[PATCH v3 04/13] drm/dp: Move from u16 to u32 for max in drm_edp_backlight_info

[Suraj Kandpal <suraj.kandpal@intel.com>]

Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
 drivers/gpu/drm/display/drm_dp_helper.c | 10 +++++++---
 include/drm/display/drm_dp_helper.h     |  2 +-
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index 9df95776d1cb..90b23f78a12d 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -4293,9 +4293,13 @@ drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl
 		return -EINVAL;
 	}
 
-	ret = drm_edp_backlight_probe_max(aux, bl, driver_pwm_freq_hz, edp_dpcd);
-	if (ret < 0)
-		return ret;
+	if (bl->luminance_set) {
+		bl->max = max_luminance;
+	} else {
+		ret = drm_edp_backlight_probe_max(aux, bl, driver_pwm_freq_hz, edp_dpcd);
+		if (ret < 0)
+			return ret;
+	}
 
 	ret = drm_edp_backlight_probe_state(aux, bl, current_mode);
 	if (ret < 0)
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index 91094a38594c..6176e0b5ea1a 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -850,7 +850,7 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk)
 struct drm_edp_backlight_info {
 	u8 pwmgen_bit_count;
 	u8 pwm_freq_pre_divider;
-	u16 max;
+	u32 max;
 
 	bool lsb_reg_used : 1;
 	bool aux_enable : 1;
-- 
2.34.1