From: "Jouni Högander" <jouni.hogander@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: "Jouni Högander" <jouni.hogander@intel.com>,
"Animesh Manna" <animesh.manna@intel.com>
Subject: [PATCH v7 03/13] drm/i915/psr: Split setting sff and cff bits away from intel_psr_force_update
Date: Wed, 12 Feb 2025 09:57:31 +0200 [thread overview]
Message-ID: <20250212075742.995022-4-jouni.hogander@intel.com> (raw)
In-Reply-To: <20250212075742.995022-1-jouni.hogander@intel.com>
This is a clean-up and a preparation for adding own SFF and CFF registers
for LunarLake onwards.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
---
drivers/gpu/drm/i915/display/intel_psr.c | 88 +++++++++---------------
1 file changed, 31 insertions(+), 57 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 16d125f51ab0..c0ba74c16d16 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -2327,15 +2327,6 @@ static u32 man_trk_ctl_continuos_full_frame(struct intel_display *display)
static void intel_psr_force_update(struct intel_dp *intel_dp)
{
struct intel_display *display = to_intel_display(intel_dp);
- enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
-
- if (intel_dp->psr.psr2_sel_fetch_enabled)
- intel_de_write(display,
- PSR2_MAN_TRK_CTL(display, cpu_transcoder),
- man_trk_ctl_enable_bit_get(display) |
- man_trk_ctl_partial_frame_bit_get(display) |
- man_trk_ctl_single_full_frame_bit_get(display) |
- man_trk_ctl_continuos_full_frame(display));
/*
* Display WA #0884: skl+
@@ -3131,31 +3122,31 @@ static void intel_psr_work(struct work_struct *work)
mutex_unlock(&intel_dp->psr.lock);
}
-static void _psr_invalidate_handle(struct intel_dp *intel_dp)
+static void intel_psr_configure_full_frame_update(struct intel_dp *intel_dp)
{
struct intel_display *display = to_intel_display(intel_dp);
enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
- if (intel_dp->psr.psr2_sel_fetch_enabled) {
- u32 val;
+ if (!intel_dp->psr.psr2_sel_fetch_enabled)
+ return;
- if (intel_dp->psr.psr2_sel_fetch_cff_enabled) {
- /* Send one update otherwise lag is observed in screen */
- intel_de_write(display,
- CURSURFLIVE(display, intel_dp->psr.pipe),
- 0);
- return;
+ intel_de_write(display,
+ PSR2_MAN_TRK_CTL(display, cpu_transcoder),
+ man_trk_ctl_enable_bit_get(display) |
+ man_trk_ctl_partial_frame_bit_get(display) |
+ man_trk_ctl_single_full_frame_bit_get(display) |
+ man_trk_ctl_continuos_full_frame(display));
+}
+
+static void _psr_invalidate_handle(struct intel_dp *intel_dp)
+{
+ if (intel_dp->psr.psr2_sel_fetch_enabled) {
+ if (!intel_dp->psr.psr2_sel_fetch_cff_enabled) {
+ intel_dp->psr.psr2_sel_fetch_cff_enabled = true;
+ intel_psr_configure_full_frame_update(intel_dp);
}
- val = man_trk_ctl_enable_bit_get(display) |
- man_trk_ctl_partial_frame_bit_get(display) |
- man_trk_ctl_continuos_full_frame(display);
- intel_de_write(display,
- PSR2_MAN_TRK_CTL(display, cpu_transcoder),
- val);
- intel_de_write(display,
- CURSURFLIVE(display, intel_dp->psr.pipe), 0);
- intel_dp->psr.psr2_sel_fetch_cff_enabled = true;
+ intel_psr_force_update(intel_dp);
} else {
intel_psr_exit(intel_dp);
}
@@ -3236,44 +3227,27 @@ static void _psr_flush_handle(struct intel_dp *intel_dp)
{
struct intel_display *display = to_intel_display(intel_dp);
struct drm_i915_private *dev_priv = to_i915(display->drm);
- enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
if (intel_dp->psr.psr2_sel_fetch_enabled) {
if (intel_dp->psr.psr2_sel_fetch_cff_enabled) {
/* can we turn CFF off? */
- if (intel_dp->psr.busy_frontbuffer_bits == 0) {
- u32 val = man_trk_ctl_enable_bit_get(display) |
- man_trk_ctl_partial_frame_bit_get(display) |
- man_trk_ctl_single_full_frame_bit_get(display) |
- man_trk_ctl_continuos_full_frame(display);
-
- /*
- * Set psr2_sel_fetch_cff_enabled as false to allow selective
- * updates. Still keep cff bit enabled as we don't have proper
- * SU configuration in case update is sent for any reason after
- * sff bit gets cleared by the HW on next vblank.
- */
- intel_de_write(display,
- PSR2_MAN_TRK_CTL(display, cpu_transcoder),
- val);
- intel_de_write(display,
- CURSURFLIVE(display, intel_dp->psr.pipe),
- 0);
+ if (intel_dp->psr.busy_frontbuffer_bits == 0)
intel_dp->psr.psr2_sel_fetch_cff_enabled = false;
- }
- } else {
- /*
- * continuous full frame is disabled, only a single full
- * frame is required
- */
- intel_psr_force_update(intel_dp);
}
- } else {
- intel_psr_force_update(intel_dp);
- if (!intel_dp->psr.active && !intel_dp->psr.busy_frontbuffer_bits)
- queue_work(dev_priv->unordered_wq, &intel_dp->psr.work);
+ /*
+ * Still keep cff bit enabled as we don't have proper SU
+ * configuration in case update is sent for any reason after
+ * sff bit gets cleared by the HW on next vblank.
+ */
+ intel_psr_configure_full_frame_update(intel_dp);
}
+
+ intel_psr_force_update(intel_dp);
+
+ if (!intel_dp->psr.psr2_sel_fetch_enabled && !intel_dp->psr.active &&
+ !intel_dp->psr.busy_frontbuffer_bits)
+ queue_work(dev_priv->unordered_wq, &intel_dp->psr.work);
}
/**
--
2.43.0
next prev parent reply other threads:[~2025-02-12 7:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-12 7:57 [PATCH v7 00/13] PSR DSB support Jouni Högander
2025-02-12 7:57 ` [PATCH v7 01/13] drm/i915/psr: Use PSR2_MAN_TRK_CTL CFF bit only to send full update Jouni Högander
2025-02-12 10:25 ` Manna, Animesh
2025-02-12 7:57 ` [PATCH v7 02/13] drm/i915/psr: Rename psr_force_hw_tracking_exit as intel_psr_force_update Jouni Högander
2025-02-12 7:57 ` Jouni Högander [this message]
2025-02-12 7:57 ` [PATCH v7 04/13] drm/i915/psr: Add register definitions for SFF_CTL and CFF_CTL registers Jouni Högander
2025-02-12 7:57 ` [PATCH v7 05/13] drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards Jouni Högander
2025-02-12 7:57 ` [PATCH v7 06/13] drm/i915/psr: Allow writing PSR2_MAN_TRK_CTL using DSB Jouni Högander
2025-02-12 7:57 ` [PATCH v7 07/13] drm/i915/psr: Changes for PSR2_MAN_TRK_CTL handling when DSB is in use Jouni Högander
2025-02-12 7:57 ` [PATCH v7 07/13] drm/i915/psr: Write PSR2_MAN_TRK_CTL on DSB commit as well Jouni Högander
2025-02-12 7:57 ` [PATCH v7 08/13] drm/i915/display: Warn on use_dsb in non-dsb pipe update functions Jouni Högander
2025-02-12 14:51 ` Ville Syrjälä
2025-02-12 7:57 ` [PATCH v7 09/13] drm/i915/psr: Remove DSB_SKIP_WAITS_EN chicken bit Jouni Högander
2025-02-12 7:57 ` [PATCH v7 10/13] drm/i915/display: Evade scanline 0 as well if PSR1 or PSR2 is enabled Jouni Högander
2025-02-12 7:57 ` [PATCH v7 11/13] drm/i915/psr: Add function for triggering "Frame Change" event Jouni Högander
2025-02-12 7:57 ` [PATCH v7 12/13] drm/i915/display: Ensure we have "Frame Change" event in DSB commit Jouni Högander
2025-02-12 7:57 ` [PATCH v7 13/13] drm/i915/psr: Allow DSB usage when PSR is enabled Jouni Högander
2025-02-12 14:52 ` Ville Syrjälä
2025-02-12 18:22 ` Hogander, Jouni
2025-02-12 18:52 ` Ville Syrjälä
2025-02-12 9:06 ` ✗ Fi.CI.SPARSE: warning for PSR DSB support (rev9) Patchwork
2025-02-12 9:34 ` ✓ i915.CI.BAT: success " Patchwork
2025-02-12 14:33 ` ✗ i915.CI.Full: failure " Patchwork
2025-02-13 6:08 ` Hogander, Jouni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250212075742.995022-4-jouni.hogander@intel.com \
--to=jouni.hogander@intel.com \
--cc=animesh.manna@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox