Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH v3 11/15] drm/i915: Extract _cnl_ddi_{enable, disable}_clock()
Date: Fri,  5 Feb 2021 23:46:30 +0200	[thread overview]
Message-ID: <20210205214634.19341-12-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20210205214634.19341-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

All the DPCLKA_CFGCR handling follows a common pattern. Let's
extract that to a small helper that just takes a few parameters
each caller can customize.

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 108 +++++++++--------------
 1 file changed, 44 insertions(+), 64 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index c98bdf456958..8b7ef5f3ba03 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1597,11 +1597,37 @@ static u32 icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+static void _cnl_ddi_enable_clock(struct drm_i915_private *i915, i915_reg_t reg,
+				  u32 clk_sel_mask, u32 clk_sel, u32 clk_off)
+{
+	mutex_lock(&i915->dpll.lock);
+
+	intel_de_rmw(i915, reg, clk_sel_mask, clk_sel);
+
+	/*
+	 * "This step and the step before must be
+	 *  done with separate register writes."
+	 */
+	intel_de_rmw(i915, reg, clk_off, 0);
+
+	mutex_unlock(&i915->dpll.lock);
+}
+
+static void _cnl_ddi_disable_clock(struct drm_i915_private *i915, i915_reg_t reg,
+				   u32 clk_off)
+{
+	mutex_lock(&i915->dpll.lock);
+
+	intel_de_rmw(i915, reg, 0, clk_off);
+
+	mutex_unlock(&i915->dpll.lock);
+}
+
 static void dg1_ddi_enable_clock(struct intel_encoder *encoder,
 				 const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_shared_dpll *pll = crtc_state->shared_dpll;
+	const struct intel_shared_dpll *pll = crtc_state->shared_dpll;
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	if (drm_WARN_ON(&dev_priv->drm, !pll))
@@ -1616,16 +1642,10 @@ static void dg1_ddi_enable_clock(struct intel_encoder *encoder,
 			(pll->info->id >= DPLL_ID_DG1_DPLL2 && phy < PHY_C)))
 		return;
 
-	mutex_lock(&dev_priv->dpll.lock);
-
-	intel_de_rmw(dev_priv, DG1_DPCLKA_CFGCR0(phy),
-		     DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy),
-		     DG1_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy));
-
-	intel_de_rmw(dev_priv, DG1_DPCLKA_CFGCR0(phy),
-		     DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy), 0);
-
-	mutex_unlock(&dev_priv->dpll.lock);
+	_cnl_ddi_enable_clock(dev_priv, DG1_DPCLKA_CFGCR0(phy),
+			      DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy),
+			      DG1_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy),
+			      DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy));
 }
 
 static void dg1_ddi_disable_clock(struct intel_encoder *encoder)
@@ -1633,19 +1653,15 @@ static void dg1_ddi_disable_clock(struct intel_encoder *encoder)
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
-	mutex_lock(&dev_priv->dpll.lock);
-
-	intel_de_rmw(dev_priv, DG1_DPCLKA_CFGCR0(phy),
-		     0, DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy));
-
-	mutex_unlock(&dev_priv->dpll.lock);
+	_cnl_ddi_disable_clock(dev_priv, DG1_DPCLKA_CFGCR0(phy),
+			       DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy));
 }
 
 static void icl_ddi_combo_enable_clock(struct intel_encoder *encoder,
 				       const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_shared_dpll *pll = crtc_state->shared_dpll;
+	const struct intel_shared_dpll *pll = crtc_state->shared_dpll;
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	u32 mask, sel;
 	i915_reg_t reg;
@@ -1667,24 +1683,8 @@ static void icl_ddi_combo_enable_clock(struct intel_encoder *encoder,
 	if (drm_WARN_ON(&dev_priv->drm, !pll))
 		return;
 
-	mutex_lock(&dev_priv->dpll.lock);
-
-	/*
-	 * Even though this register references DDIs, note that we
-	 * want to pass the PHY rather than the port (DDI).  For
-	 * ICL, port=phy in all cases so it doesn't matter, but for
-	 * EHL the bspec notes the following:
-	 *
-	 *   "DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
-	 *   Clock Select chooses the PLL for both DDIA and DDID and
-	 *   drives port A in all cases."
-	 */
-	intel_de_rmw(dev_priv, reg, mask, sel);
-
-	intel_de_rmw(dev_priv, reg,
-		     icl_dpclka_cfgcr0_clk_off(dev_priv, phy), 0);
-
-	mutex_unlock(&dev_priv->dpll.lock);
+	_cnl_ddi_enable_clock(dev_priv, reg, mask, sel,
+			      icl_dpclka_cfgcr0_clk_off(dev_priv, phy));
 }
 
 static void icl_ddi_combo_disable_clock(struct intel_encoder *encoder)
@@ -1693,19 +1693,13 @@ static void icl_ddi_combo_disable_clock(struct intel_encoder *encoder)
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	i915_reg_t reg;
 
-	mutex_lock(&dev_priv->dpll.lock);
-
 	if (IS_ALDERLAKE_S(dev_priv))
 		reg = ADLS_DPCLKA_CFGCR(phy);
 	else
 		reg = ICL_DPCLKA_CFGCR0;
 
-	mutex_lock(&dev_priv->dpll.lock);
-
-	intel_de_rmw(dev_priv, reg,
-		     0, icl_dpclka_cfgcr0_clk_off(dev_priv, phy));
-
-	mutex_unlock(&dev_priv->dpll.lock);
+	_cnl_ddi_disable_clock(dev_priv, reg,
+			       icl_dpclka_cfgcr0_clk_off(dev_priv, phy));
 }
 
 static void dg1_sanitize_port_clk_off(struct drm_i915_private *dev_priv,
@@ -1912,20 +1906,10 @@ static void cnl_ddi_enable_clock(struct intel_encoder *encoder,
 	if (drm_WARN_ON(&i915->drm, !pll))
 		return;
 
-	mutex_lock(&i915->dpll.lock);
-
-	intel_de_rmw(i915, DPCLKA_CFGCR0,
-		     DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port),
-		     DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port));
-
-	/*
-	 * "This step and the step before must be
-	 *  done with separate register writes."
-	 */
-	intel_de_rmw(i915, DPCLKA_CFGCR0,
-		     DPCLKA_CFGCR0_DDI_CLK_OFF(port), 0);
-
-	mutex_unlock(&i915->dpll.lock);
+	_cnl_ddi_enable_clock(i915, DPCLKA_CFGCR0,
+			      DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port),
+			      DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port),
+			      DPCLKA_CFGCR0_DDI_CLK_OFF(port));
 }
 
 static void cnl_ddi_disable_clock(struct intel_encoder *encoder)
@@ -1933,12 +1917,8 @@ static void cnl_ddi_disable_clock(struct intel_encoder *encoder)
 	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	enum port port = encoder->port;
 
-	mutex_lock(&i915->dpll.lock);
-
-	intel_de_rmw(i915, DPCLKA_CFGCR0,
-		     0, DPCLKA_CFGCR0_DDI_CLK_OFF(port));
-
-	mutex_unlock(&i915->dpll.lock);
+	_cnl_ddi_disable_clock(i915, DPCLKA_CFGCR0,
+			       DPCLKA_CFGCR0_DDI_CLK_OFF(port));
 }
 
 static void skl_ddi_enable_clock(struct intel_encoder *encoder,
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-02-05 21:47 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 21:46 [Intel-gfx] [PATCH v3 00/15] drm/i915: Clean up the DDI clock routing mess Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 01/15] drm/i915: Use intel_ddi_clk_select() for FDI Ville Syrjala
2021-02-13 17:33   ` Lucas De Marchi
2021-02-16 13:00     ` Ville Syrjälä
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 02/15] drm/i915: Introduce .{enable, disable}_clock() encoder vfuncs Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 03/15] drm/i915: Extract hsw_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 04/15] drm/i915: Extract skl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 05/15] drm/i195: Extract cnl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 06/15] drm/i915: Convert DG1 over to .{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 07/15] drm/i915: Extract icl+ .{enable, disable}_clock() vfuncs Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 08/15] drm/i915: Use intel_de_rmw() for DDI clock routing Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 09/15] drm/i915: Sprinkle a few missing locks around shared DDI clock registers Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 10/15] drm/i915: Sprinkle WARN(!pll) into icl/dg1 .clock_enable() Ville Syrjala
2021-02-05 21:46 ` Ville Syrjala [this message]
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 12/15] drm/i915: Split adl-s/rkl from icl_ddi_combo_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 13/15] drm/i915: Use .disable_clock() for pll sanitation Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 14/15] drm/i915: Relocate icl_sanitize_encoder_pll_mapping() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 15/15] drm/i915: s/dev_priv/i915/ for the remainder of DDI clock routing Ville Syrjala
2021-02-13 17:34   ` Lucas De Marchi
2021-02-05 23:49 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Clean up the DDI clock routing mess (rev3) Patchwork
2021-02-05 23:50 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-02-06  0:20 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-02-06 11:51 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210205214634.19341-12-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox