From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 21/28] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs
Date: Fri, 5 Oct 2018 16:22:59 -0700 [thread overview]
Message-ID: <20181005232306.31133-22-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181005232306.31133-1-manasi.d.navare@intel.com>
Infoframes are used to send secondary data packets. This patch
adds support for DSC Picture parameter set secondary data packets
in the existing write_infoframe helpers.
v2:
* Rebase on drm-tip (Manasi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_hdmi.c | 23 +++++++++++++++++++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 90527b038ed1..5b95369f9b8f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4565,6 +4565,7 @@ enum {
* of the infoframe structure specified by CEA-861. */
#define VIDEO_DIP_DATA_SIZE 32
#define VIDEO_DIP_VSC_DATA_SIZE 36
+#define VIDEO_DIP_PPS_DATA_SIZE 132
#define VIDEO_DIP_CTL _MMIO(0x61170)
/* Pre HSW: */
#define VIDEO_DIP_ENABLE (1 << 31)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 454f570275e9..325b842dc9ce 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -115,6 +115,8 @@ static u32 hsw_infoframe_enable(unsigned int type)
switch (type) {
case DP_SDP_VSC:
return VIDEO_DIP_ENABLE_VSC_HSW;
+ case DP_SDP_PPS:
+ return VDIP_ENABLE_PPS;
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_ENABLE_AVI_HSW;
case HDMI_INFOFRAME_TYPE_SPD:
@@ -136,6 +138,8 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
switch (type) {
case DP_SDP_VSC:
return HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder, i);
+ case DP_SDP_PPS:
+ return ICL_VIDEO_DIP_PPS_DATA(cpu_transcoder, i);
case HDMI_INFOFRAME_TYPE_AVI:
return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i);
case HDMI_INFOFRAME_TYPE_SPD:
@@ -148,6 +152,18 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
}
}
+static int hsw_dip_data_size(unsigned int type)
+{
+ switch (type) {
+ case DP_SDP_VSC:
+ return VIDEO_DIP_VSC_DATA_SIZE;
+ case DP_SDP_PPS:
+ return VIDEO_DIP_PPS_DATA_SIZE;
+ default:
+ return VIDEO_DIP_DATA_SIZE;
+ }
+}
+
static void g4x_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
@@ -382,11 +398,14 @@ static void hsw_write_infoframe(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
- int data_size = type == DP_SDP_VSC ?
- VIDEO_DIP_VSC_DATA_SIZE : VIDEO_DIP_DATA_SIZE;
+ i915_reg_t data_reg;
+ int data_size = 0;
int i;
u32 val = I915_READ(ctl_reg);
+ data_size = hsw_dip_data_size(type);
+ data_reg = hsw_dip_data_reg(dev_priv, cpu_transcoder, type, 0);
+
val &= ~hsw_infoframe_enable(type);
I915_WRITE(ctl_reg, val);
--
2.18.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-05 23:22 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 23:22 [PATCH v5 00/28] Display Stream Compression enabling on eDP/DP Manasi Navare
2018-10-05 23:22 ` [PATCH v5 01/28] drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming Manasi Navare
2018-10-05 23:22 ` [PATCH v5 02/28] drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT Manasi Navare
2018-10-05 23:22 ` [PATCH v5 03/28] drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init Manasi Navare
2018-10-05 23:22 ` [PATCH v5 04/28] drm/dp: DRM DP helper/macros to get DP sink DSC parameters Manasi Navare
2018-10-05 23:22 ` [PATCH v5 05/28] drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC Manasi Navare
2018-10-05 23:22 ` [PATCH v5 06/28] drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported Manasi Navare
2018-10-05 23:22 ` [PATCH v5 07/28] drm/dp: Define payload size for DP SDP PPS packet Manasi Navare
2018-10-05 23:22 ` [PATCH v5 08/28] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-10-05 23:22 ` [PATCH v5 09/28] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-10-05 23:22 ` [PATCH v5 10/28] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-10-05 23:22 ` [PATCH v5 11/28] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-10-16 1:27 ` Manasi Navare
2018-10-05 23:22 ` [PATCH v5 12/28] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-10-05 23:22 ` [PATCH v5 13/28] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-10-16 1:29 ` Manasi Navare
2018-10-22 23:53 ` Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 14/28] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-10-05 23:22 ` [PATCH v5 15/28] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-10-22 22:04 ` [Intel-gfx] " Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 16/28] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-10-16 1:31 ` Manasi Navare
2018-10-22 22:26 ` Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 17/28] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-10-22 23:34 ` Srivatsa, Anusha
2018-10-23 18:42 ` Manasi Navare
2018-10-23 18:45 ` Srivatsa, Anusha
2018-10-05 23:22 ` [PATCH v5 18/28] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-10-22 18:50 ` Manasi Navare
2018-10-05 23:22 ` [PATCH v5 19/28] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-10-16 1:22 ` Manasi Navare
2018-10-16 19:01 ` Ville Syrjälä
2018-10-16 19:19 ` Ville Syrjälä
2018-10-16 19:42 ` Manasi Navare
2018-10-16 19:45 ` Ville Syrjälä
2018-10-16 21:04 ` Manasi Navare
2018-10-16 21:21 ` [Intel-gfx] " Manasi Navare
2018-10-16 19:19 ` Manasi Navare
2018-10-16 19:33 ` Ville Syrjälä
2018-10-05 23:22 ` [PATCH v5 20/28] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-10-16 19:58 ` Srivatsa, Anusha
2018-10-16 21:02 ` Manasi Navare
2018-10-17 16:58 ` Srivatsa, Anusha
2018-10-05 23:22 ` Manasi Navare [this message]
2018-10-05 23:23 ` [PATCH v5 22/28] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-10-05 23:23 ` [PATCH v5 23/28] drm/i915/icl: Add Display Stream Splitter control registers Manasi Navare
2018-10-05 23:23 ` [PATCH v5 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-10-18 17:02 ` Ville Syrjälä
2018-10-19 22:40 ` Manasi Navare
2018-10-05 23:23 ` [PATCH v5 25/28] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-10-05 23:23 ` [PATCH v5 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-10-16 1:23 ` Manasi Navare
2018-10-16 19:31 ` Ville Syrjälä
2018-10-05 23:23 ` [PATCH v5 27/28] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-10-05 23:34 ` Lyude Paul
2018-10-09 22:20 ` Manasi Navare
2018-10-09 22:24 ` Lyude Paul
2018-10-05 23:23 ` [PATCH v5 28/28] drm/i915/dsc: Force DSC enable if requested by IGT/userspace Manasi Navare
2018-10-24 17:51 ` Srivatsa, Anusha
2018-10-06 0:21 ` ✗ Fi.CI.CHECKPATCH: warning for Display Stream Compression enabling on eDP/DP (rev5) Patchwork
2018-10-06 0:31 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-06 0:45 ` ✗ Fi.CI.BAT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181005232306.31133-22-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox