[Intel-gfx] [PATCH 03/21] drm/i915/wm: move the update watermark wrapper to display side.

[Dave Airlie <airlied@gmail.com>]

From: Dave Airlie <airlied@redhat.com>

A vague goal is to have the vfunc table be the api between
wm and display, not having direction function calls cross
the boundary.

This aligns the legacy update_wm with the newer vfuncs.

The comment probably needs to live somewhere else, it seems
like it should live in the pm side though not the display side,
but I brought it along for the ride.
---
 drivers/gpu/drm/i915/display/intel_display.c | 40 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_pm.c              | 39 -------------------
 drivers/gpu/drm/i915/intel_pm.h              |  1 -
 3 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index d95283bf2631..b495371c1889 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -125,6 +125,46 @@ static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
 static void intel_modeset_setup_hw_state(struct drm_device *dev,
 					 struct drm_modeset_acquire_ctx *ctx);
 
+
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ * @crtc: the #intel_crtc on which to compute the WM
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ *   - normal (i.e. non-self-refresh)
+ *   - self-refresh (SR) mode
+ *   - lines are large relative to FIFO size (buffer can hold up to 2)
+ *   - lines are small relative to FIFO size (buffer can hold more than 2
+ *     lines), so need to account for TLB latency
+ *
+ *   The normal calculation is:
+ *     watermark = dotclock * bytes per pixel * latency
+ *   where latency is platform & configuration dependent (we assume pessimal
+ *   values here).
+ *
+ *   The SR calculation is:
+ *     watermark = (trunc(latency/line time)+1) * surface width *
+ *       bytes per pixel
+ *   where
+ *     line time = htotal / dotclock
+ *     surface width = hdisplay for normal plane and 64 for cursor
+ *   and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that.  And on Crestline we have
+ * to set the non-SR watermarks to 8.
+ */
+static void intel_update_watermarks(struct drm_i915_private *dev_priv)
+{
+	if (dev_priv->display.update_wm)
+		dev_priv->display.update_wm(dev_priv);
+}
+
 /* returns HPLL frequency in kHz */
 int vlv_get_hpll_vco(struct drm_i915_private *dev_priv)
 {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 406baa49e6ad..4054c6f7a2f9 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -7132,45 +7132,6 @@ void ilk_wm_get_hw_state(struct drm_i915_private *dev_priv)
 		!(intel_uncore_read(&dev_priv->uncore, DISP_ARB_CTL) & DISP_FBC_WM_DIS);
 }
 
-/**
- * intel_update_watermarks - update FIFO watermark values based on current modes
- * @crtc: the #intel_crtc on which to compute the WM
- *
- * Calculate watermark values for the various WM regs based on current mode
- * and plane configuration.
- *
- * There are several cases to deal with here:
- *   - normal (i.e. non-self-refresh)
- *   - self-refresh (SR) mode
- *   - lines are large relative to FIFO size (buffer can hold up to 2)
- *   - lines are small relative to FIFO size (buffer can hold more than 2
- *     lines), so need to account for TLB latency
- *
- *   The normal calculation is:
- *     watermark = dotclock * bytes per pixel * latency
- *   where latency is platform & configuration dependent (we assume pessimal
- *   values here).
- *
- *   The SR calculation is:
- *     watermark = (trunc(latency/line time)+1) * surface width *
- *       bytes per pixel
- *   where
- *     line time = htotal / dotclock
- *     surface width = hdisplay for normal plane and 64 for cursor
- *   and latency is assumed to be high, as above.
- *
- * The final value programmed to the register should always be rounded up,
- * and include an extra 2 entries to account for clock crossings.
- *
- * We don't use the sprite, so we can ignore that.  And on Crestline we have
- * to set the non-SR watermarks to 8.
- */
-void intel_update_watermarks(struct drm_i915_private *dev_priv)
-{
-	if (dev_priv->display.update_wm)
-		dev_priv->display.update_wm(dev_priv);
-}
-
 void intel_enable_ipc(struct drm_i915_private *dev_priv)
 {
 	u32 val;
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index 99bce0b4f5fb..990cdcaf85ce 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -29,7 +29,6 @@ struct skl_wm_level;
 void intel_init_clock_gating(struct drm_i915_private *dev_priv);
 void intel_suspend_hw(struct drm_i915_private *dev_priv);
 int ilk_wm_max_level(const struct drm_i915_private *dev_priv);
-void intel_update_watermarks(struct drm_i915_private *dev_priv);
 void intel_init_pm(struct drm_i915_private *dev_priv);
 void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv);
 void intel_pm_setup(struct drm_i915_private *dev_priv);
-- 
2.31.1