From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org,
"Jouni Högander" <jouni.hogander@intel.com>
Subject: [PATCH 1/4] drm/i915/fb: Fix the set_tiling vs. addfb race, again
Date: Thu, 2 Oct 2025 14:54:31 +0300 [thread overview]
Message-ID: <20251002115434.6486-2-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20251002115434.6486-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
intel_frontbuffer_get() is what locks out subsequent set_tiling
changes to the bo. Thus the fence vs. modifier check must be done
after intel_frontbuffer_get(), or else a concurrent set_tiling ioctl
might sneak in and change the fence after the check has been done.
Close the race again. See commit dd689287b977 ("drm/i915: Prevent
concurrent tiling/framebuffer modifications") for the previous
instance.
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: 10690b8a49bc ("drm/i915/display: Add intel_fb_bo_framebuffer_fini")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_fb.c | 38 +++++++++++++------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_fb.c b/drivers/gpu/drm/i915/display/intel_fb.c
index 69237dabdae8..c5bbca7f2e8b 100644
--- a/drivers/gpu/drm/i915/display/intel_fb.c
+++ b/drivers/gpu/drm/i915/display/intel_fb.c
@@ -2218,15 +2218,17 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
int ret = -EINVAL;
int i;
- ret = intel_fb_bo_framebuffer_init(fb, obj, mode_cmd);
- if (ret)
- return ret;
-
+ /*
+ * intel_frontbuffer_get() must be done before
+ * intel_fb_bo_framebuffer_init() to avoid set_tiling vs. addfb race.
+ */
intel_fb->frontbuffer = intel_frontbuffer_get(obj);
- if (!intel_fb->frontbuffer) {
- ret = -ENOMEM;
- goto err;
- }
+ if (!intel_fb->frontbuffer)
+ return -ENOMEM;
+
+ ret = intel_fb_bo_framebuffer_init(fb, obj, mode_cmd);
+ if (ret)
+ goto err_frontbuffer_put;
ret = -EINVAL;
if (!drm_any_plane_has_format(display->drm,
@@ -2235,7 +2237,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
drm_dbg_kms(display->drm,
"unsupported pixel format %p4cc / modifier 0x%llx\n",
&mode_cmd->pixel_format, mode_cmd->modifier[0]);
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
}
max_stride = intel_fb_max_stride(display, mode_cmd->pixel_format,
@@ -2246,7 +2248,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR ?
"tiled" : "linear",
mode_cmd->pitches[0], max_stride);
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
}
/* FIXME need to adjust LINOFF/TILEOFF accordingly. */
@@ -2254,7 +2256,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
drm_dbg_kms(display->drm,
"plane 0 offset (0x%08x) must be 0\n",
mode_cmd->offsets[0]);
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
}
drm_helper_mode_fill_fb_struct(display->drm, fb, info, mode_cmd);
@@ -2264,7 +2266,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
drm_dbg_kms(display->drm, "bad plane %d handle\n", i);
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
}
stride_alignment = intel_fb_stride_alignment(fb, i);
@@ -2272,7 +2274,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
drm_dbg_kms(display->drm,
"plane %d pitch (%d) must be at least %u byte aligned\n",
i, fb->pitches[i], stride_alignment);
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
}
if (intel_fb_is_gen12_ccs_aux_plane(fb, i)) {
@@ -2282,7 +2284,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
drm_dbg_kms(display->drm,
"ccs aux plane %d pitch (%d) must be %d\n",
i, fb->pitches[i], ccs_aux_stride);
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
}
}
@@ -2291,7 +2293,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
ret = intel_fill_fb_info(display, intel_fb);
if (ret)
- goto err_frontbuffer_put;
+ goto err_bo_framebuffer_fini;
if (intel_fb_uses_dpt(fb)) {
struct i915_address_space *vm;
@@ -2317,10 +2319,10 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
err_free_dpt:
if (intel_fb_uses_dpt(fb))
intel_dpt_destroy(intel_fb->dpt_vm);
-err_frontbuffer_put:
- intel_frontbuffer_put(intel_fb->frontbuffer);
-err:
+err_bo_framebuffer_fini:
intel_fb_bo_framebuffer_fini(obj);
+err_frontbuffer_put:
+ intel_frontbuffer_put(intel_fb->frontbuffer);
return ret;
}
--
2.49.1
next prev parent reply other threads:[~2025-10-02 11:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-02 11:54 [PATCH 0/4] drm/i915: fb fixes and claenups Ville Syrjala
2025-10-02 11:54 ` Ville Syrjala [this message]
2025-10-02 13:59 ` [PATCH 1/4] drm/i915/fb: Fix the set_tiling vs. addfb race, again Jani Nikula
2025-10-02 16:41 ` Ville Syrjälä
2025-10-02 16:44 ` [PATCH v2 " Ville Syrjala
2025-10-02 11:54 ` [PATCH 2/4] drm/i915/fbdev: Select linear modifier explicitly Ville Syrjala
2025-10-02 14:25 ` Jani Nikula
2025-10-02 11:54 ` [PATCH 3/4] drm/i915/fb: Drop the 'fb' argument from intel_fb_bo_framebuffer_init() Ville Syrjala
2025-10-02 14:27 ` Jani Nikula
2025-10-02 11:54 ` [PATCH 4/4] drm/i915/wm: Use fb->modfier to check for tiled vs. untiled Ville Syrjala
2025-10-02 15:05 ` Jani Nikula
2025-10-02 15:41 ` ✓ i915.CI.BAT: success for drm/i915: fb fixes and claenups Patchwork
2025-10-02 18:53 ` ✓ i915.CI.BAT: success for drm/i915: fb fixes and claenups (rev2) Patchwork
2025-10-03 10:49 ` ✓ i915.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251002115434.6486-2-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jouni.hogander@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox