From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [v9 10/12] drm/i915/lspcon: Create separate infoframe_enabled helper
Date: Wed, 25 Nov 2020 18:56:04 +0200 [thread overview]
Message-ID: <20201125165604.GY6112@intel.com> (raw)
In-Reply-To: <20201103152834.12727-11-uma.shankar@intel.com>
On Tue, Nov 03, 2020 at 08:58:32PM +0530, Uma Shankar wrote:
> Lspcon has Infoframes as well as DIP for HDR metadata(DRM Infoframe).
> Create a separate mechanism for lspcon compared to HDMI in order to
> address the same and ensure future scalability.
>
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 10 +++++++---
> drivers/gpu/drm/i915/display/intel_lspcon.c | 18 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_lspcon.h | 2 ++
> 3 files changed, 27 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 19b16517a502..d50dd1f1292a 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4402,6 +4402,7 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
> enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> + struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> u32 temp, flags = 0;
>
> /* XXX: DSI transcoder paranoia */
> @@ -4482,9 +4483,12 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
> pipe_config->fec_enable);
> }
>
> - pipe_config->infoframes.enable |=
> - intel_hdmi_infoframes_enabled(encoder, pipe_config);
> -
> + if (dig_port->lspcon.active && dig_port->dp.has_hdmi_sink)
> + pipe_config->infoframes.enable |=
> + intel_lspcon_infoframes_enabled(encoder, pipe_config);
> + else
> + pipe_config->infoframes.enable |=
> + intel_hdmi_infoframes_enabled(encoder, pipe_config);
> break;
> case TRANS_DDI_MODE_SELECT_DP_MST:
> pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 8a4fd8ca8016..9c8dfd2fb949 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -30,6 +30,7 @@
> #include "intel_display_types.h"
> #include "intel_dp.h"
> #include "intel_lspcon.h"
> +#include "intel_hdmi.h"
>
> /* LSPCON OUI Vendor ID(signatures) */
> #define LSPCON_VENDOR_PARADE_OUI 0x001CF8
> @@ -667,6 +668,23 @@ bool lspcon_init(struct intel_digital_port *dig_port)
> return true;
> }
>
> +u32 intel_lspcon_infoframes_enabled(struct intel_encoder *encoder,
> + const struct intel_crtc_state *pipe_config)
> +{
> + struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> + u32 val, enabled = 0;
> +
> + val = dig_port->infoframes_enabled(encoder, pipe_config);
> +
> + if (val & VIDEO_DIP_ENABLE_AVI_HSW)
So this is the function I figured should allow us to not to pretend to
use the video DIP bits.
I ttink the actual lspcon infoframes_enabled() could just directly use
intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_AVI) etc. instead
of doing this extra remapping here.
> + enabled |= intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_AVI);
> +
> + if (val & VIDEO_DIP_ENABLE_GMP_HSW)
> + enabled |= intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
> +
> + return enabled;
> +}
> +
> void lspcon_resume(struct intel_digital_port *dig_port)
> {
> struct intel_lspcon *lspcon = &dig_port->lspcon;
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
> index d622156d0c4e..e92735408443 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.h
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
> @@ -41,5 +41,7 @@ void hsw_read_infoframe(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> unsigned int type,
> void *frame, ssize_t len);
> +u32 intel_lspcon_infoframes_enabled(struct intel_encoder *encoder,
> + const struct intel_crtc_state *pipe_config);
>
> #endif /* __INTEL_LSPCON_H__ */
> --
> 2.26.2
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-11-25 16:56 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 15:28 [Intel-gfx] [v9 00/12] Enable HDR on MCA LSPCON based Gen9 devices Uma Shankar
2020-11-03 15:28 ` [Intel-gfx] [v9 01/12] drm/i915/display: Add HDR Capability detection for LSPCON Uma Shankar
2020-11-25 16:30 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 02/12] drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon Uma Shankar
2020-11-25 16:37 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 03/12] drm/i915/display: Attach HDR property for capable Gen9 devices Uma Shankar
2020-11-04 7:30 ` [Intel-gfx] [v10 " Uma Shankar
2020-11-25 16:36 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 04/12] drm/i915/display: Attach content type property for LSPCON Uma Shankar
2020-11-25 16:29 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 05/12] drm/i915/display: Nuke bogus lspcon check Uma Shankar
2020-11-25 16:29 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 06/12] drm/i915/display: Enable BT2020 for HDR on LSPCON devices Uma Shankar
2020-11-25 16:40 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 07/12] drm/i915/display: Enable HDR for Parade based lspcon Uma Shankar
2020-11-25 16:42 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 08/12] drm/i915/display: Implement infoframes readback for LSPCON Uma Shankar
2020-11-25 16:46 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 09/12] drm/i915/display: Implement DRM infoframe read " Uma Shankar
2020-11-25 16:50 ` Ville Syrjälä
2020-11-03 15:28 ` [Intel-gfx] [v9 10/12] drm/i915/lspcon: Create separate infoframe_enabled helper Uma Shankar
2020-11-25 16:56 ` Ville Syrjälä [this message]
2020-11-26 7:45 ` Shankar, Uma
2020-11-03 15:28 ` [Intel-gfx] [v9 11/12] drm/i915/lspcon: Do not send DRM infoframes to non-HDMI sinks Uma Shankar
2020-11-03 15:28 ` [Intel-gfx] [v9 12/12] drm/i915/display: [NOT FOR MERGE] Reduce blanking to support 4k60@10bpp for LSPCON Uma Shankar
2020-11-03 15:46 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Enable HDR on MCA LSPCON based Gen9 devices (rev9) Patchwork
2020-11-03 15:48 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-11-03 16:08 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2020-11-04 7:22 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Enable HDR on MCA LSPCON based Gen9 devices (rev10) Patchwork
2020-11-04 7:24 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-11-04 7:41 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-11-04 9:40 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201125165604.GY6112@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox