From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH v3 14/15] drm/i915: Relocate icl_sanitize_encoder_pll_mapping()
Date: Fri, 5 Feb 2021 23:46:33 +0200 [thread overview]
Message-ID: <20210205214634.19341-15-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20210205214634.19341-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Move icl_sanitize_encoder_pll_mapping() out from the middle
of the .{enable,disable}_clock() functions.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 112 +++++++++++------------
1 file changed, 56 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 967871c2bf1e..d4b9410110fd 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1715,62 +1715,6 @@ static void icl_ddi_combo_disable_clock(struct intel_encoder *encoder)
ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy));
}
-void icl_sanitize_encoder_pll_mapping(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- u32 port_mask;
- bool ddi_clk_needed;
-
- /*
- * In case of DP MST, we sanitize the primary encoder only, not the
- * virtual ones.
- */
- if (encoder->type == INTEL_OUTPUT_DP_MST)
- return;
-
- if (!encoder->base.crtc && intel_encoder_is_dp(encoder)) {
- u8 pipe_mask;
- bool is_mst;
-
- intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst);
- /*
- * In the unlikely case that BIOS enables DP in MST mode, just
- * warn since our MST HW readout is incomplete.
- */
- if (drm_WARN_ON(&dev_priv->drm, is_mst))
- return;
- }
-
- port_mask = BIT(encoder->port);
- ddi_clk_needed = encoder->base.crtc;
-
- if (encoder->type == INTEL_OUTPUT_DSI) {
- struct intel_encoder *other_encoder;
-
- port_mask = intel_dsi_encoder_ports(encoder);
- /*
- * Sanity check that we haven't incorrectly registered another
- * encoder using any of the ports of this DSI encoder.
- */
- for_each_intel_encoder(&dev_priv->drm, other_encoder) {
- if (other_encoder == encoder)
- continue;
-
- if (drm_WARN_ON(&dev_priv->drm,
- port_mask & BIT(other_encoder->port)))
- return;
- }
- /*
- * For DSI we keep the ddi clocks gated
- * except during enable/disable sequence.
- */
- ddi_clk_needed = false;
- }
-
- if (!ddi_clk_needed && encoder->disable_clock)
- encoder->disable_clock(encoder);
-}
-
static void jsl_ddi_tc_enable_clock(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
@@ -1931,6 +1875,62 @@ static void intel_ddi_disable_clock(struct intel_encoder *encoder)
encoder->disable_clock(encoder);
}
+void icl_sanitize_encoder_pll_mapping(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ u32 port_mask;
+ bool ddi_clk_needed;
+
+ /*
+ * In case of DP MST, we sanitize the primary encoder only, not the
+ * virtual ones.
+ */
+ if (encoder->type == INTEL_OUTPUT_DP_MST)
+ return;
+
+ if (!encoder->base.crtc && intel_encoder_is_dp(encoder)) {
+ u8 pipe_mask;
+ bool is_mst;
+
+ intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst);
+ /*
+ * In the unlikely case that BIOS enables DP in MST mode, just
+ * warn since our MST HW readout is incomplete.
+ */
+ if (drm_WARN_ON(&dev_priv->drm, is_mst))
+ return;
+ }
+
+ port_mask = BIT(encoder->port);
+ ddi_clk_needed = encoder->base.crtc;
+
+ if (encoder->type == INTEL_OUTPUT_DSI) {
+ struct intel_encoder *other_encoder;
+
+ port_mask = intel_dsi_encoder_ports(encoder);
+ /*
+ * Sanity check that we haven't incorrectly registered another
+ * encoder using any of the ports of this DSI encoder.
+ */
+ for_each_intel_encoder(&dev_priv->drm, other_encoder) {
+ if (other_encoder == encoder)
+ continue;
+
+ if (drm_WARN_ON(&dev_priv->drm,
+ port_mask & BIT(other_encoder->port)))
+ return;
+ }
+ /*
+ * For DSI we keep the ddi clocks gated
+ * except during enable/disable sequence.
+ */
+ ddi_clk_needed = false;
+ }
+
+ if (!ddi_clk_needed && encoder->disable_clock)
+ encoder->disable_clock(encoder);
+}
+
static void
icl_program_mg_dp_mode(struct intel_digital_port *dig_port,
const struct intel_crtc_state *crtc_state)
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-02-05 21:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 21:46 [Intel-gfx] [PATCH v3 00/15] drm/i915: Clean up the DDI clock routing mess Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 01/15] drm/i915: Use intel_ddi_clk_select() for FDI Ville Syrjala
2021-02-13 17:33 ` Lucas De Marchi
2021-02-16 13:00 ` Ville Syrjälä
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 02/15] drm/i915: Introduce .{enable, disable}_clock() encoder vfuncs Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 03/15] drm/i915: Extract hsw_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 04/15] drm/i915: Extract skl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 05/15] drm/i195: Extract cnl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 06/15] drm/i915: Convert DG1 over to .{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 07/15] drm/i915: Extract icl+ .{enable, disable}_clock() vfuncs Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 08/15] drm/i915: Use intel_de_rmw() for DDI clock routing Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 09/15] drm/i915: Sprinkle a few missing locks around shared DDI clock registers Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 10/15] drm/i915: Sprinkle WARN(!pll) into icl/dg1 .clock_enable() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 11/15] drm/i915: Extract _cnl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 12/15] drm/i915: Split adl-s/rkl from icl_ddi_combo_{enable, disable}_clock() Ville Syrjala
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 13/15] drm/i915: Use .disable_clock() for pll sanitation Ville Syrjala
2021-02-05 21:46 ` Ville Syrjala [this message]
2021-02-05 21:46 ` [Intel-gfx] [PATCH v3 15/15] drm/i915: s/dev_priv/i915/ for the remainder of DDI clock routing Ville Syrjala
2021-02-13 17:34 ` Lucas De Marchi
2021-02-05 23:49 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Clean up the DDI clock routing mess (rev3) Patchwork
2021-02-05 23:50 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-02-06 0:20 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-02-06 11:51 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205214634.19341-15-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lucas.demarchi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox