[PATCH v4 05/17] drm/i915/display: Add VRR DC balance registers

[Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>]

Add VRR register offsets and bits to access DC Balance configuration.

--v2:
- Separate register definitions. (Ankit)
- Remove usage of dev_priv. (Jani, Nikula)

Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
---
 drivers/gpu/drm/i915/display/intel_vrr_regs.h | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_vrr_regs.h b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
index 6ed0e0dc97e7..8a10aec4f3cc 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_vrr_regs.h
@@ -9,6 +9,54 @@
 #include "intel_display_reg_defs.h"
 
 /* VRR registers */
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A		0x604D4
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B		0x614D4
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_C		0x624D4
+#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_D		0x634D4
+#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG(display, \
+				       trans)	_MMIO_TRANS2(display, trans, \
+							     _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A)
+
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A			0x604D8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B			0x614D8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_C			0x624D8
+#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_D			0x634D8
+#define TRANS_VRR_DCB_ADJ_VMAX_CFG(display, trans)	_MMIO_TRANS2(display, \
+								     trans, \
+								     _TRANS_VRR_DCB_ADJ_VMAX_CFG_A)
+
+#define _TRANS_VRR_FLIPLINE_DCB_A			0x60418
+#define _TRANS_VRR_FLIPLINE_DCB_B			0x61418
+#define _TRANS_VRR_FLIPLINE_DCB_C			0x62418
+#define _TRANS_VRR_FLIPLINE_DCB_D			0x63418
+#define TRANS_VRR_FLIPLINE_DCB(display, trans)		_MMIO_TRANS2(display, \
+								     trans, \
+								     _TRANS_VRR_FLIPLINE_DCB_A)
+
+#define _TRANS_VRR_VMAX_DCB_A				0x60414
+#define _TRANS_VRR_VMAX_DCB_B				0x61414
+#define _TRANS_VRR_VMAX_DCB_C				0x62414
+#define _TRANS_VRR_VMAX_DCB_D				0x63414
+#define TRANS_VRR_VMAX_DCB(display, trans)		_MMIO_TRANS2(display, \
+								     trans, \
+								     _TRANS_VRR_VMAX_DCB_A)
+
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A			0x604C0
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B			0x614C0
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_C			0x624C0
+#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_D			0x634C0
+#define TRANS_ADAPTIVE_SYNC_DCB_CTL(display, trans)	_MMIO_TRANS2(display, \
+								     trans, \
+								     _TRANS_ADAPTIVE_SYNC_DCB_CTL_A)
+#define ADAPTIVE_SYNC_COUNTER_EN			REG_BIT(31)
+#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK			REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_FLIPLINE_MASK			REG_GENMASK(19, 0)
+#define VRR_DCB_ADJ_VMAX_CNT_MASK			REG_GENMASK(31, 24)
+#define VRR_DCB_ADJ_VMAX_MASK				REG_GENMASK(19, 0)
+#define VRR_FLIPLINE_DCB_MASK				REG_GENMASK(19, 0)
+#define VRR_VMAX_DCB_MASK				REG_GENMASK(19, 0)
+#define VRR_CTL_DCB_ADJ_ENABLE				REG_BIT(28)
+
 #define _TRANS_VRR_CTL_A			0x60420
 #define _TRANS_VRR_CTL_B			0x61420
 #define _TRANS_VRR_CTL_C			0x62420
-- 
2.48.1