From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 05/10] drm/i915: Extract icl_color_check()
Date: Mon, 18 Mar 2019 18:13:12 +0200 [thread overview]
Message-ID: <20190318161317.30918-6-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20190318161317.30918-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
ICL is rather easy when it comes to .color_check() as it
finally provides us with a full color pipeline with
individual knobs for each stage.
We'll also start bypassing each LUT individually when
it is not needed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/intel_color.c | 70 ++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index cb88651f1da4..86580541b0da 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -871,6 +871,55 @@ static int chv_color_check(struct intel_crtc_state *crtc_state)
return 0;
}
+static u32 icl_gamma_mode(const struct intel_crtc_state *crtc_state)
+{
+ u32 gamma_mode = 0;
+
+ if (crtc_state->base.degamma_lut)
+ gamma_mode |= PRE_CSC_GAMMA_ENABLE;
+
+ if (crtc_state->base.gamma_lut &&
+ !crtc_state->c8_planes)
+ gamma_mode |= POST_CSC_GAMMA_ENABLE;
+
+ if (!crtc_state->base.gamma_lut ||
+ crtc_state_is_legacy_gamma(crtc_state))
+ gamma_mode |= GAMMA_MODE_MODE_8BIT;
+ else
+ gamma_mode |= GAMMA_MODE_MODE_10BIT;
+
+ return gamma_mode;
+}
+
+static u32 icl_csc_mode(const struct intel_crtc_state *crtc_state)
+{
+ u32 csc_mode = 0;
+
+ if (crtc_state->base.ctm)
+ csc_mode |= ICL_CSC_ENABLE;
+
+ if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB ||
+ crtc_state->limited_color_range)
+ csc_mode |= ICL_OUTPUT_CSC_ENABLE;
+
+ return csc_mode;
+}
+
+static int icl_color_check(struct intel_crtc_state *crtc_state)
+{
+ int ret;
+
+ ret = check_luts(crtc_state);
+ if (ret)
+ return ret;
+
+ crtc_state->gamma_mode = icl_gamma_mode(crtc_state);
+
+ crtc_state->csc_mode = icl_csc_mode(crtc_state);
+
+ return 0;
+}
+
static int _intel_color_check(struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
@@ -903,10 +952,6 @@ static int _intel_color_check(struct intel_crtc_state *crtc_state)
if (!crtc_state->gamma_enable ||
crtc_state_is_legacy_gamma(crtc_state))
crtc_state->gamma_mode = GAMMA_MODE_MODE_8BIT;
- else if (INTEL_GEN(dev_priv) >= 11)
- crtc_state->gamma_mode = GAMMA_MODE_MODE_10BIT |
- PRE_CSC_GAMMA_ENABLE |
- POST_CSC_GAMMA_ENABLE;
else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
crtc_state->gamma_mode = GAMMA_MODE_MODE_10BIT;
else if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
@@ -914,18 +959,6 @@ static int _intel_color_check(struct intel_crtc_state *crtc_state)
else
crtc_state->gamma_mode = GAMMA_MODE_MODE_8BIT;
- if (INTEL_GEN(dev_priv) >= 11) {
- if (crtc_state->gamma_enable)
- crtc_state->gamma_mode |= POST_CSC_GAMMA_ENABLE;
-
- if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB ||
- crtc_state->limited_color_range)
- crtc_state->csc_mode |= ICL_OUTPUT_CSC_ENABLE;
-
- if (crtc_state->base.ctm)
- crtc_state->csc_mode |= ICL_CSC_ENABLE;
- }
-
return 0;
}
@@ -962,7 +995,10 @@ void intel_color_init(struct intel_crtc *crtc)
else
dev_priv->display.color_commit = ilk_color_commit;
- dev_priv->display.color_check = _intel_color_check;
+ if (INTEL_GEN(dev_priv) >= 11)
+ dev_priv->display.color_check = icl_color_check;
+ else
+ dev_priv->display.color_check = _intel_color_check;
}
/* Enable color management support when we have degamma & gamma LUTs. */
--
2.19.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-03-18 16:13 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-18 16:13 [PATCH 00/10] drm/i915: Clean up intel_color_check() Ville Syrjala
2019-03-18 16:13 ` [PATCH 01/10] drm/i915: Extract check_luts() Ville Syrjala
2019-03-19 16:24 ` Jani Nikula
2019-03-20 14:46 ` Ville Syrjälä
2019-03-19 21:59 ` Matt Roper
2019-03-20 14:41 ` Ville Syrjälä
2019-03-20 15:14 ` Matt Roper
2019-03-20 15:31 ` Ville Syrjälä
2019-03-20 22:48 ` Matt Roper
2019-03-18 16:13 ` [PATCH 02/10] drm/i915: Turn intel_color_check() into a vfunc Ville Syrjala
2019-03-19 21:59 ` Matt Roper
2019-03-18 16:13 ` [PATCH 03/10] drm/i915: Extract i9xx_color_check() Ville Syrjala
2019-03-19 22:00 ` Matt Roper
2019-03-18 16:13 ` [PATCH 04/10] drm/i915: Extract chv_color_check() Ville Syrjala
2019-03-19 22:00 ` Matt Roper
2019-03-20 14:43 ` Ville Syrjälä
2019-03-18 16:13 ` Ville Syrjala [this message]
2019-03-18 16:13 ` [PATCH 06/10] drm/i915: Extract glk_color_check() Ville Syrjala
2019-03-18 16:13 ` [PATCH 07/10] drm/i915: Extract bdw_color_check() Ville Syrjala
2019-03-20 22:49 ` Matt Roper
2019-03-18 16:13 ` [PATCH 08/10] drm/i915: Extract ilk_color_check() Ville Syrjala
2019-03-20 22:49 ` Matt Roper
2019-03-21 10:05 ` Ville Syrjälä
2019-03-18 16:13 ` [PATCH 09/10] drm/i915: Drop the pointless linear legacy LUT load on CHV Ville Syrjala
2019-03-20 22:50 ` Matt Roper
2019-03-18 16:13 ` [PATCH 10/10] drm/i915: Skip the linear degamma LUT load on ICL+ Ville Syrjala
2019-03-20 22:50 ` Matt Roper
2019-03-18 20:15 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Clean up intel_color_check() Patchwork
2019-03-18 20:41 ` ✓ Fi.CI.BAT: success " Patchwork
2019-03-19 9:01 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-03-19 16:26 ` [PATCH 00/10] " Jani Nikula
2019-03-19 16:31 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190318161317.30918-6-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox