From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ramalingam C <ramalingam.c@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 9/9] drm/i915: Stop using connector->encoder and encoder->crtc links in i915_display_info
Date: Mon, 2 Dec 2019 18:24:56 +0200 [thread overview]
Message-ID: <20191202162456.GI1208@intel.com> (raw)
In-Reply-To: <20191202154008.GG15371@intel.com>
On Mon, Dec 02, 2019 at 09:10:08PM +0530, Ramalingam C wrote:
> On 2019-11-29 at 20:54:34 +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Migrate away from the legacy encoder->crtc and connector->encoder links
> > in the debugfs display_info code. Other users still remain so can't kill
> > these off yet.
> May be I missed why we want to kill encoder->crtc and conn->encoder.
> If you dont mind please explain the reasoning.
They are pre-atomic legacy state. With atomic everything should be
tracked in crtc_state/etc. instead. These things are being updated
in the middle of commit_tail() so any use during atomic_check() must
already be considered a bug. So I want to eliminate them completely
mainly to stop people from using them in new code out of ignorance.
Fortunately it doesn't look like this will be as difficult as I
originally feared.
>
> Apart from that the implementation looks good to me.
>
> Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.h | 7 ++++
> > drivers/gpu/drm/i915/i915_debugfs.c | 43 ++++++++++++--------
> > 2 files changed, 34 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index a5ec5eeff056..5ed716a986ad 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -380,6 +380,13 @@ enum phy_fia {
> > &(dev)->mode_config.encoder_list, \
> > base.head)
> >
> > +#define for_each_intel_encoder_mask(dev, intel_encoder, encoder_mask) \
> > + list_for_each_entry(intel_encoder, \
> > + &(dev)->mode_config.encoder_list, \
> > + base.head) \
> > + for_each_if((encoder_mask) & \
> > + drm_encoder_mask(&intel_encoder->base))
> > +
> > #define for_each_intel_dp(dev, intel_encoder) \
> > for_each_intel_encoder(dev, intel_encoder) \
> > for_each_if(intel_encoder_is_dp(intel_encoder))
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 414da0a542d6..eb80a2c4b55b 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -2382,15 +2382,24 @@ static void intel_encoder_info(struct seq_file *m,
> > struct intel_encoder *encoder)
> > {
> > struct drm_i915_private *dev_priv = node_to_i915(m->private);
> > - struct drm_device *dev = &dev_priv->drm;
> > - struct intel_connector *connector;
> > + struct drm_connector_list_iter conn_iter;
> > + struct drm_connector *connector;
> >
> > seq_printf(m, "\t[ENCODER:%d:%s]: connectors:\n",
> > encoder->base.base.id, encoder->base.name);
> >
> > - for_each_connector_on_encoder(dev, &encoder->base, connector)
> > + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > + drm_for_each_connector_iter(connector, &conn_iter) {
> > + const struct drm_connector_state *conn_state =
> > + connector->state;
> > +
> > + if (conn_state->best_encoder != &encoder->base)
> > + continue;
> > +
> > seq_printf(m, "\t\t[CONNECTOR:%d:%s]\n",
> > - connector->base.base.id, connector->base.name);
> > + connector->base.id, connector->name);
> > + }
> > + drm_connector_list_iter_end(&conn_iter);
> > }
> >
> > static void intel_panel_info(struct seq_file *m, struct intel_panel *panel)
> > @@ -2475,8 +2484,10 @@ static void intel_connector_info(struct seq_file *m,
> > struct drm_connector *connector)
> > {
> > struct intel_connector *intel_connector = to_intel_connector(connector);
> > - struct intel_encoder *intel_encoder = intel_connector->encoder;
> > - struct drm_display_mode *mode;
> > + const struct drm_connector_state *conn_state = connector->state;
> > + struct intel_encoder *encoder =
> > + to_intel_encoder(conn_state->best_encoder);
> > + const struct drm_display_mode *mode;
> >
> > seq_printf(m, "[CONNECTOR:%d:%s]: status: %s\n",
> > connector->base.id, connector->name,
> > @@ -2492,24 +2503,24 @@ static void intel_connector_info(struct seq_file *m,
> > drm_get_subpixel_order_name(connector->display_info.subpixel_order));
> > seq_printf(m, "\tCEA rev: %d\n", connector->display_info.cea_rev);
> >
> > - if (!intel_encoder)
> > + if (!encoder)
> > return;
> >
> > switch (connector->connector_type) {
> > case DRM_MODE_CONNECTOR_DisplayPort:
> > case DRM_MODE_CONNECTOR_eDP:
> > - if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
> > + if (encoder->type == INTEL_OUTPUT_DP_MST)
> > intel_dp_mst_info(m, intel_connector);
> > else
> > intel_dp_info(m, intel_connector);
> > break;
> > case DRM_MODE_CONNECTOR_LVDS:
> > - if (intel_encoder->type == INTEL_OUTPUT_LVDS)
> > + if (encoder->type == INTEL_OUTPUT_LVDS)
> > intel_lvds_info(m, intel_connector);
> > break;
> > case DRM_MODE_CONNECTOR_HDMIA:
> > - if (intel_encoder->type == INTEL_OUTPUT_HDMI ||
> > - intel_encoder->type == INTEL_OUTPUT_DDI)
> > + if (encoder->type == INTEL_OUTPUT_HDMI ||
> > + encoder->type == INTEL_OUTPUT_DDI)
> > intel_hdmi_info(m, intel_connector);
> > break;
> > default:
> > @@ -2653,6 +2664,7 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> > struct drm_i915_private *dev_priv = node_to_i915(m->private);
> > const struct intel_crtc_state *crtc_state =
> > to_intel_crtc_state(crtc->base.state);
> > + struct intel_encoder *encoder;
> >
> > seq_printf(m, "[CRTC:%d:%s]:\n",
> > crtc->base.base.id, crtc->base.name);
> > @@ -2663,8 +2675,6 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> > DRM_MODE_ARG(&crtc_state->uapi.mode));
> >
> > if (crtc_state->hw.enable) {
> > - struct intel_encoder *encoder;
> > -
> > seq_printf(m, "\thw: active=%s, adjusted_mode=" DRM_MODE_FMT "\n",
> > yesno(crtc_state->hw.active),
> > DRM_MODE_ARG(&crtc_state->hw.adjusted_mode));
> > @@ -2673,12 +2683,13 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> > crtc_state->pipe_src_w, crtc_state->pipe_src_h,
> > yesno(crtc_state->dither), crtc_state->pipe_bpp);
> >
> > - for_each_encoder_on_crtc(&dev_priv->drm, &crtc->base, encoder)
> > - intel_encoder_info(m, crtc, encoder);
> > -
> > intel_scaler_info(m, crtc);
> > }
> >
> > + for_each_intel_encoder_mask(&dev_priv->drm, encoder,
> > + crtc_state->uapi.encoder_mask)
> > + intel_encoder_info(m, crtc, encoder);
> > +
> > intel_plane_info(m, crtc);
> >
> > seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s\n",
> > --
> > 2.23.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ramalingam C <ramalingam.c@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 9/9] drm/i915: Stop using connector->encoder and encoder->crtc links in i915_display_info
Date: Mon, 2 Dec 2019 18:24:56 +0200 [thread overview]
Message-ID: <20191202162456.GI1208@intel.com> (raw)
Message-ID: <20191202162456.et6q1_gSLZ5Ga3nzUVLZhhOnEhtFt3YEf81nY-4o1QM@z> (raw)
In-Reply-To: <20191202154008.GG15371@intel.com>
On Mon, Dec 02, 2019 at 09:10:08PM +0530, Ramalingam C wrote:
> On 2019-11-29 at 20:54:34 +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Migrate away from the legacy encoder->crtc and connector->encoder links
> > in the debugfs display_info code. Other users still remain so can't kill
> > these off yet.
> May be I missed why we want to kill encoder->crtc and conn->encoder.
> If you dont mind please explain the reasoning.
They are pre-atomic legacy state. With atomic everything should be
tracked in crtc_state/etc. instead. These things are being updated
in the middle of commit_tail() so any use during atomic_check() must
already be considered a bug. So I want to eliminate them completely
mainly to stop people from using them in new code out of ignorance.
Fortunately it doesn't look like this will be as difficult as I
originally feared.
>
> Apart from that the implementation looks good to me.
>
> Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.h | 7 ++++
> > drivers/gpu/drm/i915/i915_debugfs.c | 43 ++++++++++++--------
> > 2 files changed, 34 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index a5ec5eeff056..5ed716a986ad 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -380,6 +380,13 @@ enum phy_fia {
> > &(dev)->mode_config.encoder_list, \
> > base.head)
> >
> > +#define for_each_intel_encoder_mask(dev, intel_encoder, encoder_mask) \
> > + list_for_each_entry(intel_encoder, \
> > + &(dev)->mode_config.encoder_list, \
> > + base.head) \
> > + for_each_if((encoder_mask) & \
> > + drm_encoder_mask(&intel_encoder->base))
> > +
> > #define for_each_intel_dp(dev, intel_encoder) \
> > for_each_intel_encoder(dev, intel_encoder) \
> > for_each_if(intel_encoder_is_dp(intel_encoder))
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 414da0a542d6..eb80a2c4b55b 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -2382,15 +2382,24 @@ static void intel_encoder_info(struct seq_file *m,
> > struct intel_encoder *encoder)
> > {
> > struct drm_i915_private *dev_priv = node_to_i915(m->private);
> > - struct drm_device *dev = &dev_priv->drm;
> > - struct intel_connector *connector;
> > + struct drm_connector_list_iter conn_iter;
> > + struct drm_connector *connector;
> >
> > seq_printf(m, "\t[ENCODER:%d:%s]: connectors:\n",
> > encoder->base.base.id, encoder->base.name);
> >
> > - for_each_connector_on_encoder(dev, &encoder->base, connector)
> > + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > + drm_for_each_connector_iter(connector, &conn_iter) {
> > + const struct drm_connector_state *conn_state =
> > + connector->state;
> > +
> > + if (conn_state->best_encoder != &encoder->base)
> > + continue;
> > +
> > seq_printf(m, "\t\t[CONNECTOR:%d:%s]\n",
> > - connector->base.base.id, connector->base.name);
> > + connector->base.id, connector->name);
> > + }
> > + drm_connector_list_iter_end(&conn_iter);
> > }
> >
> > static void intel_panel_info(struct seq_file *m, struct intel_panel *panel)
> > @@ -2475,8 +2484,10 @@ static void intel_connector_info(struct seq_file *m,
> > struct drm_connector *connector)
> > {
> > struct intel_connector *intel_connector = to_intel_connector(connector);
> > - struct intel_encoder *intel_encoder = intel_connector->encoder;
> > - struct drm_display_mode *mode;
> > + const struct drm_connector_state *conn_state = connector->state;
> > + struct intel_encoder *encoder =
> > + to_intel_encoder(conn_state->best_encoder);
> > + const struct drm_display_mode *mode;
> >
> > seq_printf(m, "[CONNECTOR:%d:%s]: status: %s\n",
> > connector->base.id, connector->name,
> > @@ -2492,24 +2503,24 @@ static void intel_connector_info(struct seq_file *m,
> > drm_get_subpixel_order_name(connector->display_info.subpixel_order));
> > seq_printf(m, "\tCEA rev: %d\n", connector->display_info.cea_rev);
> >
> > - if (!intel_encoder)
> > + if (!encoder)
> > return;
> >
> > switch (connector->connector_type) {
> > case DRM_MODE_CONNECTOR_DisplayPort:
> > case DRM_MODE_CONNECTOR_eDP:
> > - if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
> > + if (encoder->type == INTEL_OUTPUT_DP_MST)
> > intel_dp_mst_info(m, intel_connector);
> > else
> > intel_dp_info(m, intel_connector);
> > break;
> > case DRM_MODE_CONNECTOR_LVDS:
> > - if (intel_encoder->type == INTEL_OUTPUT_LVDS)
> > + if (encoder->type == INTEL_OUTPUT_LVDS)
> > intel_lvds_info(m, intel_connector);
> > break;
> > case DRM_MODE_CONNECTOR_HDMIA:
> > - if (intel_encoder->type == INTEL_OUTPUT_HDMI ||
> > - intel_encoder->type == INTEL_OUTPUT_DDI)
> > + if (encoder->type == INTEL_OUTPUT_HDMI ||
> > + encoder->type == INTEL_OUTPUT_DDI)
> > intel_hdmi_info(m, intel_connector);
> > break;
> > default:
> > @@ -2653,6 +2664,7 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> > struct drm_i915_private *dev_priv = node_to_i915(m->private);
> > const struct intel_crtc_state *crtc_state =
> > to_intel_crtc_state(crtc->base.state);
> > + struct intel_encoder *encoder;
> >
> > seq_printf(m, "[CRTC:%d:%s]:\n",
> > crtc->base.base.id, crtc->base.name);
> > @@ -2663,8 +2675,6 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> > DRM_MODE_ARG(&crtc_state->uapi.mode));
> >
> > if (crtc_state->hw.enable) {
> > - struct intel_encoder *encoder;
> > -
> > seq_printf(m, "\thw: active=%s, adjusted_mode=" DRM_MODE_FMT "\n",
> > yesno(crtc_state->hw.active),
> > DRM_MODE_ARG(&crtc_state->hw.adjusted_mode));
> > @@ -2673,12 +2683,13 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> > crtc_state->pipe_src_w, crtc_state->pipe_src_h,
> > yesno(crtc_state->dither), crtc_state->pipe_bpp);
> >
> > - for_each_encoder_on_crtc(&dev_priv->drm, &crtc->base, encoder)
> > - intel_encoder_info(m, crtc, encoder);
> > -
> > intel_scaler_info(m, crtc);
> > }
> >
> > + for_each_intel_encoder_mask(&dev_priv->drm, encoder,
> > + crtc_state->uapi.encoder_mask)
> > + intel_encoder_info(m, crtc, encoder);
> > +
> > intel_plane_info(m, crtc);
> >
> > seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s\n",
> > --
> > 2.23.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-12-02 16:25 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-29 18:54 [PATCH v2 0/9] drm/i915: i915_display_info cleanup Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-11-29 18:54 ` [PATCH v2 1/9] drm/i915: Use drm_rect to simplify plane {crtc, src}_{x, y, w, h} printing Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 7:55 ` Ramalingam C
2019-12-02 7:55 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 2/9] drm/i915: Switch to intel_ types in debugfs display_info Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 8:59 ` Ramalingam C
2019-12-02 8:59 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 3/9] drm/i915: Reorganize plane/fb dump in debugfs Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 14:27 ` Ramalingam C
2019-12-02 14:27 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 4/9] drm/i915: Refactor debugfs display info code Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 14:34 ` Ramalingam C
2019-12-02 14:34 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 5/9] drm/i915: Dump the mode for the crtc just the once Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 14:56 ` Ramalingam C
2019-12-02 14:56 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 6/9] drm/i915: Use drm_modeset_lock_all() in debugfs display info Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 15:05 ` Ramalingam C
2019-12-02 15:05 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 7/9] drm/i915: Use the canonical [CRTC:%d:%s]/etc. format in i915_display_info Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 15:08 ` Ramalingam C
2019-12-02 15:08 ` [Intel-gfx] " Ramalingam C
2019-12-02 15:43 ` Ramalingam C
2019-12-02 15:43 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 8/9] drm/i915: Dump both the uapi and hw states for crtcs and planes Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 15:18 ` Ramalingam C
2019-12-02 15:18 ` [Intel-gfx] " Ramalingam C
2019-11-29 18:54 ` [PATCH v2 9/9] drm/i915: Stop using connector->encoder and encoder->crtc links in i915_display_info Ville Syrjala
2019-11-29 18:54 ` [Intel-gfx] " Ville Syrjala
2019-12-02 15:40 ` Ramalingam C
2019-12-02 15:40 ` [Intel-gfx] " Ramalingam C
2019-12-02 16:24 ` Ville Syrjälä [this message]
2019-12-02 16:24 ` Ville Syrjälä
2019-12-02 16:52 ` Ramalingam C
2019-12-02 16:52 ` [Intel-gfx] " Ramalingam C
2019-11-29 21:43 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: i915_display_info cleanup Patchwork
2019-11-29 21:43 ` [Intel-gfx] " Patchwork
2019-11-29 22:27 ` ✓ Fi.CI.BAT: success " Patchwork
2019-11-29 22:27 ` [Intel-gfx] " Patchwork
2019-12-01 1:15 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-12-01 1:15 ` [Intel-gfx] " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191202162456.GI1208@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ramalingam.c@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox