error unwind
URL : https://patchwork.freedesktop.org/series/41711/
State : failure
== Summary ==
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
CHK include/generated/bounds.h
CHK include/generated/timeconst.h
CHK include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
DESCEND objtool
CHK scripts/mod/devicetable-offsets.h
CHK include/generated/compile.h
CHK kernel/config_data.h
CHK include/generated/uapi/linux/version.h
DATAREL arch/x86/boot/compressed/vmlinux
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
objcopy:arch/x86/boot/vmlinux.bin[.rodata..compressed]: No space left on device
arch/x86/boot/Makefile:86: recipe for target 'arch/x86/boot/vmlinux.bin' failed
make[1]: *** [arch/x86/boot/vmlinux.bin] Error 1
arch/x86/Makefile:307: recipe for target 'bzImage' failed
make: *** [bzImage] Error 2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: ✗ Fi.CI.BAT: failure for drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 9:18 ` ✗ Fi.CI.BAT: failure for " Patchwork
@ 2018-04-14 15:28 ` Arkadiusz Hiler
0 siblings, 0 replies; 8+ messages in thread
From: Arkadiusz Hiler @ 2018-04-14 15:28 UTC (permalink / raw)
To: intel-gfx
On Sat, Apr 14, 2018 at 09:18:52AM +0000, Patchwork wrote:
> == Series Details ==
>
> Series: drm/i915: Call i915_perf_fini() on init_hw error unwind
> URL : https://patchwork.freedesktop.org/series/41711/
> State : failure
>
> == Summary ==
>
> CHK include/config/kernel.release
> CHK include/generated/uapi/linux/version.h
> CHK include/generated/utsrelease.h
> CHK include/generated/bounds.h
> CHK include/generated/timeconst.h
> CHK include/generated/asm-offsets.h
> CALL scripts/checksyscalls.sh
> DESCEND objtool
> CHK scripts/mod/devicetable-offsets.h
> CHK include/generated/compile.h
> CHK kernel/config_data.h
> CHK include/generated/uapi/linux/version.h
> DATAREL arch/x86/boot/compressed/vmlinux
> LD arch/x86/boot/setup.elf
> OBJCOPY arch/x86/boot/setup.bin
> OBJCOPY arch/x86/boot/vmlinux.bin
> objcopy:arch/x86/boot/vmlinux.bin[.rodata..compressed]: No space left on device
> arch/x86/boot/Makefile:86: recipe for target 'arch/x86/boot/vmlinux.bin' failed
> make[1]: *** [arch/x86/boot/vmlinux.bin] Error 1
> arch/x86/Makefile:307: recipe for target 'bzImage' failed
> make: *** [bzImage] Error 2
Whoops. Reclaimed some space, rerun queued.
-Arek
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 9:12 [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind Chris Wilson
2018-04-14 9:18 ` ✗ Fi.CI.BAT: failure for " Patchwork
@ 2018-04-14 15:40 ` Lionel Landwerlin
2018-04-14 15:59 ` Michal Wajdeczko
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Lionel Landwerlin @ 2018-04-14 15:40 UTC (permalink / raw)
To: Chris Wilson, intel-gfx; +Cc: Matthew Auld
On 14/04/18 02:12, Chris Wilson wrote:
> We have to cleanup after i915_perf_init(), even on the error path, as it
> passes a pointer into the module to the sysfs core. If we fail to
> unregister the sysctl table, we leave a dangling pointer which then may
> explode anytime later the sysctl table, we leave a dangling pointer
> which then may explode anytime later.
>
> Fixes: 9f9b2792b6d3 ("drm/i915/perf: reuse timestamp frequency from device info")
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
> Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Thanks a lot!
> ---
> drivers/gpu/drm/i915/i915_drv.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 9944a03cdea6..beac565ddfe0 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -1109,30 +1109,30 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
>
> ret = i915_ggtt_probe_hw(dev_priv);
> if (ret)
> - return ret;
> + goto err_perf;
>
> /* WARNING: Apparently we must kick fbdev drivers before vgacon,
> * otherwise the vga fbdev driver falls over. */
> ret = i915_kick_out_firmware_fb(dev_priv);
> if (ret) {
> DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
>
> ret = i915_kick_out_vgacon(dev_priv);
> if (ret) {
> DRM_ERROR("failed to remove conflicting VGA console\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
>
> ret = i915_ggtt_init_hw(dev_priv);
> if (ret)
> - return ret;
> + goto err_ggtt;
>
> ret = i915_ggtt_enable_hw(dev_priv);
> if (ret) {
> DRM_ERROR("failed to enable GGTT\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
>
> pci_set_master(pdev);
> @@ -1143,7 +1143,7 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
> if (ret) {
> DRM_ERROR("failed to set DMA mask\n");
>
> - goto out_ggtt;
> + goto err_ggtt;
> }
> }
>
> @@ -1161,7 +1161,7 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
> if (ret) {
> DRM_ERROR("failed to set DMA mask\n");
>
> - goto out_ggtt;
> + goto err_ggtt;
> }
> }
>
> @@ -1197,13 +1197,14 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
>
> ret = intel_gvt_init(dev_priv);
> if (ret)
> - goto out_ggtt;
> + goto err_ggtt;
>
> return 0;
>
> -out_ggtt:
> +err_ggtt:
> i915_ggtt_cleanup_hw(dev_priv);
> -
> +err_perf:
> + i915_perf_fini(dev_priv);
> return ret;
> }
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 9:12 [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind Chris Wilson
2018-04-14 9:18 ` ✗ Fi.CI.BAT: failure for " Patchwork
2018-04-14 15:40 ` [PATCH] " Lionel Landwerlin
@ 2018-04-14 15:59 ` Michal Wajdeczko
2018-04-17 13:53 ` Chris Wilson
2018-04-14 16:28 ` ✓ Fi.CI.BAT: success for " Patchwork
2018-04-14 17:43 ` ✓ Fi.CI.IGT: " Patchwork
4 siblings, 1 reply; 8+ messages in thread
From: Michal Wajdeczko @ 2018-04-14 15:59 UTC (permalink / raw)
To: intel-gfx, Chris Wilson; +Cc: Matthew Auld
On Sat, 14 Apr 2018 11:12:33 +0200, Chris Wilson
<chris@chris-wilson.co.uk> wrote:
> We have to cleanup after i915_perf_init(), even on the error path, as it
> passes a pointer into the module to the sysfs core. If we fail to
> unregister the sysctl table, we leave a dangling pointer which then may
> explode anytime later the sysctl table, we leave a dangling pointer
> which then may explode anytime later.
no need to repeat, we're smart enough to get it after first time ;)
>
> Fixes: 9f9b2792b6d3 ("drm/i915/perf: reuse timestamp frequency from
> device info")
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
> Cc: Matthew Auld <matthew.auld@intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c
> b/drivers/gpu/drm/i915/i915_drv.c
> index 9944a03cdea6..beac565ddfe0 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -1109,30 +1109,30 @@ static int i915_driver_init_hw(struct
> drm_i915_private *dev_priv)
> ret = i915_ggtt_probe_hw(dev_priv);
> if (ret)
> - return ret;
> + goto err_perf;
> /* WARNING: Apparently we must kick fbdev drivers before vgacon,
> * otherwise the vga fbdev driver falls over. */
btw, as you're doing labels cleanup, maybe you can also fix above comment
to follow multi-line style?
> ret = i915_kick_out_firmware_fb(dev_priv);
> if (ret) {
> DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
> ret = i915_kick_out_vgacon(dev_priv);
> if (ret) {
> DRM_ERROR("failed to remove conflicting VGA console\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
> ret = i915_ggtt_init_hw(dev_priv);
> if (ret)
> - return ret;
> + goto err_ggtt;
> ret = i915_ggtt_enable_hw(dev_priv);
> if (ret) {
> DRM_ERROR("failed to enable GGTT\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
> pci_set_master(pdev);
> @@ -1143,7 +1143,7 @@ static int i915_driver_init_hw(struct
> drm_i915_private *dev_priv)
> if (ret) {
> DRM_ERROR("failed to set DMA mask\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
> }
> @@ -1161,7 +1161,7 @@ static int i915_driver_init_hw(struct
> drm_i915_private *dev_priv)
> if (ret) {
> DRM_ERROR("failed to set DMA mask\n");
> - goto out_ggtt;
> + goto err_ggtt;
> }
> }
> @@ -1197,13 +1197,14 @@ static int i915_driver_init_hw(struct
> drm_i915_private *dev_priv)
> ret = intel_gvt_init(dev_priv);
> if (ret)
> - goto out_ggtt;
> + goto err_ggtt;
> return 0;
> -out_ggtt:
> +err_ggtt:
> i915_ggtt_cleanup_hw(dev_priv);
> -
> +err_perf:
> + i915_perf_fini(dev_priv);
> return ret;
> }
>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 15:59 ` Michal Wajdeczko
@ 2018-04-17 13:53 ` Chris Wilson
0 siblings, 0 replies; 8+ messages in thread
From: Chris Wilson @ 2018-04-17 13:53 UTC (permalink / raw)
To: Michal Wajdeczko, intel-gfx; +Cc: Matthew Auld
Quoting Michal Wajdeczko (2018-04-14 16:59:13)
> On Sat, 14 Apr 2018 11:12:33 +0200, Chris Wilson
> <chris@chris-wilson.co.uk> wrote:
>
> > We have to cleanup after i915_perf_init(), even on the error path, as it
> > passes a pointer into the module to the sysfs core. If we fail to
> > unregister the sysctl table, we leave a dangling pointer which then may
> > explode anytime later the sysctl table, we leave a dangling pointer
> > which then may explode anytime later.
>
> no need to repeat, we're smart enough to get it after first time ;)
Smarter than me for sure, I didn't even notice I hit '.' too late.
Fixed up the commitmsg and old comment style, and pushed (and forgot to
say I pushed). Thanks all for the review,
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread
* ✓ Fi.CI.BAT: success for drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 9:12 [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind Chris Wilson
` (2 preceding siblings ...)
2018-04-14 15:59 ` Michal Wajdeczko
@ 2018-04-14 16:28 ` Patchwork
2018-04-14 17:43 ` ✓ Fi.CI.IGT: " Patchwork
4 siblings, 0 replies; 8+ messages in thread
From: Patchwork @ 2018-04-14 16:28 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: drm/i915: Call i915_perf_fini() on init_hw error unwind
URL : https://patchwork.freedesktop.org/series/41711/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4053 -> Patchwork_8692 =
== Summary - WARNING ==
Minor unknown changes coming with Patchwork_8692 need to be verified
manually.
If you think the reported changes have nothing to do with the changes
introduced in Patchwork_8692, please notify your bug team to allow them
to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/41711/revisions/1/mbox/
== Possible new issues ==
Here are the unknown changes that may have been introduced in Patchwork_8692:
=== IGT changes ===
==== Warnings ====
igt@gem_exec_gttfill@basic:
fi-pnv-d510: PASS -> SKIP
== Known issues ==
Here are the changes found in Patchwork_8692 that come from known issues:
=== IGT changes ===
==== Issues hit ====
igt@gem_ctx_param@basic-default:
fi-cnl-y3: PASS -> INCOMPLETE (fdo#105086)
igt@gem_mmap_gtt@basic-small-bo-tiledx:
fi-gdg-551: PASS -> FAIL (fdo#102575)
igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
fi-snb-2520m: NOTRUN -> INCOMPLETE (fdo#103713)
igt@prime_vgem@basic-fence-flip:
fi-ilk-650: PASS -> FAIL (fdo#104008)
==== Possible fixes ====
igt@debugfs_test@read_all_entries:
fi-snb-2520m: INCOMPLETE (fdo#103713) -> PASS
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fdo#105086 https://bugs.freedesktop.org/show_bug.cgi?id=105086
== Participating hosts (35 -> 33) ==
Missing (2): fi-ilk-m540 fi-skl-6700hq
== Build changes ==
* Linux: CI_DRM_4053 -> Patchwork_8692
CI_DRM_4053: e2599f775a9c1c27f702e90e6432e555764edcd8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4429: 80e4910581c7310258375a003a5de9a57ed24546 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8692: 57932c0fb665721baa95aeac11ef747a68cbbd65 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4429: 93b35926a150e318439d2505901288594b3548f5 @ git://anongit.freedesktop.org/piglit
== Linux commits ==
57932c0fb665 drm/i915: Call i915_perf_fini() on init_hw error unwind
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8692/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread* ✓ Fi.CI.IGT: success for drm/i915: Call i915_perf_fini() on init_hw error unwind
2018-04-14 9:12 [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind Chris Wilson
` (3 preceding siblings ...)
2018-04-14 16:28 ` ✓ Fi.CI.BAT: success for " Patchwork
@ 2018-04-14 17:43 ` Patchwork
4 siblings, 0 replies; 8+ messages in thread
From: Patchwork @ 2018-04-14 17:43 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: drm/i915: Call i915_perf_fini() on init_hw error unwind
URL : https://patchwork.freedesktop.org/series/41711/
State : success
== Summary ==
= CI Bug Log - changes from CI_DRM_4053_full -> Patchwork_8692_full =
== Summary - SUCCESS ==
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/41711/revisions/1/mbox/
== Known issues ==
Here are the changes found in Patchwork_8692_full that come from known issues:
=== IGT changes ===
==== Possible fixes ====
igt@kms_setmode@basic:
shard-kbl: FAIL (fdo#99912) -> PASS
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
== Participating hosts (6 -> 4) ==
Missing (2): shard-glk shard-glkb
== Build changes ==
* Linux: CI_DRM_4053 -> Patchwork_8692
CI_DRM_4053: e2599f775a9c1c27f702e90e6432e555764edcd8 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4429: 80e4910581c7310258375a003a5de9a57ed24546 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_8692: 57932c0fb665721baa95aeac11ef747a68cbbd65 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4429: 93b35926a150e318439d2505901288594b3548f5 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8692/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-04-17 13:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-14 9:12 [PATCH] drm/i915: Call i915_perf_fini() on init_hw error unwind Chris Wilson
2018-04-14 9:18 ` ✗ Fi.CI.BAT: failure for " Patchwork
2018-04-14 15:28 ` Arkadiusz Hiler
2018-04-14 15:40 ` [PATCH] " Lionel Landwerlin
2018-04-14 15:59 ` Michal Wajdeczko
2018-04-17 13:53 ` Chris Wilson
2018-04-14 16:28 ` ✓ Fi.CI.BAT: success for " Patchwork
2018-04-14 17:43 ` ✓ Fi.CI.IGT: " Patchwork
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox