From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 16/56] drm/i915/xelpd: Required bandwidth increases when VT-d is active
Date: Thu, 11 Mar 2021 14:35:52 -0800 [thread overview]
Message-ID: <20210311223632.3191939-17-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210311223632.3191939-1-matthew.d.roper@intel.com>
If VT-d is active, the memory bandwidth usage of the display is 5%
higher. Take this into account when determining whether we can support
a display configuration.
Bspec: 64631
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/display/intel_bw.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 20dbc3759d27..23cf9bf31e41 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -344,6 +344,9 @@ static unsigned int intel_bw_data_rate(struct drm_i915_private *dev_priv,
for_each_pipe(dev_priv, pipe)
data_rate += bw_state->data_rate[pipe];
+ if (DISPLAY_VER(dev_priv) >= 13 && intel_vtd_active())
+ data_rate = data_rate * 105 / 100;
+
return data_rate;
}
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-11 22:36 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 22:35 [Intel-gfx] [PATCH 00/56] Introduce Alder Lake-P Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 01/56] drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGE Matt Roper
2021-03-12 16:50 ` Ville Syrjälä
2021-03-11 22:35 ` [Intel-gfx] [PATCH 02/56] drm/i915: Add DISPLAY_VER() Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 03/56] drm/i915/display: Eliminate most usage of INTEL_GEN() Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 04/56] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in intel_pm.c Matt Roper
2021-03-12 20:42 ` Srivatsa, Anusha
2021-03-12 20:46 ` Matt Roper
2021-03-17 18:02 ` Jani Nikula
2021-03-11 22:35 ` [Intel-gfx] [PATCH 05/56] drm/i915: Convert INTEL_GEN() to DISPLAY_VER() as appropriate in i915_irq.c Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 06/56] drm/i915/display: Simplify GLK display version tests Matt Roper
2021-03-12 18:52 ` Ville Syrjälä
2021-03-11 22:35 ` [Intel-gfx] [PATCH 07/56] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 08/56] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-12 22:41 ` Srivatsa, Anusha
2021-03-11 22:35 ` [Intel-gfx] [PATCH 09/56] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 10/56] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 11/56] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 12/56] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 13/56] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 14/56] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 15/56] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-03-11 22:35 ` Matt Roper [this message]
2021-03-12 23:03 ` [Intel-gfx] [PATCH 16/56] drm/i915/xelpd: Required bandwidth increases when VT-d is active Srivatsa, Anusha
2021-03-11 22:35 ` [Intel-gfx] [PATCH 17/56] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 18/56] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 19/56] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 20/56] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 21/56] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 22/56] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-03-11 22:35 ` [Intel-gfx] [PATCH 23/56] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 24/56] drm/i915/adl_p: Add PCI Devices IDs Matt Roper
2021-03-12 23:20 ` Srivatsa, Anusha
2021-03-17 18:04 ` Jani Nikula
2021-03-11 22:36 ` [Intel-gfx] [PATCH 25/56] drm/i915/adl_p: ADL_P device info enabling Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 26/56] drm/i915/adl_p: Add PCH support Matt Roper
2021-03-12 23:52 ` Srivatsa, Anusha
2021-03-11 22:36 ` [Intel-gfx] [PATCH 27/56] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 28/56] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-03-12 23:59 ` Srivatsa, Anusha
2021-03-11 22:36 ` [Intel-gfx] [PATCH 29/56] drm/i915/adl_p: Load DMC Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 30/56] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 31/56] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 32/56] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 33/56] drm/i915/adl_p: Handle TC cold Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 34/56] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 35/56] drm/i915/adl_p: Enable modular fia Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 36/56] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 37/56] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 38/56] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 39/56] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 40/56] drm/i915/adl_p: MBUS programming Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 41/56] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 42/56] drm/i915/adl_p: Add initial ADL_P Workarounds Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 43/56] drm/i915/adlp: Define GuC/HuC for Alderlake_P Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 44/56] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 45/56] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 46/56] drm/i915/adl_p: Add PLL Support Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 47/56] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 48/56] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 49/56] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 50/56] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 51/56] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 52/56] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 53/56] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-03-11 22:36 ` [Intel-gfx] [PATCH 54/56] drm/i915/display/adl_p: Remove CCS support Matt Roper
2021-03-13 0:24 ` Srivatsa, Anusha
2021-03-11 22:36 ` [Intel-gfx] [PATCH 55/56] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-03-12 20:37 ` Dixit, Ashutosh
2021-03-11 22:36 ` [Intel-gfx] [PATCH 56/56] drm/i915/display/adl_p: Implement PSR changes Matt Roper
2021-03-13 19:49 ` Mun, Gwan-gyeong
2021-03-11 22:48 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Alder Lake-P Patchwork
2021-03-11 22:50 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-11 23:14 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210311223632.3191939-17-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox