[PATCH v10 2/6] drm/i915/tgl: Add DC3CO mask to allowed_dc_mask and gen9_dc_mask

[Anshuman Gupta <anshuman.gupta@intel.com>]

Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.

v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
    independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../drm/i915/display/intel_display_power.c    | 29 +++++++++++++++----
 drivers/gpu/drm/i915/i915_params.c            |  3 +-
 2 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index f1186bc23542..0b685c517bcb 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -711,7 +711,11 @@ static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
 	u32 mask;
 
 	mask = DC_STATE_EN_UPTO_DC5;
-	if (INTEL_GEN(dev_priv) >= 11)
+
+	if (INTEL_GEN(dev_priv) >= 12)
+		mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6
+					  | DC_STATE_EN_DC9;
+	else if (IS_GEN(dev_priv, 11))
 		mask |= DC_STATE_EN_UPTO_DC6 | DC_STATE_EN_DC9;
 	else if (IS_GEN9_LP(dev_priv))
 		mask |= DC_STATE_EN_DC9;
@@ -3940,14 +3944,17 @@ static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
 	int requested_dc;
 	int max_dc;
 
-	if (INTEL_GEN(dev_priv) >= 11) {
-		max_dc = 2;
+	if (INTEL_GEN(dev_priv) >= 12) {
+		max_dc = 4;
 		/*
 		 * DC9 has a separate HW flow from the rest of the DC states,
 		 * not depending on the DMC firmware. It's needed by system
 		 * suspend/resume, so allow it unconditionally.
 		 */
 		mask = DC_STATE_EN_DC9;
+	} else if (IS_GEN(dev_priv, 11)) {
+		max_dc = 2;
+		mask = DC_STATE_EN_DC9;
 	} else if (IS_GEN(dev_priv, 10) || IS_GEN9_BC(dev_priv)) {
 		max_dc = 2;
 		mask = 0;
@@ -3966,7 +3973,7 @@ static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
 		requested_dc = enable_dc;
 	} else if (enable_dc == -1) {
 		requested_dc = max_dc;
-	} else if (enable_dc > max_dc && enable_dc <= 2) {
+	} else if (enable_dc > max_dc && enable_dc <= 4) {
 		DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n",
 			      enable_dc, max_dc);
 		requested_dc = max_dc;
@@ -3975,10 +3982,20 @@ static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
 		requested_dc = max_dc;
 	}
 
-	if (requested_dc > 1)
+	switch (requested_dc) {
+	case 4:
+		mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6;
+		break;
+	case 3:
+		mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC5;
+		break;
+	case 2:
 		mask |= DC_STATE_EN_UPTO_DC6;
-	if (requested_dc > 0)
+		break;
+	case 1:
 		mask |= DC_STATE_EN_UPTO_DC5;
+		break;
+	}
 
 	DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask);
 
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index 296452f9efe4..4f1806f65040 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -46,7 +46,8 @@ i915_param_named(modeset, int, 0400,
 
 i915_param_named_unsafe(enable_dc, int, 0400,
 	"Enable power-saving display C-states. "
-	"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
+	"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; "
+	"3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)");
 
 i915_param_named_unsafe(enable_fbc, int, 0600,
 	"Enable frame buffer compression for power savings "
-- 
2.21.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx