[Intel-gfx] [RFC 15/33] drm/i915/color: Add lut range for HDR planes

[Uma Shankar <uma.shankar@intel.com>]

Add lut range information for HDR planes. This is used to
hint the userspace what kind of LUT values are needed by
the hardware block. Pre-CSC and Post-CSC blocks have
different lut ranges for HDR planes.

Co-developed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
---
 drivers/gpu/drm/i915/display/intel_color.c | 108 +++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
index 3900e3748a0e..58b6d70043ca 100644
--- a/drivers/gpu/drm/i915/display/intel_color.c
+++ b/drivers/gpu/drm/i915/display/intel_color.c
@@ -3833,6 +3833,114 @@ static const struct drm_color_lut_range xelpd_pre_post_csc_sdr[] = {
 	},
 };
 
+/* FIXME input bpc? */
+static const struct drm_color_lut_range xelpd_pre_csc_hdr[] = {
+	/* segment 1 */
+	{
+		.flags = (DRM_MODE_LUT_PRE_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 128,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = 0, .end = (1 << 24) - 1,
+		.min = 0, .max = (1 << 24) - 1,
+	},
+	/* segment 2 */
+	{
+		.flags = (DRM_MODE_LUT_PRE_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_REUSE_LAST |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 1,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = (1 << 24) - 1, .end = 1 << 24,
+		.min = 0, .max = (1 << 27) - 1,
+	},
+	/* Segment 3 */
+	{
+		.flags = (DRM_MODE_LUT_PRE_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_REUSE_LAST |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 1,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = 1 << 24, .end = 3 << 24,
+		.min = 0, .max = (1 << 27) - 1,
+	},
+	/* Segment 4 */
+	{
+		.flags = (DRM_MODE_LUT_PRE_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_REUSE_LAST |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 1,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = 3 << 24, .end = 7 << 24,
+		.min = 0, .max = (1 << 27) - 1,
+	},
+};
+
+/* FIXME input bpc? */
+static const struct drm_color_lut_range xelpd_post_csc_hdr[] = {
+	/*
+	 * ToDo: Add Segment 1
+	 * There is an optional fine segment added with 9 lut values
+	 * Will be added later
+	 */
+
+	/* segment 2 */
+	{
+		.flags = (DRM_MODE_LUT_POST_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 32,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = 0, .end = (1 << 24) - 1,
+		.min = 0, .max = (1 << 24) - 1,
+	},
+	/* segment 3 */
+	{
+		.flags = (DRM_MODE_LUT_POST_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_REUSE_LAST |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 1,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = (1 << 24) - 1, .end = 1 << 24,
+		.min = 0, .max = 1 << 24,
+	},
+	/* Segment 4 */
+	{
+		.flags = (DRM_MODE_LUT_POST_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_REUSE_LAST |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 1,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = 1 << 24, .end = 3 << 24,
+		.min = 0, .max = (3 << 24),
+	},
+	/* Segment 5 */
+	{
+		.flags = (DRM_MODE_LUT_POST_CSC |
+			  DRM_MODE_LUT_REFLECT_NEGATIVE |
+			  DRM_MODE_LUT_INTERPOLATE |
+			  DRM_MODE_LUT_REUSE_LAST |
+			  DRM_MODE_LUT_NON_DECREASING),
+		.count = 1,
+		.input_bpc = 24, .output_bpc = 16,
+		.start = 3 << 24, .end = 7 << 24,
+		.min = 0, .max = (7 << 24),
+	},
+};
+
 void intel_color_crtc_init(struct intel_crtc *crtc)
 {
 	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
-- 
2.38.1