From: Matt Atwood <matthew.s.atwood@intel.com>
To: Matt Roper <matthew.d.roper@intel.com>;, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 45/50] drm/i915/dg2: Classify DG2 PHY types
Date: Fri, 16 Jul 2021 13:50:22 -0700 [thread overview]
Message-ID: <20210716205022.GA19458@msatwood-mobl> (raw)
In-Reply-To: <20210714031540.3539704-46-matthew.d.roper@intel.com>
On Tue, Jul 13, 2021 at 08:15:35PM -0700, Matt Roper wrote:
> Although the bspec labels four of DG2's outputs as "combo PHY," the
> underlying PHYs in both cases are actually Synopsys PHYs that are
> programmed completely differently than the traditional Intel "combo" PHY
> units. As such, we don't want intel_phy_is_combo to take us down legacy
> programming paths, so just return false from it on DG2. Instead add a
> new intel_phy_is_snps() that will return true for all DG2 PHYs.
>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Cc: Matt Atwood <matthew.s.atwood@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 26 +++++++++++++++++++-
> drivers/gpu/drm/i915/display/intel_display.h | 1 +
> 2 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 6f532b695b29..90d4efba466b 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3698,6 +3698,13 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
> {
> if (phy == PHY_NONE)
> return false;
> + else if (IS_DG2(dev_priv))
> + /*
> + * DG2 outputs labelled as "combo PHY" in the bspec use
> + * SNPS PHYs with completely different programming,
> + * hence we always return false here.
> + */
> + return false;
> else if (IS_ALDERLAKE_S(dev_priv))
> return phy <= PHY_E;
> else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
> @@ -3712,7 +3719,10 @@ bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
>
> bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
> {
> - if (IS_ALDERLAKE_P(dev_priv))
> + if (IS_DG2(dev_priv))
> + /* DG2's "TC1" output uses a SNPS PHY */
> + return false;
> + else if (IS_ALDERLAKE_P(dev_priv))
> return phy >= PHY_F && phy <= PHY_I;
> else if (IS_TIGERLAKE(dev_priv))
> return phy >= PHY_D && phy <= PHY_I;
> @@ -3722,6 +3732,20 @@ bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
> return false;
> }
>
> +bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy)
> +{
> + if (phy == PHY_NONE)
> + return false;
> + else if (IS_DG2(dev_priv))
> + /*
> + * All four "combo" ports and the TC1 port (PHY E) use
> + * Synopsis PHYs.
> + */
> + return phy <= PHY_E;
> +
> + return false;
> +}
> +
> enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
> {
> if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD)
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index c9dbaf074d77..284936f0ddab 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -561,6 +561,7 @@ struct drm_display_mode *
> intel_encoder_current_mode(struct intel_encoder *encoder);
> bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy);
> bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy);
> +bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy);
> enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv,
> enum port port);
> int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
> --
> 2.25.4
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-07-16 20:50 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-14 3:14 [Intel-gfx] [PATCH v2 00/50] Begin enabling Xe_HP SDV and DG2 platforms Matt Roper
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 01/50] drm/i915: Add XE_HP initial definitions Matt Roper
2021-07-19 18:05 ` Souza, Jose
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 02/50] drm/i915: Fork DG1 interrupt handler Matt Roper
2021-07-19 21:18 ` Matt Atwood
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 03/50] drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based Matt Roper
2021-07-19 21:20 ` Matt Atwood
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 04/50] drm/i915/gen12: Use fuse info to enable SFC Matt Roper
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 05/50] drm/i915/selftests: Allow for larger engine counts Matt Roper
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 06/50] drm/i915/xehp: Extra media engines - Part 1 (engine definitions) Matt Roper
2021-07-20 23:03 ` Lucas De Marchi
2021-07-20 23:40 ` John Harrison
2021-07-20 23:49 ` Lucas De Marchi
2021-07-21 18:23 ` Lucas De Marchi
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 07/50] drm/i915/xehp: Extra media engines - Part 2 (interrupts) Matt Roper
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 08/50] drm/i915/xehp: Extra media engines - Part 3 (reset) Matt Roper
2021-07-19 18:13 ` Souza, Jose
2021-07-20 20:39 ` Matt Atwood
2021-07-14 3:14 ` [Intel-gfx] [PATCH v2 09/50] drm/i915/xehp: Xe_HP forcewake support Matt Roper
2021-07-20 20:57 ` Matt Atwood
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 10/50] drm/i915/xehp: Define multicast register ranges Matt Roper
2021-07-19 18:19 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 11/50] drm/i915/xehp: Handle new device context ID format Matt Roper
2021-07-20 21:39 ` Matt Atwood
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 12/50] drm/i915/xehp: New engine context offsets Matt Roper
2021-07-20 22:06 ` Matt Atwood
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 13/50] drm/i915/xehp: handle new steering options Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 14/50] drm/i915/xehp: Loop over all gslices for INSTDONE processing Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 15/50] drm/i915/xehpsdv: add initial XeHP SDV definitions Matt Roper
2021-07-19 18:20 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 16/50] drm/i915/xehp: Changes to ss/eu definitions Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 17/50] drm/i915/xehpsdv: Add maximum sseu limits Matt Roper
2021-07-18 13:10 ` Yokoyama, Caz
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 18/50] drm/i915/xehpsdv: Add compute DSS type Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 19/50] drm/i915/xehpsdv: Define steering tables Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 20/50] drm/i915/xehpsdv: Define MOCS table for XeHP SDV Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 21/50] drm/i915/xehpsdv: factor out function to read RP_STATE_CAP Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 22/50] drm/i915/xehpsdv: Read correct RP_STATE_CAP register Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 23/50] drm/i915/dg2: add DG2 platform info Matt Roper
2021-07-19 18:21 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 24/50] drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV Matt Roper
2021-07-16 16:06 ` Yokoyama, Caz
2021-07-19 18:22 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 25/50] drm/i915/dg2: Add forcewake table Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 26/50] drm/i915/dg2: Update LNCF steering ranges Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 27/50] drm/i915/dg2: Add SQIDI steering Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 28/50] drm/i915/dg2: Add new LRI reg offsets Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 29/50] drm/i915/dg2: Maintain backward-compatible nested batch behavior Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 30/50] drm/i915/dg2: Report INSTDONE_GEOM values in error state Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 31/50] drm/i915/dg2: Define MOCS table for DG2 Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 32/50] drm/i915/dg2: Add fake PCH Matt Roper
2021-07-16 19:52 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 33/50] drm/i915/dg2: Add cdclk table and reference clock Matt Roper
2021-07-16 19:36 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 34/50] drm/i915/dg2: Skip shared DPLL handling Matt Roper
2021-07-16 19:38 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 35/50] drm/i915/dg2: Don't wait for AUX power well enable ACKs Matt Roper
2021-07-16 19:40 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 36/50] drm/i915/dg2: Setup display outputs Matt Roper
2021-07-16 19:40 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 37/50] drm/i915/dg2: Add dbuf programming Matt Roper
2021-07-16 19:45 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 38/50] drm/i915/dg2: Don't program BW_BUDDY registers Matt Roper
2021-07-16 19:47 ` Souza, Jose
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 39/50] drm/i915/dg2: Don't read DRAM info Matt Roper
2021-07-15 17:17 ` Srivatsa, Anusha
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 40/50] drm/i915/dg2: DG2 has fixed memory bandwidth Matt Roper
2021-07-21 17:42 ` Srivatsa, Anusha
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 41/50] drm/i915/dg2: Add MPLLB programming for SNPS PHY Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 42/50] drm/i915/dg2: Add MPLLB programming for HDMI Matt Roper
2021-07-16 21:13 ` Matt Atwood
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 43/50] drm/i915/dg2: Add vswing programming for SNPS phys Matt Roper
2021-07-16 21:38 ` Matt Atwood
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 44/50] drm/i915/dg2: Update modeset sequences Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 45/50] drm/i915/dg2: Classify DG2 PHY types Matt Roper
2021-07-16 20:50 ` Matt Atwood [this message]
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 46/50] drm/i915/dg2: Wait for SNPS PHY calibration during display init Matt Roper
2021-07-16 20:52 ` Matt Atwood
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 47/50] drm/i915/dg2: Update lane disable power state during PSR Matt Roper
2021-07-21 17:55 ` Srivatsa, Anusha
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 48/50] drm/i915/dg2: Add DG2 to the PSR2 defeature list Matt Roper
2021-07-21 17:56 ` Srivatsa, Anusha
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 49/50] drm/i915/dg2: Update to bigjoiner path Matt Roper
2021-07-14 3:15 ` [Intel-gfx] [PATCH v2 50/50] drm/i915/dg2: Configure PCON in DP pre-enable path Matt Roper
2021-07-14 4:23 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Begin enabling Xe_HP SDV and DG2 platforms (rev5) Patchwork
2021-07-14 4:24 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-07-14 4:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-07-14 15:12 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210716205022.GA19458@msatwood-mobl \
--to=matthew.s.atwood@intel.com \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox