From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [CI 05/11] drm/i915/dg1: Add and setup DPLLs for DG1
Date: Wed, 14 Oct 2020 12:19:31 -0700 [thread overview]
Message-ID: <20201014191937.1266226-5-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20201014191937.1266226-1-lucas.demarchi@intel.com>
From: Aditya Swarup <aditya.swarup@intel.com>
Add entries for dg1 plls and setup dg1_pll_mgr to reuse ICL callbacks.
Initial setup for shared dplls DPLL0/1 for DDIA/DDIB and DPLL2/3 for
DDI-TC1/DDI-TC2. Configure dpll cfgcrx registers to drive the plls on
DG1.
v2 (Lucas): Reword commit message and add missing update_ref_clks hook
(requested by Matt Roper)
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 42 +++++++++++++++++--
1 file changed, 38 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 48c30c50a301..2f412d2c9d09 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3546,7 +3546,17 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
icl_calc_dpll_state(dev_priv, &pll_params, &port_dpll->hw_state);
- if (IS_ROCKETLAKE(dev_priv)) {
+ if (IS_DG1(dev_priv)) {
+ if (port == PORT_D || port == PORT_E) {
+ dpll_mask =
+ BIT(DPLL_ID_DG1_DPLL2) |
+ BIT(DPLL_ID_DG1_DPLL3);
+ } else {
+ dpll_mask =
+ BIT(DPLL_ID_DG1_DPLL0) |
+ BIT(DPLL_ID_DG1_DPLL1);
+ }
+ } else if (IS_ROCKETLAKE(dev_priv)) {
dpll_mask =
BIT(DPLL_ID_EHL_DPLL4) |
BIT(DPLL_ID_ICL_DPLL1) |
@@ -3842,7 +3852,10 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
if (!(val & PLL_ENABLE))
goto out;
- if (IS_ROCKETLAKE(dev_priv)) {
+ if (IS_DG1(dev_priv)) {
+ hw_state->cfgcr0 = intel_de_read(dev_priv, DG1_DPLL_CFGCR0(id));
+ hw_state->cfgcr1 = intel_de_read(dev_priv, DG1_DPLL_CFGCR1(id));
+ } else if (IS_ROCKETLAKE(dev_priv)) {
hw_state->cfgcr0 = intel_de_read(dev_priv,
RKL_DPLL_CFGCR0(id));
hw_state->cfgcr1 = intel_de_read(dev_priv,
@@ -3895,7 +3908,10 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
const enum intel_dpll_id id = pll->info->id;
i915_reg_t cfgcr0_reg, cfgcr1_reg;
- if (IS_ROCKETLAKE(dev_priv)) {
+ if (IS_DG1(dev_priv)) {
+ cfgcr0_reg = DG1_DPLL_CFGCR0(id);
+ cfgcr1_reg = DG1_DPLL_CFGCR1(id);
+ } else if (IS_ROCKETLAKE(dev_priv)) {
cfgcr0_reg = RKL_DPLL_CFGCR0(id);
cfgcr1_reg = RKL_DPLL_CFGCR1(id);
} else if (INTEL_GEN(dev_priv) >= 12) {
@@ -4339,6 +4355,22 @@ static const struct intel_dpll_mgr rkl_pll_mgr = {
.dump_hw_state = icl_dump_hw_state,
};
+static const struct dpll_info dg1_plls[] = {
+ { "DPLL 0", &combo_pll_funcs, DPLL_ID_DG1_DPLL0, 0 },
+ { "DPLL 1", &combo_pll_funcs, DPLL_ID_DG1_DPLL1, 0 },
+ { "DPLL 2", &combo_pll_funcs, DPLL_ID_DG1_DPLL2, 0 },
+ { "DPLL 3", &combo_pll_funcs, DPLL_ID_DG1_DPLL3, 0 },
+ { },
+};
+
+static const struct intel_dpll_mgr dg1_pll_mgr = {
+ .dpll_info = dg1_plls,
+ .get_dplls = icl_get_dplls,
+ .put_dplls = icl_put_dplls,
+ .update_ref_clks = icl_update_dpll_ref_clks,
+ .dump_hw_state = icl_dump_hw_state,
+};
+
/**
* intel_shared_dpll_init - Initialize shared DPLLs
* @dev: drm device
@@ -4352,7 +4384,9 @@ void intel_shared_dpll_init(struct drm_device *dev)
const struct dpll_info *dpll_info;
int i;
- if (IS_ROCKETLAKE(dev_priv))
+ if (IS_DG1(dev_priv))
+ dpll_mgr = &dg1_pll_mgr;
+ else if (IS_ROCKETLAKE(dev_priv))
dpll_mgr = &rkl_pll_mgr;
else if (INTEL_GEN(dev_priv) >= 12)
dpll_mgr = &tgl_pll_mgr;
--
2.28.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-10-14 19:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 19:19 [Intel-gfx] [CI 01/11] drm/i915/display: allow to skip certain power wells Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 02/11] drm/i915/cnl: skip PW_DDI_F on certain skus Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 03/11] drm/i915/dg1: Add DG1 power wells Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 04/11] drm/i915/dg1: Add DPLL macros for DG1 Lucas De Marchi
2020-10-14 19:19 ` Lucas De Marchi [this message]
2020-10-14 19:19 ` [Intel-gfx] [CI 06/11] drm/i915/dg1: Enable DPLL " Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 07/11] drm/i915/dg1: Load DMC Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 08/11] drm/i915/dg1: Add initial DG1 workarounds Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 09/11] drm/i915/dg1: DG1 does not support DC6 Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 10/11] drm/i915/dg1: Update DMC_DEBUG register Lucas De Marchi
2020-10-14 19:19 ` [Intel-gfx] [CI 11/11] drm/i915/dgfx: define llc and snooping behaviour Lucas De Marchi
2020-10-14 19:45 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,01/11] drm/i915/display: allow to skip certain power wells Patchwork
2020-10-14 19:47 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-10-14 20:10 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-14 21:16 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014191937.1266226-5-lucas.demarchi@intel.com \
--to=lucas.demarchi@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox