From: Michael Cheng <michael.cheng@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: michael.cheng@intel.com, wayne.boyer@intel.com,
jani.nikula@intel.com, lucas.demarchi@intel.com,
siva.mullati@intel.com
Subject: [Intel-gfx] [PATCH v4 1/3] drm/i915: Introduce new macros for i915 PTE
Date: Wed, 10 Nov 2021 16:45:47 -0800 [thread overview]
Message-ID: <20211111004549.144706-2-michael.cheng@intel.com> (raw)
In-Reply-To: <20211111004549.144706-1-michael.cheng@intel.com>
Certain functions within i915 uses macros that are defined for
specific architectures by the mmu, such as _PAGE_RW and _PAGE_PRESENT
(Some architectures don't even have these macros defined, like ARM64).
Instead of re-using bits defined for the CPU, we should use bits
defined for i915. This patch introduces two new macros,
I915_PAGE_PRESENT and I915_PAGE_RW, to check for bits 0 and 1 and, to
replace all occurrences of _PAGE_RW and _PAGE_PRESENT within i915.
Looking at the bspecs for pre gen 12 and gen 12, bit 0 and 1 are the
same throughout the generations.
Signed-off-by: Michael Cheng <michael.cheng@intel.com>
---
drivers/gpu/drm/i915/gt/gen8_ppgtt.c | 6 +++---
drivers/gpu/drm/i915/gt/intel_ggtt.c | 2 +-
drivers/gpu/drm/i915/gt/intel_gtt.h | 3 +++
drivers/gpu/drm/i915/gvt/gtt.c | 12 ++++++------
4 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
index 9966e9dc5218..f89b50ffc286 100644
--- a/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
+++ b/drivers/gpu/drm/i915/gt/gen8_ppgtt.c
@@ -18,7 +18,7 @@
static u64 gen8_pde_encode(const dma_addr_t addr,
const enum i915_cache_level level)
{
- u64 pde = addr | _PAGE_PRESENT | _PAGE_RW;
+ u64 pde = addr | I915_PAGE_PRESENT | I915_PAGE_RW;
if (level != I915_CACHE_NONE)
pde |= PPAT_CACHED_PDE;
@@ -32,10 +32,10 @@ static u64 gen8_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
- gen8_pte_t pte = addr | _PAGE_PRESENT | _PAGE_RW;
+ gen8_pte_t pte = addr | I915_PAGE_PRESENT | I915_PAGE_RW;
if (unlikely(flags & PTE_READ_ONLY))
- pte &= ~_PAGE_RW;
+ pte &= ~I915_PAGE_RW;
if (flags & PTE_LM)
pte |= GEN12_PPGTT_PTE_LM;
diff --git a/drivers/gpu/drm/i915/gt/intel_ggtt.c b/drivers/gpu/drm/i915/gt/intel_ggtt.c
index 1fb4a03d7ac3..3f8e1ee0fbfa 100644
--- a/drivers/gpu/drm/i915/gt/intel_ggtt.c
+++ b/drivers/gpu/drm/i915/gt/intel_ggtt.c
@@ -207,7 +207,7 @@ u64 gen8_ggtt_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
- gen8_pte_t pte = addr | _PAGE_PRESENT;
+ gen8_pte_t pte = addr | I915_PAGE_PRESENT;
if (flags & PTE_LM)
pte |= GEN12_GGTT_PTE_LM;
diff --git a/drivers/gpu/drm/i915/gt/intel_gtt.h b/drivers/gpu/drm/i915/gt/intel_gtt.h
index dfeaef680aac..fba9c0c18f4a 100644
--- a/drivers/gpu/drm/i915/gt/intel_gtt.h
+++ b/drivers/gpu/drm/i915/gt/intel_gtt.h
@@ -39,6 +39,9 @@
#define NALLOC 3 /* 1 normal, 1 for concurrent threads, 1 for preallocation */
+#define I915_PAGE_PRESENT BIT_ULL(0)
+#define I915_PAGE_RW BIT_ULL(1)
+
#define I915_GTT_PAGE_SIZE_4K BIT_ULL(12)
#define I915_GTT_PAGE_SIZE_64K BIT_ULL(16)
#define I915_GTT_PAGE_SIZE_2M BIT_ULL(21)
diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index 53d0cb327539..8f6a055854f7 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -446,17 +446,17 @@ static bool gen8_gtt_test_present(struct intel_gvt_gtt_entry *e)
|| e->type == GTT_TYPE_PPGTT_ROOT_L4_ENTRY)
return (e->val64 != 0);
else
- return (e->val64 & _PAGE_PRESENT);
+ return (e->val64 & I915_PAGE_PRESENT);
}
static void gtt_entry_clear_present(struct intel_gvt_gtt_entry *e)
{
- e->val64 &= ~_PAGE_PRESENT;
+ e->val64 &= ~I915_PAGE_PRESENT;
}
static void gtt_entry_set_present(struct intel_gvt_gtt_entry *e)
{
- e->val64 |= _PAGE_PRESENT;
+ e->val64 |= I915_PAGE_PRESENT;
}
static bool gen8_gtt_test_64k_splited(struct intel_gvt_gtt_entry *e)
@@ -2439,7 +2439,7 @@ static int alloc_scratch_pages(struct intel_vgpu *vgpu,
/* The entry parameters like present/writeable/cache type
* set to the same as i915's scratch page tree.
*/
- se.val64 |= _PAGE_PRESENT | _PAGE_RW;
+ se.val64 |= I915_PAGE_PRESENT | I915_PAGE_RW;
if (type == GTT_TYPE_PPGTT_PDE_PT)
se.val64 |= PPAT_CACHED;
@@ -2896,7 +2896,7 @@ void intel_gvt_restore_ggtt(struct intel_gvt *gvt)
offset = vgpu_aperture_gmadr_base(vgpu) >> PAGE_SHIFT;
for (idx = 0; idx < num_low; idx++) {
pte = mm->ggtt_mm.host_ggtt_aperture[idx];
- if (pte & _PAGE_PRESENT)
+ if (pte & I915_PAGE_PRESENT)
write_pte64(vgpu->gvt->gt->ggtt, offset + idx, pte);
}
@@ -2904,7 +2904,7 @@ void intel_gvt_restore_ggtt(struct intel_gvt *gvt)
offset = vgpu_hidden_gmadr_base(vgpu) >> PAGE_SHIFT;
for (idx = 0; idx < num_hi; idx++) {
pte = mm->ggtt_mm.host_ggtt_hidden[idx];
- if (pte & _PAGE_PRESENT)
+ if (pte & I915_PAGE_PRESENT)
write_pte64(vgpu->gvt->gt->ggtt, offset + idx, pte);
}
}
--
2.25.1
next prev parent reply other threads:[~2021-11-11 0:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-11 0:45 [Intel-gfx] [PATCH v4 0/3] Introduce new i915 macros for checking PTEs Michael Cheng
2021-11-11 0:45 ` Michael Cheng [this message]
2021-11-13 1:28 ` [Intel-gfx] [PATCH v4 1/3] drm/i915: Introduce new macros for i915 PTE Matt Roper
2021-11-13 1:31 ` Matt Roper
2021-11-13 1:42 ` Michael Cheng
2021-11-13 1:47 ` Matt Roper
2021-11-13 16:22 ` Lucas De Marchi
2021-11-17 22:29 ` Lucas De Marchi
2021-11-13 16:20 ` Lucas De Marchi
2021-11-11 0:45 ` [Intel-gfx] [PATCH v4 2/3] drm/i915: Clean up GEN6 page valid macros Michael Cheng
2021-11-11 0:45 ` [Intel-gfx] [PATCH v4 3/3] drm/i915: Clean up BYT_PTE_WRITEABLE Michael Cheng
2021-11-11 1:30 ` [Intel-gfx] ✓ Fi.CI.BAT: success for Introduce new i915 macros for checking PTEs (rev4) Patchwork
2021-11-11 3:20 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211111004549.144706-2-michael.cheng@intel.com \
--to=michael.cheng@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=lucas.demarchi@intel.com \
--cc=siva.mullati@intel.com \
--cc=wayne.boyer@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox